RT02 Series Robust Industrial Joystick. RunnTech

Transcription

1 Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick RT0 Series Robust Industrial Joystick Product Features Potentiometer sensor or Hall sensor; Single axis, dual axis or axis control; Resistant to oil, maritime climate, ozone and UV radiation; Mechanical spring-return to center or Friction-hold operation; Excellent analog proportional control or CAN bus.0 or RS signal output; Easy to install, flexible operation, uniform texture, maintenance-free million life cycles. Application 0 series robust industrial joystick controller, is is designed for hydraulic proportional control and variable frequency motor control, such as Construction machinery, Precision machine, Military robotics, Refuse handling trucks, offshore, Rotary drilling rigs, Cranes, Marine etc. Available in one, two or three axis configurations, this joystick can be supplied with non-contact Hall effect sensors or long life potentiometer tracks. Technical Information Environment Parameter Storage Temperature Operating Temperature Protection Grade Vibration Amplitude±g, Frequency: 0Hz-00Hz Impact 0g, ms, Semi-sinusoidal EMC Anti-interference Rank 00V/m, 0MHz to GHz, 80% sine-wave modulation, meet EN008- (99) standard EMC Emission Rank Rank B, 0KHz to 0MHz, meet EN008- (99) standard ESD Anti-interference Rank Rank, 8KV contact discharge, KV air discharge, meet IEC000-- standard Mechanical Parameter Mechanical Angle Operating Torque Mechanical Life Mechanical Error Electrical Parameter -0 C +80 C -0 C +80 C IP Potentiometer: ±, Hall sensor: ±0 N (0N max) million ±0. Power Supply Voltage ±0.V DC Hall sensor Power Supply Current Consumption.mA/hall sensor tel: fax: info@runntech.com website: 0

2 RT0 Series Robust Industrial Joystick Electronics (Changzhou) Corp. Resolution Ratio infinite Maximum Voltage VDC Hall sensor Reversed Polarity Maximum Voltage.VDC Potentiometer Product Configuration Serial Number Operation Mode Limiter Plate Electrical Output Form Load Resistance KΩ Median Voltage (no-load) 8 - %Vs Power Supply Voltage DCV Power Supply Current <0mA Resolution Ratio infinite Resistance (0%) KΩ and 0KΩ Electrical Angle ± Output Voltage Range (relative voltage) 0 00%; 0 90% Median Voltage 8% % Potentiometer Maximum Load Voltage VDC Maximum Power Consumption ( C) 0.W Switch Direction switch position ± No. Item Content RT0 Series Robust Industrial Joystick M - Friction hold T - Spring return to center MS - Friction hold & Self-lock. Y axis. Y & X axis cross direction. Y & X axis full direction Hall sensor Potentiometer HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V: DCV, 0 +V (voltage output) I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 0 tel: fax: info@runntech.com website:

3 Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick Potentiometer Type K, K, K, 0K, 0K or H (Hall sensor) Quantity of Switch Signal 0, 0 or 0 (the quantity of directional switch signal in each axis) 7 Switch Signal Closed Position Refer to Table - Directional Switch Signal Closed Position 8 Handle/Grip Type Refer to Table - -8 Handle: HD9, HD0, HD, HD0 9 Mounting Dimensions M: 7 7, central hole 9 serial number operation mode limiter plate electrical output form potentiometer type Product Installation RT0 - T - - P (0K) - 0 (89) - HD0b-BTRBSY - M - 0 (wire outlet length 0cm) wire outlet length mounting dimension button location handle type switch signal closed position quantity of switch signal tel: fax: info@runntech.com website: 0

4 RT0 Series Robust Industrial Joystick Electronics (Changzhou) Corp. Table - Handle Type HD9 HD0 HD HD0 Multi-combinations, Refer to Table - Multi-combinations, Refer to Table - -7 with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Pull to release Diameter 0x0 Diameter 7x0 0 tel: fax: info@runntech.com website:

5 Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick Table - Handle HD9 HD9 Handle HD9 handle can be installed with a variety of accessories: self-lock button and self-resetting button. With different combinations to meet the industry's needs: solenoid valve amplifier control, variable frequency motor control. We can customize special technical parameters according to your requirements. HD9 handle use PA + 0GF, with excellent high temperature performance, can be installed in Joystick RT00 and RT0 to achieve multi-axis control Operation Temperature: -0-8 Storage Temperature: -0-8 Meet IEC8 part -0 Protection Grade IP/ HD9 - BT 7 R BS G 7 handle type self-resettling button button quantity button location 8 button color button location button color button quantity self-lock button button selection reference Table - tel: fax: info@runntech.com website: 0

6 RT0 Series Robust Industrial Joystick Electronics (Changzhou) Corp. Table - Handle HD0 HD0 Handle 07 0 HD0 handle is ergonomically designed, provides a high degree of comfort, highly integrated, multi-channel buttons control output and the handle can be installed with a variety of accessories: analog output of thumbwheel controller, self-resetting (momentary) push button, self-locking push button or rocker switch. With different combinations to meet demands of industrial application for example: solenoid valve amplifier and variable frequency motor control. HD0 handle/grip uses PA + 0GF, with excellent high temperature performance, can be installed in joystick of RT00, RT00, RT0 and RT0 to achieve multi-axis control. Operation Temperature -0~-8 Storage Temperature -0~-8 C Meet Standard IEC8. part -0 Protection Grade IP/ Model Selection Style Description (all functions selection refer to the Table - HD0a 0 without Deadman trigger HD0b BT with Deadman trigger 0 tel: fax: info@runntech.com website:

7 Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick Table - Handle HD0 Button Panel Model Selection Style Description (all functions selection refer to the Table -) W00 W00 W00 Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) tel: fax: info@runntech.com website: 07

8 RT0 Series Robust Industrial Joystick Table - Handle HD0 Button Panel Electronics (Changzhou) Corp. Model Selection Style Description (all functions selection reference Table -) 0 handle type handle panel model code self-resettling (momentary) button button quantity W00 Q proportional thumbwheel controller (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) HD0b - BT R G - QTOT button selection refer to Table - position self-resetting rocker switch button color button location 08 tel: fax: info@runntech.com website:

9 Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick Table - Accessories No. Type Description Parameter Remark 7 8 BT BS QTOT QTO QSOS QSO QSOT W00 Self-resetting button Self-locking button position self-resetting rocker switch position self-resetting rocker switch position self-locking rocker switch position self-locking rocker switch position with one side self-resetting, another side self-locking Thumbwheel Controller (Hall Sensor) VA VA pins 0VA pins 0VA pins 0VA pins 0VA pins 0VA input V output 0-.-V button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W Warning: Please Far away from the magnetic object tel: fax: info@runntech.com website: 09

10 RT0 Series Robust Industrial Joystick Table - Directional Switch Signal Closed Position Electronics (Changzhou) Corp. Electrical Output Form Entity on behalf of the switch is closed Hall sensor Potentiometer Analog output refer to the following figure 0 HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V: DCV, 0 +V (voltage output) I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 08 tel: fax: info@runntech.com website: