Use of the application program
|
|
- Millicent Griffith
- 6 years ago
- Views:
Transcription
1 Use of the application program Product family: Product type: Manufacturer: with red LED cover with white LED cover Functional description Push button Push button, 4-fold Siemens Push button UP 212 titanium white /Ds 5WG AB11 Push button UP 212 light bronze /Ds 5WG AB61 Push button UP 217 titanium white /Df 5WG AB11 Push button UP 217 electric white /Df 5WG AB41 Push button UP 212 titanium white /Ds 5WG AB12 Push button UP 217 titanium white /Df 5WG AB12 Push button UP 217 electric white /Df 5WG AB42 The application program 12 S4 Dim, Shu,/off/toggle, Val presel makes it possible to assign the following functions to the 4-fold push button with preselection buttons: switching, shutter control, dimming, or preselection display via LEDs. An adjustable brightness value for example can also be recalled directly via the preselection buttons. The function Value preselection can also be used for other applications such as for servomotors or ventilation flaps. Preselection buttons It is possible to send adjustable 8 bit values immediately on operation via preselection buttons. If several preselection buttons are operated at the same time, a value that has been set for this push button combination is sent. Twelve push button combination values can be parameterised. Rocker The rocker can be used for switching, shutter control and cyclical dimming functions. Switch: When the rocker is pressed, the corresponding signal is sent (/Off/Toggle) with no distinction made between a long or short push button action. The signal is therefore already sent when the rocker is pressed. The distinction between whether an or Off signal is sent, is dependent on whether the upper or lower of the rocker has been pressed and which parameters have been assigned. If the rocker is set to Toggle mode, the rocker sends the inverse signal to that of the object after a short push button action. The object and the switch object should therefore be linked. Shutter: A distinction is made between a long and short push button action. After a brief operation of the rocker, a switching telegram is sent which adjusts the louvres or stops the movement of the shutters. After a long push button action, the shutter is either raised or lowered depending on the parameter settings. The distinction between whether an Up or Down command is sent, is dependent on the operation of the rocker (upper or lower ) and the parameter settings. When assigning parameters it is possible to choose Upper : Up, Lower : Down or vice versa. This parameter makes it possible to control skylights and security gates etc. in both directions. In this case the Up command corresponds to the Off command and the Down command corresponds to the command. Dimming: A distinction is made between a long and a short push button action. A brief operation of the rocker sends a corresponding switching command (, Off or Toggle). If the push button is pressed for a longer period (the duration of which can be set), a dimming command is sent. The functions of Dimming with stop telegram and Dimming with cyclical sending are available. If Dimming with stop telegram is selected, a long push button action sends a command to the dimming object to dim by 100%. When the rocker is released, a stop command is sent. Siemens AG , 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: /1
2 If Dimming with cyclical sending is selected, a dimming command is sent at set intervals for the duration of the push button action. It is also possible to assign parameters to the adjustment of the brightness value per dimming command (e.g. adjust by 1/8). LED display The first and third LED can be used for display or as an orientation light. In addition, if the operating mode 1 x dimming and 4 x value preselection is selected, all 4 LEDs are used for displaying the current preselection. Maximum number of group addresses: 8 Maximum number of associations: 9 Operating mode parameter 0 / Off Switch 1 Bit CWTU This object serves as a switching object for the rocker after a push button action. The default setting applies: pressing the upper sends an telegram while operation of the lower sends an Off telegram. If Toggle is selected, either an or an Off telegram is sent depending on the current switching state (toggling). 2 Preselection Value 1 Byte CWTU 3 Status (for LED Status 1 Bit CWU display) This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Switch parameter Operating mode 1 x dimming and 4 x value preselection 1 x shutter control and 4 x value preselection 1 x switching and 4 x value preselection The function of the rocker is defined via the Operating mode parameter, whereby the Value preselection function is not changed. The necessary objects appear in the object list depending on the parameter that has been assigned. The corresponding object types also change accordingly. Upper / Lower / Off Off / Toggle / Toggle This parameter defines the function of the upper and lower s. In the default setting, pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle/Toggle is selected, either an or an Off telegram is sent when the rocker is pressed, depending on the current object (toggling). Switch communication objects Shutter communication objects Technical Manual , 6 pages Siemens AG Update: Siemens AG 2002 Electrical Installation Technology /2
3 0 Open / Closed Louvres 1 Bit CWTU Dimming communication objects (with stop telegram) This object serves as a switching object for louvre adjustment after a short push button action. The following applies: pressing the upper opens the louvres by one step with an Off telegram while pressing the lower closes the louvres by one step with an telegram. 1 Up / Down Shutter 1 Bit CWTU This object is used as a switching object for movement of the shutters after a long push button. The following default setting applies: pressing the upper raises the shutters with an Off telegram while pressing the lower lowers the shutters with an telegram. A short push button action during shutter movement causes the shutter to stop. 3 Preselection Value 1 Byte CWTU Shutter parameters Upper / lower Shutter Up / Down Shutter Down / Up This parameter defines the function of the upper and lower rocker s. In the default setting, a brief operation of the upper opens the louvres by one step with an Off telegram. Pressing the lower closes the louvres by one step with an telegram. A long operation of the upper raises the shutters with an Off telegram while a long operation of the lower lowers the shutters with an telegram. Long switch operation min. 0.3; 0.4; 0.5 ; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. 0 / Off Dimming 1 Bit CWTU This object serves as a switching object for the rocker after a short push button action. The following applies in the default setting: pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle is selected, either an or Off telegram is sent dependent on the current switching state (toggling). 1 Brighter / Dimming 4 Bit CWTU Darker This object serves as a dimming object for the rocker after a long push button action. The following applies: a long operation of the upper rocker sends a Dim brighter telegram while a long operation of the lower rocker sends a Dim darker telegram. 2 Preselection Value 1 Byte CWTU 3 Switch Status (/Off) 1 Bit CWU This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Siemens AG , 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: /3
4 Dimming parameters (with stop telegram) Upper / lower Dimming / Off Dimming Toggle Dimming / Off cyclically Dimming cyclically toggle This parameter defines the function of the upper and lower rocker s. In the default setting, a short operation of the upper sends an telegram while a short operation of the lower sends an Off telegram. If a longer push button action is detected, pressing the upper sends a Dim brighter telegram while pressing the lower sends a Dim darker telegram. A Stop telegram is sent when the push button is released. If the setting Dimming toggle is selected, either an or an Off telegram is sent after a short push button action, depending on the current object (toggling). The dimming function is maintained as in the setting Dimming /Off. Long switch operation min. 0.3; 0.4; 0.5 ; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. 0 / off Dimming 1 Bit CWTU This object serves as a switching object for the rocker after a short push button action. The following applies in the default setting: pressing the upper sends an telegram while pressing the lower sends an Off telegram. If the setting Toggle is selected, either an or Off telegram is sent dependent on the current switching state (toggling). 1 Brighter / Dimming 4 Bit CWTU darker This object serves as a dimming object for the rocker after a long push button action. The following applies: a long operation of the upper rocker sends a Dim brighter telegram while a long operation of the lower rocker s sends a Dim darker telegram. 2 Preselection Value 1 Byte CWTU 3 Switch Status (/Off) 1 Bit CWU This object serves as a object and is only used for the receipt of switch signals. The object should be linked with the switch object of the dimming actuator. Dimming parameters (with cyclical sending) Dimming communication objects (with cyclical sending) Upper / lower Dimming / Off Dimming Toggle Dimming / Off cyclically Dimming cyclically toggle This parameter specifies the function of the upper and lower rocker s. In the default setting, a short operation of the upper sends an telegram while a short operation of the lower sends an Off telegram. If a long push button action is detected (see parameter Long switch operation ), Dim brighter are sent at set intervals (see parameter Interval for cyclical sending ) when the upper is pressed and Dim darker are sent when the lower is pressed until the push button is released. If the setting Dimming toggle is selected, either an or an Off telegram is sent after a short push button action, depending on the current object (toggling). The dimming function is maintained as in the setting Dimming on/off. Technical Manual , 6 pages Siemens AG Update: Siemens AG 2002 Electrical Installation Technology /4
5 Long switch operation min. 0.3; 0.4; 0.5; 0.6; 0.8; 1.0; This parameter defines the time limit for a short/long rocker operation. If a rocker is pressed for longer than the set duration, the software recognises this as a long push button action. Interval for cyclical sending 0.3; 0.4; 0.5; 0.6; 0.8; 1.0; This parameter specifies the transmission frequency for cyclical sending for a long push button action. When setting the interval for cyclical sending, the bus load should be taken into consideration. Long switch operation (for dimming with cyclical sending) adjust by 1/2 adjust by 1/4 adjust by 1/8 adjust by 1/16 adjust by 1/32 adjust by 1/64 adjust by 100% It is possible to define here the adjustment in the brightness value that a dimming telegram carries out when a long push button action is detected. If the setting adjust by 1/8 is selected, 8 dimming must be sent before the lighting is dimmed from 0% to 100%. Display parameter Left LED / centre LED Left LED off, centre LED off Left LED off, centre LED on Left LED on, centre LED off Left LED for, centre LED off Left LED for, centre LED on Left LED off, centre LED for Left LED on, centre LED for Left LED inv., centre LED off Left LED inv., centre LED on Left LED off, centre LED inv. Left LED on, centre LED inv. all LEDs for value preselection The left LED and the centre LED can be assigned the function of display or orientation light. The setting all LEDs for value preselection is only available if the operating mode 1 x dimming and 4 x value preselection has been selected. Preselection parameters Value on preselection A 51 Value on preselection B 102 Value on preselection C 153 Value on preselection D 204 Value on preselection A B 75 Value on preselection A C 101 Value on preselection A D 126 Value on preselection B C 127 Value on preselection B D 152 Value on preselection C D 179 This parameter sets the brightness value that is sent directly when a preselection button or combination of prelection buttons are pressed. The range covers the values 0 to 255 or 0 to 100%. Siemens AG , 6 pages Technical Manual Electrical Installation Technology Siemens AG 2002 Update: /5
6 Preselection 2 parameters 4. Configured for dimming with cyclical sending < < Value on preselection A B C 102 Wert on preselection A B D 128 The brightness value is entered here that is sent directly after pressing a combination of preselection buttons. The range covers the values 0 to 255 or 0 to 100%. Dimming object 5. Configured for value preselection Operation of preselection button -1/8-1/8-1/8 +1/8 +1/8 +1/8 +1/8 Off Timing diagrams: Examples of rockers 1. Configured for switch function: upper, lower Off Value object Value Value Off Value Off Off Off 2. Configured for shutter function: upper Up, lower Down Louvres object < Open < Closed Shutter object Down Up 3. Configured for dimming with stop telegram < < Off Dimming object Darker Stop Brighter Stop Technical Manual , 6 pages Siemens AG Update: Siemens AG 2002 Electrical Installation Technology /6
Use of the application program. Functional description. GAMMA instabus Application program description. March S1 rocker (BCU2)
Use of the application program Product family: Product type: Manufacturer: Push button Push button, 1-fold Siemens Name: Pushbutton UP 241, single, neutral DELTA profil Order-no.: 5WG1 241-2AB_1 Name:
More informationUse of the application program
2 Use of the application program Product family: Product type: Product type: Product type: Manufacturer: Push button 1-fold 2-fold 4-fold Siemens Name: Pushbutton UP 233, single with IR receiver DELTA
More informationCommunication objects. Use of the application program. Note. Functional description. Parameters General
Use of the application program Product family: Product type: Manufacturer: Input Binary input, 4-fold Siemens Name: Push button interface UP 220/03 Order no.: 5WG1 220-2AB03 Name: Push button interface
More informationEDIFICIOS INTELIGENTES Y MULTIMEDIA: DOMOTICA Y CABLEADO ESTRUCTURADO
EDIFICIOS INTELIGENTES Y MULTIMEDIA: DOMOTICA Y CABLEADO ESTRUCTURADO Hojas de Aplicaciones para los módulos domóticos de Siemens de las Prácticas 5 y 6 Producto Número Pedido Programa Aplicación Base
More informationFunctional description. Use of the application program. GAMMA instabus Application program description. June C0 Sensor Switch
Use of the application program Functional description Product family: Product type: Manufacturer: Push button Push button, 1 4 fold Siemens The touch sensors have one, two or four vertically arranged pairs
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order no.: Name: Order
More informationGVS K-BUS R KNX/EIB Push Button Sensor Contents 1. Summary
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Push Button Sensor User manual-ver. 1.1 CHKP-01/01.1.xx CHKP-02/01.1.xx CHKP-03/01.1.xx KNX/EIB Intelligent Installation Systems GVS K-BUS R
More informationUse of the application program. Contents overview. Gamma instabus Application program description. November 2016
Use of the application program Product family: Product type: Manufacturer: Application: Name: Description: Order no: Application: Name: Description: Order no: Lighting Dimmer Siemens Switch-/Dimming Actuator
More informationUse of the application program. Functional description. GAMMA instabus Application program description. April A4 Roller shutter switch
Use of the application program Product family: Product type: Manufacturer: Shutter Switch Siemens Name: Roller shutter switch N 523/03 Order no.: 5WG1 523-1AB03 Functional description Application The roller
More informationDin Rail 8 Input / 8 Output Module
Din Rail 8 Input / 8 Output Module IO88B02KNX Product Handbook Product: Din Rail 8 Input / 8 Output Module Order Code: IO88B02KNX 1/32 INDEX 1. General Introduction... 3 2. Product and functional overview...
More informationDin Rail Universal Module 8 inputs / 8 outputs IO88E01KNX
Din Rail Universal Module 8 inputs / 8 outputs IO88E01KNX Product Handbook Product Description: Din Rail Universal 8 in / 8 out Module Order Code: IO88E01KNX Document Version: 1.1 Date: 22/07/2011 1/64
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Output Controller Siemens UP 255/11 brightness controller or AP 255/12 brightness controller 5WG1 255-4AB11 or
More informationApplication program: description and examples
F a n C o i l U n i t C o n t r o l l e r F a n C o i l 4 9 5 5 1 Application program: description and examples Woertz AG Electrotechnical accessories, installation systems Hofackerstrasse 47, P.O. Box
More informationUse of the application program. Table of Contents. GAMMA instabus Application program description. April B0 CO Room Control Unit
Use of the application program Product family: Product type: Manufacturer: Displays Display and operating units Siemens AG Name Room control unit UP 227 DELTA i-system Order no.: Table of Contents 5WG1
More informationPush button UP 287, 4 - fold
Product DELTA profil DELTA style Push button 1-fold pearl grey 5WG1 241-2AB01 titanium white 5WG1 285-2AB11 titanium white 5WG1 241-2AB11 basalt black 5WG1 285-2AB21 anthracite 5WG1 241-2AB21 titanium
More informationBinary Inputs, 4 fold K-BUS R. User manual-ver. 1 CTBI-04/00.1. KNX/EIB Intelligent Installation Systems
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Binary Inputs, 4 fold User manual-ver. 1 CTBI-04/00.1 KNX/EIB Intelligent Installation Systems Contents 1. General-----------------------------------------------------------------------------------------------------------------
More informationK-BUS Binary Inputs. User manual-ver. 1
Guangzhou Video-Star Eletronnics Co.,Ltd. K-BUS Binary Inputs User manual-ver. 1 CHBI-04/00.1 Intelligent Installation Systems http://www.video-star.com.cn Contents 1. General -------------------------------------------------------------------------------------------------------------------------
More informationEAE KNX Room Control Unit Product Manual RCUXXYY
EAE KNX Room Control Unit Product Manual RCUXXYY RCU2018 RCU2016 RCU1212 RCU0808 RCU2000 RCU2000 RCU1200 RCU0800 Note: RCUXXYY where XX denotes the number of outputs and YY number of inputs. Index 1 General...
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Display Display units Siemens AG Name: Contouch Room Controller UP 204 Order no.: 5WG1 204-2AB11, titanium white, 5WG1 204-2AB21,
More informationProduct documentation
Product documentation Rotary sensor ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-2 04 kundencenter@jung.de www.jung.de Service Center Kupferstr.
More informationB.IQ push button comfort 1-4gang, Flush-mounted (Up) x, x, x, x
The B.IQ push-button comfort is plugged onto a flushmounted bus coupling unit (flush-mounted BCU). The push-buttons of the device can be programmed for the following functions: switching, dimming, blind/shutter
More informationMA /2015. User manual CU-DIN DRY 4-Z KNX EC
MA00652800 06/2015 User manual CU-DIN DRY 4-Z KNX EC10430381 TABLE OF CONTENTS 1 Description...3 2 Safety instructions...4 3 Product function...4 4 Hardware...5 4.1 Technical data... 5 4.2 Dimensional
More informationPhilips LightMaster. KNX Commissioning Guide
Philips LightMaster KNX Commissioning Guide Philips LightMaster Commissioning Guide version 1.0 Specifications subject to change without notice. Copyright 2012 Controls, Systems & Services, Philips Lighting,
More informationTechnical Manual MDT Glass push buttons
6/2014 Technical Manual MDT Glass push buttons BE GT0/GTT 4-fold/ 8-fold without Temperature sensor 4-fold/ 8-fold with Temperature sensor 1 Tel.: +49-2263-880 Fax: +49-2263-4588 E-Mail:knx@mdt.de www.mdt.de
More informationWater-protected surface-mounted push-button bus coupler Order No , , ,
KNX Product documentation Issue: 14.10.2014 629x2y2z Water-protected surface-mounted push-button bus coupler Contents KNX Product documentation 1 Product definition... 3 1.1 Product catalogue... 3 1.2...
More informationDin Rail 4 Output Module BO04A01KNX
Din Rail 4 Output Module BO04A01KNX Product Handbook Product Description: Din Rail 4 Output Module Order Code: BO04A01KNX Document Version: 1.1 Date: 28/01/2014 1/45 INDEX 1. General Introduction... 4
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Display Display units Siemens AG Name: Contouch Room Controller UP 204 Order no.: 5WG1 204-2AB11, titanium white, 5WG1 204-2AB21,
More informationDELTA profil wall switch, single UP 241/2 5WG AB_2
UP 241/2 5WG1 241-2AB_2 UP 241/3,with status LED 5WG1 241-2AB_3 UP 243/2 5WG1 243-2AB_2 UP 243/3,with status LED 5WG1 243-2AB_3 UP 245/2 5WG1 245-2AB_2 UP 245/3,with status LED 5WG1 245-2AB_3 UP 245/4,with
More informationPush-button, 1-gang. (switch/neutral position) Programming push-button LED. Programming push-button LED. Ref.-No.
