x testo 400 The reference measuring instrument for A/C and ventilation systems Additional information at

Transcription

1 The reference measuring instrument for A/C and ventilation systems Precision reference class measuring instruments have everything the professional user needs to complete complicated measurement tasks efficiently, accurately and conveniently. includes the parameters temperature, CO2, rpm, current, voltage, relative humidity, pressure, velocity and volume flow. Intelligent electronics ensure the latest technology is used thanks to software updates. The measuring instrument can always keep up with the measurement tasks at hand thanks to upgrades. Upgradable and teachable, highly reliable and of the highest quality - they are the properties which guarantee that the customer is equipped for the future. VAC module for evaluating the measurement directly on site with integrated inaccuracy calculation Clear graphics display 3 user defined function buttons Save up to max. 500,000 readings) or print at the touch of a button Mains connection/quick battery recharge Attachable printer (optional) Prints readings on site in a matter of seconds Data communication via PC User friendly operation with cursor via menu structure Integrated reading memory for up to 500,000 readings Possibility of remote connection via GSM C Attachable printer prints readings on site in seconds Clear graphics display Data communication by PC 3 user-defined function buttons Saves or prints at the touch of a button Easy operation with cursor Useful instument functions: System accuracy up to 0.05 C and up to a resolution of C All functions of testo 650 and testo 950 Power connection/quick battery recharge Input of cross-sections for volume flow calculation 2 user defined probe sockets Absolute pressure compensation in thermal probes Density calculation for velocity measurement with reference to temperature, humidity and absolute pressure Turbulence degree measurement to EN Mean m/s m3/h Assessment of volume flow measurements with calculation of total uncertainty of measurement in accordance with EN with VAC module Assessment of measurement directly on location with integrated uncertainty calculation, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol Can be used for: Velocity, volume flow Humidity, pressure Temperature CO 2, rpm and current/voltage 1/1 (H 250 / V 500 mm) x The coordinates required for the grid measurement are shown in the instrument display. The depth information on the vane telescopic handle makes the task that much easier in practice. 24

2 Measurement systems Additional recommended sets Recommended set For fast measurements on VAC systems -, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol ( ) - ComSoft 3 - Professional with data management ( ) - RS232 cable ( ) - Bendable vane probe (can be bent by 90 ), Ø 100 mm, attachable to handle or telescopic handle , for measurements on ventilation outlets ( ) - /temperature probe, Ø 16 mm, attachable to handle or telescopic handle ( ) - Professional telescopic handle for plug-in vane probes, max. 1 m long ( ) - Attachable printer (securely attached) including 1 roll of thermal paper and batteries ( ) - SoftCase (protects instrument from impact) with carrier strap, magnetic holder and probe holder ( ) - SoftCase for attachable printer (protects printer from dirt/impact) ( ) - System case (aluminium) for measuring instrument, probes and accessories ( ) Recommended set Laboratory fume cupboard probe -, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol ( ) - Mains unit 230 V/ 8 V/ 1 A, for instrument (European plug) ( ) - Rech. batt. set for instr. (2 rech. 2.4V/1100mAh) ( ) - Thermal anemometer probe, Ø 10 mm, w. telescopic handle, measures air flow in lab fume cupboards to DIN EN ( ) - Standard ambient air probe up to +70 C ( ) - Pressure probe, 2000 hpa, measures absolute pressure, in robust metal housing with impact protection, incl. quick-closing coupling (M8 x 0.5), magnet for fast attachment ( ) - Precision pressure probe, 100 Pa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) ( ) - ( ) - Comfort level probe for measuring degree of turbulence, with telescopic handle and stand. Fulfills EN requirements ( ) We recommend: DAkkS calibration certificate/temperature * El. resistance thermometer, el. thermometer; cal. points selectable from -80 to C The pro set for assessing workplaces subjected to heat -, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol ( ) - Wet Bulb Globe temperature probe to assess workplaces subjected to heat, in accordance with ISO 7243 or DIN 33403, incl. WBGT case ( ) - Attachable printer (securely attached) including 1 roll of thermal paper and batteries ( ) We recommend: ComSoft 3 - Professional with data management incl. database, analysis and graphics function, data analysis, trend curve RS232 cable connects instrument to PC (1.8 m) for data transfer Attachable printer (securely attached) including 1 roll of thermal paper and batteries SoftCase (protects instrument from impact) with carrier strap, magnetic holder and probe holder SoftCase for attachable printer (protects printer from dirt/impact) protects from impact and falls System case (aluminium) for measuring instrument, probes and accessories probes in lid make it easy to find parts in case DAkkS calibration certificate/velocity for laboratory fume cupboard probe* ISO calibration certificate/velocity for laboratory fume cupboard probe We recommend: ISO calibration certificate/temperature for air/immersion probes, calibration points -8 C; 0 C; +40 C , the Pro set for comfort level meas. & occupational safety/health -, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol ( ) - Comfort level probe for measuring degree of turbulence, with telescopic handle and stand. Fulfills EN requirements ( ) - Attachable printer (securely attached) including 1 roll of thermal paper and batteries ( ) We recommend: CO2 probe measures indoor air quality and monitors the workplace. With plug-in head, connection cable or required The Pro Set for clean room systems -, multi-function measuring instrument, incl. store for up to 500,000 readings, VAC module (volume flow measurement with error calculation), battery, Li cell and calibration protocol ( ) - Precision pressure probe, 100 Pa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) ( ) - Precision air probe ( ) - Highly accurate reference humidity/temp. probe ( ) - ( ) - ( ) - Quick-action hot wire probe, Ø 10 mm, with telescopic handle, for measurements in the lower velocity range with direction recognition ( ) - Bendable vane probe (can be bent by 90 ), Ø 100 mm, attachable to handle or telescopic handle , for measurements on ventilation outlets ( ) - Professional telescopic handle for plug-in vane probes, max. 1 m long ( ) - Current/voltage cable (±1 V, ±10 V, 20 ma) ( ) - System case (aluminium) for measuring instrument, probes and accessories ( ) - ComSoft 3 - Professional with data management ( ) - RS232 cable ( ) Standard ambient air probe up to +70 C Measures all physical parameters in the psychrometric chart Quick-action surface probe with sprung thermocouple strip, measuring range short-term to +500 C We recommend: DAkkS calibration certificates for temperature, humidity, velocity, pressure *(See Calibration) *Successor organization of the DKD 25

3 Accessories and calibration certificates Accessories Accessories for measuring instrument Rech. batt. set for instr. (2 rech. 2.4V/1100mAh) selected for quick recharging in instrument Mains unit 230 V/ 8 V/ 1 A, for instrument (European plug) for mains operation and battery recharging SoftCase for instrument and printer SoftCase (protects instrument from impact) with carrier strap, magnetic holder and probe holder Lithium battery button cell, CR2032 AA batteries for radio handle Printer and Accessories Attachable printer (securely attached) including 1 roll of thermal paper and batteries Testo fast printer with wireless infrared interface, 1 roll thermal paper and AA batteries Fast testo 575 printer, incl. 1 roll of thermal paper and batteries infrared thermal line printer with graphics function External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug, V, 300 ma, 50/60 Hz SoftCase for attachable printer (protects printer from dirt/impact) protects from impact and falls Software and Accessories ComSoft 3 - Professional with data management incl. database, analysis and graphics function, data analysis, trend curve Spare thermal paper for printer (6 rolls) Spare thermal paper for printer (6 rolls), permanent ink measurement data documentation legible for up to 10 years Label thermal paper (Testo patent) for testo 575 printer (6 rolls), can be applied directly RS232 cable connects instrument to PC (1.8 m) for data transfer Ethernet adapter, RS232 - Ethernet incl. software driver, mains unit facilitates data communication in network System case System case (plastic) for measuring instrument, probes and accessories probes in lid make it easy to find parts in case (540 x 440 x 130 mm) System case (aluminium) for measuring instrument, probes and accessories probes in lid make it easy to find parts in case Calibration Certificates Calibration certificates/temperature ISO calibration certificate/temperature for air/immersion probes, calibration points -18 C; 0 C; +60 C ISO calibration certificate/temperature Meas. instr. with air/immersion probe; cal. points 0 C; +150 C; +300 C ISO calibration certificate/temperature meas. instr. with surface probe; calibration points +60 C; +120 C; +180 C DAkkS calibration certificate/temperature* meas. instr. with air/immersion probe; calibration points -20 C; 0 C; +60 C DAkkS calibration certificate/temperature* contact surface temperature probes; calibration points +100 C; +200 C; +300 C Calibration certificates/humidity ISO calibration certificate/humidity cal. points freely selectable from 5 to 95%RH at +15 to +35 C or at -18 to +80 C ISO calibration certificate humidity Calibration points 11.3 %RH and 75.3 %RH at +25 C ISO calibration certificate dewpoint two adjustment points -10/-40 Ctd at 6 bar ISO calibration certificate/humidity saturated saline solutions: calibration point 11.3%RH ISO calibration certificate/humidity saturated saline solutions, calibration point 75.3%RH DAkkS calibration certificate/humidity* electronic hygrometers; calibration points 11.3%RH and 75.3%RH at +25 C DAkkS calibration certificate/humidity* cal. points freely selectable from 5 to 95%RH at +25 C or -18 C to +70 C DAkkS calibration certificate/humidity* saturated saline solutions; calibration point 11.3%RH DAkkS calibration certificate/humidity* saturated saline solutions; calibration point 75.3%RH Calibration certificates/pressure ISO calibration certificate/pressure differential pressure; 5 points distributed over meas. range DAkkS calibration certificate/pressure* diff. and pos. pressure; 6 meas. points distributed over meas. range (>0.6% of fsv) ISO calibration certificate/pressure differential pressure, accuracy 0.1 to 0.6 (% of fsv) DAkkS calibration certificate/pressure* diff. and pos. pressure; 11 measuring points distributed over the instr. meas. range ISO calibration certificate/absolute pressure, 5 measurement points distributed over meas. range absolute pressure, accuracy 0.1 to 0.6 (% of fsv) DAkkS calibration certificate/pressure* absolute pressure; 11 measuring points distributed over meas. range Calibration certificates/velocity ISO calibration certificate/velocity all velocity probes, calibration points selectable from 0.3 to 50 m/s at +25 C ISO calibration certificate velocity hot wire, vane anemometer, Pitot tube; calibration points 1; 2; 5; 10 m/s ISO calibration certificate/velocity hot wire, vane anemometer, Pitot tube; calibration points 5; 10; 15; 20 m/s ISO calibration certificate velocity hot wire, vane anemometer; calibration points 0.5; 0.8; 1; 1.5 m/s DAkkS calibration certificate/velocity* hot wire, vane anemometer; calibration points 0.5; 1; 2; 5; 10 m/s DAkkS calibration certificate/velocity* hot wire, vane anemometer, Pitot tube; calibration points 2; 5; 10; 15; 20 m/s DAkkS calibration certificate/velocity* hot wire anemometer; calibration points 0.1; 0.2; 0.5; 0.8; 1 m/s *Successor organization of the DKD

4 Measurement systems Technical data Technical data Probe type Thermal Testo humid. sensor, cap. Pressure aw value ±1 digit 0 to +60 m/s See probe data for system accuracy 0 to +20 m/s See probe data for system accuracy 0 to+100 %RH See probe data 0 to hpa Probe Probe Probe Probe Probe Probe ±0.1% of mv Probe Probe Probe Probe Probe ±0.2% of mv 0 to +1 aw See probe data Resolution 0.01 m/s (for Ø 60/100 mm), 0.1 m/s (for rem. probes) 0.01 m/s (0 to +20 m/s) 0.1 %RH () hpa (Probe ) hpa (Probe ) 0.01 hpa (Probe ) 0.1 hpa (Probe ) 0.1 hpa (Probe ) 0.1 hpa (Probe ) 0.01 bar (Probe ) 0.01 bar (Probe ) 0.01 bar (Probe ) 0.01 bar (Probe ) 0.01 bar (Probe ) Probe type Pt100 Type S (Pt10Rh-Pt) Type J (Fe-CuNi) -40 to +150 C ±0.2 C (-10 to +50 C) ±1 digit ±0.4 C (-40 to C) ±0.4 C (+50.1 to +150 C) -200 to +800 C ±0.1 C (-49.9 to C) ±(0.1 C + 0.1% of mv) (remaining range) -200 to C ±(0.3 C + 0.1% of mv) 0 to C ±1 C (0 to C) -200 to C ±0.4 C (-150 to +150 C) ±1 C (-200 to C) ±1 C ( to C) Resolution 0.1 C (-40 to +150 C) 0.01 C (-99.9 to +300 C) 0.1 C (-200 to -100 C) 0.1 C ( to +800 C) 0.1 C (-200 to C) 1 C (0 to C) 0.1 C (-200 to C) Probe type CO2 probe CO probe Mechanical Current/voltage measurement Current/voltage measurement ±1 digit 0 to +1 Vol. % CO 2 0 to ppm CO 2 See probe data 0 to +500 ppm CO ±5% of mv (0 to +500 ppm CO) 20 to rpm ±1 digit 0 to +20 ma ( ) 0/4 to 20 ma ( ) ±0.04 ma (0 ( ) to +20 ma) 0 to +10 V ±0.01 V (0 to +10 V) See probe data ( ) Resolution 1 rpm 0.01 ma (0 to +20 ma) 0.01 V (0 to +10 V) 0 to +50 C Storage temp. -25 to +60 C Display LCD, 4 lines Battery type 1,5 V AA Battery life 18 h PC RS232 interface Weight 500 g Material/Housing ABS Warranty 3 years Memory Memory space: 1 MB corresponding to approx. 500,000 readings Other features: automatic probe recognition Power: Battery/rech. battery, alternatively 8 V mains unit Battery life in continuous operation with 2 T/C probes 27

5 Probes t99 Thermocouple, made of fibre-glass insulated 2000 mm -200 to +400 C Class 1** 5 s thermal pipes, pack of 5 Insulation: twin conductor, flat, oval, opposed and covered with fibre-glass, both Please order adapter Ø 0.8 mm conductors are wrapped together with fibre-glass and soaked with lacquer, please order adapter Quick-action surface probe with sprung -200 to +300 C Class 2** 3 s thermocouple strip, measuring range short-term Ø 10 mm to +500 C Conn.: Plug-in head. connection cable or required Super quick-action surface probe, probe tip at -200 to +300 C Class 2** 3 s angle, with sprung thermocouple strip Ø 10 mm 100 mm Conn.: Plug-in head. connection cable or required Robust surface probe -200 to +600 C Class 1** 25 s Conn.: Plug-in head. connection cable or required Robust surface probe with sprung thermocouple 200 mm -200 to +700 C Class 2** 3 s strip for high temperature range up to +700 C Ø 15 mm, coiled Roller surface probe for measurements on rollers 274 mm -50 to +240 C Class 2** and rotating drums, max. circumferential velocity Ø 33 mm 18 to 400m/min, coiled Magnetic probe, adhesive power approx. 20 N, 35 mm -50 to +170 C Class 2** with magnets, for measurements on metal Ø 20 mm surfaces 50 mm Magnetic probe, adhesive power approx. 10 N, 75 mm -50 to +400 C Class 2** with magnets, for higher temperatures, measures on metal surfaces Adhesive thermocouple, pack of 2, carrier -200 to +200 C Class 1** Diameter extension 2 x material: aluminium foil 0.2 mm, 0.1 mm thick Is fixed at the measuring point using conventional adhesives or silicone heat paste Fast response immersion/penetration probe -200 to +400 C Class 1** 3 s Conn.: Plug-in head. connection cable or required Super quick-action immersion/penetration probe -200 to +600 C Class 1** 1 s for measurements in liquids Ø 1.5 mm Conn.: Plug-in head. connection cable or required Super quick-action immersion/penetration probe 470 mm -200 to C Class 1** 1 s for high temperatures Ø 1.5 mm Conn.: Plug-in head. connection cable or required Super quick-action immersion/penetration probe 20 mm -200 to +600 C Class 1** 1 s for measurements in gases and liquids with a Ø 1.4 mm Ø 0.5 mm low-mass tip Conn.: Plug-in head. connection cable or required Robust immersion/penetration probe made of -200 to +400 C Class 1** 3 s V4A stainless steel, waterproof and oven-proof, e.g. for the food sector Ø 3.5 mm Smelting probe for measurements in non-ferrous melting baths, with exchangeable measuring tip (Measurement tip lifetime: up to 500 measurements in aluminium smelter) 1100 mm Ø 6.5 mm -200 to C Class 1** 60 s Spare measuring tip for smelting probe Pipe wrap probe for pipes up to 2" in diameter -60 to +130 C Class 2** 5 s Spare meas. head for pipe wrap probe, TC Type K -60 to +130 C Class 2** 5 s mm 35 mm *with EEPROM: Precision adjustment for each probe at a measuring point; measuring range limits are saved in probe; t95 extrapolation; surface allowance in surface probe can be adapted to measuring task ** According to standard EN , the accuracy of Classes 1 / 2 refer to -40 to +1000/+1200 C. 28

6 Measurement systems Probes t99 Plug-in measuring tip, 750mm long, flexible, for 750 mm -200 to +900 C Class 1* 4 s high temperatures, outer casing: stainless steel Please order handle with Plug-in measuring tip, 1200 mm long, flexible, for 1200 mm -200 to +900 C Class 1* 4 s high temperatures, outer casing: stainless steel Please order handle with Plug-in measuring tip, 550mm long, flexible, for 550 mm -200 to C Class 1* 4 s high temperatures, outer casing: Inconel Please order handle with Plug-in measuring tip, 1030mm long, flexible, for 1030 mm -200 to C Class 1* 4 s high temperatures, outer casing: Inconel Please order handle with Probes Pt100 t99 Standard air probe C Class A** 75 s Ø 9 mm Conn.: Plug-in head. connection cable or required Precision air probe -100 to +400 C 1/10 Class B (0 to 100 C) 1/5 75 s Class B (rem. range) to EN Ø 9 mm 60751** Conn.: Plug-in head. connection cable or required Robust surface probe -50 to +400 C Class B** 40 s Ø 9 mm Conn.: Plug-in head. connection cable or required Velcro probe for pipes with diameter of max mm -50 to +150 C Class B** 40 s mm Standard immersion/penetration probe 200 mm Stainless Steel -200 to +400 C Class A** 20 s Conn.: Plug-in head. connection cable or required Standard immersion/penetration probe 200 mm Nickel -200 to +550 C Class A** 20 s Conn.: Plug-in head. connection cable or required Highly accurate immersion/penetration probe incl. 295 mm Stainless Steel -40 to +300 C ±0.05 C (+0.01 to +100 C) 60 s ±(0.05 C ±0.05% of mv) certificate (-40 to 0 C) Conn.: Plug-in head. connection cable or required ±(0.05 C ±0.05% of mv) ( to +300 C) Highly accurate immersion/penetration probe 200 mm -100 to +400 C 1/10 Class B (0 to 100 C) 1/5 30 s Class B (rem. range) to EN 60751** Conn.: Plug-in head. connection cable or required Flexible precision immersion probe, cable heatproof 1000 mm 50 mm -100 to +265 C 1/10 Class B (0 to 100 C) 1/5 80 s up to +300 C Ø 3.5 mm Ø 6 mm Class B (rem. range) to EN 60751** Conn.: Plug-in head. connection cable or required Robust immersion/penetration probe with -200 to +400 C Class A** 30 s sharpened measuring tip, waterproof and ovenproof Ø 3.5 mm * According to standard EN , the accuracy of Class 1 refers to -40 to C. ** According to standard EN 60751, the accuracy of Class A and B refer to -200 to +600 C. Probes t99 Highly accurate air probe for air and gas -40 to +130 C To UNI curve 60 s temperature measurements with bare, Ø 9 mm mechanically protected sensor Globe thermometer to measure radiant heat 0 to +120 C ±0.5 C (0 to C) Ø ±1 C (+50 to +120 C) corresponds to ISO 7243, ISO 7726, DIN EN 27726, DIN requirements 29

7 More probes Ambient CO probe, for detecting CO in buildings and rooms 1.5 m 0 to +500 ppm CO ±5% of mv ( to +500 ppm CO) ±5 ppm CO (0 to +100 ppm CO) CO2 probe measures indoor air quality and monitors the workplace. With plug-in head, Vol. % CO ppm CO 2 ±(50 ppm CO 2 ±2% of mv)(0 to ppm CO 2 ) connection cable or required Conn.: Plug-in head. connection cable or required ±(100 ppm CO 2 ±3% of mv)(+5001 to ppm CO 2 ) Mechanical rpm probe with plug-in head 20 to rpm ±1 digit Included 2 probe tips Ø 8 and Conn.: Plug-in head. connection cable or required 1 hollow cone Ø 8 mm 1 surface speed disc Ø 19 mm to measure rotational speed: rpm = rotational speed in mm/s Current/voltage cable (±1 V, ±10 V, 20 ma) 0 to mv ±1 mv (0 to mv) to +10 V 0 to +20 ma ±0.01 V (0 to +10 V) ±0.04 ma (0 to +20 ma) 4 to 20 ma interface for connection and intermittent power supply to transmitters (scaling via hand-held instrument), in robust metal housing with impact protection, incl. magnet for fast attachment Conn.: Plug-in head. connection cable or required 0/4 to 20 ma ±0.04 ma Channels: 1 channel, transmitter connection via terminal board Auxiliary energy output: 18V DC ± 20% max. connection load: 30 ma Accessories, Cable, 5 m long, connects probe with plug-in head to measuring instrument, Extension cable, 5 m long, between plug-in head cable and instrument, PUR coating material Telescopic handle, max. 1 m, for probe with plug-in head, cable: 2.5 m long, Adapter to connect NiCr-Ni thermocouples and probes with open wire ends Handle for plug-in measuring tip Silicone heat paste (14g), Tmax = +260 C, improves heat transfer in surface probes Spare measuring tip for smelting probe More probes Humidity probes t99 Standard ambient air probe up to +70 C ±2 %RH (+2 to +98 ±0.4 C (-10 to +50 C) 12 s to +70 C %RH) Plug-in head. connection cable or required Duct humidity/temperature probe Telescopic handle , see Ordering data/accessories Thin humidity probe incl. 4 attachable protection caps for ambient air measurements, measurements in exhaust air ducts and equilibrium moisture measurements Fixed cable 180 mm -20 to +70 C 250 mm -20 to +70 C Plug-in head. connection cable or required ±2 %RH (+2 to +98 %RH) ±2 %RH (+2 to +98 %RH) ±0.4 C (-10 to +50 C) ±0.4 C (-10 to +50 C) ±0.5 C (-20 to C) ±0.5 C (+50.1 to +70 C) 12 s 15 s Highly accurate reference humidity/temp. probe ±1 %RH (+10 to +90 ±0.2 C (+10 to +40 C) -20 to +70 C %RH)* ±0.4 C (remaining range) 12 s ±2 %RH (remaining Plug-in head. connection cable or required range) Humidity/temperature probe %RH ±2 %RH ( ±0.4 C (+0.1 to +50 C) -20 to +70 C %RH) ±0.5 C (-20 to 0 C) ±0.5 C (+50.1 to +70 C) 12 s Plug-in head. connection cable or required * in the temperature range from +15 C to +30 C 30

8 Measurement systems Probes Process humidity t99 Standard pressure dew point probe for ±0.9 C tpd (+0.1 to +50 C tpd) measurements in compressed air systems -30 to +50 C tpd ±1 C tpd (-4.9 to 0 C tpd) s ±2 C tpd (-9.9 to -5 C tpd) ±3 C tpd (-19.9 to -10 C tpd) Plug-in head. connection cable or required ±4 C tpd (-30 to -20 C tpd) Precision pressure dew point probe for measurements in compressed air systems incl. cert. with test point -40 C tpd High humidity level probe w/ heated sensor element, no humidity on sensor Robust high temperature/humidity probe up to +180 C Flexible humidity probe (does not retain shape) for measurements in inaccessible places Plug-in head. connection cable or required -60 to +50 C tpd -20 to +85 C Plug-in head. connection cable or required -20 to +180 C Plug-in head. connection cable or required 1500 mm 100 mm -20 to +180 C Plug-in head. connection cable or required ±0.8 C tpd (-4.9 to +50 C tpd) ±1 C tpd (-9.9 to -5 C tpd) ±2 C tpd (-19.9 to -10 C tpd) ±3 C tpd (-29.9 to -20 C tpd) ±4 C tpd (-40 to -30 C tpd) ±2.5 %RH (0 to +100 %RH) ±2 %RH (+2 to +98 %RH) ±2 %RH (+2 to +98 %RH) ±0.4 C (-10 to +50 C) ±0.5 C (-20 to C) ±0.5 C (+50.1 to +100 C) ±0.4 C (+0.1 to +50 C) ±0.4 C (+0.1 to +50 C) ±0.5 C (-20 to 0 C) ±0.5 C (+50.1 to +180 C) 300 s 30 s 30 s 30 s Probes Material and equilibrium moisture t99 Flexible humidity probe with mini module for ±2 %RH (+2 to +98 ±0.4 C (-10 to +50 C) 20 s meas. e.g. on material testing rigs, module cable -20 to +125 C %RH) length 1500mm, probe tip 50x19x7mm Plug-in head. connection cable or required Sword probe for measuring humidity and 320 mm ±2 %RH (+2 to +98 ±0.4 C (-10 to +50 C) 12 s temperature in stacked material -20 to +70 C %RH) ±0.5 C (-20 to C) 18 mm x 5 mm ±0.5 C (+50.1 to +70 C) Plug-in head. connection cable or required Robust humidity probe e.g. for measuring ±2 %RH (+2 to +98 ±0.4 C (-10 to +50 C) 30 s equilibrium moisture or for measurements in -20 to +120 C %RH) exhaust ducts to +120 C Plug-in head. connection cable or required Material/building moisture cable 0 to 100 k Ohm = Display values in instrument 100 to 0 % display mean: 100 to 66 wet; to 1 very dry Probes aw value t99 aw value set: pressure-tight precision humidity 0 to +1 aw ±0.01 aw (+0.1 to +0.9 ±0.4 C (-10 to +50 C) aw) probe with certificate, measurement chamber -20 to +70 C ±0.02 aw (+0.9 to +1 and 5 sample bowls (plastic) aw) Reproducibility of aw value ±0.003 Differential pressure probe Precision pressure probe, 100 Pa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Pressure probe, 10 hpa, in robust metal housing with impact protection incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Plug-in head. connection cable or required Plug-in head. connection cable or required 0 to +100 Pa 0 to +10 hpa ±(0.3 Pa ±0.5% of mv) ±0.03 hpa Static pressure Zeroing 50 hpa 100 hpa to 20 Pa 50 hpa 1000 hpa to 0,4 hpa Pressure probe, 100 hpa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Plug-in head. connection cable or required 0 to +100 hpa ±0.5% of mv (+20 to +100 hpa) ±0.1 hpa (0 to +20 hpa) 300 hpa 1000 hpa to 4 hpa Pressure probe, 1000 hpa, measures differential pressure, in robust metal housing with impact protection, incl. quick-closing coupling (M8 x 0.5), magnet for fast attachment Plug-in head. connection cable or required 0 to hpa ±1 hpa (0 to 200 hpa) ±0.5% of mv (200 to 1000 hpa) 2000 hpa 1000 hpa to 20 hpa Pressure probe, 2000 hpa, measures absolute pressure, in robust metal housing with impact protection, incl. quick-closing coupling (M8 x 0.5), magnet for fast attachment Plug-in head. connection cable or required 0 to hpa ±5 hpa (0 to hpa)

9 Relative pressure probes Low pressure probe, refrigerant-proof stainless steel, up to 10 bar High pressure probe, refrigerant-proof stainless steel, up to 30 bar High pressure probe, refrigerant-proof stainless steel, up to 40 bar High pressure probe, refrigerant-proof stainless steel, up to 100 bar High pressure probe, refrigerant-proof stainless steel, up to 400 bar Plug-in head, connection cable required Plug-in head, connection cable required Plug-in head, connection cable required Plug-in head, connection cable required Plug-in head, connection cable required -1 to +10 bar -1 to +30 bar -1 to +40 bar -1 to +100 bar -1 to +400 bar ±1% of fsv 25 bar ±1% of fsv 120 bar ±1% of fsv 120 bar ±1% of fsv 250 bar ±1% of fsv 600 bar 25 bar 120 bar 120 bar 250 bar 600 bar Zeroing to 0,1 bar to 0,3 bar to 0,4 bar to 1 bar to 4 bar screw-in thread 7/16" UNF screw-in thread 7/16" UNF screw-in thread 7/16" UNF Screw-in thread 7/16" UNF Screw-in thread 7/16" UNF Caps for humidity probes Metal protection cage, for humidity probes, material: stainless steel V4A. Quick adjustment time, robust and temperature-proof. Used when measuring velocities of less than 10 m/s , Cap with wire mesh filter, All humidity probes with PTFE sintered filter,, PTFE. Not affected by condensation, water-repellent, resistant to corrosive substances. Applications: compressed air measurements, high humidity range (continuous measurements), high flow velocities All humidity probes with Sintered PTFE filter, material PTFE. Favourable behaviour in condensation, water repellent, high resistance to aggressive media. Applications: Compressed air measurements, high humidity range (long-term measurements), high flow velocities , , PTFE sintered filter,, PTFE. Not affected by condensation, water-repellent, resistant to corrosive substances. Applications: compressed air measurements, high humidity range (continuous measurements), high flowvelocities , , , Stainless steel sintered cap,, can be screwed onto humidity probe. protection in case of high mechanical load and high velocities All humidity probes Stainless steel sintered cap,, material: stainless steel V2A. Very rugged, suitable for penetration, can be cleaned with compressed air, mechanical sensor protection. Applications: High mechanical loads, high flow velocities , PTFE cap, Ø 5 mm, attachable, PTFE material, (5 off). Applications: dust protection, high humidity level measurements, high flow velocities Ø 5 mm Accessories: Humidity probes Cable, 5 m long, connects probe with plug-in head to measuring instrument Extension cable, 5 m long, between plug-in head cable and instrument Telescopic handle, max. 1 m, for probe with plug-in head cable: 2.5 m long, Adapter for surface humidity measurement, for humidity probes locates damp spots on walls, for example Cap for bore holes, for humidity probe Measures equilibrium moisture in bore holes testo saline pots for control and humidity adjustment of humidity probes, 11.3 %RH and 75.3 %RH with adapter for humidity probe Accessories: Pressure probes Connection cable, 2.5 m long, for pressure probes /1841/ Adapter for pressure probes, 1/2" outer thread, 1/4" inner thread for pressure probes /1841/1941/2041/2141 Cable, 5 m long, connects probe with plug-in head to measuring instrument Connection hose, silicone, 5m long max. load 700 hpa (mbar) Connection hose set, 2 x 1 m, coiled, incl. 1/8" screw connection Pressure-tight up to 20 bar, for probe /1747/

10 Measurement systems probes probe,, can be attached to handle or telescopic handle mm Probe type +0.6 to +20 m/s ±(0.2 m/s ±1% of mv) (+0.6 to +20 m/s) -30 to +140 C /temperature probe, Ø 16 mm, attachable to handle or telescopic handle /temperature probe, Ø 25 mm, can be attached to handle or telescopic handle Bendable vane probe (can be bent by 90 ), Ø 60 mm, attachable to handle or telescopic handle , for meas. on ventilation outlets 180 mm 180 mm Ø 60 mm Ø 16 mm Ø 25 mm +0.4 to +60 m/s -30 to +140 C +0.4 to +40 m/s -30 to +140 C to +20 m/s 0 to +60 C ±(0.2 m/s +1% of mv) (+0.4 to +40 m/s) ±(0.2 m/s +2% of mv) (+40.1 to +50 m/s) ±(0.2 m/s ±1% of mv) (+0.4 to +40 m/s) ±(0.1 m/s ±1.5% of mv) (+0.25 to +20 m/s) Bendable vane probe (can be bent by 90 ), Ø 100 mm, attachable to handle or telescopic handle , for measurements on ventilation outlets Ø 100 mm +0.1 to +15 m/s 0 to +60 C ±(0.1 m/s ±1.5% of mv) (+0.1 to +15 m/s) probe, Ø 16 mm, for stationary assembly, 3 m cable (PVC) 250 mm Ø 16 mm +0.4 to +60 m/s 0 to +70 C ±(0.2 m/s ±1% of mv) (+0.4 to +60 m/s) High temperature vane probe, Ø 25 mm, with handle for continuous measurements up to +350 C 560 mm Ø 25 mm +0.6 to +20 m/s -40 to +350 C ±(0.3 m/s ±1% of fsv) (+0.6 to +20 m/s) Accessories: probes Professional telescopic handle for plug-in vane probes, max. 1 m long Extension for telescopic handle, 2 m long please also order the extension cable Handle for plug-in vane probes Thermal probes Robust hot bulb probe,, for measurements in the lower velocity range, 2m cable (PVC) Probe type Hot bulb 0 to +10 m/s ±(0.03 m/s ±5% of mv) -20 to +70 C (0 to +10 m/s) Affordable, robust hot bulb probe,, for measurements in the lower velocity range, with handle Robust hot bulb probe,, with handle and telescopic handle for measurements in the lower velocity range 850 mm Hot bulb Hot bulb 0 to +10 m/s -20 to +70 C 0 to +10 m/s -20 to +70 C ±(0.03 m/s ±5% of mv) (0 to +10 m/s) ±(0.03 m/s ±5% of mv) (0 to +10 m/s) Quick-action hot wire probe, Ø 10 mm, with telescopic handle, for measurements in the lower velocity range with direction recognition 760 mm Ø 10 mm Hot wire 0 to +20 m/s -20 to +70 C ±(0.03 m/s ±4% of mv) (0 to +20 m/s) Thermal anemometer probe, Ø 10 mm, w. telescopic handle, measures air flow in lab fume cupboards to DIN EN mm Ø 10 mm Hot wire 0 to +5 m/s 0 to +50 C ±(0.02 m/s ±5% of mv) (0 to +5 m/s) Differential pressure probes Precision pressure probe, 100 Pa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Pressure probe, 10 hpa, in robust metal housing with impact protection incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Pressure probe, 100 hpa, in robust metal housing with impact protection, incl. magnet for fast attachment, to measure differential pressure and flow speeds (in combination with Pitot tube) Probe type Static pressure Zeroing Differential pressure 0 to +100 Pa ±(0.3 Pa ±0.5% of 50 hpa 100 hpa to 20 Pa probe mv) Differential pressure probe Differential pressure probe 0 to +10 hpa 0 to +100 hpa ±0.03 hpa ±0.5% of mv (+20 to +100 hpa) ±0.1 hpa (0 to +20 hpa) 50 hpa 300 hpa 1000 hpa 1000 hpa to 0,4 hpa to 4 hpa

11 Prandtl's Pitot tubes Pitot tube, long, stainless steel, for measuring flow velocity 0 to +600 C Pitot tube, 350 mm long, Ø 7 mm, stainless steel, measures flow speed Ø 7 mm 0 to +600 C Pitot tube, 500 mm long, Ø 7 mm, stainless steel, measures flow speed 350 mm Ø 7 mm 0 to +600 C Pitot tube, 1000 mm long, stainless steel, measures flow speed 500 mm Ø 7 mm 0 to +600 C mm Straight Pitot tubes Pitot tube, stainless steel, 360 mm long, for measuring flow velocity incl.temperature, for pressure probes /..1447/ mm Ø 8 mm Probe type -40 to +600 C Pitot tube, stainless steel, 500 mm long, for measuring flow velocity incl. temperature, for pressure probes /..1447/ mm Ø 8 mm -40 to +600 C Pitot tube, stainless steel, 1000 mm long, for measuring flow velocity incl. temperature, for pressure probes /..1447/ mm Ø 8 mm -40 to +600 C Accessories: Pressure probes Connection hose, silicone, 5m long max. load 700 hpa (mbar) Comfort level measurement 3-function probe for simultaneous measurement of temperature, humidity and velocity. With plug-in head, connection cable required Comfort level probe for measuring degree of turbulence, with telescopic handle and stand. Fulfills EN requirements 890 mm 270 mm Ø 90 mm Probe type Hot bulb Testo humid. sensor, cap. Hot wire 0 to +10 m/s ±(0.03 m/s ±5% of mv)(0 to 10 m/s) ±2 %RH (+2 to +98 %RH) -20 to +70 C ±0.4 C (0 to +50 C) 0 to +5 m/s 0 to +50 C ±(0.03 m/s ±4% of mv) (0 to +5 m/s) ±0.3 C (0 to +50 C) Wet Bulb Globe temperature probe to assess workplaces subjected to heat, in accordance with ISO 7243 or DIN 33403, incl. WBGT case Ø 0 to +120 C In accordance with ISO 7243 or DIN ID No /1 Accessories: 3-Function probe Accessories: 3-Function probe 34