Mounting Card MC1XZDCR. Accessories. Drive Compatibility. ZDR300EE12A8LDC Drives Supported ZDCR300EE12A8LDC
|
|
- Robert McDaniel
- 6 years ago
- Views:
Transcription
1 Features Mounts ZDR or ZDCR drive Single axis mounting card All detachable connections On-board signal conditioning On-board CANopen transceiver for ZDCR drives On-board 8-position DP switch for communication settings On-board jumpers for board configuration Both screw terminal and D-Sub connections for signal /O Screw terminal mating connectors included Standard DN tray dimensions nputs/outputs Programmable analog reference input (12- bit resolution) 2 programmable differential digital inputs (Auxiliary Encoder or Step and Direction input) 3 programmable digital inputs 3 programmable digital outputs Drive Compatibility ZDR300EE12A8LDC Drives Supported ZDCR300EE12A8LDC Axis Supported 1 Accessories Description The MC1XZDCR mounting card is designed to host a ZDCR or ZDR Series DigiFlex servo drive. This mounting card offers convenient quick-disconnect connectors (mating screw terminals included) and D-Sub connectors for easy interfacing. D-sub connectors are provided for compatibility with DR100EE and DX/DC200 series motor wiring configurations. A logic LED and power LED indicate supply status. Page 1 of 12
2 BLOCK DAGRAM & SPECFCATON SUMMARY RX TX GND CAN_L CAN_H CAN_GND CAN_TERM CAN_V+ CAN_SHLD PROGR. NPUT 1..3 GND +PROGR. NPUT 4,5 -PROGR. NPUT 4,5 PROGR. OUTPUT MC1XZDCR +5V CAN TRX 10K +5V CAN SO 20K 20K JF1 JF2 JF4 JF , P1 10, ,21 17, 19 18, 20 7, 8, 9 ZDCR... ZDR... P2 1 4, 5 2, 3 11, 12 9, 10 7, 8 P ,27,29 26,28,30 8 POSTON DP SWTCH DECODNG +5V 20K 20K +5V +5V 10K +5V N HGH VOLTAGE GROUND MOTOR A MOTOR B MOTOR C MOT ENC A/B/+ MOT ENC A/B/- GND 5,21 10K +REF/PROGR. ANALOG N 1 -REF/PROGR. ANALOG N 1 10K 10K ,24,24 +5V 20K 20K +HALL A,B,C -HALL A,B,C Mechanical Specifications Mounting Signal Connector: P1 Mounting Power Connector: P2 Feedback Connector: P3A* Feedback Connector: P3B* Signal Connector: P4* Signal Connector: P5* Power Connector: P6* Logic Power Connector: P7* CAN Communication Connector: PCAN RS232 Communication Connector: PCN1 Signal Connector: PCN2 Feedback Connector: PCN3 Size (L x W x H) Weight 30-pin, dual-row, 2.54 mm pitch socket 12-pin, 2.54 mm pitch socket 8-port, 3.5 mm spaced insert connector 8-port, 3.5 mm spaced insert connector 8-port, 3.5 mm spaced insert connector 8-port, 3.5 mm spaced insert connector 5-port, 5.08 mm spaced insert connector 3-port, 5.08 mm spaced insert connector 9-pin, male D-sub 9-pin, female D-sub 26-pin, high-density, female D-sub 15-pin, high-density, female D-sub 6.55 x 2.83 x 0.64 inches (TBA) Notes Mating connectors included. Page 2 of 12
3 PN FUNCTONS P1 Mounting Signal Connector This connector mates directly to the drive. For pin functions refer to the drive datasheet. P2 Mounting Power Connector This connector mates directly to the drive. For pin functions refer to the drive datasheet. P3A Feedback Connector Pin Name Description /O 1 +5V 5V output from 5V logic supply O 2 GND Ground GND 3 +HALL A Commutation sensor input. Can be used with single ended or differential Hall sensors. 4 -HALL A Leave open in case of single ended Hall sensors. 5 +HALL B Commutation sensor input. Can be used with single ended or differential Hall sensors. 6 -HALL B Leave open in case of single ended Hall sensors. 7 +HALL C Commutation sensor input. Can be used with single ended or differential Hall sensors. 8 -HALL C Leave open in case of single ended Hall sensors. P3B Feedback Connector Pin Name Description /O 1 +5V 5V output from 5V logic supply O 2 GND Ground GND 3 MOT ENC A+ Differential Encoder nput. For single ended encoder signals, leave the A 4 MOT ENC A- terminal open. 5 MOT ENC B+ Differential Encoder nput. For single ended encoder signals, leave the B 6 MOT ENC B- terminal open. 7 MOT ENC + Differential Encoder nput. For single ended encoder signals, leave the 8 MOT ENC - terminal open. P4 Signal Connector Pin Name Description /O 1 +REF Differential reference signal input, 12-bit resolution. Can also be used as 2 -REF programmable analog input 1. 3 GND Ground GND 4 GND Ground GND 5 PDO1 Programmable digital output 1 O 6 PDO2 Programmable digital output 2 O 7 PDO3 Programmable digital output 3 O 8 GND Ground GND Page 3 of 12
