MAP-200 Power Meter Detector Adaptors
|
|
- Arron Mathews
- 6 years ago
- Views:
Transcription
1 Selection Guide MAP-200 Power Meter Detector Adaptors VIAVI Solutions AC Detector Adaptors are designed for use with the VIAVI MAP-200 optical power meters (mopm), return loss meters (morl) and Swept Wavelength System (msws); the Optical Component Evironmental Test System (OCETS); and legacy JDSU product lines. The AC900 series detector adaptors feature a pin for improved measurement precision. They can be used with all current mopm, morl, and msws detectors, as well as legacy JDSU C-Series instruments. AC100 series adaptors are thread-on adaptors without the pin of the AC900 series. These adaptors are compatible with all current mopm, morl, and msws detectors, as well as legacy JDSU MAP power meter, return loss meter, and SWS detectors. For more information about detector compatibility, or if you need an adaptor not listed, contact the Technical Assistance Center (TAC) for support: support@viavisolutions.com
2 Single-Fiber Connector Adaptors Detector adaptors for use with most common singlefiber ferrule connectors. These adaptors have pins and are compatible with all current MAP-200 mopm, morl, and msws detectors. Single-Fiber Ferrule Adaptors Detector adaptors for use with most common singlefiber ferrules. These adaptors do not have pins and are compatible with all current and legacy detectors. Magnetic quick fit AC900 blanking cap 2.5mm ferrule adaptor, AC116 non- FC adaptor, AC mm ferrule adaptor and LC non- AC116L SC adaptor, AC mm ferrule adaptor, non- AC123 LC adaptor, AC918 2mm ferrule adaptor, non- AC135 LC Duplex adaptor, AC918D 2 Detector Adaptors Selection Guide
3 Multi-Fiber Connector Adaptors Detector adaptors for use with most common multifiber ferrule connectors. These adaptors have pins and are compatible with all current MAP-200 mopm, morl, and msws detectors. A VIAVI integrating sphere is required for use with these adaptors. Bare-Fiber Adaptors Detector adaptors for use with bare fiber (single or ribbon). The fiber adaptor fits inside the holder, which is attached to the detector. A VIAVI integrating sphere is not required but is recommended for use with these adaptors. Description MT ferrule adaptor universal 12x6 and 16x4 array, Part Number AC912P Image Single-fiber adaptor, non- (one AC920 included) AC121 Ribbon-fiber adaptor, up to 12 fibers, non- AC113 MPO adaptor center keyed 12x6 and 16x4 array, AC917P MPO adaptor offset keyed 12x6 and 16x4 array, AC917Q Ribbon-fiber adaptor, up to 16 fibers, (one AC920 included) AC913 MPO adaptor universal keyed 12x6 and 16x4 array, MXC adaptor 16x4 array, AC917U AC924P Adaptor for Fujikura Splice Chuck (requires chuck holder from Fujikura not included) Replacement holder for bare-fiber adaptors AC121 and AC113, non- AC134 AC120 Replacement holder for bare-fiber adaptor AC913P. Also suitable for bare-fiber adaptor AC121 and AC113, AC920 3 Detector Adaptors Selection Guide
4 Integrating Spheres Integrating sphere for multi-fiber connectors optimized for SM APC and 12x6 and 16x4 array, Integrating sphere for multi-fiber connectors up to 12 and 16 fiber arrays, AC991P AC990P Replacement Bulkhead Adaptors Ordered as mating sleeves, these adaptors can be separated into two halves and used to replace worn connector bulkhead adaptors on MAP modules. FC/PC to FC/PC 2.15mm keyway AC500 (Not recommended for new designs) Single-fiber, high-power integrating sphere, 1mm aperture, non- AC330 FC/PC to SC/PC 2.15mm keyway FC/APC to FC/APC 2.05mm keyway AC501 AC502 Replacement Parts for AC900 Series MPO Detector Adaptors Inserts for MPO detector adaptors. Comes with five pieces of each key type: Center, Offset and Universal, as well as instructions for installation. FC/APC to SC/APC 2.05mm keyway AC503 Internal connector inserts for AC917/ AC917P, AC917Q, AC917U, 5 pieces of each type ACRI917 4 Detector Adaptors Selection Guide
5 AC100 Series Legacy Single-Fiber Connector Adaptors Detector adaptors for use with most common single-fiber ferrule connectors. These adaptors do not have pins and are compatible with all current and legacy detectors. Blank cap, non- AC100 MU adaptor, non AC114 FC adaptor, non- AC101 E2000 adaptor, non AC115 ST adaptor, non- AC102 LC adaptor, non- AC118 SC adaptor, non- AC103 MT-RJ adaptor, non- AC119 VIAVI Solutions Contact Us GO VIAVI ( ) To reach the VIAVI office nearest you, visit viavisolutions.com/contacts VIAVI Solutions Inc. Product specifications and descriptions in this document are subject to change without notice. Map-200-sg-lab-nse-ae viavisolutions.com