Push-Button BCU -gang (switch/neutral position) 07.0 LED KNX push-button BCU, -gang 07.0 LED, -gang -gang push-button BCU is an interface between an integrated conventional push-button and the KNX. conventional
More informationTebis application software
5 Tebis application software SXB322AU V 1.x 2 inputs / 2-output module LED SXB344AU V 1.x 4 inputs / 4-output module LED Product reference Product designation TXB322AU TXB344AU Embedded module: 2 inputs
More informationB.IQ push button 3gang, Flush-mounted (Up) x
The application module for pushing onto the flush-mounting bus coupling unit. Depending on the user software can trigger switch actuators, or dim actuators or shutter actuators, and can also be used as
More informationApplication description. Motion detector KNX- BCU
Application description Motion detector KNX-BCU Electrical/mechanical data: see the operating instructions for the product Order number Product designation Application programme TP product Radio product
More informationDIN RAIL 12/8/4 OUTPUT MODULE. BOxxB01KNX. Product Handbook
DIN RAIL 12/8/4 OUTPUT MODULE BOxxB01KNX Product Handbook Product: BOxxB01KNX -BO12B01KNX -BO08B01KNX -BO04B01KNX Description: DIN RAIL 12/8/4 OUTPUT MODULE Document Version: 1.2 Date: 07/07/2015 1/16
More informationConfiguration example: Dimming in the ETS. 1 Introduction
Introduction Introduction: For the dimming function, in addition to brief pressing (switching bit), longer pressing (dimming 4bit) must be connected between the devices. The status display of the LED should
More informationSWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION
SWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION MODEL TYPE NO. SG HOKUSPOKUS KNX/KLR 25010 Program version 2.7 2012 M. Züblin AG Neue Winterthurerstrasse 30, 8304 Wallisellen, Switzerland The
More information1 Gang STD, 2 Gang STD, 3 Gang STD
1 Gang STD, 2 Gang STD, 3 Gang STD Reference Manual V 1.0 Page 1 of Contents 1 Functional characteristics... 3 2 Technical data... 3 3 Application programs... 4 3.1 Selection in the product database...
More informationKNX Communication. KNX Association
KNX Communication Table of Contents 1 Basic Method of Operation...3 2 Physical address...5 3 Group Address...6 4 Communication object...8 4.1 Flags...9 5 Useful Data of a TP1 telegram... 10 6 Standardized
More informationUse of the application program
Application program description Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Table of contents Physical sensors Presence detector Siemens OPTISENS ice 5WG1
More informationApplication description
Hersteller Berker Taster ETS Multifunktions-Tastsensor 1-4fach Application description 1-fold KNX multifunctional push-button 2-fold KNX multifunctional push-button 3-fold KNX multifunctional push-button
More informationRoom controller LS 990 / LS plus Stainless Steel / Aluminium
Room controller LS 990 / LS plus Stainless Steel / Aluminium 1 RCDES 2021 RCDES 2022 RCDES 2023 RCDES 2024 RCDES 2044 2 Ref.-No. KNX room controller display ETS-product family: Heating, ventilation, A/C
More informationTechnical Manual MDT Push Buttons
09/2013 Technical Manual MDT Push Buttons KNX RF+ RF TA55xx 2-fold/4-fold/6-fold/8-fold 2-fold/4-fold/6-fold/8-fold with actuator 1 MDT technologies GmbH,Geschäftsbereich Gebäudeautomation Tel.: +49-2263-880
More informationDELTA i-system wall switch single UP 221/2 5WG AB_2
DELTA i-system wall switch single UP 221/2 5WG1 221-2AB_2 UP 221/3,with status LED 5WG1 221-2AB_3 wall switch double UP 222/2, 5WG1 222-2AB_2 UP 222/3,with status LED 5WG1 222-2AB_3 wall switch triple
More informationOperating and Installation Instructions GePro Pushbutton KNX4 Frontlight- / Backlight 1 -KNX
Operating and Installation Instructions GePro Pushbutton KNX4 Frontlight- / Backlight 1 -KNX Email: info@knx-taster.de Internet: www.knx-taster.de Order code: Basic element KNX4 Order code: Plaster compensation
More informationPush-buttons 18. Light scenes push-buttons 21. Push-buttons with thermostat 22. Labelling ields 24
A wide array of alternative materials and colours have been added to the convenient variety of KNX functionality of the. Frameless KNX push-button with full-material rockers (glass, stainless steel and
More informationKNX/EIB Product documentation. Page 1 of 23. Order-No xx Order-No xx Order-No xx Order-No xx
KNX/EIB Product documentation Push button 1gang with labeling field Push button 2gang with labeling field Push button 3gang with labeling field Push button 4gang with labeling field Issue: 23.04.2009 655x0120
More informationApplication description
Manufacturer Berker Motion detector Application description KNX motion detector module comfort 1.10m KNX motion detector module comfort 2.20m ETS KNX motion detector module comfort 1.10m ETS KNX motion
More informationProduct documentation
Product documentation Standard push-button module with BCU, 4-gang ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 D-58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-1 89 E-mail: mail.info@jung.de
More informationKNX function and configuration
2 KNX function and configuration Introduction A presence detector monitors the detection zone for occupancy, and causes one or more actions to be executed when a person enters the detection area. In their
More informationProduct documentation
Product documentation Standard push-button module with BCU, 2-gang ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 D-58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-1 89 E-mail: mail.info@jung.de
More informationApplication description. KNX push-button 1gang. KNX push-button 2gang. KNX push-button 3gang. KNX push-button 4gang. Page 1/51
Application description KNX push-button 1, 2, 3 and 4gang Electrical/mechanical data: see the operating instructions for the product Order number Product designation Application programme TP product Radio
More information½ Caution! Introduction. Blind.switch 5701/1.0
Blind.switch 5701/1.0 Introduction General information This software application enables you to program blind/switch actuators using manual mode (referred to below as actuator), control blind and roller
More informationProduct documentation
Product documentation Signal panel ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 D-58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-1 89 E-mail: mail.info@jung.de Internet: www.jung.de
More informationApplication manual Wall mounting KNX Pushbuttons BASIC WL (Without Led) EK-E32-TP 2-4 rockers Series FF EK-E22-TP 1-4 rockers Series 71
Wall mounting KNX Pushbuttons BASIC WL (Without Led) EK-E32-TP 2-4 rockers Series FF EK-E22-TP 1-4 rockers Series 71 Summary 1 Scope of the document... 4 2 Product description... 5 2.1 Rocker functions...
More informationUse of the application program. Contents overview. GAMMA instabus Application program description. August 2012
Use of the application program Product family: Heating, Air conditioning, Ventilation Product type: Controller Manufacturer: Siemens Name Room Temperature Controller UP 237K Design: DELTA i-system Color
More informationOperation and installation manual KNX IO 511 (1O2I) Application. 1. Installation and Connection
EN Operation and installation manual KNX IO 511 (1O2I) (Art. # 5232) Switching actuator with 1 output and 2 binary inputs A. KNX Programming mode The KNX programming mode is activated/deactivated either
More informationProduct and Applications Description. Application programs. instabus EIB Technical Product Information. February 2012
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982201 The push button interface UP 220/31 is a binary input and output devices for installation
More informationContents. GAMMA instabus Application program - Descriptions. June B0 KNX / DALI Gateway Twin N 141/
Contents 1. Product description...2 1.1 DALI fundamentals...2 1.2 Gateway fundamentals...2 2. Functional overview...2 2.1 Modes... 3 2.1.1 Normal mode... 3 2.1.2 Standalone mode... 3 2.1.3 Direct mode...
More informationApplication description. KNX Push-button module 1gang. KNX Push-button module 2gang
Application description KNX Push-button module 1/2gang Electrical/mechanical data: see the operating instructions for the product Order number Product designation Application programme TP product Radio
More informationapplication software
application software application software RF input product Electrical / Mechanical characteristics: see product user manual Product reference Product designation TP device RF devices 8565 52 xx 8565 62
More informationTable of contents. Use of the application program. GAMMA instabus Application program description. July B CO IP Gateway KNX-BACnet
Table of contents Use of the application program... 1 1.Functional description... 2 Behavior at bus voltage failure / recovery... 4 Factory default state... 4 Behavior on unloading the application program...
More informationUsing the application program. Functional description. GAMMA instabus Application Program Description. October Event Module 800A06
Using the application program Product range: Product type: Manufacturer: Controllers Controllers Siemens Name: Event Module N 341 Order No.: 5WG1 341-1AB01 Functional description With the help of a special
More informationBinary Input Module 2, 4 or 6 Channels. Product Manual 2017 INTERRA
2, 4 or 6 Channels 2017 INTERRA Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility
More informationAPPLICATION MANUAL EK-CC2-TP EK-CD2-TP
APPLICATION MANUAL EK-CC2-TP EK-CD2-TP UNIVERSAL INTERFACE 2 4 DIN 2 _4 Out Led Pag. 1 Summary 1 Scope of the document...4 2 Product description...4 2.1 Input functions...5 2.2 Led Output...5 2.3 Connection
More informationApplication description for the KNX Roombox. (Art. no. ORBK8L0S4HW/ORBK8D0S4HW/ORBK4L4S4HW/ORBK4D4S4HW)
Application description for the KNX Roombox (Art. no. ORBK8L0S4HW/ORBK8D0S4HW/ORBK4L4S4HW/ORBK4D4S4HW) Introduction to the ORB plug-in... 1 Zone Global... 9 Zone Energy metering... 11 Push-button interface...
More informationKNX/EIB Intelligent Installation Systems
K-BUS R Shutter Actuator, 4fold User manual-ver. 1 AWBS-04/00.1 KNX/EIB Intelligent Installation Systems Conents 1. General ---------------------------------------------------------------------------------------------------------------------
More informationTechnical Manual MDT LED Controller
Stand 5/2017 Technical Manual MDT LED Controller AKD 0424V.01 AKD 0324V.01 AKD 0224V.01 AKD 0424VR.01 1 Content 1 Content... 2 2 Overview... 4 2.1 Overview Devices... 4 2.2 Structure & Handling... 5 2.3
More informationOperation and installation manual KNX IP Multi IO 580 (48I/O) Application. 2. Factory default settings. 1. Installation and connection ❹ ❼ ❻ ❷
EN ❶ Operation and installation manual KNX IP Multi IO 580 (48I/O) (Art. # 5238) KNX IP Multi IO with 48 configurable In- and Outputs ❸ ❹ ❼ ❺ ❽ ❻ ❷ ❶ ❶ ❶ Inputs and Outputs 1-48 ❷ LAN Connector ❸ OLED
More informationPRESENCE DETECTOR, CONSTANT LIGHT CONTROLLER PD00D01KNX. Product Handbook
PRESENCE DETECTOR, CONSTANT LIGHT CONTROLLER PD00D01KNX Product Handbook Product: PD00D01KNX Description: PRESENCE DETECTOR, CONSTANT CONTROLLER Document Version: 1.3 Date: 03/10/2017 Tribunale di Mila
More informationIntroduction of Configure Software for 3.5'' Touch Panel
Introduction of Configure Software for 3.5'' Touch Panel 1. Brief Introduction This Configure Software is used with the 3.5'' Touch Panel. After setting group address of different devices in ETS users
More informationDELTA i system wall switch single UP 221/2 5WG DB_2. wall switch double UP 222/2, 5WG DB_2. wall switch triple UP 223/2, 5WG DB_2
DELTA i system wall switch single UP 221/2 5WG1 221 2DB_2 UP 221/3,with status LED 5WG1 221 2DB_3 wall switch double UP 222/2, 5WG1 222 2DB_2 UP 222/3,with status LED 5WG1 222 2DB_3 wall switch triple
More informationGAMMA instabus Application Program Description. July CO Colour Touch-Panel
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Name: Order no.: Display Display units Siemens UP 588/12 Colour Touch Panel UP 588/13 Colour Touch Panel (AC
More informationPush button sensor 3 design. 1 Introduction
1 Introduction Introduction: The push button sensor 3 is the operating unit on site in the wall, which makes it the operating unit which is always available to the user. It can be assigned different variants
More informationR oom C ontroller K -B U S. U ser m anual-v er.2.1 AMRM-41/00.1. KNX/EIB Intelligent Installation Systems
Guangzhou Video-star Electronics Industrial Co., Ltd R R oom C ontroller K -B U S U ser m anual-v er.2.1 AMRM-41/00.1 Intelligent Installation Systems www.video-star.com.cn marketing@video-star.com.cn
More informationTechnical Manual MDT Universal Interfaces
10/2017 Technical Manual MDT Universal Interfaces BE 02001.01 BE 04001.01 BE 06001.01 1 1 Content 1 Content... 2 2 Overview... 4 2.1 Overview devices... 4 2.2 Exemplary circuit diagrams... 4 2.3 Usage
More informationEIB/KNX ENO Radio bus interface (32-channel)
EIB/KNX ENO Radio bus interface (32-channel) Interface between EnOcean and EIB/KNX, on-wall mounting (Quelle: EIBMARKT GmbH, Reference No.: N000406) Page 1 Application EIB/KNX ENO Radio bus interface acts
More informationTechnical Manual MDT Glass push buttons
04/2014 Technical Manual MDT Glass push buttons KNX RF+ RF GT0/GTT 4-fold/ 8-fold with switching actuator 4-fold/ 8-fold with switching actuator and temperature sensor 1 MDT technologies GmbH,Geschäftsbereich
More informationContent 1 Generally Installation...3
Content 1 Generally...2 2 Installation...3 2.1 ETS App...3 2.2 Documentation and sample project...3 3 User interface...4 4 XLSX-Excel-Template...5 4.1 General...5 4.2 Mass operation...5 4.3 Errors during
More informationK-BUS Shutter Actuator. User manual-ver. 1
Guangzhou Video-Star Eletronnics Co.,Ltd. K-BUS Shutter Actuator User manual-ver. 1 AWBS-04/00.1 Intelligent Installation Systems http://www.video-star.com.cn Conents 1. General ---------------------------------------------------------------------------------------------------------------------
More informationVerwendung des Applikationsprogramms. 1. Function overview. GAMMA instabus Application program description. September 2010
Verwendung des Applikationsprogramms Product family: Product type: Manufacturer: Physical Sensors Weather station w/ integrated sensors Siemens Name: Weather station WS1 (GPS) AP 257/32 Order no.: 5WG1
More informationRev KNX Technical Reference Manual ABB i-bus KNX. KNX Sensors
0073-1-7704 Rev. 01 04.2011 KNX Technical Reference Manual ABB i-bus KNX KNX Sensors KNX Technical Reference Manual ABB i-bus KNX 1 Quick-Start-Guide Additional key Set value minus (1) Set value plus (2)
More informationTechnische Daten: instabus EIB supply instabus line: YY 6 x 0.6 mm; red: bus (+) / black: bus (-)
Product designation: shutter/blind actuator 1fold FM Design: FM (flush-mounted type) Article no.: 1047 00 ETS search path: Gira Giersiepen / shutter / shutter / shutter/blind actuator 1fold FM Functional
More informationTechnical Manual MDT Glass Push Button II Smart
State 10/2017 Version 1.0 Technical Manual MDT Glass Push Button II Smart BE-GT20W.01 BE-GT20S.01 BE-GT2TW.01 BE-GT2TS.01 1 Content 1 Content... 2 2 Overview... 4 2.1 Overview devices... 4 2.1.1 Special
More informationTebis application software
Tebis application software 6-fold switch actuator 16A 230V current monitoring Electrical/Mechanical characteristics: See product user manual A faire Product reference Product designation Application software
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Table of contents Communication Interface Siemens IP Gateway KN-BACnet N 143 5WG1 143-1AB01 1. Functional description...
More informationMathematical Operations
Mathematical Operations ThinKnx Configurator 1 Index Mathematical Operations in the Configurator...3 Combination...4 Inputs configuration...6 Example: turn on and off the boiler...7 Example: activation
More informationPush Button Interface UP 220D31
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982203 The push button interface is a binary input and output devices for installation in in-wall
More informationProduct documentation. KNX Blind Act.FM w.3 Inputs Art.-No. MTN
Product documentation KNX Blind Act.FM w.3 Inputs Issue: 22.12.2010 KNX Product documentation Contents 1 Product definition... 3 1.1 Product catalogue... 3 1.2 Function... 3 2 Installation, electrical
More informationTechnical Documentation Intensity
Intensity Status: Draft Firmware Version : v1.4 Hardware Version : Intensity Snr. 140505 / 140203 Order Number: INTXXX Technical Details: Power Supply Maximum Power Consumption Bus Power Consumption Fan-In
More informationAfterwards, you will connect the scene function to the group addresses from the existing project.
Introduction Introduction: The scene function is supported in the ETS with the parameters of the push button sensors and actuators. In doing so, the device functions act together with the abilities of
More informationKNX S-B2-UP. Actuator for 230 V or 24 V. Installation and Adjustment
EN KNX S-B2-UP Actuator for 230 V or 24 V Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical data... 3 1.2. Structure... 4 1.2.1. Structure 230 V AC version... 4 1.2.2. Structure
More informationDELTA style 6/1. 6/6 Introduction. 6/7 Frames. 6/8 Switches and pushbuttons. 6/14 Socket outlets. 6/16 International plug-and-socket devices
/ Introduction /7 Frames /8 Switches and pushbuttons /14 Socket outlets /1 International plug-and-socket devices /17 Shutter/blind controls /21 Lighting controls /24 Motion detectors /2 Room temperature
More informationKNX S-B4T-UP. Actuator for 230 V or 24 V. Installation and Adjustment
EN KNX S-B4T-UP Actuator for 230 V or 24 V Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical data... 3 1.2. Structure... 4 1.2.1. Structure 230 V AC version... 4 1.2.2. Strucure
More informationControl unit for lux control, MDRC Type: SL/S 50.1, GH Q R0001
SK 0012 B 98 The control unit is a DIN rail mounted device for insertion in the distribution board. It is used to control digitally dimmable electronic ballast devices or transformers via the EIB. In a
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Output Binary Siemens Name: Switching Actuator N 53/ Order no.: 5WG 53-AB Name: Switching Actuator N 52/ Order no.: 5WG 52-AB
More informationMTN MTN
KNX KNX Multitouch Pro Multitouch with RTCU 1920/1.1 Application description This document describes the software application 1920/1.1. The software application is designed to program the KNX Multitouch
More informationDALI Switch Cross. Datasheet. Multifunctional Switch Module. DALI control unit with four programmable momentary switches
DALI Switch Cross Datasheet Multifunctional Switch Module DALI control unit with four programmable momentary switches Art. Nr. 86459793 (white) Art. Nr. 86459529 (black) subject to change, Information
More informationGAMMA instabus Application Program Description. November CO Touch-Panel
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Name: Order no.: Display Display units Siemens UP 588/2 Colour Touch Panel (AC 230 V) 5WG 588-2AB2 UP 588/22
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationIn the following learning unit, you will simulate parameterising the heating function in the ETS.
Introduction Introduction: Heating control plays an important role in building technology. The most energy is consumed in heating buildings. With intelligent control, the effort is reduced while the level
More informationABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M. Product Manual. Intelligent Installation Systems ABB
Product Manual ABB i-bus EIB / KNX Shutter Actuator with Manual Operation, 4-fold, SMI, MDRC JA/S 4.SMI.1M Intelligent Installation Systems ABB JA/S 4.SMI.1M Shutter Actuator with Manual Operation, 4-fold,
More information