4 P5 Signal Connector Pin Name Description /O 1 PD1 Programmable digital input 1 2 PD2 Programmable digital input 2 3 PD3 Programmable digital input 3 4 GND Ground GND 5 +PD4 Programmable differential digital input, or Step+/Step- or Aux Enc A+/A- 6 -PD4 7 +PD5 Programmable, differential digital input or Direction+/Direction - or Aux Enc 8 -PD5 B+/B- P6 Power Connector Pin Name Description /O 1 MOTOR A Motor phase A O 2 MOTOR B Motor phase B O 3 MOTOR C Motor phase C O 4 GND Ground GND 5 +HV DC motor power input. This input is used to supply power to the motor. P7 Logic Power Connector Pin Name Description /O 1 +5V 5V logic supply 2 GND Ground GND 3 CHASSS Connected to PCN1, PCN2, PCN3 shells PE PCAN CAN Communication Connector Pin Name Description /O 1 N/C Not connected - 2 CAN_L CAN _L bus line (dominant low) 3 CAN_GND CAN ground GND 4 N/C Not connected - 5 CAN_SHLD CAN shield, connected to Chassis PE 6 N/C Not connected - 7 CAN_H CAN_H bus line (dominant high) 8 CAN_TERM Termination. Connect to CAN_H for CAN bus termination (120 Ohm) GND 9 CAN_V+ CAN external supply VDC for isolated CAN interface Page 4 of 12
5 PCN1 RS232 Communication Connector Pin Name Description /O 1 N/C Not connected - 2 TX/-TX RS232: Transmit; RS485: -TX O 3 RX/-RX RS232: Receive; RS485: -RX 4 N/C Not connected - 5 GND Signal ground GND 6 +TX RS485: +TX O 7 N/C Not connected - 8 +RX RS485: +RX 9 N/C Not connected - PCN2 Signal Connector Pin Name Description /O 1 PDO1 Programmable digital output O 2 GND Ground GND 3 PDO2 Programmable digital output O 4 +REF Differential reference signal input, 12-bit resolution. Can also be used as 5 -REF programmable analog input 1. 6 N/C Not Connected - 7 N/C Not Connected - 8 N/C Not Connected - 9 -PD5 Programmable, differential digital input or Direction - or Aux Enc B- 10 PDO3 Programmable digital output O 11 PD1 Programmable digital input 12 PD2 Programmable digital input 13 PD3 Programmable digital input 14 N/C Not Connected V OUT 5V output from 5V logic supply O 16 GND Ground GND 17 +PD4 Programmable differential digital input, or Step+ or Aux Enc A+ 18 +PD5 Programmable, differential digital input or Direction+ or Aux Enc B+ 19 N/C Not Connected - 20 MOT ENC A+ Encoder Output (from connector P3B, PCN3), not buffered O 21 MOT ENC A- O 22 MOT ENC B+ Encoder Output (from connector P3B, PCN3), not buffered O 23 MOT ENC B- O 24 MOT ENC + Encoder Output (from connector P3B, PCN3), not buffered O 25 MOT ENC - O 26 -PD4 Programmable differential digital input, or Step- or Aux Enc A- Page 5 of 12
6 PCN3 Feedback Connector Pin Name Description /O 1 +HALL A 2 +HALL B 3 +HALL C Commutation sensor input. Can be used with single ended or differential Hall sensors. Commutation sensor input. Can be used with single ended or differential Hall sensors. Commutation sensor input. Can be used with single ended or differential Hall sensors. 4 MOT ENC A+ Differential Encoder nput. For single ended encoder signals, leave the A 5 MOT ENC A- terminal open. 6 MOT ENC B+ Differential Encoder nput. For single ended encoder signals, leave the B 7 MOT ENC B- terminal open. 8 MOT ENC + Differential Encoder nput. For single ended encoder signals, leave the 9 MOT ENC - terminal open. 10 -HALL A Leave open in case of single ended Hall sensors. 11 -HALL B Leave open in case of single ended Hall sensors. 12 GND Ground GND 13 +5V 5V output from 5V logic supply O 14 N/C Not Connected HALL C Leave open in case of single ended Hall sensors. Page 6 of 12
7 BOARD CONFGURATON Jumper Functions Pins Connected Jumper Description None JF1 Communication interface selection. CAN is only available on the RS232 CAN RS485 JF2 ZDCR. RS485 is only available on the ZDR. RS232 CAN RS485 JF3 Place holder for spare jumpers. No functionality JF4 For use with ZDCR only. Select to power the CAN interface internally from an on-board power supply or externally from CAN_V+ (12V) of the PCAN connector. ZDR External CAN supply (ZDCR) nternal CAN supply (ZDCR) JF5 Place holder for spare jumpers. No functionality JF8 For use with ZDCR only. Selects drive to be the terminating node in a CAN network. DP Switch Functions CAN & RS232/RS485 Address Settings ZDR or nonterminating node Terminating node Node-D SW1 SW2 SW3 SW4 SW5 SW6 Load from non-volatile memory OFF OFF OFF OFF OFF OFF 1 ON OFF OFF OFF OFF OFF 2 OFF ON OFF OFF OFF OFF 3 ON ON OFF OFF OFF OFF 63 ON ON ON ON ON ON - CAN Bus & RS232/RS485 Bit Rate Settings Bit Rate (bits/sec) SW7 SW8 CAN RS232 Load from non-volatile memory Load from non-volatile memory OFF OFF 500K 9.6K ON OFF 250K 38.4K OFF ON 125K 115.2K ON ON Page 7 of 12
8 CONNECTOR NFORMATON Connector nformation P1 Mounting Signal Connector 30-pin, dual-row, 2.54 mm pitch header No mating connector required. Mate directly to drive. Connector nformation P2 Mounting Power Connector 12-pin, 2.54 mm pitch header No mating connector required. Mate directly to drive. P3A Feedback Connector Connector nformation 8-port, 3.5 mm spaced insert connector Phoenix Contact: P/N HALL B 6 -HALL B 7 +HALL C 8 -HALL C 4 -HALL A 3 +HALL A 2 GND 1 +5V P3B Feedback Connector Connector nformation 8-port, 3.5 mm spaced insert connector Phoenix Contact: P/N MOT ENC B+ 6 MOT ENC B- 7 MOT ENC + 8 MOT ENC - 4 MOT ENC A- 3 MOT ENC A+ 2 GND 1 +5V Page 8 of 12
9 P4 Signal Connector Connector nformation 8-port, 3.5 mm spaced insert connector Phoenix Contact: P/N PDO1 6 PDO2 7 PDO3 8 GND 4 GND 3 GND 2 -REF 1 +REF P5 Signal Connector Connector nformation 8-port, 3.5 mm spaced insert connector Phoenix Contact: P/N PD4 6 -PD4 7 +PD5 8 -PD5 4 GND 3 PD3 2 PD2 1 PD1 Connector nformation P6 Power Connector 5-port, 5.08 mm spaced insert connector Phoenix Contact: P/N or (vertical screw terminal) 3 MOTOR C 2 MOTOR B 1 MOTOR A 4 GND 5 +HV Connector nformation P7 Logic Power Connector 3-port, 5.08 mm spaced insert connector Phoenix Contact: P/N or (vertical screw terminal) 3 CHASSS 2 GND 1 +5V Page 9 of 12
10 Connector nformation PCAN CAN Communication Connector 9-pin, male D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) 2 CAN_L 3 CAN_GND 5 CAN_SHLD 9 CAN_V+ 8 CAN_TERM 7 CAN_H Connector nformation PCN1 RS232 Communication Connector 9-pin, female D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) 5 GND 3 RX 2 TX Connector nformation PCN2 Signal Connector 26-pin, high-density, female D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) +5V OUT 15 GND 16 +PD4 17 +PD5 18 PDO3 10 PD1 11 PD2 12 PD PD5 5 -REF 4 +REF 3 PDO2 2 GND 1 PDO1 20 MOT ENC A+ 21 MOT ENC A- 22 MOT ENC B+ 23 MOT ENC B- 24 MOT ENC + 25 MOT ENC PD4 Page 10 of 12
11 Connector nformation PCN3 Feedback Connector 15-pin, high-density, female D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) MOT ENC - -HALL A MOT ENC B MOT ENC B- MOT ENC MOT ENC A- 4 MOT ENC A+ 3 +HALL C 2 +HALL B 1 +HALL A GND 13 +5V 15 -HALL C Page 11 of 12
12 MOUNTNG DMENSONS ORDERNG NFORMATON MC 1 X ZDCR Product Type MC indicates mounting card Axis Number of axis supported Drive ndicator ndicates the drive type(s) compatible with the mounting card Revision Omit from part number when ordering (ranges from A through Z) Notes: Revision This letter is not required when placing an order. Some letters are skipped when assigning revisions. Page 12 of 12
ADVANCED MOTION CONTROLS 3805 Calle Tecate, Camarillo, CA Tel: (805) , Fax: (805) Page 1 of 12
July 25, 2005 DIGIFLEX DIGITAL SERVO DRIVES MODEL: ZDR150EE12A8LDC FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with
More informationMounting Card MC1XDZC02
Description The MC1XDZC02 mounting card is designed to host a DZC or DZXC series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact
More informationMounting Card MC1XDZR02-QD
Description The MC1XDZR02-QD mounting card is designed to host a DZR or DZRC series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact
More informationMounting Card MC1XDZR02-HP1
Description The MC1XDZR02-HP1 mounting card is designed to host a DZR or DZXR series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a
More informationDigiFlex Performance Servo Drive DPCANIE-100B080
DigiFlex Performance Servo Drive DPCANE-100B080 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDigiFlex Performance Servo Drive DPCANTR-025B200
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationDigiFlex Performance Servo Drive DPCANIA-100B080
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationDigiFlex Performance Servo Drive DPCANIA-100A400
DigiFlex Performance Servo Drive DPCANA-100A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDigiFlex Performance Servo Drive DPRALTE-020B080
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationDigiFlex Performance Servo Drive DPCANTA-060B080
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationMounting Card MC1XDZPC01
Description The MC1XDZPC01 mounting card is designed to host a DZCANTU series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact
More informationDigiFlex Performance Servo Drive DPCANIA-015S400
DigiFlex Performance Servo Drive DPCANA-015S400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DR101EE20A8BDC-QD1
DGFLEX DGTAL SERV DRVES MDEL: DR101EE20A8BDC-QD1 FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable gain
More informationDigiFlex Performance Servo Drive DPEANIU-100B080
DigiFlex Performance Servo Drive DPEANU-100B080 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DR100EE16A8BDC
DGFLEX DGTAL SERV DRVES MDEL: DR100EE16A8BDC FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable gain settings
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DR101EE25A20NAC
DGFLEX DGTAL SERV DRVES MDEL: DR101EE25A20NAC FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable gain settings
More informationMODEL DRIVER Ic Ip VDC
Provides Mounting & Connections for Stepnet Module CANopen Stepping Driver FEATURES Develop & Debug Stepnet projects then transfer design to OEM pc board. MODEL DRIVER Ic Ip VDC -075-01 STM-075-07 5 7
More informationAZ Drive Family Mounting Card MC1XAZ01-HR
Description The MC1XAZ01-HR mounting card is designed to host an AZ or AZX series analog servo drive. This mounting card offers convenient quick-disconnect signal connectors (mating screw terminals included).
More informationMDK. Accelnet Module DevKit. Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES
Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES Works with all Accelnet Models Develop & Debug Accelnet projects then transfer design to oem pc board. Dev Kit Model * Vdc
More informationH2W Technologies, Inc Ferry Court Santa Clarita CA USA Main Fax
Description Power Range The servo amplifier is designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drive is
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DQ111EE15A40LDC
DGFLEX DGTAL SERV DRVES MDEL: DQ111EE15A40LDC WTH NTERFACE FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable
More informationM/V Series Digital Servo Drive DVC250A060
Description Power Range The DVC250A060 DigiFlex Performance digital servo drive is designed to drive brushed, brushless, and AC induction servomotors from a compact form factor ideal for embedded applications.
More informationCDN502 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN502 HIGH DENSITY I/O ADAPTER USER GUIDE 13050201 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN502 PRODUCT OVERVIEW 1 DN502 INSTALLATION 1 POWER
More informationCDN503 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE 13050301 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN503 PRODUCT OVERVIEW 1 DN503 INSTALLATION 1 POWER
More information4 Connection and interface
MDrive 23 Motion Control 4 Connection and Interface 4 Connection and interface EXPOSED SIGNALS! DANGER Hazardous voltage levels may be present if using an open frame power supply to power the product.
More informationThe SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors.
Date: 25 July 2008 www.quicksilvercontrols.com SilverNugget N3 M-Grade The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors. Property of Page 1 of 13 This document is subject
More information4.8 Expansion Module MAC00-FS1/FS4
.8 Expansion Module MAC00-FS/FS MAC00-FS With M connectors MAC00-FS With D sub connectors TT08GB.8. High speed serial RS8 module MAC00-FS and FS Introduction The MAC00-FS and FS are used for high speed
More informationCombining Today s Best Technologies. For Tomorrow s Break Through Discoveries. Feedback Versions Analog Sin/Cos. Control Modes.
Feedback Versions Analog Sin/Cos Control Modes Command Interface Feedback I/O - Digital Accelnet Micro Panel Dimensions: mm [in]. Model * Vdc Ic Ip ACJ-055-09 20-55 9 ACJ-055-18 20-55 6 18 20-90 1 ACJ-090-09
More informationDefining the Future in Motion Control
Defining the Future in Motion Control USER S MANUAL 1 DINIO7 user s manual Overview The DINIO7 is a DIN-rail mounted peripheral for the SmartMotor versions 3 and 4 product lines Hereafter, the SmartMotor
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DQ111SE15A40LDC
DGFLEX DGTAL SERV DRVES MDEL: DQ111SE15A40LDC WTH NTERFACE FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable
More informationApplications: Power generator sets and control systems for industrial engine applications.
TECHNICAL DATASHEET #TDAXTC4CO Thermocouple Module, 4 Channel P/N: AXTC4CO Monitors 4 Type J, K or T Thermocouples CANopen, RS-232 Description: The Thermocouple Module monitors up to 4 channels of Type
More informationMOTION COORDINATOR MC403 / MC403-Z Quick Connection Guide
8 DIGITAL INPUTS INCLUDING 6 X REGISTRATION INPUTS AND 4 BI-DIRECTIONAL I/O 2 ANALOGUE INPUTS AND 2 VOLTAGE OUTPUT AND WDOG RELAY CAN PORT FOR TRIO CAN I/O, DEVICENET SLAVE, CANOPEN OR USER PROGRAMMABLE
More informationMOTION COORDINATOR MC405 Quick Connection Guide
CAN PORT FOR TRIOCAN I/O, DEVICENET SLAVE, CANOPEN OR USER PROGRAMMABLE INPUTS INCLUDING REGISTRATION INPUTS BI-DIRECTIONAL I/O ANALOGUE INPUTS AND ANALOGUE OUTPUTS, WDOG RELAY PANEL MOUNT AND DIN RAIL
More informationAxCent Retrofit Large Size Models
Introduction This document covers the steps to retrofit an AxCent servo drive into an existing Brushed or Brushless Analog drive application. The information in this document relates specifically to the
More informationThe SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors.
Date: 5 November 2008 www.quicksilvercontrols.com SilverNugget N2 M-Grade The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors. Property of Page 1 of 13 This document is
More informationSYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 INDUSTRIAL CONTROLLER S4520-RDC: MOTION CONTROL CO-CPU With RESOLVER FEEDBACK Intelligent I/O board with motion control I/O and built-in M4500 processor (same as
More informationDigital DRIVE for Brushless motor MD Serial
Digital DRIVE for Brushless motor MD Serial Installation guide Read manual before installing and respect all indications with this icon: MD-GI/EN Table of Contents 1- Introduction... 3 1-1- Warning...
More informationSilverDust D2-IGK Datasheet
Date: 16 October 2018 www.quicksilvercontrols.com SilverDust D2-IGK Datasheet Servo controller/driver for QuickSilver's NEMA 11, 17 and 23 frame, high torque, direct drive servomotors. This SilverDust
More informationLVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
More informationEASY21x/23x-EVA. Evaluation Board for EASY21x / EASY23x PLC core. General Description. Ordering Information
Evaluation Board for EASY21x / EASY23x PLC core General Description The is an evaluation board for the PLC core modules and PLC chips just like the EASY215 or EASY235 series. The board supports all the
More informationUNIVERSAL MOTION INTERFACE (UMI) ACCESSORY
USER GUIDE UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY Introduction This user guide describes how to use the UMI-A, UMI-Flex, and UMI-Flex accessories. The UMI products are connectivity accessories you
More informationMotion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control
MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control Allied Motion s MXC motion controller is a very compact, multi-axis servo and/or step motor motion controller,
More information8 PNP or NPN inputs including 8 registration inputs
CAN port for trio CAN i/o, DEVICENET slave, canopen or user programmable 8 PNP or NPN inputs including 8 registration inputs 8 PNP or NPN inputs Backlit Display and status LEDs 8 Digital Outputs RS232
More informationP/N: P E201. imotioncube BX-CAN DATASHEET. Page: 1 of 5. Motor sensor configurations. Sensor. All dimensions are in mm.
imotioncube BX-C DATASHEET Sensor Incr. Encoder Motor sensor configurations Motor PMSM BLDC DC ST BRUSH (2-ph) ST (3-ph) Incr. Encoder + Hall Analog Sin/Cos encoder SSI BiSS-C* Linear Halls Tacho Open-loop
More informationApplications: Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
TECHNICAL DATASHEET #TDA06020 CAN (SAE J1939) or (CANopen ) with Electronic Assistant P/N: A06020 Features: 1 or 2 axis inclination or slope sensors 2 axis (-80º 80º), functional up to +90 º 1 axis, vertically
More informationCONCEPT P/N: AX Concept TECHNICAL DATASHEET #TDAX Analog Input CAN Controller CAN (SAE J1939 or CANopen ) with Electronic Assistant
Concept TECHNICAL DATASHEET #TDAX030400 6 Analog Input CAN Controller CAN (SAE J1939 or CANopen ) with Electronic Assistant Features: 6 analog inputs (0-5V, 0-10V, 0-20mA, 4-20mA, Resistance, PWM, Digital,
More informationNEW. Servo Controller Series E1100 E1100-DP E1100-MP E1100-DN E1100-RS E1100-MT E1100-CO E1100-GP
NEW Servo Controller Series E1100 E1100-DP E1100-MP E1100-DN E1100-RS E1100-MT E1100-CO E1100-GP Servo Controller Series E1100 The LinMot controller series E1100 are full digital controlled servo amplifiers
More informationCDN220 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE 13022001 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS CDN220 PRODUCT OVERVIEW 1 CDN220 INSTALLATION 2 POWER
More informationTECHNICAL DATASHEET #TDAX Analog Signal Output CAN Controller (SAE J1939)
Distributed I/O for Engine Control Systems Features: 1 analog signal output (voltage or current) User selectable output range from +/-10V or +/-20 ma, including: 0-5V; 0-10V; +/-5V; +/-10V; 0-20mA; and
More informationDigiFlex Performance Servo Drive DZSANTU-020B080
Description Power Range The DZSANTU020B080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive
More information4 Connection and interface
4 Connection and interface EXPOSED SIGNALS! DANGER Hazardous voltage levels may be present if using an open frame power supply to power the product. Failure to follow these instructions will result in
More informationTCNM-ACBB1 Installation Manual
The TCNM-ACBB1 is a connection box that can be used as an accessory to facilitate system connections for installation and device replacement of several Banner family reading devices. System cabling is
More informationMotor controllers SFC-DC
Key features Hardware The motor controller SFC-DC serves as a positioning controller and closed loop position controller Available with or without control panel Thanks to IP54 protection, the motor controller
More information4.7 Expansion Module MAC00-FS1/FS4
MAC00-FS4 With M12 connectors MAC00-FS1 With D sub connectors TT1068GB 4.7.1 High speed serial RS485 module MAC00-FS1 and FS4 Introduction The MAC00-FS1 and FS4 are used for high speed RS485 communication
More informationCANopen. CiA Draft Recommendation DR Cabling and Connector Pin Assignment. Version 1.1 Date: 20 April CAN in Automation (CiA)
CANopen Cabling and Connector Pin Assignment CiA Draft Recommendation DR-303-1 Version 1.1 Date: 20 April 2001 CAN in Automation (CiA) Table of Contents 1 Scope... 3 2 References... 3 2.1 Normative references...
More informationVisConnect VC-2xxx Series Converter. Product Manual. VC-2xxx Series Converter Product Manual
VisConnect VC-2xxx Series Converter Products Covered in this manual: VC-2010 CANopen Converter 267 Lowell Road, Hudson, NH USA Pg. i Revision Table Revision Date Change A April 2012 Initial Release B July
More informationTECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR EXTERNAL DISTRIBUTION TECHNICAL PRODUCT DATASHEET ES-Key Climate Control Module P/N
More informationApplications: Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
TECHNICAL DATASHEET #TDAX06025X Inclinometer CANopen, 2 5-pin M12 Connectors Features: 1 or 2 axis inclination or slope sensors 2 axis (-80º 80º), functional up to +90 º 1 axis, vertically positioned (-180º
More informationPower & Communication Cables
Power & Communication Cables CBLSM-M & CBLSM-X series is the main power and communications cable consisting of a 7W main motor connector split out to a pre-wired RS- DB- connector to plug directly into
More informationMOTION COORDINATOR MC206X Quick Connection Guide
I/O Connector 1 Analogue In / Inputs 0-7 5 Way Connector Power /CANbus I/O Connector 2 24V Power / I/O 8-15 I/O Connector 3 WDOG / Ref Encoder / Analogue Outputs USB Serial A Serial B Axes 0-3 Encoder
More informationUNIVERSAL MOTION INTERFACE (UMI) ACCESSORY
USER GUIDE UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY Contents This user guide describes how to use the UMI-77, UMI-A, UMI-Flex, and UMI-Flex accessories. Introduction... What You Need to Get Started...
More informationINTEGRATED MICROSTEPPING MOTOR DRIVER AND HIGH PERFORMANCE MACHINE/PROCESS CONTROLLER
Sold by Servo Systems Co. 115 Main Road, P.O. Box 97, Montville, NJ 07045-0097 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com INTEGRATED MICROSTEPG MOTOR DRIVER
More informationClick&Move. Automation Solution. Motion Automation Control Card Input/Output Module. Description
The Motion Automation Control Card (MACC) family are general purpose motion/automation controllers with embedded Click&Move programming capability. Most applications for the MACC platform require digital
More informationISO 9001 CERTIFIED. 607 NW 27th Ave Ocala, FL Phone: (352) or Fax: (352) SUITABLE FOR EXTERNAL DISTRIBUTION
ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 ES-Key 12- Relay Board P/N 103190 and 103338 PAGE 1 of 13 1. REVISI LOG... 2 2. OVERVIEW... 3 2.1. PART NUMBERS... 3 2.2. MODULE
More informationXynergy XS Motherboard Rev3 Documentation April 24, 2012
Topic Page Overview 1 DIMM Socket 1 Power Supply 2 I/O Voltage Selection 3 I/O Connectors 3,4 I2C/SMBUS 5 RS232 5 Testing I/Os 6 SD-Card 6 USB2.0 OTG 7 Ethernet Interface 7 CAN Interfaces 8 JTAG Interfaces
More informationQUICK START GUIDE MC508
TECHNOLOGY MICRO SD CARD ETHERNET PORT SERIAL PORT BACKLIT DISPLAY CAN / DEVICENET SLAVE / USER PROGRAMMABLE (5 WAY CONNECTOR) ALALOGUE IN 16 PNP OR NPN INPUTS INC 8 REGISTRATION (I-O CONNECTOR 1) 8 DIGITAL
More informationSingle Axis Servo Motor Drives SXD Series
Single Axis Servo Motor Drives SXD Series Compact modular drive with output up to 15 A, 80 V, 1000 W Allied Motion s SXD is a single-axis digital servo motor drive capable of driving a DC brush, DC brushless
More informationAdditional board ZIB2-PDx-N for Plug & Drive motors PDx-N
Additional board ZIB2-PDx-N for Plug & Drive motors PDx-N Technical data Operating voltage: Interface: 24 48 V DC or Application information PDx-N motor side connection X2 motor power Pin no. Name PD2-N-2
More informationApplications: Industrial Automation, Cranes, Hoists, Utility Vehicles, Off-highway, Ag, and Forestry Equipment
Features: 1 or 2 axis inclination or slope sensors 2 axis (-80º 80º), functional up to +90 º 1 axis, vertically positioned (-180º 180º or 0 360º) High resolution and accuracy SAE J1939 (CANopen models
More information^2 Accessory 8DCE ^1 USER MANUAL. ^3 CE Certified PC Board/Terminal Block. ^4 3Ax xUxx. ^5 October 27, 2003
^1 USER MANUAL ^2 Accessory 8DCE ^3 CE Certified PC Board/Terminal Block ^4 3Ax-602654-xUxx ^5 October 27, 2003 Single Source Machine Control Power // Flexibility // Ease of Use 21314 Lassen Street Chatsworth,
More informationmotioncookie SYSTEM IN A PACKAGE
motioncookie SYSTEM IN A PACKAGE motioncookie TMCC160-EVAL MANUAL TMCC160 TMCL Hardware Version 1.1 Document Revision 1.0 2015-AUG-16 The TMCC160-EVAL is designed for evaluating all features of the TMCC160-LC
More informationInstallation Guide Controller Series E130/E230/E430
Controller Series E0/0/0 Installation Guide Controller Series E0/E0/E0 Products E0-DP E0-DP E0-DP Content IMPORTANT NOTES FOR E0/E0/E0 SERIES CONTROLLERS... SYSTEM OVERVIEW... E0 SERIES FUNCTION AND WIRING...
More informationTMCM-142-IF. Hardware Manual
TMCM-142-IF Hardware Manual Version: 1.01 2009-JUL-31 Trinamic Motion Control GmbH & Co KG Sternstraße 67 D - 20 357 Hamburg, Germany http://www.trinamic.com TMCM-142-IF Manual (V1.01/2009-JUL-31) 2 Table
More informationACR8020 Hardware Manual
p/n YPM08126 Automation ACR8020 Hardware Manual Effective: October 7, 2002 This page intentionally left blank. CHANGE NOTICE ACR8020 Hardware Manual P/N PM08126 Version Change: From: Version 1.00, Dated
More informationAG300 Family CTL01-3A-03, AMP01-2A-02
AG300 Family CTL01-3A-03, AMP01-2A-02 Hardware User's Manual Page 1 Revision control table Version Description Date 1.0 Initial (based on Hardware Manual of previous hardware versions) April 27, 2016 1.1
More informationACR8000 Hardware Manual
p/n YPM08119 Automation ACR8000 Hardware Manual Effective: October 7, 2002 This page intentionally left blank. ACR8000 Hardware Manual P/N PM08119 Version Change: From: Version 1.02, Dated 7/8/1999 To:
More informationCornet Digital Servo Drive Installation Guide
Cornet Digital Servo Drive Guide August 2004 Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging to Elmo Motion Control
More informationDIP053 QUAD PC/AT TO CAN ADAPTER MODULE
DIP053 QUAD PC/AT TO CAN ADAPTER MODULE 14005301 D.I.P. Inc P.O. Box 9550 Moreno Valley, CA 92552-9550 909-924-1730 TABLE OF CONTENTS INTRODUCTION ------------------------------------------------ 1 HARDWARE
More informationMotor controllers SFC-DC
Key features Hardware The motor controller SFC-DC serves as a positioning controller and closed loop position controller Available with or without control panel Thanks to IP54 protection, the motor controller
More information4Trio Motion Technology3
4Trio Motion Technology3 MC 202 Motion Controller Product Overview 3-1 3.0 Motion Coordinator 202 Description 3.1 Motion Coordinator 202 The Motion Coordinator 202 is a miniature stepper/servo positioner
More informationHARDWARE MANUAL TMCM-6110 V TRINAMIC Motion Control GmbH & Co. KG Hamburg, Germany. MODULES FOR STEPPER MOTORS
MODULES FOR STEPPER MOTORS MODULES V.0 HARDWARE MANUAL + + TMCM-60 6-axes stepper controller / driver up to.a RMS / 24V DC USB, CAN, RS48 + + TRINAMIC Motion Control GmbH & Co. KG Hamburg, Germany www.trinamic.com
More informationTM7NCOM16A CANopen interface block - IP67-16 I/O - M12
Characteristics CANopen interface block - IP67-16 I/O - M12 Main Range of product Product or component type Range compatibility Enclosure material Bus type [Ue] rated operational voltage Input/Output number
More informationE-Learning, DC drives DCS800 Hardware D5 D7, part 2
E-Learning, DC drives DCS800 Hardware D5 D7, part 2 August 24, 2010 Slide 1 Objectives After completing this module, you will be familiar with: Function of POW-4 board Internal field exciter FEX-4 25 Function
More informationOvervoltage Protection
Overvoltage Protection Weidmuller has a complete line of overvoltage protection devices to effectively stop the harmful effects of electrical overvoltage and electrical noise. There is strong potential
More informationBreakout Box Hardware Manual
p/n YPM08125 Automation Breakout Box Hardware Manual Effective: October 7, 2002 This page intentionally left blank. CHANGE NOTICE Breakout Box Hardware Manual P/N PM08125 Version Change: From: Version
More information4.2 Expansion Modules MAC00-B1/B2/B4
4. Expansion Modules MC00//4 MC00 With DSU connectors MC00 With cable glands MC004 With M connectors 4.. Expansion modules MC00, and 4 overall description The expansion modules MC00, and 4 can be mounted
More informationMotor units MTR-DCI, intelligent servo motors
-U- Type discontinued Motor units MTR-DCI, intelligent servo motors Key features General information The motor unit MTR-DCI is an innovative motor with integrated power electronics for positioning tasks.
More informationApplication Note #1447. Introduction. Standard Products. Optima Series Interconnect Options
Apr-06 Application Note #1447 Optima Series Interconnect Options Introduction This application note details the various methods of available connections for the Optima series motion controllers. Interconnect
More informationPridgen Vermeer Robotics ATmega128 Revision 0
Features: 6x 8-bit I/O Ports 4x A/D Inputs 6x PWM Headers 2x RS 232 Terminals Power Bus LCD Header (4-bit mode) Smart Power Connecter Power Switch Header Power LED Debug LED Note: Some pins have multiple
More informationxpico Wi-Fi Embedded Device Server Evaluation Kit User Guide
xpico Wi-Fi Embedded Device Server Evaluation Kit User Guide Part Number 900-643-R Revision B July 2013 Copyright and Trademark Warranty Contacts 2013 Lantronix, Inc. All rights reserved. No part of the
More informationPCAN-Router FD Universal, programmable Converter for CAN FD and CAN. User Manual. Document version ( )
PCAN-Router FD Universal, programmable Converter for CAN FD and CAN User Manual Document version 1.0.1 (2017-01-27) Relevant products Product Name Model Part number PCAN-Router FD 2 D-Sub connectors IPEH-002214
More informationThis manual provides information for the final user application developer on how to use SPC57S-Discovery microcontroller evaluation board.
User manual SPC570S-DISP: Discovery+ Evaluation Board Introduction This manual provides information for the final user application developer on how to use SPC57S-Discovery microcontroller evaluation board.
More informationOperating Bulletin. Model BB3-232 and BB3-I-232 USB Multi-Drop Box. The Fastest Flow Controller Company in the World!
Operating Bulletin Model BB3-232 and BB3-I-232 USB Multi-Drop Box The Fastest Flow Controller Company in the World! 1 10/16/2017 Rev.1 DOC-BB3232MAN 2 Introduction Alicat BB3-232 Multi-Drop Box Operating
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationLexium MDrive. LMD A85 CANopen REACH IP65. Product overview. General features. Intelligent motion systems
Lexium MDrive LISTED REACH IP65 Product overview Robust Lexium MDrive CANopen products integrate 1.8 2-phase stepper motors with I/O, motion controller, drive electronics, and encoder delivering hmt closed
More information9/Series Hardware TAB 5. 9/440 CNC Systems
9/Series Hardware TAB 5 9/440 CNC Systems 852062 RM005A EN P June 2001 PN 198126 2 Section 5A The 9/440 Resolver based CNC/Drive System 5A.0 Section Overview The 9/440 Resolver based CNC/Drive system is
More informationLexium MDrive. LMD A57 CANopen REACH IP65. Product overview. General features. Intelligent motion systems
Lexium MDrive LISTED REACH IP65 Product overview Robust Lexium MDrive CANopen products integrate 1.8 2-phase stepper motors with I/O, motion controller, drive electronics, and encoder delivering hmt closed
More informationAddendum for 125B Bushealth Measurements
Addendum for 125B Bushealth Measurements Introduction This Addendum contains information to extend the information presented in the Fluke 125B Users Manual. The purpose of this Addendum is to give more
More informationipos4808 MY-CAN-STO DATASHEET P/N: P E111
DATASHEET Rear view; Pins facing upwards; All dimensions are in mm; Header pitch is 2.54 mm. Drawing not to scale. Motor sensor configurations Motor PMSM BLDC DC BRUSH ST Sensor (2-ph) ncr. Encoder ncr.
More information7I44 MANUAL 8 CHANNEL RS-422 INTERFACE
7I44 MANUAL 8 CHANNEL RS-422 INTERFACE V1.1 This page intentionally almost blank Table of Contents GENERAL.......................................................... 1 DESCRIPTION.................................................
More information