DIRIS Digiware Measurement and monitoring system for electrical installations

Transcription

1 Multi-circuit metering & new diris-dw_006_a_cat diris-dw_005_a_cat diris-dw_004_a_cat The solution for > ndustry > Building > nfrastructure > Local authority Configuration with EasyConfig, see page 42. The Digiware system is a hub of technological innovations that revolutionises the world of s, bringing a high degree of flexibility to installations and making connection and configuration easy. These innovations, together with unrivaled performance in terms of accuracy and functionality, make Digiware the most effective solution for metering consumption, measuring and monitoring the quality of electrical energy in industrial and commercial applications. Advantages Digiware D-50 Multi-circuit Ability to monitor several circuits via a single current module due to independent current inputs. Accuracy as per standard EC Class 0.5 from 2% to 20% of nominal current for the global chain (associated with TE/TF current sensors). Class 0.2 for the meter alone. Example of displays on Digiware D-50 Digiware U-0 Digiware -5 Management and optimisation of the power installed Digiware allows you to identify most demanding loads and monitor abnormal electrical values, providing you with a perfectly-managed electrical network. Simplified network maintenance: the electrical energy quality monitoring functions offered by Digiware make it easier to anticipate electrical malfunctions. Cost effective and flexible mplementation in a quarter of the time vs existing technologies. nstallation of modules and sensors at the closest point to the load. Shared functions: - Common display. - Single voltage for the entire system. - Single auxiliary power supply. Compact design: suitable for new and existing installations including panels with space restrictions. Large range of current sensors Strong points > Multi-circuit > Global accuracy class 0.5 in accordance with EC > Cost effective and flexible > Plug & Play Plug & Play RJ2 current sensor connection - Automatic detection of ratings. - dentification of cables by color-coding. - Disconnection of the current sensor secondary under load. interconnection of and U modules via Digiware bus. Auto-configuration of parameters: Network and load type - addressing of devices connected to the bus. diris-dw_00_a cat diris-dw_0_a cat Conformity to standards > EC > SO 4025 > UL 20 Catalogue

2 Digiware System display voltage module current modules current sensors diris-dw_0_a_cat Control and power supply interface (DC) oltage module modules or + + Digiware D-xx High-resolution LCD display Centralisation of points: - circuit selection, - data display. Keys on the front face for direct access to: - data, - circuits selection, - device configuration. DC power supply. D50 D40 nput Digiware Digiware Output Ethernet Digiware C- No-display mode Centralisation of Digiware data on Modbus DC power supply Communication - Digiware Bus, - Modbus. Digiware U-xx U-0 - U2, U2, U,, 2,, f U-20 - U2, U2, U,, 2,, f - THDv, THDv2, THDv, THDu2, THDu2, THDu U-0 - U2, U2, U,, 2,, f - U system, system - Ph/N unbalance (nb, nba, dir, inv, hom) - Ph/Ph unbalance (Unb, Unba, Udir, Uinv) - THDv, THDv2, THDv, THDu2, THDu2, THDu - ndividual harmonics U & (up to rank 6) - oltage dips, interruptions and swells (EN 5060) - Alarms - History of average values Digiware -x inputs -0 / ± kwh, ± kvarh, kah -, 2,, n, ΣP, ΣQ, ΣS, ΣPF - / -6 - ± kwh, ± kvarh, kvah - Multi-tariff - Load curves -, 2,, n, ΣP, ΣQ, ΣS, ΣPF - / -4 - ± kwh, ± kvarh, kvah -, 2,, n, ΣP, ΣQ, ΣS, ΣPF - P, Q, S, PF per phase - THDi, THDi2, THDi, THDin Digiware -4x 4 inputs Digiware -6x 6 inputs -5 / ± kwh, ± kvarh, kah - Multi-tariff - Load curves -, 2,, n, ΣP, ΣQ, ΣS, ΣPF - P, Q, S, PF per phase - Predictive power (ΣP, ΣQ, ΣS) - System - unbalance (nba, dir, inv, hom, nb) - Phi, cos Phi, tan Phi - THDi, THDi2, THDi, THDin - ndividual harmonics (up to rank 6) - Overcurrents - Alarms - 2 inputs / 2 outputs (-45) - History of average values Catalogue

