Example for a VISONIK system configuration:

Transcription

1 85P0 85P PLD0.TOWER PLD0.RACK VISONIK PLD0.TOWER DCS Data and Communication Server PLD0.RACK Data and communication servers (DCS) are used as management stations in building automation and control (BAC). With DDC technology, the DCSs, as superposed system components, allow for customer-specific solutions of all building automation and control tasks. Use The DCS' application range comprises a large number of building automation and control tasks such as: CMN8577en_ Process station communication at the subsystem level. Processing of acquired process data in real time. Continuous storage of selected process values (temperatures, setpoints, etc.). Monitoring of technical installations. Output of higher commands (e.g. peak load control, emergency power and network restoration). Logging of plant faults. Alarming of internal and external service organizations. Sending clear text messages based on technical plant events. Triggering reactions based on various causes: Time, date, process value changes and operating hours (maintenance). Simultaneous execution of various BAC tasks (multitasking). HVAC Products

2 Presentation of process values, consumption variables, efficiency degrees and further operational and technical system information in transparent displays. Operation of system-wide BAC functions via graphical user interfaces. Connection of linked and third-party systems. Operation of building automation and control systems via networks. Type summary The PLD0-series of the DCS data and communication server consists of two housing types with scalable software licenses and hardware options. Tower housing: 9 rack housing: PLD0.TOWER PLD0.RACK DCS for 00 subsystems Option : Number of subsystems, 0, 5, 5, 50, 75, 00, 50, 00 Option : VISONIK Version V Option : R-server redundant server operation System configuration Example for a VISONIK system configuration: / Building Technologies Group DCS Data and Communication Server PLD0.TOWER / RACK CMN8577en_

3 Basic hardware The data and communication server is delivered with the following hardware components: We reserve the right to make changes to the basic hardware configuration. Required number of computer types PLD0... Basic PC Caution: The computers are delivered without keyboard and monitor! Tower Housing (tower or 9 rack). Mouse CPU hard drive supporting - mouse (PS/) - keyboard (PS/) - LAN, x RJ5 - COM serial RS-3-C (9-pin) - Centronics parallel interface (5-pin) - 5 USB interfaces ( x front panel, x back, x internal for backup drives) - SAS LSI 078 for HDD s with RAID or RAID5 - I/O slots PCI-Express x8, short - I/O slot PCI-Express x, short - 3 I/O slots PCI 3-bit / 33MHz, x long (5V) - SATA controller with ports for DVD / DVD-RW drives - VGA graphics (5-pin) Intel XENON processor UP 305 / memory.33 GHz Dual Core / x GB DDR- PC-M multifunction card with: - Watchdog - Radio clock - Auto reset WD - Front control panel including cable set Network card on main disk. Equipment for connection of BLN and terminal server. Storage media: Rack Order number FDD. MB DVD-RW. SATA Hot plug hard drive SAS 73 GB 3.5 ALD0.F Basic software The data and communication server is delivered with the following preinstalled software: Computer type PLD0. Tower Rack Windows XP Professional x x VISONIK software (functionality according to version and computer type). x x VISONIK DCS license for process stations. x x VT00 emulator to connect terminals in a window to $T. x x Acronis x x Building Technologies Group DCS Data and Communication Server PL D0.TOWER / RACK CMN8577en_ /

