FT1R / FT1R-J Multi-Media Cable
|
|
- Paula Stephens
- 5 years ago
- Views:
Transcription
1 FT1R / FT1R-J Multi-Media Cable APPLICATIONS The FT1R / FT1R-J multi-media Cable consists of two (2) RG6 quad shield coax cables and two (2) CAT5e twisted pair cables. Installers can choose between speedwrapped or jacketed cable. The multi-media cable is used to distribute signals from the distribution panel to the rooms. The FT1R / FT1R-J multi-media cable comes on a 500 reel. FT1R Multi-Media Cable FT1R-J Jacketed Multi-Media Cable CAT5e Twisted Pair Cable Type Four (4) unshielded 100 OHM extended distance/extended frequency twisted pair data cable Usage Voice, 100 Mbps LAN applications Conductor material 24 AWG solid bare copper Conductor O.D..020 in., nominal Insulation material Polyolefin Insulation conductor O.D in., nominal Color Code Pair One White Blue / Blue Pair Two White Orange / Orange Pair Three White Green / Green Pair Four White Brown / Brown Jacket material Polyvinyl chloride Jacket Colors Blue / Yellow Nominal jacket thickness.018 in. Nominal overall.200 in. O. D. Minimum bend radius 2.25 in. Temperature rating -20 C to +60 C Standards ANSI X3T9.5 TP-PMD, ATM PMD 155 Mbps, IEEE802.12, 100Base-VG, IEEE802.3, 10 Base-T, 100 Base-T4, 100 Base-X, IEEE802.5, 4/16 Mbps Token Ring, Digital Video Attenuation (per 1000 ft) Near End Cross Talk (N.E.X.T.) per 1000 ft Freq (MHZ) Loss Freq (MHZ) db db db db db db db db db db db db
2 (CONT.) RG-6 Quad Shield Cable Type RG-6/U quad shield Type 75 ohm, non plenum coaxial cable Center Conductor 18 AWG solid bare copper Center Conductor O.D..040 in, nominal Dielectric Material 60 C Cellular Polyethylene Dielectric core O.D in., nominal Dielectric insulation 5 KV rms Foil Shields Coverage 100% coverage, 20% minimum overlap Number of Braid shields 2 Braid shield material Aluminum Number of foil shields 2 Foil shields material Aluminum foil tape Jacket material 60 C Polyinylchloride Jacket thickness in., nominal Overall O.D in., nominal Characteristic Impedance 75 ± 3 Ω Capacitance 17.3 pf/ft, nomial Velocity of propagation 78% nominal Conductor DC resistance 2.2 ohm / 100 ft Usage Video display, point of sale terminals, local area network controls, TV/CATV and cable modems Nominal attenuation per 100 ft.4 KHz MHz.7 10 MHz MHz MHz MHz MHz
3 FT1P / FT1P-J Multi-Media Cable APPLICATIONS The FT1P / FT1P-J multi-media consists of two (2) RG6 quad shield coax cables, two (2) CAT5e twisted pair cables and two (2) multi mode fiber optic cables. Installers can choose between speedwrapped or jacketed cable. The multi-media cable is used to distribute signals from the distribution panel to the rooms. FT1P Multi-Media Cable The FT1P / FT1P-J Multi-Media cable comes on a 500 reel. FT1P-J Multi-Media Cable CAT5e Twisted Pair Cable Type Four (4) unshielded 100 OHM extended distance/extended frequency twisted pair data cable Usage Voice, 100 Mbps LAN applications Conductor material 24 AWG solid bare copper Conductor O.D..020 in., nominal Insulation material Polyolefin Insulation conductor O.D in., nominal Color Code Pair One White Blue / Blue Pair Two White Orange / Orange Pair Three White Green / Green Pair Four White Brown / Brown Jacket material Polyvinyl chloride Jacket Colors Blue / Yellow Nominal jacket thickness.018 in. Nominal overall.200 in. O. D. Minimum bend radius 2.25 in. Temperature rating -20 C to +60 C Standards ANSI X3T9.5 TP-PMD, ATM PMD 155 Mbps, IEEE802.12, 100Base-VG, IEEE802.3, 10 Base-T, 100 Base-T4, 100 Base-X, IEEE802.5, 4/16 Mbps Token Ring, Digital Video Attenuation (per 1000 ft) Near End Cross Talk (N.E.X.T.) per 1000 ft Freq (MHZ) Loss Freq (MHZ) db db db db db db db db db db db db
4 (CONT.) RG-6 Quad Shield Cable Type RG-6/U quad shield Type 75 ohm, non plenum coaxial cable Center Conductor 18 AWG solid bare copper Center Conductor O.D..040 in, nominal Dielectric Material 60 C Cellular Polyethylene Dielectric core O.D in., nominal Dielectric insulation 5 KV rms Foil Shields Coverage 100% coverage, 20% minimum overlap Number of Braid shields 2 Braid shield material Aluminum Number of foil shields 2 Foil shields material Aluminum foil tape Jacket material 60 C Polyinylchloride Jacket thickness in., nominal Overall O.D in., nominal Characteristic Impedance 75 ± 3 Ω Capacitance 17.3 pf/ft, nomial Velocity of propagation 78% nominal Conductor DC resistance 2.2 ohm / 100 ft Usage Video display, point of sale terminals, local area network controls, TV/CATV and cable modems Nominal attenuation per 100 ft.4 KHz MHz.7 10 MHz MHz MHz MHz MHz Multi-Mode Fiber Optic Cable Type Diameter (core/cladding) Optical Type Optical material Operating Wavelength Buffer Diameter Storage temperature Operating temperature Max. tensile load for installation Max. tensile load, log term Min. bend radius for installation Min. bend radius, unloaded Crush resistance Impact resistance Flexing 850 nm 850 nm 1300 nm 1300 nm Single fiber cable, tight buffer, Kevlar strength member, flame retardant OFNR (riser) rated PVC outer jacket, NEC rated 62.5 / 125 microns Multi-Mode Glass 850 nm / 1300 nm 900 microns -40 to +70 C -20 to +70 C 1000 N (225 lbf) 500 N (112 lbf) 6.0 cm (2.4 in.) 3.0 cm (1.2 in.) 750 N/cm 1000 impacts 10,000 ± 90 occurrences <=3.5 db/km >= 160 MHz*km <= 1.0 db/km >= 500 MHz*km
5 FT2P Multi-Media (with CAT6 UTP Cable) APPLICATIONS The FT1P / FT1P-J multi-media consists of two (2) RG6 quad shield coax cables, two (2) CAT6 twisted pair cables and two (2) multi mode fiber optic cables. Installers can choose between speedwrapped or jacketed cable. The multi-media cable is used to distribute signals from the distribution panel to the rooms. The FT1P / FT1P-J Multi-Media cable comes on a 500 reel. FT2P Multi-Media Cable CAT6 Twisted Pair Cable Type Four (4) unshielded 100 OHM extended distance/extended frequency twisted pair data cable Usage Voice, 100 Mbps LAN applications Conductor material 23 AWG solid bare copper Conductor O.D..020 in., nominal Insulation material Polyolefin Insulation conductor O.D in., nominal Color Code Pair One White Blue / Blue Pair Two White Orange / Orange Pair Three White Green / Green Pair Four White Brown / Brown Jacket material Polyvinyl chloride Jacket Colors Blue / Yellow Nominal jacket thickness.022 in. Nominal overall.240 in. O. D. Minimum bend radius 2.25 in. Temperature rating -20 C to +60 C Standards ANSI X3T9.5 TP-PMD, ATM PMD 155 Mbps, IEEE802.12, 100Base-VG, IEEE802.3, 10 Base-T, 100 Base-T4, 100 Base-X, IEEE802.5, 4/16 Mbps Token Ring, Digital Video Attenuation (per 100 meters) Near End Cross Talk (N.E.X.T.) per 100 meters Freq (MHZ) Loss Freq (MHZ) db db db db db db db db db db db db db db db
6 (CONT.) RG-6 Quad Shield Cable Type RG-6/U quad shield Type 75 ohm, non plenum coaxial cable Center Conductor 18 AWG solid bare copper Center Conductor O.D..040 in, nominal Dielectric Material 60 C Cellular Polyethylene Dielectric core O.D in., nominal Dielectric insulation 5 KV rms Foil Shields Coverage 100% coverage, 20% minimum overlap Number of Braid shields 2 Braid shield material Aluminum Number of foil shields 2 Foil shields material Aluminum foil tape Jacket material 60 C Polyinylchloride Jacket thickness in., nominal Overall O.D in., nominal Characteristic Impedance 75 ± 3 Ω Capacitance 17.3 pf/ft, nomial Velocity of propagation 78% nominal Conductor DC resistance 2.2 ohm / 100 ft Usage Video display, point of sale terminals, local area network controls, TV/CATV and cable modems Nominal attenuation per 100 ft.4 KHz MHz.7 10 MHz MHz MHz MHz MHz Multi-Mode Fiber Optic Cable Type Diameter (core/cladding) Optical Type Optical material Operating Wavelength Buffer Diameter Storage temperature Operating temperature Max. tensile load for installation Max. tensile load, log term Min. bend radius for installation Min. bend radius, unloaded Crush resistance Impact resistance Flexing 850 nm 850 nm 1300 nm 1300 nm Single fiber cable, tight buffer, Kevlar strength member, flame retardant OFNR (riser) rated PVC outer jacket, NEC rated 62.5 / 125 microns Multi-Mode Glass 850 nm / 1300 nm 900 microns -40 to +70 C -20 to +70 C 1000 N (225 lbf) 500 N (112 lbf) 6.0 cm (2.4 in.) 3.0 cm (1.2 in.) 750 N/cm 1000 impacts 10,000 ± 90 occurrences <=3.5 db/km >= 160 MHz*km <= 1.0 db/km >= 500 MHz*km
7 CBL-TP100 CAT5e Twisted Pair Cable CAT5e Twisted Pair Cable Type Four (4) unshielded 100 OHM extended distance/extended frequency twisted pair data cable Usage Voice, 100 Mbps LAN applications Conductor material 24 AWG solid bare copper Conductor O.D..020 in., nominal Insulation material Polyolefin Insulation conductor O.D in., nominal Color Code Pair One White Blue / Blue Pair Two White Orange / Orange Pair Three White Green / Green Pair Four White Brown / Brown Jacket material Polyvinyl chloride Jacket Colors Blue / Yellow Nominal jacket thickness.018 in. Nominal overall.200 in. O. D. Minimum bend radius 2.25 in. Temperature rating -20 C to +60 C Standards ANSI X3T9.5 TP-PMD, ATM PMD 155 Mbps, IEEE802.12, 100Base-VG, IEEE802.3, 10 Base-T, 100 Base-T4, 100 Base-X, IEEE802.5, 4/16 Mbps Token Ring, Digital Video Attenuation (per 1000 ft) Near End Cross Talk (N.E.X.T.) per 1000 ft Freq (MHZ) Loss Freq (MHZ) db db db db db db db db db db db db
8 CBL-CX100 RG6 Quad Shield Coax Cable (CONT.) RG-6 Quad Shield Cable Type RG-6/U quad shield Type 75 ohm, non plenum coaxial cable Center Conductor 18 AWG solid bare copper Center Conductor O.D..040 in, nominal Dielectric Material 60 C Cellular Polyethylene Dielectric core O.D in., nominal Dielectric insulation 5 KV rms Foil Shields Coverage 100% coverage, 20% minimum overlap Number of Braid shields 2 Braid shield material Aluminum Number of foil shields 2 Foil shields material Aluminum foil tape Jacket material 60 C Polyinylchloride Jacket thickness in., nominal Overall O.D in., nominal Characteristic Impedance 75 ± 3 Ω Capacitance 17.3 pf/ft, nomial Velocity of propagation 78% nominal Conductor DC resistance 2.2 ohm / 100 ft Usage Video display, point of sale terminals, local area network controls, TV/CATV and cable modems Nominal attenuation per 100 ft.4 KHz MHz.7 10 MHz MHz MHz MHz MHz
9 20 db Bi-directional Video Amplifier FutureSmart was one of the first structured wiring manufacturers to understand the importance of a bidirectional amplifier in a structured wiring system. With new services such as digital Cable TV, digital telephone and high-speed cable modems, a bi-directional structured wiring system is a must. FutureSmart has worked with video amplifier manufacturers to design and build a high quality video amplifier that compliments today s services. The following Coax Distribution Hubs and Modules use this high quality video amplifier: QuickNetwork Series MDC-408 MDC-412 MDC-416 Pro and SuperPro Series HBC-408 HBC-412 HBC-416 Bandwidth 1 Gigahertz Forward Path MHz Forward Gain 20 ± 1.0dB Reverse Path 5-42 MHz Reverse Loss 12dB min/14db Type. Flatness ± 1dB Noise Figure 7dB max Distortion@30dB X-mod: -60dB / CTB: -60dB mv Insertion Loss 5-40MHz 42MHz Maximum Output 30dBmv/Ch. Signal Max. Channels 151
10 Telephone and Coax Surge Suppression With the number of power surges and power spikes that occur on a daily basis, no home should be without surge suppression. FutureSmart offers several Telephone and Coax Distribution Hubs and Modules that include surge suppression. FutureSmart s Telephone Distribution Hubs and Modules have field changeable surge suppression, which dramatically reduces down time. The following Telephone and Coax Distribution Hubs and Modules include surge suppression: Telephone Distribution QuickNetwork Series MDT-122P MDT-124P Pro and SuperPro Series HBT-122P HBT-124P Coax Distribution QuickNetwork Series MDC-408 MDC-412 MDC-416 Pro and SuperPro Series HBC-408 HBC-412 HBC-416 COAX DISTRIBUTION SURGE PROTECTION Max line voltage 24Vpk Circuit type (number of 1 stages) Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss(10mhz-1.5ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V TELEPHONE SURGE PROTECTION Max line voltage 280V Circuit type (number of 1 stages) Response time >1 ps Max surge amperage 200A Protection modes TG,RG UL Rating UL 497A Category A Ringwave (L-N) 300V 200Amps
11 Multi-Media Wall Outlets One of the key components of a Home Network System is the Multi-Media Wall Outlets. These wall outlets serve as access points for each zone to connect with the Home Network Panel. FutureSmart offers a single gang wall outlet with 1, 2, 3, 4 or 6 ports. The wall outlet shown below is a 6 port. These jacks can be configured to fit the end-users needs. The Multi-Media Wall Outlet provides access to electronic information where it is needed. Having access to RG6, CAT5e and optional fiber optic outlets in each room allows easy modification or upgrades without drastically changing the network structure. Anywhere there is a Multi-Media wall outlet; there is access to the telephone, computer network, fax, modem, and audio/video. The user has television reception of all available channels, including modulated channels like CCTV and SATV. Each Multi-Media wall outlet is connected to the distribution panel through the SpeedWrap Cable. The cabling is routed through the walls of the home or office structure connecting each wall outlet with the distribution panel. Part No. REC-106W 6 Port Wall Outlet 4 Port Wall Outlet 3 Port Wall Outlet 2 Port Wall Outlet Colors White,Ivory, Almond White, Ivory, Almond White, Ivory, Almond White, Ivory, Almond Dimensions 4.5 H X 2.75 W 4.5 H X 2.75 W 4.5 H X 2.75 W 4.5 H X 2.75 W Mounting Single Gang J box or Mud ring Single Gang J box or Mud ring Single Gang J box or Mud ring Single Gang J box or Mud ring CAT5e Connections Coax Connections Expansion Blanks Port Telephone Outlet 1 Port Data Outlet 1 Port Coax Outlet Colors White, Ivory, Almond White, Ivory, Almond White, Ivory, Almond Dimensions 4.5 H X 2.75 W 4.5 H X 2.75 W 4.5 H X 2.75 W Mounting Single Gang J box or Mud ring Single Gang J box or Mud ring CAT3 (2 pair) Connections CAT5e Connections Coax Connections Expansion Blanks Single Gang J box or Mud ring
12 AN-100 Basic Distribution Panel The AN-100 Basic Distribution Panel provides the perfect structured wiring solution for apartments, condos or even single family homes. This economical panel provides distribution of voice and video signals through out the home and includes: A triple gang install ring and cover Distribution of 1 incoming video signal to 4 locations Distribution of 4 incoming telephone lines to 6 locations (CAT5e rated). Part No. AN-100 The AN-100 was designed for installations where space is a premiuim. This stream line distribution panel effectively distributes both voice and video signals and takes up no more than a 6.5 inch by 5 inch space on your wall. The AN-100 is also the perfect entry level product for cost sensitive customers. APPLICATIONS In its basic configuration, the AN-100 Distribution Panel provides distribution and control of voice and video signals. The AN-100 can be either flush or surface mounted and includes a stylish cover. Dimensions Install ring 5.5 W X 4 H (13.97cm W x 10.16cm H) Cover 6.5 W X 4.75 H (16.51cm W X 12.06cm H) 1.2 lbs. (.54 kg) Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 6 locations (110 punch down) Distribution Coax Distribution 1 in, 4 out, Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The triple gang installation ring mounts to a stud or can be surface mounted
13 QND-200 Distribution Panel The QND-200 Distribution Panel provides the perfect structured wiring solution for apartments, condos or even single family homes. This economical panel provides distribution of voice and video signals through out the home and includes: Install can and cover Distribution of 1 incoming video signal to 4 locations 2 pass through connectors for Satellite TV distribution Distribution of 4 incoming telephone lines to 8 locations (RJ45). RJ31x port The QND-200 was designed for installations where space is a premiuim. This stream line distribution panel effectively distributes both voice and video signals. The QND-200 is also the perfect entry level product for cost sensitive customers. APPLICATIONS In its basic configuration, the QND-200 Distribution Panel provides distribution and control of voice and video signals. The QND-200 can be either flush or surface mounted and includes a stylish cover. Dimensions H 6.5 x W 14.5 x D lbs. Operating 32 to 113 F (0-50 C) Temperature Telephone Distribution Coax Distribution Supported Cable Installation 4 lines to 8 locations (RJ45), with RJ31x port 1 in, 4 out, 2 pass through connections for satellite TV. CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Flush mount or surface mount
14 QND-300 Distribution Panel The QND-300 Distribution Panel provides the perfect structured wiring solution for apartments, condos or even single family homes. This economical panel provides distribution of voice and video signals through out the home and includes: Install can and cover Distribution of 1 incoming video signal to 8 locations Built-in 12dB bi-directional amplifier 2 pass through connectors for Satellite TV distribution Distribution of 4 incoming telephone lines to 8 locations (RJ45). RJ31x port The QND-300 was designed for installations where space is a premiuim. This stream line distribution panel effectively distributes both voice and video signals. The QND-300 is also the perfect entry level product for cost sensitive customers. APPLICATIONS In its basic configuration, the QND-300 Distribution Panel provides distribution and control of voice and video signals. The QND-300 can be either flush or surface mounted and includes a stylish cover. Dimensions H 6.5 x W 14.5 x D lbs. Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (JR45), with RJ31x port Distribution Coax Distribution 1 in, 8 out, 2 pass through connections for satellite TV. Amplification 12dB, bi-directional amplifier (5-42 MHz reverse path, 45 to 1000 MHz forward path) Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation Flush mount or surface mount
15 QND-4800 QuickNetwork Distribution Panel The QuickNetwork QND-4800 Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND-4800 comes standard with: A 18 flush-mount install can and cover A combined telephone and coax Distribution Module (part # MDX-48300) 110V power outlet RJ31x port The QND-4800 is the perfect entry level distribution panel. While providing distribution of voice, data and video signals, the QND-4800 also accepts a wide variety of upgrade modules, allowing customers to customize this panel to their exact needs. With the QND-4800 panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. APPLICATIONS Part No. QND-4800 In its basic configuration, the QND-4800 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional modules, the QND-4800 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 18 H x 4 D (36.8 cm W x 45.7 cm H x 10.2 cm D) 8.0 lbs. (3.6 kg) Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (110 punch down), with RJ31x port Distribution Coax Distribution 1 in, 4 out, 2 SATV Expansion Four expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
16 QND-48P QuickNetwork Distribution System The QuickNetwork QND-48P Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND-48P comes standard with: A 18 flush-mount install can and cover A combined telephone and coax Distribution Module (part # MDC4-T8RJ) 110V power outlet RJ31x port The QND-48P is the perfect entry level distribution panel. While providing distribution of voice, data and video signals, the QND-48P also accepts a wide variety of upgrade modules, allowing customers to customize this panel to their exact needs. Another added benefit of the QND-48P is the RJ45 connectors on the Distribution Module. The RJ45 connectors make it easy for customers to make changes to their Home Network. With the QND-48P panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. Part No. QND-48P APPLICATIONS In its basic configuration, the QND-48P Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional modules, the QND-48P can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 18 H x 4 D (36.8 cm W x 45.7 cm H x 10.2 cm D) 8.0 lbs. (3.6 kg) Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (RJ45),RJ31x port Distribution Coax Distribution 1 in, 4 out, 2 SATV Expansion Four expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
17 QND-8800 QuickNetwork Distribution Panel The QuickNetwork QND-8800 Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND-8800 comes standard with: A 18 flush-mount install can and cover A combined telephone and coax Distribution Module (part # MDX-88300) 110V power outlet The QND-8800 is the perfect entry level distribution panel. While providing distribution of voice, data and video signals, the QND-8800 also accepts a wide variety of upgrade modules, allowing customers to customize this panel to their exact needs. With the QND-8800 panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. APPLICATIONS Part No. QND-8800 In its basic configuration, the QND-8800 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional modules, the QND-8800 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 18 H x 4 D (36.8 cm W x 45.7 cm H x 10.2 cm D) 8.0 lbs. (3.6 kg) Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (110 punch down), with RJ31x Distribution Coax Distribution 1 in, 8 out, 2 SATV Expansion Four expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
18 QND-88P QuickNetwork Distribution Panel The QuickNetwork QND-88P Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND-88P comes standard with: A 18 flush-mount install can and cover A combined telephone and coax Distribution Module (part # MDC8-T8RJ) 110V power outlet RJ31x port The QND-88P is the perfect entry level distribution panel. While providing distribution of voice, data and video signals, the QND-88P also accepts a wide variety of upgrade modules, allowing customers to customize this panel to their exact needs. Another added benefit of the QND-88P is the RJ45 connectors on the Distribution Module. The RJ45 connectors make it easy for customers to make changes to their Home Network. With the QND-88P panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. Part No. QND-88P APPLICATIONS In its basic configuration, the QND-88P Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional modules, the QND-88P can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 18 H x 4 D (36.8 cm W x 45.7 cm H x 10.2 cm D) 8.0 lbs. (3.6 kg) Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (RJ45), with RJ31x port Distribution Coax Distribution 1 in, 8 out, 2 SATV Expansion Four expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
19 QND QuickNetwork Distribution Panel The QuickNetwork QND Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND comes standard with: Install can and cover Distribution of 1 incoming video signal to 8 locations Built-in 12dB bi-directional amplifier 2 pass through connectors for Satellite TV distribution Distribution of 4 incoming telephone lines to 8 locations (RJ45). RJ31x port The QND is the perfect entry level distribution panel. While providing distribution of voice, data and amplified video signals, the QND also accepts a wide variety of upgrade Part No. QND modules, allowing customers to customize this panel to their exact needs. Another added benefit of the QND is the RJ45 connectors on the Distribution Module. The RJ45 connectors make it easy for customers to make changes to their Home Network. With the QND panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. APPLICATIONS In its basic configuration, the QND Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional modules, the QND can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions H 6.5 x W 14.5 x D lbs. Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (JR45), with RJ31x port Distribution Coax Distribution 1 in, 8 out, 2 pass through connections for satellite TV. Amplification 12dB, bi-directional amplifier (5-42 MHz reverse path, 45 to 1000 MHz forward path) Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation Flush mount or surface mount
20 QND QuickNetwork Distribution Panel The QuickNetwork QND Distribution Panel is one of the most economical FutureSmart Distribution Panels. Providing distribution of voice, data and video; the QND comes standard with: Install can and cover Distribution of 1 incoming video signal to 8 locations Built-in 12dB bi-directional amplifier 2 pass through connectors for Satellite TV distribution Distribution of 4 incoming telephone lines to 8 locations (110 punch down) RJ31x port The QND is the perfect entry level distribution panel. While providing distribution of voice, data and amplified video signals, the QND also accepts a wide variety of upgrade modules, allowing customers to customize this panel to their exact needs. With the QND panel, installers and builders have an easy to use, flexible, and inexpensive solution for wire management and signal distribution. Part No. QND APPLICATIONS In its basic configuration, the QND Distribution Panel provides distribution and control of voice, data and amplifies video signals. With the addition of optional modules, the QND can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions H 6.5 x W 14.5 x D lbs. Operating 32 to 113 F (0-50 C) Temperature Telephone 4 lines to 8 locations (110 punch down), with RJ31x port Distribution Coax Distribution 1 in, 8 out, 2 pass through connections for satellite TV. Amplification 12dB, bi-directional amplifier (5-42 MHz reverse path, 45 to 1000 MHz forward path) Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation Flush mount or surface mount
21 QNP-6X QuickNetwork Distribution Panel The QNP-6X Distribution Panel gives customers a higher level of flexibility and control. Providing distribution of voice, data and video; the QNP-6X comes standard with: A 36 flush-mount install can and cover Two, 3 zone patch modules (part # MDP-3) A telephone Distribution Module (part # MDT-124P) An amplified coax Distribution Module (part # MDC- 408) 110V power outlet RJ31x port The design of the QNP-6X makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. Additionally, when new services or products become available, the expansion bays easily accept upgrades, allowing users to customize the system to fit their exact needs. Part No. QNP-6X APPLICATIONS In its basic configuration, the QNP-6X Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional controllers, the QNP-6X can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 36 H x 4 D (36.8 cm W x 91.4 cm H x 10.2 cm D) 18 lbs. Operating 32 to 113 F (0-50 C) Temperature Number of Zones 6 zones (each zone populated with 2 CAT5e inserts and 2 RG6 inserts) Patch Cords 6 telephone patch cords (4 line, CAT5e), 6 RG-6 mini digital coax patch cords Telephone Distribution 4 lines to 11 locations (12 locations with KSU). Built-in Amphenol connector for interface with KSU, RJ31X for security and surge suppression Coax Distribution 5 in, 8 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.), with 4 pass-throughs for SATV and CCTV Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Five expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
22 QNP-12X QuickNetwork Distribution Panel The QNP-12X Distribution Panel gives customers a higher level of flexibility and control. Providing distribution of voice, data and video; the QNP-12X comes standard with: A 36 flush-mount install can and cover Four, 3 zone patch modules (part # MDP-3) A telephone Distribution Module (part # MDT-124P) An amplified coax Distribution Module (part # MDC-412) 110V power outlet RJ31x port The design of the QNP-12X makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. Additionally, when new services or products become available, the expansion bays easily accept upgrades, allowing users to customize the system to fit their exact needs. APPLICATIONS Part No. QNP-12X In its basic configuration, the QNP-12X Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional controllers, the QNP-12X can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 36 H x 4 D (36.8 cm W x 91.4 cm H x 10.2 cm D) 18 lbs. Operating 32 to 113 F (0-50 C) Temperature Number of Zones 12 zones (each zone populated with 2 CAT5e inserts and 2 RG6 inserts) Patch Cords 12 telephone patch cords (4 line, CAT5e), 12 RG-6 mini digital coax patch cords Telephone Distribution 4 lines to 11 locations (12 locations with KSU). Built-in Amphenol connector for interface with KSU, RJ31X for security and surge suppression Coax Distribution 5 in, 12 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.), with 4 pass-throughs for SATV and CCTV Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Three expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
23 QNP-18X QuickNetwork Distribution Panel The QNP-18X Distribution Panel gives customers a higher level of flexibility and control. Providing distribution of voice, data and video; the QNP-18X comes standard with: A 48 flush-mount install can and cover Six, 3 zone patch modules (part # MDP-3) A telephone Distribution Module (part # MDT-124P) An amplified coax Distribution Module (part # MDC-416) 110V power outlet The design of the QNP-18X makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. Additionally, when new services or products become available, the expansion bays easily accept upgrades, allowing users to customize the system to fit their exact needs. APPLICATIONS Part No. QNP-18X In its basic configuration, the QNP-18X Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional controllers, the QNP-18X can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 14.5 W x 48 H x 4 D (36.8 cm W x cm H x 10.2 cm D) 18 lbs. Operating 32 to 113 F (0-50 C) Temperature Number of Zones 18 zones (each zone populated with 2 CAT5e inserts and 2 RG6 inserts) Patch Cords 18 telephone patch cords (4 line, CAT5e), 18 RG-6 mini digital coax patch cords Telephone Distribution 4 lines to 11 locations (12 locations with KSU). Built-in Amphenol connector for interface with KSU, RJ31X for security and surge suppression Coax Distribution 5 in, 16 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.), with 4 pass-throughs for SATV and CCTV Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Five expansion bays Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel flush mounts between 16 OC studs
24 SP08 / SP08-R SuperPro Distribution Panel The SuperPro 8 Distribution Panel provides user-friendly distribution of voice, data and video signals throughout the home or office. The SP08 comes standard with: A wall mount housing A patented 8 zone patching area (see specifications table below for zone population) 4 telephone patch cords (4 pair) 4 coax patch cords A telephone distribution hub (part # HBT-124P) An amplified coax distribution hub (part # HBC-408) A service input hub (part # HBSI) And 3 expansion slots for adding additional hubs RJ31x port R version mounts over a 24 rough-in can Part No. SP08 The design of the SuperPro 8 Distribution Panel makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. And when new services or products become available, the expansion slots can be quickly removed and replaced with the upgrades. APPLICATIONS In its basic configuration, the SP08 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional hubs, the SP08 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products.. Dimensions 17.5 W x 26.3/4 H x 6 D (SP08) x 2.5 D (SP08R) 24 lbs. (10.9 kg) Operating Temp C (32 to 113 F) Number of Zones 8 zones (4 zones populated with 2 CAT5e inserts, 2 RG6 inserts and 2 blanks; 4 zones populated with 6 blanks per zone) Patch Cords 4 telephone patch cords (4 line, CAT5e), 4 RG6 mini digital coax patch cords Telephone 4 lines in to 11 locations (12 locations with KSU). Built-in Amphenol connector for Distribution interface with KSU, RJ31 X for security and surge suppression Coax Distribution 5 in, 8 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.) Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion 4 expansion slots Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel surface mounts to the wall or mounts over the top of a 24 QuickNetwork Series Install Can (part # QNIC-24) The SP08-R has the same features and specifications as the SP08, except it comes with a 2.5 deep housing instead of a 6 deep housing.
25 SP16 / SP16-R SuperPro Distribution Panel The SuperPro 16 Distribution Panel provides user-friendly distribution of voice, data and video signals throughout the home or office. The SP16 comes standard with: A wall mount housing A patented 16 zone patching area (see specifications table below for zone population) 8 telephone patch cords (4 pair) 8 coax patch cords A telephone distribution hub (part # HBT-124P) An amplified coax distribution hub (part # HBC-416) A service input hub (part # HBSI) And 7 expansion slots for adding additional hubs RJ31x port R version mounts over a 26 rough-in can Part No. SP16 The design of the SuperPro 16 Distribution Panel makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. And when new services or products become available, the expansion slots can be quickly removed and replaced with the upgrades. APPLICATIONS In its basic configuration, the SP16 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional hubs, the SP16 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. Dimensions 17 5/8 W x 39 H x 6 D (SP16) x 2.5 (SP16R) 28 lbs. (12.7 kg) Operating Temp. 32 to 113 F (0-50 C) Number of Zones 16 zones (8 zones populated with 2 CAT5e inserts, 2 RG6 inserts and 2 blanks; 8 zones populated with 6 blanks per zone) Patch Cords 8 telephone patch cords (4 line, CAT5e), 8 RG6 mini digital coax patch cords Telephone 4 lines in to 11 locations (12 locations with KSU). Built-in Amphenol connector for Distribution interface with KSU, RJ31X for security and surge suppression Coax Distribution 5 in, 16 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.) Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Slots 7 expansion slots Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel surface mounts to the wall or mounts over the top of a 36 QuickNetwork Series Install Can (part # QNIC-36) The SP16-R has the same features and specifications as the SP16, except it comes with a 2.5 deep housing instead of a 6 deep housing.
26 SP24 SuperPro Distribution Panel The SuperPro 24 Distribution Panel provides user-friendly distribution of voice, data and video signals throughout the home or office. The SP24 comes standard with: A wall mount housing A patented 24 zone patching area (see specifications table below for zone population) 12 telephone patch cords (4 pair) 12 coax patch cords A telephone distribution hub (part # HBT-124P) An amplified coax distribution hub (part # HBC-416) A service input hub (part # HBSI) And 10 expansion slots for adding additional hubs RJ31x port Mounts over a 48 rough-in can (optional) The design of the SuperPro 24 Distribution Panel makes management and Part No. SP24 control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. And when new services or products become available, the expansion slots can be quickly removed and replaced with the upgrades. APPLICATIONS In its basic configuration, the SP24 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional hubs, the SP24 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. It s recommended that the 48 rough in can be used for extra depth. Dimensions 17 9/16 W x 50 7/8 H x 6 D 31 lbs. Operating Temp. 32 to 113 F (0-50 C) Number of Zones 24 zones (12 zones populated with 2 CAT5e inserts, 2 RG6 inserts and 2 blanks; 12 zones populated with 6 blanks per zone) Patch Cords 12 telephone patch cords (4 line, CAT5e), 12 RG6 mini digital coax patch cords Telephone 4 lines in to 11 locations (12 locations with KSU). Built-in Amphenol connector for Distribution interface with KSU and surge suppression Coax Distribution 5 in, 16 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.) Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Slots 10 expansion slots Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel surface mounts to the wall or mounts over the top of a 48 QuickNetwork Series Install Can (part # QNIC-48)
27 SP32 SuperPro Distribution Panel The SuperPro 32 Distribution Panel provides user-friendly distribution of voice, data and video signals throughout the home or office. The SP32 comes standard with: A wall mount housing A patented 32 zone patching area (see specifications table below for zone population) 16 telephone patch cords (4 pair) 16 coax patch cords A telephone distribution hub (part # HBT-124P) An amplified coax distribution hub (part # HBC-416) A service input hub (part # HBSI) And 8 expansion slots for adding additional hubs RJ31x port Mounts over a 48 rough-in can (optional) Part No. SP32 The design of the SuperPro 32 Distribution Panel makes management and control of signals and services very simple. By utilizing the patch cords and the patented patching area, users can control which rooms receive desired signals. And when new services or products become available, the expansion slots can be quickly removed and replaced with the upgrades. APPLICATIONS In its basic configuration, the SP32 Distribution Panel provides distribution and control of voice, data and video signals. With the addition of optional hubs, the SP32 can also provide distribution and control of security, audio, computer networks, home automation, X10 products, IR products, RF products and wireless products. It s recommended that the 48 rough in can be used for extra depth. Dimensions 17 9/16 W x 50 7/8 H x 6 D 35 lbs. Operating Temp. 32 to 113 F (0-50 C) Number of Zones 32 zones (16 zones populated with 2 CAT5e inserts, 2 RG6 inserts and 2 blanks; 16 zones populated with 6 blanks per zone) Patch Cords 16 telephone patch cords (4 line, CAT5e), 16 RG6 mini digital coax patch cords Telephone 4 lines in to 11 locations (12 locations with KSU). Built-in Amphenol connector for Distribution interface with KSU, RJ31X for security and surge suppression Coax Distribution 5 in, 16 out, (1 input for TV/CATV and 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc.) Amplification 20 db bi-directional video amplifier. IR and DC passing Surge Protection Incoming Coax and Telephone lines are surge protected Expansion Slots 8 expansion slots Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 or RG6 coax cable Installation The panel surface mounts to the wall or mounts over the top of a 48 QuickNetwork Series Install Can (part # QNIC-48)
28 HBC-408B Coax Distribution Hub The HBC-408B Coax Distribution Hub is a high quality video distribution hub designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The HBC-408B includes a 12V DC power transformer and red LED light to comfrim power. Part No. HBC-408B APPLICATION The HBC-408 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The HBC-408B will pass both IR and DC signals, making it a perfect video distribution hub for whole house audio/video control. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the HBC-408B has been balanced to avoid signal strength problems. The eight outputs carry all signals to the desired locations. Hub Size Double Height (takes up 2 expansion slots) 4 lbs. (1.8 kg) Power Supply 12V DC Current Draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 surge protected TV/CATV input; 4 surge protected inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. Outputs 8 COAX SURGE SUPPRESSION Max line voltage 24Vpk Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss (10MHz-1.5Ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V
29 HBC-412B Coax Distribution Hub The HBC-412B Coax Distribution Hub is a high quality video distribution hub designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The HBC-412B includes a 12V DC power transformer and red LED light to comfrim power. Part No. HBC-412B APPLICATION The HBC-412B distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the HBC-412B has been balanced to avoid signal strength problems. The twelve outputs carry all signals to the desired locations. Hub Size Double Height (takes up 2 expansion slots) 4 lbs. (1.8 kg) Power Supply 12V DC Current Draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 surge protected TV/CATV input; 4 surge protected inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. Outputs 12 COAX SURGE SUPPRESSION Max line voltage 24Vpk Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss (10MHz-1.5Ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V
30 HBC-416B Coax Distribution Hub The HBC-416B Coax Distribution Hub is a high quality video distribution hub designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The HBC-416B includes a 12V DC power transformer and red LED light to comfrim power.. Part No. HBC-416 APPLICATION The HBC-416B distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the HBC-416B has been balanced to avoid signal strength problems. The sixteen outputs carry all signals to the desired locations. Hub Size Double Height (takes up 2 expansion slots) 4 lbs. (1.8 kg) Power Supply 12V DC Current Draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 surge protected TV/CATV input; 4 surge protected inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. Outputs 16 COAX SURGE SUPPRESSION Max line voltage 24Vpk Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss (10MHz-1.5Ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V
31 HBT-122P 2 Line Telephone Distribution Hub The HBT-122P Telephone Distribution Hub is a versatile, full featured telephone distribution hub designed to provide user friendly management and control of telephone and data signals throughout the home or office. With built-in surge suppression, your phones and modems will be protected against bothersome powers surges and spikes. A built-in Amphenol connection makes upgrading to digital telephones systems a snap (KSU or PBX). Part No. HBT-122P APPLICATION The HBT-122P distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. Hub Size Input Output Standard Wire KSU/PBX Interface Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) 2 Pairs (2 lines) 11 locations (12 locations when used with a KSU) USOC CAT3, CAT5 or CAT5e UTP 1 25-pair Amphenol / Telco connector TELEPHONE SURGE SUPPRESSION Max line voltage 280V Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 200A Protection modes TG, RG UL Rating UL 497A Category A Ringwave (L-N) 200Amps 300V
32 HBT-124P 4 Line Telephone Distribution Hub The HBT-124P Telephone Distribution Hub is a versatile, full featured telephone distribution hub designed to provide user friendly management and control of telephone and data signals throughout the home or office. With built-in surge suppression, your phones and modems will be protected against bothersome powers surges and spikes. A built-in Amphenol connection makes upgrading to digital telephones systems a snap (KSU or PBX), and also an RJ31x port for a Secrurity system. Part No. HBT-124P APPLICATION The HBT-124P distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. Hub Size Input Output Standard Wire KSU/PBX Interface Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) 4 Pairs (4 lines) 11 locations (12 locations when used with a KSU), and RJ31x port USOC CAT3, CAT5 or CAT5e UTP 2 25-pair Amphenol / Telco connectors TELEPHONE SURGE SUPPRESSION Max line voltage 280V Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 200A Protection modes TG, RG UL Rating UL 497A Category A Ringwave (L-N) 200Amps 300V
33 HBT-083P KSU/PBX Telephone System Distribution Hub The HBT-083P Telephone Distribution Hub is a versatile, full featured telephone distribution hub designed specifically for use with three line KSU or PBX telephone systems. With true plug and play capability, the HBT-083P makes assigning or changing extensions in the home or office a breeze. The HBT-083P supports most brands of KSU or PBX systems and Part No. HBT-083P enables features such as intercom, paging, extension to extension call transfer, music on hold and many other features commonly found on a KSU or PBX. APPLICATION The HBT-083P does not work with standard (POTS) telephones. The HBT-083P connects to a KSU or PBX phone card via a Hydra Cable (this eliminates the needs for time consuming termination to a 66 or 110 style punch down block). The 8 ports on the front of the HBT-083P represent the 8 exstensions provided by the KSU or PBX. Hub Size Input Output Standard Wire KSU/PBX Interface Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) 3 Pairs (3 lines) 8 locations USOC CAT3, CAT5 or CAT5e UTP 1 25-pair Amphenol / Telco connector
34 HBDS-4 Satellite TV Distribution Hub The HBDS-4 Satellite TV Distribution Hub provides distribution of Satellite TV signals from one dual LNB satellite dish to up to 4 Satellite TV Receivers and televisions. Each of the 4 Satellite TV receivers will work independently of each other, allowing customers to watch 4 different Satellite TV channels from one Satellite TV dish. Part No. HBDS-4 APPLICATION The HBDS-4 has a built-in diplexer, which will combine both Satellite TV and TV/Cable TV signals, then send them to each room through a single coax line. Installers should provide a diplexer at the room location to separate the TV/CATV signal from the Satellite TV signal; or use a Satellite dish receiver with a built in diplexer. Not recommended for HDTV satellite or for Dish 500 systems with a sw1 switch Hub Size Single Height (takes up one expansion slot) 2.5 lbs (1.1 kg) Frequency Range MHz Current 70 ma Consumption Potential Tolerance 14/18 Volts ± 1.5 Volts Impedance 75Ω - F Connector Isolation Loss 20dB Minimum Insertion Loss -4dB Output Level 100dB uv Inputs 2 LNB, 1 TV/CATV (built-in diplexer) Outputs 4 Mounting The Hub mounts in either a SuperPro. Capacity The Hub services up to four (4) DBS receiver locations, using a dual LNB DBS dish
35 HBDS-8202 Satellite TV Distribution Hub The HBDS-8202 Satellite TV Distribution Hub provides distribution of Multi Satellite System (HDTV) signals from one; multi LNB satellite dish to up to 8 Satellite Receivers. Each of the 8 Satellite receivers will work independently of each other, allowing customers to watch 8 different Satellite TV channels from one Satellite dish. Part No. HBDS-8202 Not recommended for Dish Network (Dish 500 systems). Hub Size Single Height (takes up one expansion slot) 2.5 lbs (1.1 kg) Frequency Range MHz Current 60mA Consumption Potential Tolerance 14/18 Volts ± 1.5 Volts Impedance 75Ω - F Connector Isolation Loss 20dB Minimum Insertion Loss -3dB (54-806MHz) 2dB ( ) Output Level 100dB uv Inputs 4 LNB Outputs 8 Mounting The Hub mounts in either a SuperPro panel
36 HBMD Triple Channel Modulator Hub The Triple Channel Modulator Hub is used for creating in-home television channels that can be viewed from any TV in the house. Signals from three different audio /video sources such as TVs, VCRs, DSS or Satellite TV, laser disc players and security cameras can be identified and displayed by any TV. Part No. HBMD APPLICATION The HBMD is a mono modulator, which will accept inputs from three different video sources. All three signals are combined to a signal output. Unlike analog modulators, the HBMD is digital and will not wander. Hub Size Mounting Capacity Output Frequency Range Modulation Method Output Level Video Output Connector Video Input Connectors Audio Input Connectors Power Requirement Single Height (takes up on expansion slot) 1.5 lbs (0.7 kg) The hub mounts in a SuperPro. 3 Separate Audio/Video Inputs Ch UHF, Ch CATV, Ch CATV Digital, Crystal Stabilized PLL +25 dbmv 1- F Style 3- RCA, 75 Ohm, 1Vp-p 3-3.5mm Stereo Jacks 75,000 Ohm, 1 Vp-p 12V DC, 300mA CL2, UL Approved, Indoor use only
37 HBFDS / HBFDS-R Front Door Station Hub This hub allows home or building occupants to speak to visitors at the front door or entry using existing telephones and a door / entry station. The Front Door Station Hub does not interfere with telephone company services such as Call Waiting and Caller ID. The hub has an upgrade option (HBFDS-R) permitting home or building occupants to release door locks via the telephone, allowing visitors to enter. APPLICATIONS Part No. HBFDS Part No HBFDS-R (with lock release) The HBFDS comes with one door station and can accept one additional door station. Hub Size Mounting Power Supply Current draw Recommended Line Interface Wire Speaker Relay Contacts (HBV2 only) Single Height (takes up one expansion slot) 2.0 lbs (0.9 kg) The hub mounts in a SuperPro. 12V DC 25ma stand by, 125ma max RJ31X (on 12/4 TP Hub) 22-28Awg twisted pair, CAT5 recommended 8 Ohm, 25 watt, is weatherproof
38 FDS-100 Front Door Station The FDS-100 Front Door Station is a two-way speaker, which is used for communicating with visitors. The FDS-100 can be installed in a variety of locations, including the front or rear door, gated entry way, pool area, etc, the speaker is weatherproof APPLICATION One FDS-100 comes with the HBFDS Front Door Station Hub or MDFDS Front Door Station Module. A second FDS-100 can be added to either the hub or module. Dimensions Wire Speaker 3 7/8 W x 5 1/8 H x 1 1/8 D 22-28Awg twisted pair, CAT5 recommended 8 Ohm, 25 watt. is weatherproof
39 HBEN-108 Ethernet Switch Hub This 8 port, 10/100BaseTX Ethernet Hub creates a local area network by connecting up to eight computers, printers or network devices and is capable of true 100 Mbps transmission HBEN-108 speeds. Sharing printers over the network will cut the expense of purchasing a printer for each computer. The HBEN-108 also provides the added convenience of sharing files, hard drives, CD-rom drives and Internet connections (for those wanting faster Internet connections and the ability to have multiple users on a single Internet account, ask for more information on FutureSmart s Home Router). And for those who like to play computer games, the HBEN- 108 maintains high communication speeds for the ultimate gaming experience. APPLICATION The HBEN-108 is an auto sensing Ethernet switch, which will automatically recognize the speed of the NIC (Network Interface Card) installed on your computers, and configure itself for optimum communications. The HBEN-108 can also be cascaded, allowing you to connect multiple Ethernet hubs together. Installers will need to insure that all computers or network devices (i.e. printers, fax s, scanners, etc.) have a NIC installed, as well as appropriate networking software. The HBEN-108 can be install in any SuperPro Distribution Panel. Hub Size Single Height (takes up one expansion slot) 2.5 lbs (1.1 kg) Mounting The hub mounts in either a SuperPro or HotWired panel IEEE 802.3/802.3u 10BaseT/100BaseTX Transfer Rate 10/100Mbs Protocol CSMA/CD or CA Topology UTP Star Configuration Ports 8 RJ45 UTP Cascade 1 RJ45 UTP Max. Distance 100 Meters Power Supply 12V DC, 1000mA Power Consumption 5W Operating 0 to 40 C Temperature Storage -40 to 70 C Temperature Operating Humidity 10% to 80% non-condensing Storage Humidity 5% to 90% Media CAT5e recommended Hardware Support Any 100BaseTx or 10BaseT Compatible Software Support Software independent EMI/RFI FCC Class A Approved
40 HBAD-8 Whole House Audio Distribution Hub The HBAD-8 provides distributed audio for the home or office. With built-in impedance matching, the HBAD-8 will work with most any 100 watt stereo amplifier. APPLICATION Part No. HBAD-8 The HBAD-8 provides distribution of one speaker level (amped) signal to 8 stereo locations, 16 mono locations, or any combination between. A screw terminal is used to connect the incoming 16-4 speaker wire from the audio source, as well as the 16-4 speaker wire connecting to the volume controls and or speakers. Built-in impedance matching makes this hub capable of connecting to 8 pairs of 8 Ohm speakers. Hub Size Mounting Power Handling Wire Protection Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) The Hub mounts in all SuperPro panels. 125 watts per channel Up to 8 pairs of 16AWG Automatic load protection
41 HBADZ600 Zone Six Audio A-BUS The HBADZ600 distribution hub for FutureSmart follows the standard A- BUS protocol. It comes standard with six zones and can be expanded to another HBADZ600 for addition zones. The device is simple, compact, and easy to use for system designers, installers and consumers. FEATURES Provides connectivity to six zones of CAT5 audio. The hub is easily expandable by cascading additional A-BUS hubs to accommodate more than six speaker zones. Status of source On/Off and IR distribution. Includes A-BUS power supply, 24V DC, 2.3A Hub Size Mounting Output zones Expansion Power Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) The Hub mounts in all SuperPro panels. 6 x RJ45 to six A-BUS volume controls 1 x RJ45 to additional hub for six more zones 2.5mm DC socket (positive center)
42 HBHC-100 Home Automation Control Hub The HBHC-100 Hme Automation Control Hub provides home automation functions such as security, lighting dimming control, temperature control, audio/video control and irrigation control. The HBHC- 100 can be controlled via wall mounted consoles (keypads), telephones, cellular phones and computer software. With a Windows based software program, programming and managing the automation system is Part No. HBHC-100 easy. The HBHC-100 offers an Internet home page function (Web-Link) that allows you to access and control your home automation system from any web browser in the world. With the scene function, the home automation control hub can be programmed to execute a series of commands with the push of a single button. A common example of this is the sleep scene. When the sleep scene is selected, the home automation control will; arm the security system, turn off all lights on the system, check the garage door and, if open, close it; check the television and, if on, turn it off. These scenes are customizable and can be programmed to execute a variety of commands as determined by the customer. APPLICATION The HBHC-100 provides home automation control via X10, IR, RF or Hardwire. For home automation system with hardwire control, FutureSmart suggests running a CAT5e cable to all light switches and power outlets. Hub Size Single Height (takes up one expansion slot) 1.5 lbs (0.7 kg) Mounting The Hub mounts in all SuperPro panels Power Supply Requires 16V AC transformer, 50/60Hz Recommended 12V 4 Ah sealed rechargeable Battery Thermostats 2 Consoles 4 Scenes 16 Lighting Addresses 16 Security Points 8-24 User Codes 8 Programming Lines 100
43 MDX Combined Coax and Telephone Distribution Module The MDX provides distribution of voice, data and video signals through out the home or office. Also has a RJ31x port for a Security System. APPLICATIONS The telephone portion of this combined distribution module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 4 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. Part No. MDX The MDX comes standard with the QND-4800 Distribution Panel. However, it may be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Coax Bandwidth Coax Forward Path Coax Return Path Telephone Inputs Telephone Outputs Coax Inputs Coax Outputs Supported Cable 6 (takes up one expansion bay) 1.5 lbs. The module mounts in all QuickNetwork panels 1 Gigahertz Mhz 5-40 Mhz 4 lines, 110 punch down block 8 locations, 110 punch down block, and an RJ31x port 1 TV/CATV, 2 pass-throughs for SATV and CCTV 4 locations CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
44 MDC4-T8-RJ Combined Coax and Telephone Distribution Module The MDC8-T8-RJ provides distribution of voice, data and video signals through out the home or office. With plug and play RJ45 outputs for voice and data distribution, making changes is easy. The built-in RJ31X port provides a quick and convenient way to connect to a security system. APPLICATIONS The telephone portion of this combined distribution Part No. MDC4-T8-RJ module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 4 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. The MDC4-T8-RJ comes standard with the QND-48P Distribution Panel. However, it may be installed in any QuickNetwork Series Distribution Panel. Module Size 6 (takes up one expansion bay) 1.5 lbs. Mounting The module mounts in all QuickNetwork panels Coax Bandwidth 1 Gigahertz Coax Forward Path Mhz Coax Return Path 5-40 Mhz Telephone Inputs 4 lines, 110 punch down, and an RJ31s port Telephone Outputs 8 locations, RJ 45 Coax Inputs 1 TV/CATV, 2 pass-throughs for SATV and CCTV Coax Outputs 4 locations Standard(s) 568A, CAT5 Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
45 MDX Combined Coax and Telephone Distribution Module The MDX provides distribution of voice, data and amplified video signals through out the home or office. Also has an RJ31x port for a Security System. APPLICATIONS The telephone portion of this combined distribution module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 8 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. Part No. MDX The MDX comes standard with the QND-8800 Distribution Panel. However, it may be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Coax Bandwidth Coax Forward Path Coax Return Path Telephone Inputs Telephone Outputs Coax Inputs Coax Outputs Supported Cable 6 (takes up one expansion bay) 1.5 lbs. The module mounts in all QuickNetwork panels 1 Gigahertz Mhz 5-40 Mhz 4 lines, 110 punch down block 8 locations, 110 punch down block, and an RJ31x port 1 TV/CATV, 2 pass-throughs for SATV and CCTV 12db amplifier, to 8 locations CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
46 MDC8-T8-RJ Combined Coax and Telephone Distribution Module The MDC8-T8-RJ provides distribution of voice, data and video signals through out the home or office. With plug and play RJ45 outputs for voice and data distribution, making changes is easy. The built-in RJ31X port provides a quick and convenient way to connect to a security system. APPLICATIONS Part No. MDC8-T8-RJ The telephone portion of this combined distribution module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 8 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. The MDC8-T8-RJ comes standard with the QND-88P Distribution Panel. However, it may be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Coax Bandwidth Coax Forward Path Coax Return Path Telephone Inputs Telephone Outputs Coax Inputs Coax Outputs Supported Cable 6 (takes up one expansion bay) 1.5 lbs. The module mounts in all QuickNetwork panels 1 Gigahertz Mhz 5-40 Mhz 4 lines, 110 punch down, and an RJ31x port 8 locations, RJ45 1 TV/CATV, 2 pass-throughs for STAV and CCTV 8 locations CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
47 MDX Combined Coax and Telephone Distribution Module The MDX provides distribution of voice, data and amplified video signals through out the home or office. With plug and play RJ45 outputs for voice and data distribution, making changes is easy. The built-in RJ31X port provides a quick and convenient way to connect to a security system. APPLICATIONS The telephone portion of this combined distribution module allows up to 4 lines to be routed to 8 locations. The amplified video portion of this combined distribution module distributes 1 video signal to 8 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. The MDX may be installed in any rough-in can. Module Size Mounting Coax Bandwidth Coax Forward Path Coax Return Path Telephone Inputs Telephone Outputs Coax Inputs Coax Outputs Amplification Supported Cable 6 (takes up one expansion bay) 1.5 lbs. The module mounts in all rough-in panels 1 Gigahertz Mhz 5-40 Mhz 4 lines, 110 punch down, and an RJ31x port 8 locations, RJ45 1 TV/CATV, 2 pass-throughs for STAV and CCTV 8 locations 12dB, Bi-directional amplifier (5-42 MHz reverse path, 45 to 1000 MHz forward path) CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
48 MDX GHz Combined Coax and Telephone Distribution Module The MDX88500 provides distribution of voice, data and 2GHz video signals through out the home or office. With plug and play RJ45 outputs for voice and data distribution, making changes is easy. The built-in RJ31X port provides a quick and convenient way to connect to a security system. APPLICATIONS Part No. MDX88500 The telephone portion of this combined distribution module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 8 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. The MDX88500 can be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Coax Bandwidth Coax Forward Path Coax Return Path Telephone Inputs Telephone Outputs Coax Inputs Coax Outputs Supported Cable 6 (takes up one expansion bay) 1.5 lbs. The module mounts in all QuickNetwork panels 2.15 Gigahertz Mhz 5-40 Mhz 4 lines, 110 punch down, and an RJ31x port 8 locations, RJ45 1 TV/CATV, 2 pass-throughs for STAV and CCTV 8 locations CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
49 MDX GHz Combined Coax and Telephone Distribution Module The MDX48500 provides distribution of voice, data and 2 GHz video signals through out the home or office. With plug and play RJ45 outputs for voice and data distribution, making changes is easy. The built-in RJ31X port provides a quick and convenient way to connect to a security system. APPLICATIONS The telephone portion of this combined distribution Part No. MDX48500 module allows up to 4 lines to be routed to 8 locations. The video portion of this combined distribution module distributes 1 video signal to 4 locations, as well as providing two pass through connections for Satellite TV or closed circuit signals. The MDX48500 can be installed in any QuickNetwork Series Distribution Panel. Module Size 6 (takes up one expansion bay) 1.5 lbs. Mounting The module mounts in all QuickNetwork panels Coax Bandwidth 2.15 Gigahertz Coax Forward Path Mhz Coax Return Path 5-40 Mhz Telephone Inputs 4 lines, 110 punch down, and an RJ31s port Telephone Outputs 8 locations, RJ 45 Coax Inputs 1 TV/CATV, 2 pass-throughs for SATV and CCTV Coax Outputs 4 locations Standard(s) 568A, CAT5 Supported Cable CAT3, CAT5 or CAT5e Twisted Pair and RG59 and RG6 coax cable
50 MDC-104 Coax Distribution Module The MDC-104 Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals through out the home or office. APPLICATION The MDC-104 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. Part No. MDC-104 The MDC-104 can be installed in any QuickNetwork Series Distribution Panel. Module Size 6 (takes up one expansion bay) 1.25 lbs (0.6 kg) Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 4 pass-throughs for SATV or CCTV Outputs 4
51 MDC-108 Coax Distribution Module The MDC-108 Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals through out the home or office. APPLICATION The MDC-108 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. Part No. MDC-108 The MDC-108 can be installed in any QuickNetwork Series Distribution Panel. Module Size 6 (takes up one expansion bay) 1.5 lbs (0.7 kg) Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 2 pass-throughs for SATV or CCTV Outputs 8
52 MDC GHz Coax Distribution Module The MDC GHz Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals through out the home or office. APPLICATION The MDC distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. Part No. MDC The MDC can be installed in any QuickNetwork Series Distribution Panel. Module Size 6 (takes up one expansion bay) 1.25 lbs (0.6 kg) Bandwidth 2.15 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 2 pass-throughs for SATV or CCTV Outputs 4
53 MDC GHz Coax Distribution Module The MDC GHz Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals through out the home or office. APPLICATION The MDC distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The MDC can be installed in any QuickNetwork Series Distribution Panel. Part No. MDC Module Size 6 (takes up one expansion bay) 1.5 lbs (0.7 kg) Bandwidth 2.15 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 2 pass-throughs for SATV or CCTV Outputs 8
54 MDC-408 Coax Distribution Module The MDC-408 Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The MDC-408 includes a 12V DC power transformer and red LED light to comfrim power. Part No. MDC-408 APPLICATION The MDC-408 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the MDC-408 has been balanced to avoid signal strength problems. The eight outputs carry all signals to the desired locations. The MDC-408 comes standard with the QNP-6X Distribution Panels However, it can be installed in any QuickNetwork Series Distribution Panel. Module Size 12 (takes up two expansion bays) 4 lbs. (1.8 kg) Power Supply 12V DC Current Draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. 4 pass-throughs for SATV or CCTV Outputs 8
55 MDC-412 Coax Distribution Module The MDC-412 Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The MDC-412 includes a 12V DC power transformer and red LED light to comfrim power. Part No. MDC-412 APPLICATION The MDC-412 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the MDC-412 has been balanced to avoid signal strength problems. The twelve outputs carry all signals to the desired locations. The MDC-412 comes standard with the QNP-12X Distribution Panel. However, it can be installed in any QuickNetwork Series Distribution Panel. Module Size 12 (takes up two expansion bays) 4 lbs. (1.8 kg) Power Supply 12V DC Current Draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. 4 pass-throughs for SATV or CCTV Outputs 12 COAX SURGE SUPPRESSION Max line voltage 24Vpk Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss (10MHz-1.5Ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V
56 MDC-416 Coax Distribution Module The MDC-416 Coax Distribution Module is a high quality video distribution module designed to provide user friendly management and control of video signals throughout the home or office. With a built-in amplifier, your pictures will be sharp and clear; and built-in surge suppression protects your televisions from bothersome powers surges and spikes. The MDC-416 includes a 12V DC power transformer and red LED light to comfrim power. Part No. MDC-416 APPLICATION The MDC-416 distributes signals from TV, High Definition TV and Cable TV, as well as modulated signals from VCRs, DBS Satellite dishes, DVD players and security cameras. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. With a dedicated input for TV and Cable TV signals, as well as 4 dedicated inputs for modulated signals, the MDC-416 has been balanced to avoid signal strength problems. The sixteen outputs carry all signals to the desired locations. The MDC-416 comes standard with the QNP18X Distribution Panels. However, it can be installed in any QuickNetwork Series Distribution Panel. Module Size 12 (takes up two expansion bays) 4 lbs. (1.8 kg) Power Supply 12V DC Current draw 125ma max Amplification 20 db bi-direction video amplifier. DC and IR passing Bandwidth 1 Gigahertz Forward Path Mhz Return Path 5-40 Mhz Inputs 1 TV/CATV input; 4 inputs for modulated signals from SATV, CCTV, DVD s, VCR s, etc. 4 pass-throughs for SATV or CCTV Outputs 16 COAX SURGE SUPPRESSION Max line voltage 24Vpk Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 700A Protection modes LG Insertion loss (10MHz-1.5Ghz) 1dB Max. Category A Ringwave (L-N) 200Amps 60V
57 MDT Telephone Distribution Module The MDT Telephone Distribution Module distributes telephone and data signals throughout the home or office. A built-in RJ31X port provides a quick and convenient connection to a security system. APPLICATION The MDT distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. MDT The MDT can be installed in any QuickNetwork Series Distribution Panel. Module Size Input Output Standard Wire 6 (takes up one expansion bay) 1 lb. 4 Pairs, 110 punch down block 12 locations, 110 punch down block, and an RJ31x port USOC CAT3, CAT5 or CAT5e UTP
58 MDT-8-RJ Telephone Distribution Module APPLICATION The MDT-8-RJ Telephone Distribution Module is a versatile, full featured telephone distribution module designed to provide user friendly management and control of telephone and data signals throughout the home or office. A built-in RJ31X port provides a quick and convenient connection to a security system. Part No. MDT-8-RJ The MDT-8-RJ distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The MDT-8-RJ can be installed in any QuickNetwork Series Distribution Panel. Module Size Input Output Standard Wire 6 (takes up one expansion bay) 1lb 4 Pairs, 110 punch down 8 locations, RJ45, and an RJ31x port USOC CAT3, CAT5 or CAT5e UTP
59 MDT Telephone Distribution Module The MDT Telephone Distribution Module is a versatile, full featured telephone distribution module designed to provide user friendly management and control of telephone and data signals throughout the home or office. A built-in RJ31X port provides a quick and convenient connection to a security system. APPLICATION Part No. MDT The MDT distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The MDT can be installed in any QuickNetwork Series Distribution Panel. Module Size Input Output Standard Wire 6 (takes up one expansion bay) 1.5 lbs (0.7 kg) 4 Pairs, 110 punch down 16 locations, RJ45, and an RJ31x port USOC CAT3, CAT5 or CAT5e UTP
60 MDT-122P Telephone Distribution Module The MDT-122P Telephone Distribution Module is a versatile, full featured telephone distribution module designed to provide user friendly management and control of telephone and data signals throughout the home or office. With builtin surge suppression, your phones and modems will be protected against bothersome powers surges and spikes. A built-in Amphenol connection makes upgrading to digital telephones sytsems a snap (KSU or PBX). APPLICATION Part No. MDT-122P The MDT-122P distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The MDT-122P can be installed in any QuickNetwork Series Distribution Panel. Module Size Input Output Standard Wire KSU/PBX Interface 12 (takes up two expansion bays) 1.5 lbs (0.7 kg) 2 Pairs (2 lines) 11 locations (12 locations when used with a KSU) USOC CAT3, CAT5 or CAT5e UTP 1 25-pair Amphenol / Telco connector TELEPHONE SURGE SUPPRESSION Max line voltage 280V Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 200A Protection modes TG, RG UL Rating UL 497A Category A Ringwave (L-N) 200Amps 300V
61 MDT-124P Telephone Distribution Module The MDT-124P Telephone Distribution Module is a versatile, full featured telephone distribution module designed to provide user friendly management and control of telephone and data signals throughout the home or office. With built-in surge suppression, your phones and modems will be protected against bothersome powers surges and spikes. A built-in Amphenol connection makes upgrading to digital telephones systems a snap (KSU or PBX). A built-in RJ31X port provides a quick and convenient connection to a security system. Part No. MDT-124P APPLICATION The MDT-124P distributes signals to phones, fax machines, answering machines, caller ID s and computer modems. High-quality broadband designs and components are used throughout, assuring quality distribution from source to receiver. The MDT-124P comes standard with the QNP6X, QNP12X, and QNP18X Distribution Panels. However, it can be installed in any QuickNetwork Distribution Panel. Module Size Input Output Standard Wire KSU/PBXIinterfac e 12 (takes up two expansion bays) 1.5 lbs (0.7 kg) 4 Pairs (4 lines) 11 locations (12 locations when used with a KSU), and an RJ31x port USOC CAT3, CAT5 or CAT5e UTP 2 25-pair Amphenol / Telco connectors TELEPHONE SURGE SUPPRESSION Max line voltage 280V Circuit type (number of stages) 1 Response time >1 ps Max surge amperage 200A Protection modes TG, RG UL Rating UL 497A Category A Ringwave (L-N) 200Amps 300V
62 MDP-3 / MDP-2 Patch Module The MDP-3 and MDP-2 Patch Modules provide a user friendly interface for end user control and management of signals in a home or office. The MDP-3 provides control of three zones (rooms) with each zone containing 2 CAT5e and 2 RG-6 coax inserts. The MDP-2 provides control of two zones (rooms) each zone containing 2 CAT5e, 2 RG-6 coax and 2 fiber optic inserts. These patch modules are modular in design, allowing them to be customized to fit the exact connectivity needs of each zone. Part No. MDP-3 APPLICATION The MDP-3 and MDP-2 can be install in any QuickNetwork Series Distribution Panel. Module Size MDP-3 Zones MDP-2 Zones Mounting Wire 6 (takes up one expansion bay) 1 lbs. (0.5 kg) 3 (each zone contains 2 CAT5e and 2 Coax Inserts 2 (each zone contains 2 CAT5e, 2 coax and 2 fiber optic inserts) The module mounts in all QuickNetwork cans RG6 Quad Shielded, CAT3 or CAT5 UTP, Optional 62.5u Fiber Optic
63 MDAD8-6 Audio Distribution Module The MDAD8-6 provides distributed audio for the home or office. With built-in impedance matching, the MDAD8-9 will work with most any 100 watt stereo amplifier. APPLICATION The MDAD8-6 provides distribution of one speaker level (amped) signal to 8 stereo locations, 16 mono locations, or any combination between. A screw terminal is used to connect the incoming 16-4 speaker wire from the audio source, as well as the 16-4 speaker wire connecting to the volume controls and or speakers. Built-in impedance matching makes this module capable of connecting to 8 pairs of 8 Ohm speakers. Part No. MDAD8-6 The MDAD8-6 can be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Power Handling Wire Protection 6 (takes up one expansion bay) 1.5 lbs (0.7 kg) The module mounts in all QuickNetwork cans. 125 watts per channel Up to 8 pairs of 16AWG Automatic load protection
64 MDADZ600 Zone Six Audio A-BUS The MDADZ600 distribution module for FutureSmart follows the standard A-BUS protocol. It comes standard with six zones and can be expanded to another MDADZ600 for addition zones. The device is simple, compact, and easy to use for system designers, installers and consumers. FEATURES Provides connectivity to six zones of CAT5 audio. The module is easily expandable by cascading additional A-BUS hubs to accommodate more than six speaker zones. Status of source On/Off and IR distribution. Includes A-BUS power supply, 24V DC, 2.3A Module Size Mounting Output zones Expansion Power 6 expansion (takes up one expansion slot) 1.5 lbs (0.7 kg) The Module mounts in all QuickNetwork rough-in cans. 6 x RJ45 to six A-BUS volume controls 1 x RJ45 to additional hub for six more zones 2.5mm DC socket (positive center)
65 MDDS-4 Satellite TV Distribution Module The MDDS-4 Satellite TV Distribution Module provides distribution of Satellite TV signals from one dual LNB satellite dish to up to 4 Satellite TV Receivers and televisions. Each of the 4 Satellite TV receivers will work independently of each other, allowing customers to watch 4 different Satellite TV channels from one Satellite TV dish. APPLICATION Part No. MDDS-4 The MDDS-4 has a built-in diplexer, which will combine both Satellite TV and TV/Cable TV signals, then send them to each room through a single coax line. Installers should provide a diplexer at the room location to separate the TV/CATV signal from the Satellite TV signal; or use a Satellite dish receiver with a built in diplexer. The MDDS-4 can be installed in any QuickNetwork Series Distribution Panel. Not recommended for HDTV satellite or for Dish 500 systems with a sw1 switch Module Size 6 (takes up one expansion bay) 2.5 lbs (1.1 kg) Frequency Range MHz Current 70 ma Consumption Potential Tolerance 14/18 Volts ± 1.5 Volts Impedance 75Ω - F Connector Isolation Loss 20dB Minimum Insertion Loss -4dB Output Level 100dB uv Inputs 2 LNB, 1 TV/CATV (built-in diplexer) Outputs 4 Mounting The module mounts in all QuickNetwork cans. Capacity The module services up to four (4) DBS receiver locations, using a dual LNB DBS dish
66 MDFDS / MDFDS-R Front Door Station Module This module allows home or building occupants to speak to visitors at the front door or entry using existing telephones and a door / entry station. The Front Door Station Module does not interfere with telephone company services such as Call Waiting and Caller ID. Once installed in the QuickNetwork Distribution Panel, a cover is installed to conceal and protect the PC board. The module has an upgrade option (MDFDS-R) permitting home or building occupants to release door locks via the telephone, allowing visitors to enter. APPLICATIONS Part No. MDFDS The MDFDS / MDFDS-R comes with one door station and can accept one additional door station. The MDFDS / MDFDS-R can be installed in any QuickNetwork Series Distribution Panel. Module Size Mounting Power Supply Current draw Recommended Line Interface Wire Speaker Relay Contacts (HBV2 only) 6 (takes up one expansion bay) 2.0 lbs (0.9 kg) The module mounts in all QuickNetwork can 12V DC 25ma stand by, 125ma max RJ31X (on 12/4 TP Hub) 22-28Awg twisted pair, CAT5 recommended 8 Ohm, 25 watt
67 MDMD Triple Channel Modulator Module APPLICATION The Triple Channel Modulator Module is used for creating in-home television channels that can be viewed from any TV in the house. Signals from three different audio /video sources such as TVs, VCRs, DSS or satellite TV, DVD players and security cameras can be identified and displayed by any TV. The MDMD is a mono modulator, which will accept inputs from three different video sources. All three signals are combined to a signal output. Unlike analog modulators, the MDMD is digital and will not wander. Part No. MDMD The MDMD will install in any QuickNetwork Series Distribution Panel. Module Size Mounting Capacity Output Frequency Range Modulation Method Output Level Video Output Connector Video Input Connectors Audio Input Connectors Power Requirement 6 (takes up one expansion bay) 1.5 lbs (0.7 kg) The module mounts in all QuickNetwork cans. 3 Separate Audio/Video Inputs Ch UHF, Ch CATV, Ch CATV Digital, Crystal Stabilized PLL +25 dbmv 1- F Style 3- RCA, 75 Ohm, 1Vp-p 3-3.5mm Stereo Jacks 75,000 Ohm, 1 Vp-p 12V DC, 300mA CL2, UL Approved, Indoor use only
68 MDEN-108 Ethernet Switch Module This 8 port, 10/100BaseTX Ethernet Module creates a local area network by connecting up to five computers, printers or network devices and is capable of true 100 Mbps transmission speeds. Sharing printers over the network will cut the expense of purchasing a printer for each computer. The MDEN-108 also provides the added Part No. MDEN-108 convenience of sharing files, hard drives, CDrom drives and Internet connections (for those wanting faster Internet connections and the ability to have multiple users on a single Internet account, ask for more information on FutureSmart s Home Router). And for those who like to play computer games, the MDEN-108 maintains high communication speeds for the ultimate gaming experience. APPLICATION The MDEN-108 is an auto sensing Ethernet switch, which will automatically recognize the speed of the NIC (Network Interface Card) installed on your computers, and configure itself for optimum communications. The MDEN-108 can also be cascaded, allowing you to connect multiple Ethernet modules together. Installers will need to insure that all computers or network devices (i.e. printers, fax s, scanners, etc.) have a NIC installed, as well as appropriate networking software. The MDEN-108 can be install in any QuickNetwork Distribution Panel. Module Size 12 (takes up two expansion bays) 2.5 lbs (1.1 kg) Mounting The module mounts in all QuickNetwork cans. IEEE 802.3/802.3u 10BaseT/100BaseTX Transfer Rate 10/100Mbs Protocol CSMA/CD or CA Topology UTP Star Configuration Ports 5 RJ45 UTP Cascade 1 RJ45 UTP Max. Distance 100 Meters Power Supply 12V DC, 1000mA Power Consumption 5W Operating 0 to 40 C Temperature Storage -40 to 70 C Temperature Operating Humidity 10% to 80% non-condensing Storage Humidity 5% to 90% Media CAT5e recommended Hardware Support Any 100BaseTx or 10BaseT Compatible Software Support Software independent EMI/RFI FCC Class A Approved
69 MDEN-105 Ethernet Switch Module This 5 port, 10/100BaseTX Ethernet Module creates a local area network by connecting up to five computers, printers or network devices and is capable of true 100 Mbps transmission speeds. Sharing printers over the network will cut the expense of purchasing a printer for each computer. Part No. MDEN-105 The MDEN-108 also provides the added convenience of sharing files, hard drives, CD-rom drives and Internet connections (for those wanting faster Internet connections and the ability to have multiple users on a single Internet account, ask for more information on FutureSmart s Home Router). And for those who like to play computer games, the MDEN- 108 maintains high communication speeds for the ultimate gaming experience. APPLICATION The MDEN-105 is an auto sensing Ethernet switch, which will automatically recognize the speed of the NIC (Network Interface Card) installed on your computers, and configure itself for optimum communications. The MDEN-105 can also be cascaded, allowing you to connect multiple Ethernet modules together. Installers will need to insure that all computers or network devices (i.e. printers, fax s, scanners, etc.) have a NIC installed, as well as appropriate networking software. The MDEN-105 can be install in any QuickNetwork Distribution Panel. Module Size 12 (takes up two expansion bays 2.5 lbs (1.1 kg) Mounting The module mounts in all QuickNetwork cans. IEEE 802.3/802.3u 10BaseT/100BaseTX Transfer Rate 10/100Mbs Protocol CSMA/CD or CA Topology UTP Star Configuration Ports 5 RJ45 UTP Cascade 1 RJ45 UTP Max. Distance 100 Meters Power Supply 12V DC, 1000mA Power Consumption 5W Operating 0 to 40 C Temperature Storage -40 to 70 C Temperature Operating Humidity 10% to 80% non-condensing Storage Humidity 5% to 90% Media CAT5e recommended Hardware Support Any 100BaseTx or 10BaseT Compatible Software Support Software independent EMI/RFI FCC Class A Approved
70 MDHC-100 Home Automation Control Module The MDHC-100 Home Automation Control Module provides home automation functions such as security, lighting dimming control, temperature control, audio/video control and irrigation control. The MDHC-100 can be controlled via wall mounted consoles (keypads), Part No MDHC-100 telephones, cellular phones and computer software. With a Windows based software program, programming and managing the automation systems is easy. The MDHC-100 offers a Internet home page function (Web-Link) that allows you to access and control your home automation system from any web browser in the world. With the scene function, the home automation control module can be programmed to execute a series of commands with the push of a single button. A common example of this is the sleep scene. When the sleep scene is selected, the home automation control will; arm the security system, turn off all lights on the system, check the garage door and, if open, close it; check the television and, if on, turn it off. These scenes are customizable and can be programmed to execute a variety of commands as determined by the customer. APPLICATION The MDHC-100 provides home automation control via X10, IR, RF or Hardwire. For home automation system with hardwire control, FutureSmart suggests running a CAT5e to all light switches and power outlets. The MDHC-100 can be installed in any QuickNetwork Series Distribution Panel. Module Size 12 Horizontal (takes up two expansion bays) 1.5 lbs (0.7 kg) Mounting The MDHC-100 mounts horizontally in a QuickNetwork can, taking up two, 6 expansion bays. Power supply Requires 16V AC transformer, 50/60Hz Recommended 12V 4 Ah sealed rechargeable Battery Thermostats 2 Consoles 4 Scenes 16 Lighting Addresses 16 Security Points 8-24 User Codes 8 Programming Lines 100
71 AUD-C65 / AUD-W65 / AUD-055 Audio Speakers With Whole House Audio, you can use your home network to play music that suits your mood throughout your entire home. This option will distribute an audio signal to 8 stereo or 16 mono locations, or any combination of your choice. Individual volume controls in each room allow for personalized sound control. Ceiling-Mount Speaker Specifications Watts 80 Ohms 8 Woofer 6 ½ polypropylene Tweeter ¾ silk dome swivel Grills Paintable Micromesh Frequency Range 65 Hz to 20,000 khz Sensitivity 90 db (1W / 1M) Crossover 12 db Color White (Paintable to match your décor) Finish Dimensions 9 diameter, 3 deep Cut Out Dimensions 7 5/8 diameter AUD-C65 Wall-Mount Speaker Specifications Watts 80 Ohms 8 Woofer 6 ½ polypropylene Tweeter 1 silk dome Grills Paintable Micromesh grills Frequency Range 55 Hz to 20,000 Hz Sensitivity 90 db (1W / 1M) Crossover 12 db Color White (Paintable to match your décor) Finish Dimensions 12 H, 8 5/8 W, 3 ½ D Cut Out Dimensions 10 ¾ H x 7 ½ W AUD-W65 Indoor / Outdoor Cabinet Speaker Specifications Watts 80 Ohms 8 Woofer 5 ¼ polypropylene Tweeter ¾ titanium Grills Paintable Micromesh grills Frequency Range 80 Hz 20,000 Hz Sensitivity 89 db (1W / 1M) Crossover 12 db Color Black (AUD-055B) or White (AUD-055W) Finish Dimensions 20 ¼ H, 8 7/8 W, 3 ½ D Mounting System U shaped mounting system AUD-055B
72 AUD-75VC Audio Speaker Volume Control Individual volume controls in each room allow for personalized sound control. These volume controls mount in a standard single gang J box or mud ring. End users can pick the sound level that s comfortable for them with the 10 position rotary knob. AUD-75VC Watts Faceplate Volume Control Wire Color Dimensions 75 watts continuous Plastic decora 10 position, rotary knob Accepts up to 14 gauge, 4 conductor White 2 5/8 H x 1 5/8 W x 2 5/8 D AUD-75VC
73 AUDZ200 / AUDZ300 A-BUS Audio Speaker Volume Controls AUDZ700 A-BUS Local Input Wall Plate Individual volume controls in each room allows for personalized sound control. These volume controls mount in a standard single gang J box or mud ring. End user can pick the sound level that s comfortable for them with the rotary knob. Amplification in include in the volume controls. The local room source allows for a user to have their preferred music choice even when the rest of the house is listening to another option. AUDZ200 Volume Control Specifications Watts 7 per channel Ohms 8 Faceplate Plastic decora Volume control Rotary knob Wire Cat5 from source / 16/2 to speakers Color White or Almond Dimensions 2 5/8 H x 1 5/8 W x 2 5/8 D AUDZ300 Volume Control Specifications Watts 7 per channel Ohms 8 Faceplate Plastic decora Volume control Rotary knob- IR Input Wire Cat5 from source / 16/2 to speakers Color White or Almond Dimensions 2 5/8 H x 1 5/8 W x 2 5/8 D AUDZ700 Local Source Input Specifications Face Plate Plastic decora / allows a local source to override the main input Color White and Almond Dimensions 2 5/8 H x 1 5/8 W x 2 5/8 D
74 AUDZ500 A-BUS Audio Component Interface The AUDZ500 provides a conversion from Low level audio (RCA) outputs to Cat5 format and sends IR commands to audio equipment. Application The AUDZ500 is used when the customers amplifier does not have a A-BUS (Cat5) output. Right and left audio outputs are connected from the audio source to the AUDZ500, and then a Cat5 homerun is made to the AUDZ600 in the main distribution panel. The AUDZ6500 also has three IR Emitter outputs to control main audio equipment From any room that has a volume control w/ir (AUDZ300). Dimensions Mounting Inputs Outputs 1 H x 6 W x 4 D At the main audio equipment Right and Left Low level (RCA) 1 Cat5 and 3 IR emitters
75 LBO-1 Voice / Data Line Break Out Box The LBO-1 provides the ultimate in flexibility when choosing which telephone or data line you want to use in a room or office. Most structured wiring systems use CAT5e cable for voice and data distribution. This CAT5e cable can carry 4 lines to any receptacle location in the home or office. The LBO-1 is used to separate those 4 lines. The four output ports are RJ45 ports, which can be used with either 2 pair patch cords for devices like telephones, fax machines, caller ID boxes, modems and answering machines, or 4 pair patch cords for computer networks. The keyhole in the back of the LBO-1 allows it Part No LBO-1 to be hung from the receptacle, or you can place it on the desk. The LBO-1 also has a 4-line pass-through for added connectivity. The LBO comes with a 4 pair patch cord and an offset screw. Dimensions Mounting 2 ¾ W x 2 H x 5/8 D The LBO-1 can mount on the bottom of a receptacle or it may be placed on the desktop Inputs Lines 1-4 Outputs Port 1 = Primary line is line 4, secondary line is line 3 Port 2 = Primary line is line 3, secondary line is line 4 Port 3 = Primary line is line 2, secondary line is line 1 Port 4 = Primary line is line 1, secondary line is line 2 Pass Through Lines 1-4 EIA/TIA Color Code 568A
76 MOD-3 / MOD-1 Video Modulators A Modulator is used for creating in-home television channels that can be viewed from any TV in the house. Signals from audio /video sources such as TVs, VCRs, DSS or Satellite TV, laser disc players and security cameras can be identified and displayed by any TV. APPLICATION The MOD-3 and MOD-1 are mono modulators, which will accept inputs from most any audio/video source. Unlike analog modulators, the MDMD is digital and will not wander. The MOD-3 and MOD-1 do not mount in a FutureSmart Distribution Panel. They are to be placed in the same location as the equipment being modulated. MOD-1 Capacity Output Frequency Range Modulation Method Output Level Video Output Connector Video Input Connectors Audio Input Connectors Power Requirement 1 Audio/Video Input Ch UHF, Ch CATV, Ch CATV Digital, Crystal Stabilized PLL +25 dbmv 1- F Style 1- RCA, 75 Ohm, 1Vp-p 1-3.5mm Stereo Jacks 75,000 Ohm, 1 Vp-p 12V DC, 300mA CL2, UL Approved, Indoor use only Part No. MOD1 MOD-3 Capacity Output Frequency Range Modulation Method Output Level: Video Output Connector Video Input Connectors Audio Input Connectors Power Requirement 3 Separate Audio/Video Inputs Ch UHF, Ch CATV, Ch CATV Digital, Crystal Stabilized PLL +25 dbmv 1- F Style 3- RCA, 75 Ohm, 1Vp-p 3-3.5mm Stereo Jacks 75,000 Ohm, 1 Vp-p 12V DC, 300mA CL2, UL Approved, Indoor use only Part No MOD-3
QuickNetwork QND300 Distribution Panel
QuickNetwork QND300 Distribution Panel Installation Guide CSQND300V1 10/04 Rev. A Before You Get Started This manual is designed to provide an overview of the installation process and guidelines for installing
More informationQuickNetwork QND200 Distribution Panel
QuickNetwork QND200 Distribution Panel Installation Guide CSQND200V1 10/04 Rev. A Before You Get Started This manual is designed to provide an overview of the installation process and guidelines for installing
More informationDetailed Specifications & Technical Data
: 18 AWG stranded bare copper conductors, Flamarrest insulation and jackets, no overall jacket, all cables are Beldfoil shielded, cable jackets are color coded by application, individual jacket is sequentially
More informationDetailed Specifications & Technical Data
Description: (1) coax-20 AWG solid BC cond., gas-injected foam HDPE insul., 95% BC braid shield, PVC jkt., cabled with (1) pair-18 AWG stranded (19x30) BC cond., PO insul., Beldfoil shield, PVC jkt., cabled
More informationU S E R S G U I D E. SuperPro Distribution Panel south gateway park place, 700, draper, utah
U S E R S G U I D E SuperPro Distribution Panel 12382 south gateway park place, 700, draper, utah 84020 1.801.617.3100 www.futuresmart.com Benefits of a Structured Wiring System...3 Components of a Structured
More information9/27/04 cci Cablecom Inc. 1
cci Cablecom Inc. 1 CCI Cablecom Inc. is a privately held, women owned corporation headquartered in Aurora, CO. We manufacture a variety of voice and datacom products. Cable applications Include: Local
More informationSuperPro. Distribution Panel. Users Guide. CSSPUGV1 11/04 Rev. A
SuperPro Distribution Panel Users Guide CSSPUGV1 11/04 Rev. A Congratulations on your purchase of a SuperPro Distribution Panel. Your Distribution Panel seamlessly combines both external services and internal
More information3 Chapter Introduction. 3.2 Copper Cable
3 Chapter 3 3.1 Introduction The Network Media is the device that physically carries the data from computer to computer. The three major types of network media are: Copper Cable Fiber-Optic Cable Wireless
More informationDetailed Specifications & Technical Data
Description: 18 AWG stranded (19x30) TC conductors, polypropylene insulation, twisted pairs, individually shielded w/beldfoil (100% coverage), 20 AWG stranded TC drain wire, PVC jacket. Physical Characteristics
More informationDetailed Specifications & Technical Data
Description: 22 AWG stranded (7x30) tinned copper conductors, semi-rigid PVC insulation, twisted pairs, overall Beldfoil (100% coverage) + tinned copper braid shield (65% coverage), PVC jacket. Physical
More informationNETWORKING SOLUTIONS NETWORKING SOLUTIONS. freephone
Networking Products by C2G support the rigorous demands of enterprise applications. From 10Gb Aqua Fibre and LSZH Fibre to Cat6 and Cat5e Cables, C2G has the products to keep up with your ever-increasing
More information121700A Paired - Category 5e DataTuff Twisted Pair Cable
For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents : No. 8 for DataTwist Cables (Modified Western Electric).pdf Description: 24 AWG Bonded-Pairs solid bare copper conductors,
More informationFamily of Cords SYSTIMAX. Structured Cabling Systems. Quality Stranded and Solid Cords That Connect Data and Voice Circuits
SYSTIMAX Structured Cabling Systems Family of Cords Quality Stranded and Solid Cords That Connect Data and Voice Circuits Lucent Technologies Family of Stranded Cords includes 110 patch, modular and adapter
More information12382 South Gateway Park Place, 700 Draper, UT
I N S T A L L A T I O N G U I D E AN-300 Structured Wiring Distribution Panel 12382 South Gateway Park Place, 700 Draper, UT 84020 1.801.617.3100 www.futuresmart.com Description Features The AN-300 Structured
More informationCabling Infrastructure
Introduction Ethernet Banking on Structured Cabling Technology Drivers Classification of Cables Fibre-optic cable Cables in building Cabling Infrastructure Cabling systems address the networking requirements
More informationTelephony Multi-Taps. 9000T-TP Series
9000T-TP Series The 9000T-TP series 1 GHz twisted-pair power multi-tap taps off part of its input RF and AC, but lets the rest pass through. It divides the tapped-off signal and power into multiple outputs,
More informationIntercom System 4.1 StructuredWiringSolutions Product Description... Application Description... Product Selection... Accessories...
Intercom System.1 Product Description...................................... Application Description.................................... Product Selection........................................ Accessories............................................
More informationMounts between 16-inch (406.4) OC studs (7.2) Mounts between 16-inch (406.4) OC studs (9.5) Mounts between 16-inch (406.
-22 February 2007 Table -21. StructuredWiringSolutions Dimensions in Inches (mm) Packages Dimensions Mounting Color Zones Telephone Distribution Basic Communication Package basic video and voice distribution
More informationRun lots of CAT5 and CAT5e cable to support different high-speed applications and know at a glance which cable is for which purpose.
2007. All rights reserved. Black Corporation. FREE 24-hour Tech Support: 724-746-5500 blackbox.com CAT5/CAT5e Shielded and Unshielded Cables Run lots of CAT5 and CAT5e cable to support different high-speed
More informationCat 6 (500 MHz) UTP solid cable (PVC sheath)
JetLan is the only structured cabling system that includes all the passive elements required by the installation or modification of your data networks, as it offers all the options for high performance
More informationStandard Buccaneer - Ethernet
IP6 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k or compliant PUR / PVC jacket on cable Shielded system or shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB
More informationCable Sharing: An ANSI & ISO Recognized Solution for High Density, Low-Speed Applications. Robert Y. Faber Jr., RCDD/NTS.
Cable Sharing: An ANSI & ISO Recognized Solution for High Density, Low-Speed Applications Broadband High-Speed LAN Voice Robert Y. Faber Jr., RCDD/NTS Minimum Port Recommendations TIA/EIA-568-B.1 2 outlets
More informationContents. Structured Cabling Solutions. LAN Cables Patch Cords Connectors Patch Panels... 06
Contents Cat6 Structured Cabling Solutions U/UTP Cabling Solutions Structured Cabling Solutions LAN Cables... 03 Patch Cords... 04 Connectors... 05 Patch Panels... 06 U/FTP Cabling Solutions LAN Cables...
More informationUTP Cat 5e cable (200 MHz) (PVC sheath)
JetLan is the only structured cabling system that includes all the passive components required for the installation or adaptation of your data network, as we include all the different types of high performance
More informationPhysical Layer: Topology, Media, Standards. CompSci 275, Intro. to Networks following chapter 3 of Meyers
Physical Layer: Topology, Media, Standards CompSci 275, Intro. to Networks following chapter 3 of Meyers Topology Topology is the pattern in which network nodes are connected to each other - Physical topology
More informationStandard Buccaneer - Ethernet
IP6 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k or compliant PUR / PVC jacket on cable Shielded system or shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB
More informationITEM NO: SP-001, SP-001P, SP-001VP, SP-001VPD, SP-002, SP-002VP, SP-002VPD, SP-003, SP-004, SP-004VPD, SP-005, SP-006, SP-016C, SP-016T
Online Coaxial / Twisted Pair Surge Protection Device ITEM NO: SP-001, SP-001P, SP-001VP, SP-001VPD, SP-002, SP-002VP, SP-002VPD, SP-003, SP-004, SP-004VPD, SP-005, SP-006, SP-016C, SP-016T Application
More informationPatch Cords. Handset Cord...Page 46. Category 6 Patch Cords...Page 42. Category 5e Patch Cords...Page 42. Modular Extension Cord...
Patch Cords The Professional s Choice. VIP2000 Jacks Inserts Allen Tel Products, Inc. offers a complete line of high performance for copper and fiber applications. Our modular products also include telephone
More informationRESIDENTIAL PRODUCTS Residential Products
2012 PRODUCT CATALOG Residential Products 8.1 MSDE Enclosures... 260 8.2 Modules... 262 8.3 Economy Distribution Solutions... 265 8.4 Residential Diagram... 266 As technological advances creep from the
More informationwith its cables, connectors, Switches, Hubs and topologies
Introduction to LAN www.mycsvtunotes.in with its cables, connectors, Switches, Hubs and topologies LAN Small interconnected computers or workstations within a building or small area up to 10 Kms. Small
More informationINDUSTRIAL TRAY CABLE PRODUCTS
Overview OCC s new product line for Power and Control Tray Cable for industrial applications offers a robust and dependable product with enhanced mechanical and environmental performance features. The
More informationRCC45 ➁ Overview / /
RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721
More informationEthernet Series. Etherplug Etherlink V Etherlink V Specifications Ethernet Series
Etherplug... 10-113 Etherlink V3...114-116 Etherlink V1... 117-120 Specifications..121-122 107 Mencom Corporation TEL: 770-534-455 www.mencom.com Etherplug Cordsets PVC & PUR Cable Pole PVC Version of
More informationCategory 5e Solutions
Introduction... 5.2 Cable... 5.3 Patch Panels... 5.4 Modules... 5.5 Patch Cords... 5.8 Mutos and Consolidation Points... 5.13 Outlets... 5.14 www.adckrone.com AUS 1800 801 298 NZ 0800 657 663 5.1 Introduction
More informationPhysical Layer Part 3
Physical Layer Part 3 Transmission Media Networks: Transmission Media 1 Transmission Media Transmission medium:: the physical path between transmitter and receiver. Repeaters or amplifiers may be used
More informationLecture (03) Ethernet Protocol & Network Hardware Components
Lecture (03) Ethernet Protocol & Network Hardware Components Dr. Ahmed M. ElShafee 1 Agenda Ethernet Protocol/ and cable types Network interface card Network nodes Servers Clients Storage area network
More informationNetwork Media and Layer 1 Functionality
Network Media and Layer 1 Functionality BSAD 146 Dave Novak Dean, Chapter 3, pp 93-124 Objectives Introduction to transmission media Basic cabling Coaxial Twisted pair Optical fiber Basic wireless (NIC)
More informationTarleton State University. Specifications
Tarleton State University Campus Communication Infrastructure Specifications Cabling Standards Summary This document identifies Tarleton State University communication infrastructure standards. The communication
More informationCOMPUTER NETWORK WIRING SYSTEMS FOR PLCs
SECTION 13744 COMPUTER NETWORK WIRING SYSTEMS FOR PLCs NOTE TO SPECIFIER: This section applies to primary learning centers only. PART 1 GENERAL 1.01 SUMMARY A. Section Includes: A complete computer network
More informationPhysical Layer Part 3
Physical Layer Part 3 Transmission Media Networks: Transmission Media 1 Transmission Media Transmission medium:: the physical path between transmitter and receiver. Repeaters or amplifiers may be used
More informationCompact Module. Enhanced Category 5 UTP Cabling System
Compact Module Suitable for Gigabit Ethernet applications Shallow design requires minimal back-box depth Interchangeable with other Euro modules and 1 4 blanks Industry standard IDCs Individually QA tested
More informationNetworking Fundamentals
Networking Fundamentals Cable types and connectors Fiber A fiber optic cable consists of a bundle of glass threads, each of which is capable of transmitting messages modulated onto light waves. Fiber optics
More informationSpecial Application Cables
Special Application s West Penn Wire offers a variety of cables that meet special needs or specific applications. Most of the Special Application s manufacturered is the result of us listening to you,
More informationStandard Analog Video Cable 75 Ohm Miniature Coax
C O A X I A L C A B L E S 6.34 75 Oh Miniature Coax 30 AWG Stranded (7x38).012 Tinned Copper Tinned Copper Braid Shield (89% Coverage) Foa HDPE Insulation Black PVC Jacket Diaeter DCR Shielding OD Inch
More informationTECHNICAL DATA SHEET Family code C2424SOLPCORD CAT 6 UTP Solid. version 1 LSNH PATCHCORD date page 1/5
page 1/5 Application: High Density Switch & Hub Working area cord and telecommunications equipment cord in Local Area Networking environments Support current and future Category 6 applications, such as:
More informationintegrated markets Voice, Data & Video
integrated markets Voice, Data & Video A tradition of excellence... Exceptional Performance. Coleman Cable Inc. is a worldwide leader in the development, design, manufacturing, marketing & distribution
More informationBULLETIN. Surveillance System Camera Technology
NP 216 BELDENCableTM To suit your CCTV/Surveillance installation needs, Belden offers Banana Peel Composite cables for pan/tilt/zoom (PTZ) cameras and a wide range of single coaxes, coaxial/twisted pair
More informationBULLETIN. Surveillance System Camera Technology
NP 216 BELDENCableTM To suit your CCTV/Surveillance installation needs, Belden offers Banana Peel Composite cables for pan/tilt/zoom (PTZ) cameras and a wide range of single coaxes, coaxial/twisted pair
More informationPhysical Layer Part 3
Physical Layer Part 3 Transmission Media Computer Networks: Transmission Media 1 Transmission Media Transmission medium:: the physical path between transmitter and receiver. Repeaters or amplifiers may
More informationLEXCOM HOME NETWORK INSTALLATION GUIDE
LEXCOM HOME NETWORK INSTALLATION GUIDE The LexCom Home Network Product Overview and Installation Guide has been compiled to assist installers and consultants with the understanding, design, installation
More informationDistribution Devices - Outlets, Jacks, & Plates
35564W Modular Tel Jack 4con Eaton Wiring Devices Catalog Number 35564W Manufacturer Eaton Wiring Devices Description Telephone Jack, Modular Jack; White; Thermoplastic; 4 Wire RJ11/RJ14; Category 3; Surface
More informationUNIVERSITY OF CALICUT (Purchase Division)
No. 12831/PURCHASE-ASST-A1/2013/CU UNIVERSITY OF CALICUT (Purchase Division) Calicut University. P.O., Dated, 07.06.2013. TENDER NOTICE Sealed and competitive tenders are invited for the installation of
More informationUpon completing this chapter, you will be able to: Describe the primary types and uses of twisted-pair cables Describe the primary types and uses of
Upon completing this chapter, you will be able to: Describe the primary types and uses of twisted-pair cables Describe the primary types and uses of coaxial cables Describe the primary types and uses of
More information3M Category 6 Copper Structured Cabling System
Communication Markets Division 3M Category 6 Copper Structured Cabling System 3M RJ45 Category 6 Jacks UTP PL 3M Copper Patch Cords 3M Copper Patch Panels 3M Faceplates & Wall Outlets 3M Copper Cable 3M
More informationModular plugs, accessories and tooling
Modular plugs, accessories and tooling Introducing the new Cat 6A/6 modular plugs, slim-line boots and color clips CommScope modular plug portfolio CommScope offers a vast portfolio of Modular Plugs for
More informationTransmission Media. Criteria for selection of media. Criteria for selection of media 2/17/2016. Chapter 3: Transmission Media.
Chapter 3: Transmission Media Marks- 20 Transmission Media Transmission media carries the information from sender to receiver. Different types of cables or waves to transmit data. Data is transmitted through
More informationPlug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
More informationSubmittal Approval Form
Submittal Approval Form PROJECT: CLAY SPRINGS ELEMENTARY SCHOOL DATE: 2/17/15 SUBCONTRACTOR NAME: Tri City Electric SUBCONTRATOR ADDRESS: NUMBER AND TITLE OF SPECIFICATION SECTION: 28 13 10 Electronic
More informationLecture (07) Media & Switching III Ethernet Protocol & Network Hardware Components
Lecture (07) Media & Switching III Ethernet Protocol & Network Hardware Components By: Dr. Ahmed ElShafee ١ Agenda Ethernet Protocol Physical layer Physical layer devices The Data Link Layer ٢ Ethernet
More informationField-terminated RJ45 connector with housing. Color housing: gray (RAL 7042). Color termination block: red.
FM45 Connector Cat. 6 A IP20, 4P, TIA 568-A/B, 10x R815651 966704105 10 Stk. 090.7437 / ähnliche Abbildung Instruction manual Field-terminated connector with housing. Color housing: gray (RAL 7042). Color
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationCONNECTION TO THE FIBRE TO THE PREMISES TELECOMMUNICATIONS NETWORK
INFORMATION FOR BUILDERS AND HOME OWNERS: CONNECTION TO THE FIBRE TO THE PREMISES TELECOMMUNICATIONS NETWORK INTRODUCTION The purpose of this guide is to assist home owners and builders in understanding
More informationThe EMITEX PRODUCT GUIDE 2018/19
The EMITEX PRODUCT GUIDE 2018/19 ABOUT US QUALITY GUARANTEED Emitex was established in 2002, and since then has gone from strength to strength, becoming one of the most recognisable brands in the voice
More informationThe following pages contain a guide for the installation
INDEX The goal of this section is to illustrate how Siemon Company products can be used to support some of the most popular and emerging networks on the market. Section Contents 100Base-T....................................
More informationDTK-WH8PLUS. Premium Whole House Surge Protection General Product Specifications
DTK-WH8PLUS Premium Whole House Surge Protection DITEK s WH8PLUS Whole House surge protection kit is perfect for residential builders and contractors who desire to provide an additional, valuable service
More informationNever Beaten by Seasons
Never Beaten by Seasons Buccaneer For Data Frozen Winters! Torrential Springs! Blistering Summers! Dusty Autumns! The Buccaneer range of IP68 waterproof connectors for Ethernet, USB, Mini USB and FireWire.
More informationTIA/EIA 568A Sub-system HORIZONTAL CABLING
TIA/EIA 568A Sub-system HORIZONTAL CABLING Horizontal Cabling WA 100(120)Ω CAT 3 TP TP 100(120)Ω CAT 5 150Ω STP-A 62.5(50)/125µ FIBER HC/FD WA Horizontal Media Considerations UTP/FTP Consider bandwidth,
More informationTwisted Pair Cable Testers Int l Phone
Twisted Pair Cable Testers Int l Phone 001.804.550.1121 Main LAN ProNavigator Tester & Remote If you re a technician on the go, you need the LAN ProNavigator from Paladin Tools! Two-piece tester includes
More informationA+ Guide to Managing & Maintaining Your PC, 8th Edition. Chapter 16 Networking Types, Devices, and Cabling
A+ Guide to Managing & Maintaining Your PC, Chapter 16 Networking Types, Devices, and Cabling Objectives Learn about network types and topologies Learn about the hardware used to build local networks Learn
More informationEthernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 12
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables Cable Spools Unshielded Twisted
More informationEthernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 10
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables 0 Cable Spools Unshielded
More informationGAIN FLEXIBILITY & SAVE WEIGHT WITH B/E AEROSPACE COAX CABLES FEATURES & BENEFITS SYSTEMS SUPPORTED
SPECIALTY CABLES GAIN FLEXIBILITY & SAVE WEIGHT WITH B/E AEROSPACE COAX CABLES A leader and innovator of specialty cable designs; B/E Lighting & Integrated Systems delivers proven products that interface
More informationSpecifications PVS 200, PVS 300, PVS 400 Systems
Specifications PVS 200, PVS 300, PVS 400 Systems Overall system UTP transmission... Optimal cable length is 50' - 75' (15 m - 23 m). Minimum = 15' (5 m) Maximum = 125' (38 m) NOTE: Distances were measured
More informationBuilding Reliable Results
LOW VOLTAGE WIRE AND CABLE FOR VOICE & DATA SATELLITE TV, CATV CCTV, AND SECURITY STRUCTURED VOICE AND DATA CONNECTIVITY AND RF DEVICES NETWORK COMMUNICATIONS is a subsidiary of NETCOM which owns and operates
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationHome Networks. Principles, Applications and Desirability
Home Networks Principles, Applications and Desirability Index 1. Introduction 2. Why the demand? 3. Technologies 4. Cat5e UTP structured wiring 5. Modular concept 6. Typical applications 7. Technical information
More informationProduct Classification. General Specifications. Construction Materials. Dimensions. Environmental Specifications. General Specifications
Product Classification Portfolio FD2606-24S55-250250 HELIAX FiberFeed Pendant, 2.0, 3 x 12: Six 6 AWG conductors, 24 single mode fibers. Top breakout: 6 HQLC connector outputs. Bottom breakout: blunt cut
More informationHDMI IN HDMI IN POWER POWER INDICATOR RJ45 HDMI OUTPUT POWER POWER INDICATOR LINK ACTIVITY POWER INDICATOR
CATx Extenders (115ft/35m) (-SET-1 - -1-EM + -1-R) Single port Extender/Receiver bundle with local monitor output Extend signals up to 35 meters (115 feet) at resolutions of 1920 x 1080P -1-EM -1-R Single-port
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More information(877) ( )
Tuckwila, WA Long Beach, CA Tempe, AZ Franklin, WI St. Augustine, FL Dongguan City, China Carlisle Interconnect Technologies, 21. All trademarks, registered trademarks, service marks and tradenames are
More informationBRN WHT/BRM BLU WHT/BLU GRN WHT/GRN ORG WHT/ORG
IN OUT 1 2 3 4 WHT/ WHT/ by Audio In IR Emitters AB-404 AB-301 AB-124 A-BUS Audio System By 12 by The Channel Vision A-BUS Audio system can distribute high-quality audio to every room in your house over
More informationbarpa Values Website & Social Network
barpa Hello! Welcome to our world. Have you heard about us? We are specialized in structured cabling systems for data networks. We are able to give you the full range, from cable to cabinets, fiber optic
More informationBLACKBOX NETWORK SERVICES. one source for worldwide infrastructure services
BLACKBOX NETWORK SERVICES one source for worldwide infrastructure services 24 Port 10/100Mbps plus 2 Gigabit TX/FX Auto-MDIX Modular Gigabit Ethernet Switch User s Manual FCC Warning This device has been
More informationIntroduction to LAN Topologies Cabling. 2000, Cisco Systems, Inc. 3-1
Introduction to LAN Topologies Cabling 2000, Cisco Systems, Inc. 3-1 Objectives Upon completion of this chapter, you will be able to perform the following tasks: Media / Cabling Local Area Network Cabling
More information4.5 Components for TV/SAT, telephone installations and Category DATATEL Series - TEL DATATEL Series - CAT5 DATATEL Series - TV/SAT
Components for TV/SAT, telephone installations and Category 5 DATATEL - TEL DATATEL - CAT5 DATATEL - TV/SAT 7 7 Components for telephone installations FIXED TELEPHONE SOCKETS Type RJ Socket 6/ surface
More informationCompact Module. Category 6 UTP Cabling System
Compact Module Suitable for Gigabit Ethernet applications Shallow design requires minimal back-box depth Interchangeable with all other Euro modules and quarter blanks Fits all standard Euro faceplates
More informationResidential Cables. Table of Contents
21.1 Table Contents Residential Cables 21 Residential Cables Page Introduction 21.2 Coposite Data, Audio, Video, Security and Control Cable 21.3 21.8 Banana Peel Jacketless Cables: Category 5e 21.3 Jacketed
More informationAMP ACT 1 INSTALLING PREMISES CABLING SYSTEM. Welcome!!! Instructor : Nicholas Yeo
AMP ACT 1 INSTALLING PREMISES CABLING SYSTEM Welcome!!! Instructor : Nicholas Yeo AMP ACT 1 INSTALLING PREMISES CABLING SYSTEM Welcome!!! 2 Standards ISO CENELEC AS/NZS ANSI IEC CSA TIA EIA EN50173 AS/NZS
More information1993 SPECIFICATIONS CSJ , ETC. & SPECIAL SPECIFICATION ITEM 6132 ARTERIAL TRAFFIC MANAGEMENT SYSTEM
1993 SPECIFICATIONS CSJ 1685-05-068, ETC. & 1685-02-042 1.0 DESCRIPTION SPECIAL SPECIFICATION ITEM 6132 ARTERIAL TRAFFIC MANAGEMENT SYSTEM THIS ITEM DESCRIBES THE OPERATION AND INSTALLATION OF AN ARTERIAL
More informationEthernet Over 2-Wire. Long distance is no longer your concern. EoC-100V. EPoC-131VA. EoC-410V. EPoC-131PS. EoC-110V.
Ethernet Over 2-Wire Long distance is no longer your concern. EoC-410V -O www.i-view.com.tw We are determined to provide smart surveillance solutions to meet all kinds of challenging security demands.
More informationCables and Connectors
Module 2 Cables and Connectors Twisted Pair Two wires that carry the data signals (one conductor carries a positive signal; one carries a negative signal). Two wires are twisted to reduce the effects of
More informationSurge Protection for Surveillance Systems
Surge Protection for Surveillance Systems 1-in-1 Protection for Network Cameras 2-in-1 Protection for Power and Audio/Video Signals 3-in-1 Protection for Power, Audio/Video and PTZ Control Signals Application:
More informationCat.6/5e UTP Patch Panels with 45 Jack
Cat.6/5e UTP Patch Panels with 45 Jack Index TOOL KITS TOOL WIRING CONNECTORS LAN/DATACOMM INSTRUMENT MISCELLANEOUS POWER TOOLS FIBER OPTICS MAGNIFICATION & Our Cat.6/5e patch panels are used for high
More informationInterconnect Product CATALOG Q700
onents.com Interconnect Product CATALOG Q700 Quest Network Quest Network Warranty Products Warranty Que st Technology International Inc., carries a LIFETIME warranty on all Category- Rated link components
More informationANSI/TIA/EIA-568-B Cabling Standard
83 Pair Numbers and Color Coding The conductors in a UTP cable are twisted in pairs and color coded so that each pair of wires can be easily identified and quickly terminated to the appropriate pin on
More informationMike Meyers Network+ Guide to Managing & Troubleshooting Networks Instructor s Manual Chapter 3
Chapter 3: Cabling and Topology Learning Objectives This chapter introduces students to the concept of network topologies, and how they apply to the physical connections as well as to the flow of signals
More informationPRODUCT INFORMATION. ETHERLINE Cat.5e FLEX. Info Industrial Ethernet cable Cat.5e Only for patch cable applications (max. 60 m)
Ethernet cable Category 5e, Class D for flexible use - verified up to 100 MHz Industrial Ethernet cable Cat.5e for flexible use halogenfree or PUR (AWM-approval) outer sheath material, design 2 or 4 x2xawg26/7
More informationMD9 MULTIDROP INTERFACE INSTRUCTION MANUAL
MD9 MULTIDROP INTERFACE INSTRUCTION MANUAL REVISION: 01/05/03 COPYRIGHT (c) 1987-2003 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The MD9 MULTIDROP INTERFACE is warranted by
More informationOMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
More informationAppendix A-1: PANDUIT Copper Cabling System Technical Information PANDUIT TX5eTM Copper Cabling Conduit Fill Capacity Table
Appendix A-1: PANDUIT Copper Cabling System PANDUIT TX5eTM Copper Cabling Conduit Fill Capacity Table 2009 PANDUIT / Physical Infrastructure Reference Architecture Guide 1.0 Page A-5 Appendix A-1: PANDUIT
More information