3 Terminals Power Supply DC Digiware D-50 OR Outputs C- U D-0 () Ethernet -x -4x BUS end of line -6x oltage diris-dw_020_b gb_cat Power Supply DC Communication nputs () a local single-point D-0 display can be connected to the -45 module diris-dw_05_a cat Digiware D-40 Digiware D-50 diris-dw_054_a x_cat Digiware LYCY-CY SLAE 24DC diris-dw_04_b x_cat Ethernet Digiware LYCY-CY MASTER 24DC diris-dw_02_a x_cat Digiware C- diris-dw_02_b x_cat diris-dw_08_a x_cat Communication LYCY-CY Digiware C-2 Digiware U Digiware -x oltage diris-dw_0_a x_cat diris-dw_024_b x_cat OUT N diris-dw_04_a x_cat 2 N diris-dw_022_a x_cat diris-dw_05_b x_cat RJ diris-g_022_b x_cat Digiware -4x Digiware -6x 0 RJ9 for D-0 (self-supply and data) nputs Outputs diris-dw_06_b x_cat RJ diris-b_09_a x_cat RJ9 diris-dw_025_a x_cat NPUT 2 d.c.(ma max) COM 2 diris-dw_026_a x_cat OUTPUT 250 a.c.(a max) 2 2 diris-dw_022_a x_cat diris-dw_07_a x_cat RJ RJ diris-dw_022_a x_cat 22 Catalogue

4 s Associated current sensors arious types of current sensors can be connected to the Digiware: Solid TE, split-core TR, flexible TF current sensors. This range of sensors can be adapted to all types of new or existing installations. A rapid RJ2 connection makes wiring easy and reliable and prevents wiring errors. The Digiware automatically recognises the sensor size and type. This guarantees the overall accuracy of the Digiware + current sensor chain. For more information: see page 2. TE solid current sensors diris-t_00_a cat diris-t_00_a cat Digiware TR Split-core current sensors TF Flexible current sensors sensors TE / TR / TF diris-t_04_a cat diris-t_06_a cat diris-dw_025_a cat TE RJ2 TR Network and connection examples x Three-phase P - CTs ( three-phase load) L L2 L Three-phase P - CT ( three-phase balanced loads) L L2 L diris-dw_02_b x_cat 2 N diris-dw_0_b x_cat 2 N x Three phase + neutral P+N - 4CTs ( three-phase load + Neutral) L L2 L N Single-phase P+N-CT (4 single-phase loads) L N diris-dw_08_b x_cat 2 N + N diris-b_08_b x_cat 2 N Fuses 0.5 A gg / 0.5 A class CC. CT: sensors Load Catalogue

5 Dimensions Digiware D-50 Digiware U / C / -x / -6x Digiware -4x diris-dw_07_b x_cat U-xx C-x -x -6x diris-dw_06_b x_cat diris-dw_022_a x_cat Configuration Power consumption of devices Components Power supplied (W) Power consumption (W) P AC / DC 5 Cables 50 metre package.5 System interfaces Digiware D-x0 2 Digiware C- 0.8 oltage module Digiware U-xx 0.72 modules Digiware -x 0.52 Digiware -4x.25 Digiware -6x 0.7 Repeater Digiware C-2.5 Repeater When the power consumption is over 20 W or the distance exceeds 00 m, a Digiware C-2 repeater is required. n a Digiware system, maximum 2 repeaters can be used. Rules to set the maximum number of products on the The total power consumptions by the devices connected to the must not exceed the power supplied by the DC supply. The power supply must not exceed 20 W / 70 C or 27 W / 40 C. System configuration with P5 power supply (ref: ) providing 5 W System can include: display Digiware D-50 (2 W) voltage module Digiware U-xx (0.72 W) 50 meter cable (.5 W) and 20 current modules Digiware -x (20 x 0.52 = 0.4 W) Total power = 4.62 W or 9 current modules Digiware -4x (9 x.25 = 0.25 W) Total power = 4.45 W. System configuration with a DC power supply providing a maximum of 20 W System can include: display Digiware D-50 (2 W) voltage module Digiware U-xx (0.72 W) 50 meter cable (.5 W) and 0 current modules Digiware -x (0 x 0.52 = 5.6 W) Total power = 9.82 W or 4 current modules Digiware -4x (4 x.25 = 5.72 W) Total power = 9.97 W. 00 m max or max. 20 W power consumption 00 m max or max. 20 W power consumption diris-dw_09_c gb_cat Digiware D-x0 DC power supply U-xx -x C-2 -x -4x DC power supply -4x 24 Catalogue