4 Options The following software and hardware components can be installed in addition to the basic installation. We reserve the right to make changes to the basic hardware configuration. Possible number of computer types PLD0... Tower Rack Order number PCIe graphics card, 8 MB, for higher performance USB-analog modem USB-ISDN modem PCI audio card PLD0.G8/E ALD0.ANALOG ALD0.ISDN ALD0.AUDIO Uninterrupted power supply (UPS) APC SU-000 Redundant power supply ALD.USV ALD0.RPS Equipment for connection of BLNs. SDLC/FSK kit to operate SDLC rings incl.: ALD0.S/KIT - PC-S Express card - Connection cable to SDLC plug panel - SDLC plug panel x5 D-sub. Connection units to the SDLC rings, (number per ring; not part of delivery) LVR.3 Connection cable to connection units (length m or m, number per ring; not part of the delivery). Equipment for additional interfaces: LVR.0 LVR.0-E Terminal server ( x V. interfaces), incl. - power supply (30 VAC / VDC) - adapter cables CBL-RJ5M9-50. Terminal server ( x V. interfaces), incl. - power supply (30 VAC / VDC) Terminal server (8 x V. interfaces), incl. - mains cable (30 VAC) - adapter cables.5m, type CBL-RJ5M adapter cables.5m, type CBL-RJ5M RJ5 loopback test plug - mounting brackets for 9 - rubber bases Terminal server ( x V. interfaces), incl. - mains cable (30 VAC) - 8 adapter cables.5m, type CBL-RJ5M adapter cables.5m, type CBL-RJ5M RJ5 loopback test plug - mounting brackets for 9 - rubber bases ALD.TS ALD.TS ALD.TS8 ALD.TS Storage media: RDX drive 80-0 GB for upgrades and data backup, incl. - RDX cartridge 80/0 GB. DAT drive DDS-5 incl. - mounting kit - 3 tapes ALD0.RDX ALD0.DAT Hot plug hard drive 73 GB SAS for expansion to RAID Hot plug hard drive 73 GB SAS for expansion to RAID5 Memory DDR- GB extended memory 3 3 ALD0.F ALD0.F ALD0.MEM/GB / Building Technologies Group DCS Data and Communication Server PLD0.TOWER / RACK CMN8577en_

5 Computer performance characteristics Below is a list of performance features not readily apparent from the list of components and accessories above. Furthermore, a few important VISONIK system variables are listed. Options are printed in parentheses. Computer types PLD0... Tower Rack Basic feature: Upgradeability to higher PLD types and options Yes Yes Watchdog, reset, radio clock, control panel. Yes Yes RAID or 5 (redundant array of independent disks). Yes Yes Interfaces: Parallel interfaces USB plugs 3 3 Serial interfaces - Terminal server x V. interfaces (RS3) - Terminal server x V. interfaces (RS3) - Terminal server 8 x V. interfaces (RS3) - Terminal server x V. interfaces (RS3) Operation: Total number of terminals, printers and modems Standard Maximum Standard Maximum Maximum number of dial modems Operating system languages (3) (3) Number of access levels 5 5 Maximum number of concurrent users 5 5 System variables: Maximum number of connections for SDLC rings Maximum number of process stations (EKL-X, PRV, PRV, BPS, CFE ) on BLN (SDLC, Ethernet) or via modem Addressing (alphanumeric user address), number of characters Linked system: Number of VISONIK computers within linked system 0 0 Alarm printer for messages from various systems possible in each system Yes Yes 0 8 (5) 0 8 (5) Security VISONIK computer as R-server; redundant operation of VISONIK server possible as an option via network. Yes Yes * The maximum number of 5 messaging channels or 8 terminal channels respectively per DCS cannot be exceeded. The indicated standard characters represent a recommendation. We reserve the right to make changes to the computer configuration. Documentation See the following data sheets for information on VISONIK subsystems: BPS process station Building process station BPS/NetBPS EcuBPS CMN830 CMN830 CMN8307 Building Technologies Group DCS Data and Communication Server PL D0.TOWER / RACK CMN8577en_ /

6 Technical data If not mentioned specifically, the following information applies to all computer types. Power supply Mains supply PLD0.TOWER and PLD0.RACK Mains frequency 00-0 V 50-0 Hz Dimensions Max. rated current: PLD0.TOWER and PLD.0.RACK Active power H x W x D PLD0.TOWER PLD0.RACK PLD0.RACK (installation depth) 00 V 0 V / A 3 A - 3 W x 05 x 05 mm x 8 x 07 mm 5 height units (U) Weight PLD0.TOWER and PLD0.RACK ca. 8 Kg (depending on configuration). Ambient conditions Operating temperature C (DIN IEC 7-3-3) BLN data transmission System bus protocol SDLC/FSK V. data transmission Transmission rates for terminals, INSIGHT, printers and modems As per the specifications Network data transmission Transmission protocol Networks Rate of transmission Chip TCP/IP, NetBIOS via TCP/IP Ethernet 0/00/000 Mbps Broadcom 57 conformity Electromagnetic compatibility Product standard EMC directive Low voltage guideline Emissions Immunity Safety of information technology equipment 89/33/EEC 73/3/EEC EN 55 0 class A; EN 550 EN and EN IEC 0950 / EN 0950 UL rd. Ed. CAN/CSA-C, No rd. Ed. 008 Siemens Switzerland Ltd. Subject to change / Building Technologies Group DCS Data and Communication Server PLD0.TOWER / RACK CMN8577en_