The speaking controller

Size: px

Start display at page:

Download "The speaking controller"

Candice Cain
6 years ago
Views:

1 Automation Product The speaking controller NET DC 24VD DC 24VD or -1V DC12-24VD ESC POW OK REC VOL DISPLAY UNIT LCD TYPE: AF-1MR-D-... /DC24VD MIC VOICE & REMOTE UNIT AF-MUL/DC12-24VD Q 8A 1 2 REL V EXT SPK WAV Programming via Remote controlling and voice message over telephone network or Cellular phone Remote maintenance and remote operation of the installation Comprehensive function block library Password protected

2 127 The Controller Function blocks Program storage 64kByte Intermediate relays Timer instructions (up to the year 299) Time range,1s-99,99h Counting values System timer back up 1h Type CAP 6 / 12 Inputs digital / analog Type LCD NET Voice module AF-MUL for 98 messages (total max 8min) DC 24VD DC 24VD or -1V AC11-24VA L N N AC11-24VA N L ESC POW OK REC VOL MIC COVER CAP DISPLAY UNIT LCD TYPE: AF-1MT-GD-... /DC24VD TYPE: AF-1MR-A-... /AC11-24VA VOICE & REMOTE UNIT AF-MUL/AC11-24VA Q 2A 1 2 PNP VD Q 8A 1 2 REL V EXT SPK WAV 4 / 8 Outputs Relay / Transistor active

3 The Application The Comat can be programmed by or with the snap-on LCD display with integrated function keys. It is possible to modify time intervals of the function blocks in the existing control program on site directly on to the installation. The LCD display can be connected to the Comat to visualize conditions or may be removed (without voltage) and used on another Comat. The 24V versions of the Comat can also process analogue signals...1v with increments of.1v. All inputs can be used or configured at random as analogue or digital inputs. Function blocks for the comparison of analogue values are available, i.e. to monitor temperature in a heating system. ESC C OK Setting the display Analogue inputs DISPLAY UNIT LCD Programming software Programming the function blocks The voice and remote module The programming software QUICK II allows easy and transparent programming of the Comat with a. QUICK II is based on Windows. 127 function blocks can be stored inside the program memory of the Comat. Stored programs cannot be lost even during a power loss. Therefore back up batteries are not needed. With the simulation tool, the set up can be tested on the before commissioning. Example: Page 4 Control tasks can be solved easily with the function blocks available in the library. Programming codes in a high-level program language are not required. Simply place the corresponding function blocks and link them with other function blocks according to the required control function. The voice module allows the playing of messages through either the built-in or external loud speakers. The voice module also replays phone calls or dials phone numbers to send emergency or status messages. Messages are recorded directly over the built-in microphone or are transferred as *.wav files directly from the.

4 Programming software Quick II Example: Programing environment

5 EXT SPK WAV The Extension module Programming via the MUL voice and remote unit Recording of messages with the NET AF-BC AF-BC AF-MUL Incl. AF-BC AF-MUL Incl. AF-BC AF-D232 AF-RS232 AF-RS232 AF-AUD Programming simulation and monitoring with the. Each Comat can be controlled via a telephone line if connected to the extension module AF-MUL (voice & remote unit). The AF-MUL will answer calls and allows access after the password is accepted. The Comat with the AF-MUL is able to broadcast up to 98 predefinded conditions, for example alarms, over the phone network. The designated phone number is dialled and the recorded message is played over the telephone. The message can also be broadcast over auxiliary loudspeakers. Messages are transferred to the voice module as *.wav files directly from the over the AF-AUD cable.

6 The Types UB 6 INPUTS 4 S UB 12 INPUTS 8S 6/12 Inputs digital AC11-24V AC11-24V AC11-24VA 5/6Hz INPUT L N N UB 1 2 6x 6 AF-1MR-A-... AC11-24V AC11-24VA 5/6Hz L N N UB 1 2 INPUT 12x AF-2MR-A /8 Ouputs relays 8A 25VA 8A 25V Q1 Q2 4x Q4 8A 25V Q1 Q2 8x Q8 AF-1MR-A-CAP/AC11-24V AF-1MR-A-LCD/AC11-24V AF-2MR-A-CAP/AC11-24V AF-2MR-A-LCD/AC11-24V 6/12 Inputs configurable: digital / analog -1V (,1V) DC 24VD DC 24VD or -1V 1 2 AF-1MR-D-... INPUT 6x 6 DC 24VD DC 24VD or -1V 1 2 INPUT 12x AF-2MR-D /8 Outputs relays 8A 25VA 8A 25V Q1 Q2 4x Q4 8A 25V Q1 Q2 8x Q8 AF-1MR-D-CAP/DC24V AF-1MR-D-LCD/DC24V AF-2MR-D-CAP/DC24V AF-2MR-D-LCD/DC24V 4/8 Transistor outputs PNP 2A 24VD 4x PNP 2A 24VD Q1 Q2 Q4 PNP 2A 24VD Q1 Q2 8x Q8 AF-1MT-GD-CAP/DC24V AF-1MT-GD-LCD/DC24V AF-2MT-GD-CAP/DC24V AF-2MT-GD-LCD/DC24V Accessories AF-MUL/AC11-24V Voice and remote unit 1) AF-D232 Programming cable AF-MUL/DC12-24V Voice and remote unit 1) CMS-USB Converter USB-RS 232 AF-RS232 AF-MUL Programming cable AF-MOD Modem AF-BC AF-MUL Bridge connector 2) AF-M232 Modem Interface connector AF-5MUL Audio Cable 2) AF-LCD Display with function keys AF-AUD Audio Cable AF-CAP Cover (instead of AF-LCD) 1) Inclusive AF-BC and 2) Included with AF-MUL AF-CDR1 CD-ROM The Data Operating voltage UB Power consumption Switching power Ambience conditions AF-1 AF-2 AF-MUL AC11-24VA 5/6Hz DC24VD max.1% 3VA/1,5W 5VA/1,5W 8A 25VA 2A 24VD Tu C Tu...55 C AC11-24VA DC12-24VD,8VA Rel. humidity: % (non condensing) Protection IP2

7 ! Kühn Controls AG Notes: You want more information about this product, please call us: tel: 49 () or send us a fax: 49 () , or sales@kuehn-controls.de or visit our Website:

The speaking controller!

The speaking controller! NET DC 24VD DC 24VD or -1V DC12-24VD AF-1MR-D-... /DC24VD AF-MUL/DC12-24VD 25V Programming via snap-on display or with Remote controlling and voice message over telephone network