Fiber Inspection Tips and Adapters
Selection Guide Fiber Inspection Tips and Adapters VIAVI Solutions VIAVI Solutions offers a wide variety of fiber inspection tips and adapters to help you Inspect Before You Connect and work clean. Browse
More informationMAP-200-Based Insertion Loss/ Return Loss Testing Solution
MAP-200-Based Insertion Loss/ Return Loss Testing Solution morl/mil with PCT Application Environment Optical connectivity solutions (optical connectors, structured cabling, splitters, and the enclosures
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE FIBER OPTIC ATTENUATOR Fixed plug-in type TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fixed plug in type Attenuator Fixed plug in fiber
More informationFC Type Connector. Standards YD/T IEC GR-326-CORE
FC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts,
More informationVIAVI SmartClass OLA-55M
Data Sheet VIAVI SmartClass OLA-55M Optical Level Attenuator VIAVI Solutions VIAVI SmartClass optical handhelds go beyond the basics With more than 100,000 optical handhelds already in use, VIAVI continues
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
More informationVIAVI. OLA-54 and OLA-55. SmartClass. Data Sheet. Optical Level Attenuator. VIAVI SmartClass optical handhelds go beyond the basics.
Data Sheet VIAVI TM SmartClass Optical Level Attenuator OLA-54 and OLA-55 VIAVI Solutions VIAVI SmartClass optical handhelds go beyond the basics With more than 100,000 optical handhelds already in use,
More information1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
More informationTest Port Adapters Reference Guide
Test Port Adapters Reference Guide TEST AND INSPECTION OTDRs Certification Test Kits Fiberscopes Loss Test Sets überreicht durch: Opternus GmbH Optische Spleiss- & Messtechnik Büro Süd: Bahnhofstr. 5 D-22941
More informationMAP Insertion Loss/Return Loss Meter (morl-a1 with PCT Automation Software)
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS MAP Insertion Loss/Return Loss Meter (morl-a1 with PCT Automation Software) Key Features Mandrel-free optical return loss measurements on fiber-optic patch-cords
More informationStandard-Area Silicon PIN Photodiodes (500µm)
Standard-Area PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages. The semiconductors offered are of proven manufacture and design. Our Silicon devices
More informationTransceiver Fiber Inspection and Cleaning
Application Note Transceiver Fiber Inspection and Cleaning VIAVI Solutions Introduction This document provides basic overview and background information for transceiver types that are commonly used in
More informationLEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE BARE FIBER ADAPTER TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Bare Fiber Adapter Bare fiber adapters are used as the medium to link the
More informationSingle Stage Isolator
Single Stage Isolator 1.Description: Single stage isolator is a kind of the optical passive device, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
More informationFIP Tip Adapter Quick Guide
FIP Tip Adapter Quick Guide For FIP-400 and FIP-400B Fiber Inspection Probes Optische Spleiss- & Messtechnik Büro Süd: PATCHCORD TIPS / BULKHEAD ADAPTERS / APC AND UPC / SINGLE FIBER / MULTIFIBER Most
More informationFIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
More informationDual Stage Isolator. 1.Description:
Dual Stage Isolator 1.Description: Dual stage isolator is a kind of the optical component, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
More informationConnectors Adapters Pigtail & Patch Cord...4-9
Connectors...4-1 Adapters... 4-6 Pigtail & Patch Cord...4-9 4-1 Connectors SC connector assembly instruction 4-2 Connectors FOCSC Fiber optical connector FOCSC-MC3BPB101 FOCSC-SA3YP9101 FOCSC-MC0BP9101
More informationKRONE FiberPLUS Patchcords and Pigtails. Optical fibres with connectors. Ultra-PC Ultra-PC Polishing P olishing
KRONE FiberPLUS Patchcords and Pigtails now now available av ailable with with Optical fibres with connectors Ultra-PC Ultra-PC Polishing P olishing SC-SM types of polishing: PC, UPC, APC8, APC 9 PC, UPC:
More informationTip Adapter Guide. The largest range of tip adapters in the industry to match any connector, in all settings possible.
Tip Adapter Guide For the ConnectorMax Fiber Inspection Probe The largest range of tip s in the industry to match any connector, in all settings possible. PATCHCORD TIPS / BULKHEAD ADAPTERS / APC AND UPC
More informationProduct Catalog Fiberoptic Instrumentation
Product Catalog Fiberoptic Instrumentation optical switches JGR cable assembly test system accessories repair and calibration Table of Contents INTRODUCTION Corporate Overview. 4 PRODUCTS OPTICAL SWITCHES
More informationAgilent Lightwave Solution Platform
Agilent Lightwave Solution Platform Configuration Guide May 2005 This guide provides configuration details for the Agilent 816xB family of mainframes and modules, including options and accessories. 8163B
More informationSPECIALIZED FIBER OPTIC ENDFACE TESTING
SPECIALIZED FIBER OPTIC ENDFACE TESTING PRODUCTS // ACCESSORIES FiBO APPLICATIONS Fiber Optic Connector and Termini Testing Aerospace & military vehicles on location inspection NIST/ISO traceable testing
More informationMPO LGX Cassette Module
DATASHEET Product updated on November 19, 2018 MPO LGX Cassette Module MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO
More informationSPECIALIZED FIBER OPTIC ENDFACE TESTING
SPECIALIZED FIBER OPTIC ENDFACE TESTING PRODUCTS // ACCESSORIES FiBO APPLICATIONS Fiber Optic Connector and Termini Testing Aerospace & military vehicles on location inspection NIST/ISO traceable testing
More informationLightBend TM Dual 2x2 Bypass Multimode Fiberoptic Switch
(Bidirectional) (Protected by U.S. patent 6823102 and pending patents) Features Low Optical Distortions 8 Ports Integration High Isolation High Reliability Fail-Safe Latching Epoxy-Free Optical Path Low
More information003 Cords & Cables With Optical Connectors
I : Optical Connectors 002 Connectors NMulti-fiber optical connector NField installable optical connector NBackplane connector NMechanical splices NMulti-fiber connectorized cords NConnectorized optical
More informationPOL-001 Fiber-Optic In-Line Polarizer. Operation Manual
POL-001 Fiber-Optic In-Line Polarizer Operation Manual Feb. 18, 2002 General Photonics Corp. Ph: (909) 590-5473 5228 Edison Ave. Fax: (909) 902-5536 Chino, CA 91710 USA www.generalphotonics.com Document
More informationConnectorized Aspheric Fiber Optic Collimators
Connectorized Aspheric Fiber Optic Collimators Diffraction limited performance Rugged stainless steel housing Pre-aligned for popular wavelengths Connectorized for quick assembly Threaded exterior for
More informationPATCH-CORD. SC Patch-Cord APPLICATIONS AVAILABILITY FEATURES SPECIFICATIONS. Active device termination Local Area Networks (LANs)
SC Patch-Cord APPLICATIONS CATV Metro Test equipment Active device termination Local Area Networks (LANs) Premise installations Telecommunicatio n networks Data processing networks Wide Area Networks (WANs)
More informationME8800 Optispec In Fixture Inspection System
Inspection Micro Enterprises Systems Inspection Systems ME8800 Optispec In Fixture Inspection System The Optispec ME8800 series of video microscopes were designed to speed up inspection of fiber optic
More informationI-Stop Probe. Application Note. What is the I-Stop probe? I-Stop Specifications. How to use the I-Stop probe. VIAVI Solutions
Application Note I-Stop Probe VIAVI Solutions What is the I-Stop probe? The I-Stop probe is a device designed to fit into the KS port of hardline equipment allowing a CATV field technician to utilize the
More informationOrdering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters
Page 1 of 9 Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters This document provides assistance with the selection of single-mode
More informationFP front panel. Features: Modular design 1U or 2U version Connector panels or brush entry
FP front panel The FP front panel introduces a low cost solution for fiber optic cable termination. The modular design can accept wide range of optical fibers capacity with various connector types. Modular
More informationState-of-the-Art and direction for high density optical fiber interconnects
State-of-the-Art and direction for high density optical fiber interconnects Bill Blubaugh, Toshiaki Satake US Conec Ltd. April 18, 2007 We develop, manufacture and market high density optical interconnect
More informationFIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW Engineered by Imagination Suncall Corporation was established in 1943 based on the principles of emphasizing function and precision. We strive to continually
More informationA Division of Castle Microwave. Fibre Products.
A Division of Castle Microwave Fibre Products www.castlemicrowave.com www.castlecables.co.uk Interconnect Products Global No 1 supplier in quantity for LC Product. Standard Connectors & Adapters Small
More informationCable Assembly Test System. MS12001 System
Cable Assembly Test System KEY FEATURES MS10P is a powerful controller unit with 10 slots MS10E Expansion Chassis for up to 10 extra slots Remote control via Ethernet/GPIB card Turn-key software Local
More informationLightMUX. Passive Optical Networking
PORTFOLIO OVERVIEW LightMUX LightMUX Passive Optical Networking Optelian FTTx/PON splitters and wavelength division multiplexers (WDMs) make the distribution of triple-play (voice, data, and video) traffic
More informationMPO LGX Cassette Module
DATASHEET Product updated on March 13, 2018 MPO LGX Cassette Module MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO backbones
More informationVISIBLE FIBER OPTIC FAULT LOCATOR
VISIBLE FIBER OPTIC FAULT LOCATOR Features: High visibility (up to 6 km with a 1 mw, 635 nm source) Higher output up to 30 mw, non-contact style power versions available Continuous light or pulse modulation
More informationOPTICAL CONNECTOR CONTAMINATION
OPTICAL CONNECTOR CONTAMINATION 6 What do the standards say? The test procedures specified by 568-C require tools and procedures for ensuring connector quality. End faces on cords and trunks shall be in
More informationEssentials of Fiber to the Antenna: Fiber Inspection and Connectivity
Solution Brief Essentials of Fiber to the Antenna: Fiber Inspection and Connectivity VIAVI Solutions 1 Fiber Inspection and Connectivity 3 Fronthaul Installation Test 2 Cable and Antenna Testing 4 Fiber
More informationTesting Parallel Optics
White Paper Testing Parallel Optics Author: Ed Gastle VIAVI Solutions To accommodate the relentless need for speed, driven by mobile devices, watching videos online and uploading and sharing content, network
More informationSPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
More informationCloset Connector Housing Panels (CCH-CP) A LANscape Solutions Product
Applications The panels are used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the piece of interconnect hardware Provides
More informationCONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
More informationAdvances in Fiber Tier 2 Enterprise & Data Center Testing
Advances in Fiber Tier 2 Enterprise & Data Center Testing As the volume of fibers deployed into enterprise increases significantly, fiber cabling advances like multi-fiber (MPO) connectors and interfaces
More informationDetectors for Fiber Optics: InGaAs PIN Photodiodes
PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages, of proven manufacture and design. Our InGaAs devices are optimal from 1100 to 1650nm, and are available
More informationAutofocus Video Inspection Probe G0382A. Product Introduction
focus Video Inspection Probe G0382A Product Introduction What is Video Inspection Probe? Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality.
More informationIQS-12001B CABLE ASSEMBLY AND COMPONENT TEST SYSTEM. Telecom Test and Measurement
CABLE ASSEMBLY AND COMPONENT TEST SYSTEM IQS-12001B R&D AND MANUFACTURG OPTICAL Provides the most accurate insertion loss and reflectance measurements on the market for components and cable assemblies
More informationSpecialized Solutions for Fiber Optic Testing
Specialized Solutions for Fiber Optic Testing www.optotest.com 1.805.987.1700 OP740 High-Speed Multichannel Optical Power Meter The OP740 offers a state-of-the-art solution for highspeed optical power
More informationOLS-55/56 Sm a r t Optical Laser Source A Sm a r t, Future-Proof Optical Laser Source
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS /56 Sm a r t Optical Laser Source A Sm a r t, Future-Proof Optical Laser Source Key features New Laser source with up to four wavelengths offers flexibility
More informationIntroduction to optical fibers and their applications
Introduction to optical fibers and their applications Felix Donkers Oct, 2008 (draft v0.1) Outline Introduction Optical fibers, patch cords and cables Optical fiber termination and alignment Application
More informationLTK-400 Series Optical Sources, Meters and Kits Without Data Storage Capabilities
Features and Benefits High output power and calibrated wavelengths Easy to use, unparalleled performance Rugged handheld design Capable of enduring harsh testing environments Product warranty and calibration
More informationProduct Catalog Fiberoptic Instrumentation JGR
Product Catalog Fiberoptic Instrumentation JGR Table of Contents INTRODUCTION Corporate Overview. 4 PRODUCTS TUNABLE LASERS TLS Tunable Laser Source. 5 USB MAINFRAME UM08 USB Mainframe.. 7 UM05 Optical
More informationMAX-FIP INSPECTION PROBE KEY FEATURES TEST SET KEY FEATURES COMPLEMENTARY PRODUCTS SPEC SHEET INTELLIGENT CONNECTOR AND FIBER CERTIFIER
INTELLIGENT CONNECTOR AND FIBER CERTIFIER 2014 GLOBAL PORTABLE FIBER OPTIC TEST EQUIPMENT MARKET LEADERSHIP AWARD ANALYSIS SOFTWARE Feature(s) of this product is/are protected by US design patents D710222
More informationPIONEER GOODS COMMUNICATION CO.,LIMITED
PIONEER GOODS COMMUNICATION CO.,LIMITED PRODUCTS LIST PG201501 1.FIBER OPITC TESTING EQUIPMENTS PG-OLS200 dual wavelength laser source Wavelength: 1310/1550 (others specify on requests, Max wavelength
More informationINTERCONNECT CATALOGUE
INTERCONNECT CATALOGUE SENKO Advanced Components is a recognized leader in the design, manufacturing, sales, marketing and distribution of over 1000 fiber optic products for the global telecom and datacom
More informationPM-800 Optical Power Meter INSTRUCTION MANUAL
PM-800 Optical Power Meter INSTRUCTION MANUAL is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s., Cerveny
More informationFiber Optic System. Fiber Optic System. Fiber Optic Rack Mount Solutions
Table of Contents Fiber Optic Plug and Play Cassettes 10 Gig Plug and Play Cassettes................. 71 LC Plug and Play Cassettes.................... 71 SC Plug and Play Cassettes....................
More informationDIAMOND Fiber Optic Components
DIAMOND Optic Components NETWORK ACCESSORIES Attenuators Family PC/APC MULTIMODE PC DESCRIPTION Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.
More informationFIBER PIGTAILED ULTRA STABLE LASER MODULE OZ-1000, OZ-2000 & OZ-3000 SERIES. Preliminary
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-41 Tel:(613) 831-0981 Fax:(613) 836-089 E-mail: sales@ozoptics.com FIBER PIGTAILED ULTRA STABLE LASER MODULE OZ-00, OZ-2000 & OZ-3000
More informationDatasheet. Fiber Optic Modular Patch Panel Features
Features Very high density, supports up to 24 duplex LC adapters (48 fibers), MT-RJ adapters (48 fibers) and simplex SC adapters (24 fibers) in 1U of rack space Pullout drawer enables ease of access to
More informationZX-1 Array Plus Zoom Interferometer
ZX-1 Array Plus Zoom Interferometer Key Benefits: Single unit can measure multi-fibre MT, Mini-MT, MT-RJ, MPO, MPX and MTP array connectors AND single-fibre PC, APC connectors, ferrules and ferrule blanks
More informationAdrian Young Leviton Network Solutions
Adrian Young Leviton Network Solutions In This Session Multimode fiber types How many fibers do I need for my application? Future IEEE and non IEEE applications Will my existing fiber plant support these?
More informationOLP-55 Sm a r t Optical Power Meter A Sm a r t, Future-Proof Optical Power Meter
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS OLP-55 Sm a r t Optical Power Meter A Sm a r t, Future-Proof Optical Power Meter Key features Industry s first auto-zeroing function provides outstanding accuracy
More informationSmartPocket Optical Power Meter OLP-34/35/38
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS SmartPocket Optical Power Meter OLP-34/35/38 Key features Cost-effective, rugged and high performance solution 3 year recalibration period Universal wavelength
More informationRack Mounted Products
SRS4000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19 / ETSI / ANSI racks,
More informationNon-Contact MPO Fiber Optic Connector
White Paper Non-Contact MPO Fiber Optic Connector Traditional MPO connectors require all fiber end faces to be in close physical contact at the same time. This is because of the fact that if there is an
More informationMaintenance and Troubleshooting of a PON Network with an OTDR
Application Note VIAVI Solutions Maintenance and Troubleshooting of a PON Network with an Troubleshooting a faulty passive optical point-to-multipoint network (PON) can be more complex than a point-to-point
More informationOptical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
More informationNetwork System. https://www.indiamart.com/network-systems/
+91-8071804703 Network System https://www.indiamart.com/network-systems/ We are amongst the Leading Manufacturers and Suppliers of wide range of Fiber Optic Patch Cables, Adapter, Pigtails, Attenuators,
More informationWhite Paper. FASTConnect or FUSEConnect Which Should You Choose? ABSTRACT INTRODUCTION. Tom Jeffers, Associate Product Manager, AFL
FASTConnect or FUSEConnect Which Should You Choose? Tom Jeffers, Associate Product Manager, AFL ABSTRACT Field-installable connectors provide a convenient method for terminating fiber optic cable at remote
More informationProduct Catalog FIBEROPTIC TEST & MEASUREMENT
Product Catalog FIBEROPTIC TEST & MEASUREMENT TABLE OF CONTENT INTRODUCTION CORPORATE OVERVIEW...3 PRODUCTS WIDE BAND COMPONENT TEST SYSTEM WCS Wide Band Component Test System...5 TUNABLE LASERS TLS5 Tunable
More informationVUE 2 App Version VUE2 User Manual. VUE 2 App Version
VUE2 User Manual VUE 2 App Version 1.1.8 1 Contents Introduction 3 Prerequisites. 3 Getting started.3 WiFi Set-up....4 Setting up your fiber inspection microscope and VUE2..6 Inspecting Fiber Ends and
More informationOFS300 Optical Fiber Scope
Inspection Noyes Inspection Scopes Scopes OFS300 Optical Fiber Scope The OFS 300 is a versatile instrument for the inspection of optical fiber connectors. By employing universal adapter cap mount, it can
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS MFS & Fan-Out cords PC/APC MULTIMODE PC The Diamond Multiple Fiber System (MFS)combines Diamond`s advanced polishing technology and the flexibility
More informationMaxTester 940/945 Telco OLTS FULLY AUTOMATED FASTEST BIDIRECTIONAL MEASUREMENTS FOR INSERTION LOSS, OPTICAL RETURN LOSS AND FIBER LENGTH
MaxTester 940/945 Telco OLTS FULLY AUTOMATED FASTEST BIDIRECTIONAL MEASUREMENTS FOR INSERTION LOSS, OPTICAL RETURN LOSS AND FIBER LENGTH ANALYSIS SOFTWARE First tablet-inspired multifunction optical loss
More informationSLD Drive SLD. Board FC/APC Connector. TEC Control. Board. Control Circuits. Control interface DB9 (Female)
Product Specification, Revision 1.0 SLD Light Source Module Part Number: IPSDS0902-1. Configuration SLD Drive Board SLD TEC Control Board FC/APC Connector Control Circuits Control interface DB9 (Female)
More informationINSPECTION TOOLS EYL10X. 10X Eye Loupe
INSPECTION TOOLS Fiber Scope with 200X Magnification 6X and 10X Eye Loupes Head Magnifier and Inspection Mirror SDPK Scratch-Dig Paddle 10125HG SMA Height Gauge FS200-LC LC Adapter for FS201 Scope MAG200K
More informationFIBEROPTIC TERMINATION&CASETTE
FIBEROPTIC TERMINATION&CASETTE TERMINATION SETS EXCLUSIVE SERIES TERMINATION BOXES turksat.com.tr 1U 19 12 W P PORT RAIL MODULE 19 1U 12 PORT SLIDING WITH TELESCOPIC RAIL & PLASTIC MODULE TYPE FEATURES
More informationA wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
More informationBUYER S GUIDE AND PRICE LIST March 23, 2004
Optical Power Meters...2 AC Adapter And Accessories for OPMs...2 LED and Laser Light Sources...3 AC Adapters for Light Sources...3 OLS 1-Dual, OLS2-Dual and OLS4 Accessories...3 Optical Loss Test Kits...4
More informationINTERNAL MANAGEMENT Sliding Patch Panels-S01 1U, 24 Port Sliding Patch Panel - ST, FC
Sliding Patch Panels-S01 1U, Port Sliding Patch Panel - ST, FC STROS01XXX00 Cable entry 4 x 10mm gland holes 2 x 20mm glad holes The Stronglink sliding tray optical fibre patch system in its basic form,
More informationFTTH SOLUTION. Content. Contral. Apartment. house. house 13P. 11P Adapter 11P 10P 11P 13P 13P. 10P Mechanical Splice 11P 10P 11P 14P 10P.
FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house
More informationCable Assemblies. Corning Cable Systems. An Evolant Solutions Product
Description As the industry s leading supplier of single-mode cable assemblies, offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high-fiber-count
More informationAF-OLK5A Series Fiber Optic Test kit
AF-OLK5A Series Fiber Optic Test kit Description The AF-OLK5A series test kits are the complete solution necessary for the installer to test, terminate and trouble shoot fiber optic systems. These test
More informationDIGITUS Fiber Optic Splice Box, 1U, basic housing, color grey (RAL 7035) or black (RAL 9005)
DIGITUS Fiber Optic Splice Box, 1U, Basic Housing Basic housing for splice box assembly Sturdy housing Sliding Available in colors grey and black Abstract DIGITUS Fiber Optic Splice Box, 1U, basic housing,
More informationLTS-2A LTS-10 LTS-10C LTS-11 LTS-12
Optical Loss Test Kits LTS-2A LTS-10 LTS-10C LTS-11 LTS-12 Description Fit your application to your budget. Our Optical Loss Test Kits, and Fiber Test Kits combine the dependability and accuracy of our
More informationCONNECTOR OVERVIEW. Application Notes. Author John Peter & Timo Perttunen. Issued June 2014
Application Notes CONNECTOR OVERVIEW Author John Peter & Timo Perttunen Issued June 2014 Abstract The connector and its adapter protect and align the mating fibers both axially and transversally to provide
More informationOptical Component Environmental Test System OCETS Plus Series
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Optical Component Environmental Test System OCETS Plus Series Key Features High Return Loss option (HiRL) monitors RL up to 70 db Up to 210 device channels (420
More informationApplications Engineering Notes. The US Conec MTP Multifiber Connector
Applications Engineering Notes Document Title Document Number The US Conec MTP Multifiber Connector AEN-1909 Revision Number Rev 2.0 Effective Date June 1, 2008 1.0 Document Purpose The purpose of this
More informationMTP/MPO Cable Assemblies
MTP/MPO Cable Assemblies MTP cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand Fan-Out, Interconnect and Trunk cable offer up to 36 times the
More informationInstallation Guide. 100BASE-TX/100BASE-FX Fast Ethernet Media Converter NC-200FT/FC. -1-iIiNC-200FT/FC P/N:
Installation Guide 100BASE-TX/100BASE-FX Fast Ethernet Media Converter NC-200FT/FC -1-iIiNC-200FT/FC P/N:750-0166-001 Table le of Contents General Description...3 Specifications...4 Connectors & Cables...5
More informationKI 2400/2800 SERIES HAND HELD FIBER SOURCE FEATURES. kingfisher.com.au. OPTICAL COMMUNICATIONS TEST APPLICATIONS (in combination with a power meter)
OPTICAL COMMUNICATIONS TEST APPLICATIONS (in combination with a power meter) Mixed single mode & multimode loss testing to 6 λ Multi-Fiber continuity & polarity testing Encircled Flux compliant testing
More informationConnectorMax Analysis Software DELIVERING FAST PASS/FAIL ASSESSMENT OF CONNECTOR ENDFACES
DELIVERING FAST PASS/FAIL ASSESSMENT OF CONNECTOR ENDFACES 2011 GLOBAL PORTABLE FIBER OPTIC TEST EQUIPMENT MARKET SHARE LEADERSHIP AWARD ConnectorMax delivers clear-cut pass/fail verdicts, eliminating
More informationLC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
More informationTESTING HIGH SPEED FIBER LINKS
TESTING HIGH SPEED FIBER LINKS Rodney Casteel, RCDD, DCDC, NTS, OSP - CommScope, Chair TIA FOTC Tyler Vander Ploeg, RCDD - Viavi Solutions Jamie Humphreys - EXFO Rob Gilberti - AFL Jim Davis - Fluke Networks
More information