2M6.8Z - 2M200Z Taiwan Semiconductor

Transcription

1 2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC definition MECHANICAL DATA Case: DO-204AC (DO-5) Molding compound, UL flammability classification rating 94V-0 Part No. with suffix "H" means AEC-Q qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Pure tin plated leads, solderable per JESD22-B2 Meet JESD 20 class 2 whisker test Weight: 0.4g (approximately) DO-204AC (DO-5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERSTICS (T A =25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Steady state power dissipation at T L =75 C Lead lengths.375", 9.55mm (Note ) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load P D 2.0 Watts I FSM 5 A Operating junction temperature range T J - 55 to +75 C Storage temperature range T STG - 55 to +75 C Note : Mounted on Cu-Pad size mm x mm on PCB ORDERING INFORMATION PART NO. PART NO. PACKING CODE PACKING CODE PACKAGE PACKING A0 DO-5,500 / Ammo box 2MxxxZ H R0 G DO-5 3,500 / 3" Paper reel (Note ) B0 DO-5,000 / Bulk packing Note : "xxx" defines voltage from 6.8V (2M6.8Z) to 200V (2M200Z) EXAMPLE PREFERRED PART NO. PART NO. PART NO. PACKING CODE PACKING CODE 2M6.8ZHA0G 2M6.8Z H A0 G DESCRIPTION AEC-Q qualified Green compound

2 RATINGS AND CHARACTERISTICS CURVES (T A =25 C unless otherwise noted) Device (Notes ) Nominal Zener Voltage (Notes 2) Test Current Maximum Zener Impedance (Notes 3) Leakage Current Maximum Zener Current V I ZT I ZT Z I ZT Z I ZK I ZK I V R I ZM V ma Ω Ω ma μa V ma 2M6.8Z MZ M2Z M3Z M4Z M5Z M6Z M7Z M8Z M9Z M20Z M22Z M24Z M27Z M30Z M33Z M36Z M39Z M43Z M47Z M5Z M56Z M62Z M68Z M75Z M82Z M9Z MZ MZ M20Z M30Z M40Z M50Z M60Z M70Z M80Z M90Z M200Z Notes:. TOLERANCES - Standard Voltage tolerance = ±5%, tolerances may be considered as a special device 2. ZENER VOLTAGE(V Z ) MEASUREMENT - Zener voltage guaranteed when measured at 0.375"(9.5mm) from the body under 40ms ±ms current pulse and ambient temperature of 25 C 3. ZENER IMPEDANCE (Z Z ) DERIVATION - The zener impedance is derived from 60 cycles AC voltage, which results when an current having an rms value eqal to % of the DC zener current (I ZT or I ZK ) is superimposed on I ZT or I ZK 4. MAXIMUM ZENER CURRENT (I ZM ) NON-REPETITIVE - The rating listed in the electrical characteristics table is maximum peak non - repetitive reverse surge current of /2 sine wave of /20 second duration or equivalent square wave, superimposed on the test current I ZT, per JEDEC standard.

3 FIG. - TYPICAL THERMAL RESPONSE ΘJL(t,D)TRANSIENT THERMAL RESISTANCE JUNCTION-TO-LEAD( /W) 0. D=0.5 D=0.0 D=0.2 D=0 D=0.05 D=0.02 D=0. NOTE BELOW 0. SECOND, THERMAL RESPONSE CURVE IS APPLICABLE TO ANY LEAD LENGTH(L) PW, PULSE WIDTH, (ms) PPK t t2 SINGLE PULSE TJL=ΘJL()PPK Ppk, PEAKSURGE POWER(WATTS) 0 FIG. 2- MAXIMUM SURGE POWER RECTANGULAR NONREPETITIVE WAVEFORM T A =25 C PRIOR TO INITIAL PULSE 0. PW, PULSE WIDTH (ms) IR, REVERSE LEAKAGE AS SPECIFIED IN ELEC.CHAR, TABLE A FIG. 3- TYPICAL REVERSE LEAKAGE RANGE 0 NORMAL Vz (VOLTS) Vz, TEMPERATURE COEFFICIENT (mc/ FIG.4- UNIT VOLTS RANGE V I ZT V z, ZENER (VOLTS) Vz, TEMPERATURE COEFFICIENT (mc/ FIG.5 UNIT VOLTS RANGE V z, ZENER (VOLTS) V I ZT

4 FIG. 6- Vz = VOLTS FIG. 7- Vz = - 9 VOLTS I Z, ZENER CURRENT (ma) I Z, ZENER CURRENT (ma) Vz, ZENER VOLTAGE (VOLTS) Vz, ZENER VOLTAGE (VOLTS) FIG. 8- Vz = VOLTS FIG. 9- TYPICAL THERMAL RESISTANCE I Z, ZENER CURRENT (ma) JL, JUNCTION-LEAD THERMAL RESISTANCE( /W) Vz, ZENER VOLTAGE (VOLTS) L, LEAD LENGTH TO HEAT SINK (INCH)

5 PACKAGE OUTLINE DIMENSIONS DO-204AC (DO-5) DIM. Unit (mm) Unit (inch) Min Max Min Max A B C D E MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code

6 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale.