Wireless Remote Control

Transcription

1 Quality in Command Kwant Controls B.V. P.O.Box AA Sneek-Holland Telephone +31 (0) Telefax +31 (0)

2 Quality in Command Wireless Remote Control In cooperation with ABB Netherlands. Introduction This wireless portable remote control system is a smart and convenient replacement for fixed additional control stands, thus replacing e.g. bridge wing or fly bridge consoles. It will save considerably on building costs & mounting space. Features Propulsion control: Engine RPM, Propeller pitch. Steering control: Rudders, Azimuthal thrusters. Thruster control: Tunnel thruster RPM, retractable. Joystick operation. LCD display for feedback of engine RPM, rudder angle, alarm indications etc. Fig.1 Transmitter/receiver with twin speed, rudder and bow thruster control with feedback indication Kwant Controls B.V. P.O.Box AA Sneek-Holland kwant@kwantcontrols.nl Telephone +31 (0) Telefax +31 (0)

3 Fig.2 Transmitter with speed, 360 steering and bow thruster control Safety DECT based wireless technology, providing 240 channels. Automatic selection of free channel. DECT communication is a registered system only accessible for authorized participants. Unique worldwide address coding to identify transmitter / receiver combination. Redundant diversity control by 2 processors each for transmitter and receiver. Presentation of shaft rpm, Rudder, thrusters position and relevant engine alarms on a display by means of analogue or digital (bar graph) indication. When an alarm from the engine occurs the portable vibrates and generates an acoustic signal while displaying which alarm. Presentation of battery status + pre announcing of empty battery. Presentation of RSSI radio signal strength indication. Out of range or excessive tilting will activate alarm at the Wheelhouse and will set signals to zero. Emergency stop button sets signals to zero and activates alarm at the Bridge. Control can be taken over at the Wheelhouse any time. Portable take over only allowed with all controls in neutral position. Kwant Controls B.V. P.O.Box AA Sneek-Holland kwant@kwantcontrols.nl Telephone +31 (0) Telefax +31 (0)

4 Miscellaneous Interface between receiver and propulsion / steering systems: analogue signals e.g. 4-20mA or 0-10VDC; digital inputs/outputs; CAN-Bus / Profibus / device net, RS232 or RS 485. Receiver with integrated or external active antenna with data cable (L = 5-50m). Dimensions receiver 165x165x115mm or 270x160x115 mm. Power supply receiver 10-30VDC. Power supply portable transmitter with NIMH rechargeable battery, (operating time approx. 20 hrs continuous operation). Spare battery and battery charger included. Fig.3 Receiver with integrated antenna The wireless remote control system is type approved by GL (certificate on next page). Kwant Controls B.V. P.O.Box AA Sneek-Holland kwant@kwantcontrols.nl Telephone +31 (0) Telefax +31 (0)

5 Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested in accordance with the relevant requirements of the GL Type Approval System. Certificate No HH Company HBC-radiomatic GmbH Haller Straße Crailsheim, GERMANY Product Description Type Environmental Category Technical Data / Range of Application Radio Remote Control Transmitter: spectrum Receiver: FSE 735 F; EMC1 Transmitter spectrum 1/2/3 Unique system addresses: over combinations Transmitting Power: FuS 671/ FuS680: < 10 mw synthesizer TC 641: < 10 mw synthesizer TX681 / TC TC 682: < 10 mw synthesizer TX691 / TC TC 692: < 10 mw synthesizer DECT: nominal 10 mw / 250 mw pulsed Frequency Range : FuS 671/ TC 641: MHz TX681 / TC TC 682: MHz TX691 / TC TC 692: MHz DECT: MHz Max. No. Of control commands: Sepctrum 1/2/3: 32 digital + STOP or 24 digital + 8 proportional + STOP Battery Type : Sepctrum 1/2: FuB 05 AA / BA Sepctrum 3 : FuB 10 AA / BA / BA / BA Test Standard Guidelines for the Performance of Type Approvals Part 2, Edition 2003 Regulations for the Use of Computers and Computer Systems Documents Test report : MHM-EST and MHM-EST e dated ; 2_0203-B/98 dated ; 2_0203-Aa/98 dated ; Operating Instructions BE-SP123-V1-5 dated and BE-735-V2-8 dated ; Additional Technical Data Remarks None Valid until Page 1 of 2 File No. I.E.03 Hamburg, Type Approval Symbol Marco Rinkel Andrea Grün This certificate is issued on the basis of "Regulations for the Performance of Type Tests, Part 0, Procedure". Internet Publication: GL-Approvals

6 Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested in accordance with the relevant requirements of the GL Type Approval System. Certificate No HH Receiver FSE 735 Max. Nos. of control commands : 32 digital or 8 analog + 24 digital Resolution per analog channel : 8 bit Unique system addresses : over combinations Frequency range: FuE 671/ TC 641: MHz FuE680 : MHz TC TC 682: MHz TC TC 692: MHz DECT: MHz Channel increments : 12,5 / 20 / 25 / 50 / 250 KHz 1,728 MHz (DECT) Command output : relays 30 V DC / 4A or 250 V AC / 4A 0 2 A for electro-hydraulic valves 0 +/- 10 V DC Operating voltage : AC V; 50/60 Hz DC V Tests and Evidence regarding Requirement Class 3 Software Version Transmitter BVC_Uxx NAC_Uxx Receiver DNA30_xx for ST62T30B DNA Modul DNA65_xx for ST62T65B DNA Modul Transmitter Options: Cable Control Option Valid until Page 2 of 2 File No. I.E.03 Hamburg, Type Approval Symbol Marco Rinkel Andrea Grün This certificate is issued on the basis of "Regulations for the Performance of Type Tests, Part 0, Procedure". Internet Publication: GL-Approvals

7 TYPE APPROVAL CERTIFICATE This is to certify that the undernoted product(s) has/have been tested in accordance with the relevant requirements of the DNV GL Type Approval System. Certificate No HH Company HBC-radiomatic GmbH Haller Straße Crailsheim, GERMANY Product Description Type Environmental Category Technical Data / Range of Application Test Standard Radio Remote Control Transmitter: spectrum Receiver: FSE 737 C; EMC2 Transmitter spectrum Activation: button combination STOP function: STOP impact switch Operating elements side: up to 8 push buttons Operating elements front panel: up to 4 joysticks or 8 linear levers (or combination of linear levers and joysticks); various push buttons, toggle or rotary switches (maintained / spring-return) and other operating elements Proportional commands: 8 radiomatic ion / ilog: radiomatic ilog APO (Automatic Power-Off): configurable (standard: 15 min after last command input) Feedback: 3.5" TFT, LED; vibration alarm (optional) LEDs: operating / battery status; feedback GL-Guidelines for the Performance of Type Approvals, Chapter 2- Test Requirements for Electrical / Electronic Equipment and Systems (VI-7-2), Edition 2012 Documents Test report : A-09 and A-05-e dated Operating Instructions: AO737G06 dated 2012; AOSDOG02 dated 2012 Data Sheets: FSE 737 dated and Spectrum D dated Software Release Notes: SE0D2011 dated ; SA002115, SB and SY dated ; SS dated Remarks This certificate is issued on the basis of GL Guidelines for the Performance of Type Approvals, Chapter 1 - Procedure (VI-7-1), Edition Valid until Page 1 of 2 File No. I.E.03 Hamburg, Type Approval Symbol DNV GL Marco Rinkel Andrea Grün Internet Publication: GL Approvals

8 TYPE APPROVAL CERTIFICATE This is to certify that the undernoted product(s) has/have been tested in accordance with the relevant requirements of the DNV GL Type Approval System. Certificate No HH Transmitter spectrum Frequency range / Management: MHz; MHz (Not all frequency ranges available); MHz; MHz; manual frequency switch; DECT; 2.4 GHz; radiomatic AFS / AFM Receiver FSE 737 radiobus Antenna: external FL 30 or FL 70 Black / white control commands (on / off): up to 50 relays Max. number of control commands: 50 digital or 10 analog Unique system addresses: over combinations Relay output: 4 A / 250 V Proportional channels: up to 10 Number of flexcards: 5 Interfaces: CANopen, CANopen Safety, Profibus, RS232/485, DeviceNet, SAE J1939, Profinet, iqan E-STOP (Emergency-Stop): 1 x E-STOP output, 2 relays 4 A Safety function: Performance Level d, category 3 according to EN ISO :2008 LEDs: operation status / RF / Si1 / Si2 Power supply: V DC; 24 V DC Power consumption DC: max. 16 W Connection: Harting plug Han 32A, Han 50D Cable option: Frequency ranges / Management: optional; via CAN MHz; MHz (Not all frequency ranges available); MHz; MHz; DECT; 2.4 GHz; radiomatic AFS / AFM Tests and Evidence regarding Requirement Class 3 Software Version Transmitter SE0D2011 dated Receiver SA002115, SB002114, SY dated SS dated Valid until Page 2 of 2 File No. I.E.03 Hamburg, Type Approval Symbol DNV GL Marco Rinkel Andrea Grün Internet Publication: GL Approvals