6 Technical characteristics Electrical characteristics Digiware C- nput voltage DC ± 20 % - 20 W max Removable screw terminal, 2 positions, 0.2 to 2.5 mm² stranded or solid cable P5 power supply Characteristics: AC/ DC A - 5 W Modular format - Dimensions (H x L): 90 x 25 mm Measurement characteristics Energy and power Accuracy Active energy and active power Reactive energy accuracy nput consumption 0. A Permanent overload 00 AC Ph/N oltage accuracy Class 0.2 Removable screw terminal, 4 positions, 0.2 to 2.5 mm² stranded or solid cable - Digiware Number of current inputs -x: / -45 : 4 / -6x : 6 Associated current sensors Solid TE, split-core TR, flexible TF current sensors accuracy Class 0.2 Digiware alone Class 0.5 with TE or TF current sensors Class with TR current sensors Class 2 with TE, TR or TF current sensors Power factor Accuracy Class 0.5 with TE or TF current sensors Class with TR current sensors oltage - Digiware U Network characteristics measured 50-00AC (Ph/N) AC (Ph/Ph) - CAT Frequency range 45 65Hz Frequency accuracy Class 0.02 Network type Single-phase / Two-phase / Two-phase with neutral / Three-phase / Three-phase with neutral Measurement by voltage transformer Class 0.2 Digiware alone Class 0.5 with TE or TF current sensors Class with TR current sensors Specific SOCOMEC cable with RJ2 connectors nputs - Digiware -45 Number of inputs 2 Type / Non insulated input, internal polarisation 2 DC max, ma nput functions Logic status or pulse meter Removable screw terminal, 0.4 to.5 mm² stranded or solid cable Outputs - Digiware -45 Number of outputs 2 Relay type 20 AC ±5 % - A Configurable alarm (current, power, ) on threshold overruns or remote controlled status Primary: AC Secondary: 60, 00, 0, 7, 90 AC Removable screw terminal, 0.2 to 2.5 mm² stranded or solid cable Communication characteristics between Digiware modules Type of cable Specific SOCOMEC cable with connectors type 2 half duplex wires Protocol Modbus RTU Speed bauds Configuration and data transmission Location Single-point on Digiware C USB Protocol Modbus RTU over USB Configuration of Digiware U and modules Location On each Digiware U and measuring module B-type micro USB connector Mechanical characteristics Types of casing Casing degree of protection Front face degree of protection Environment characteristics Operating temperature C Storage temperature C Operating humidity Modular for DN-rail or back plate mounting P20 / K06 P40 (panel face with modular mounting) / K06 55 C / 97% relative humidity Operating altitude 2000 m Digiware D-40 / D-50 characteristics Mechanical characteristics Screen type Capacitive touch-screen technology, 0 keys Screen resolution 50 x 60 pixels Front face degree of protection P65 Communication Ethernet 0/00 Mbs Modbus TCP gateway function (D-50) Digiware Control and power supply interface function 2- wires Modbus RTU communication function (input D-50 / output D-40) USB Updating via B-type micro USB connector Electrical characteristics DC +0% / -20% Consumption 2 A Environment characteristics Storage temperature C Operating temperature C Humidity 95 % at 40 C nstallation category - degree of pollution CAT, 2 s Digiware D-40 Multi-point display - output D-50 Multi-point display - Ethernet output C- System interface C-2 Repeater U-0 Metering U-20 Monitoring U-0 Analysis Metering - current inputs Metering + load curve - current inputs Monitoring - current inputs Analysis - current inputs Monitoring 2 inputs / 2 outputs - 4 current inputs Analysis 2 inputs / 2 outputs - 4 current inputs Metering - 6 current inputs Metering + load curve - 6 current inputs P AC/ DC 5 W power supply Digiware connection cables 0.0 m length m length m length cables m length for BUS Digiware 2 m length m length m length m + 50 connectors Termination for (fitted on C- and D-50) USB configuration cable Single-point display D-0 () Single-point display for Digiware -4x () D-0 display characteristics Catalogue