DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE

Transcription

1 DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE ZENER DIODES RD2.0F to RD82F DESCRIPTION NEC type RD F Series are DHD (Double Heatsink Diode) Construction planar type zener diodes possessing an allowable power dissipation of 1 watt. PACKAGE DIMENSIONS (Unit: mm) φ 0.8 FEATURES DHD (Double Heatsink Diode) Construction Planar process VZ: Applied E24 standard DO-41 Glass sealed package APPLICATIONS Circuits for, Constant Voltage, Constant Current, Wave form clipper, Surge absorber, etc. Cathode indication φ 3.0 MAX. 25 MIN. 5 MAX. 25 MIN. MAXIMUM RATINGS () Power Dissipation (P) 1 W (See Fig. 1) Forward Current (IF) ma Junction Temperature (Tj) 175 C Storage Temperature (Tstg) 65 to +175 C Peak Reverse Power (PRSM) See Fig. 9 The information in this document is subject to change without notice. efore using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D13936EJ3V0DS00 (3rd edition) (Previous No. SC-07A) Date Published June 0 N CP(K) 1982 Printed in Japan

2 ELECTRICAL CHARACTERISTICS (TA = 25 ± 2 C) Type Number Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note 1 ZZ (Ω) Note 2 IR (µa) Suffix MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD2.0F RD2.2F RD2.4F RD2.7F RD3.0F RD3.3F RD3.6F RD3.9F RD4.3F RD4.7F RD5.1F RD5.6F RD6.2F RD6.8F RD7.5F RD8.2F RD9.1F RDF RD11F RD12F Data Sheet D13936EJ3V0DS00

3 Type Number Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note 1 ZZ (Ω) Note 2 IR (µa) Suffix MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD13F RD16F RD18F RD20F RD22F RD24F RD27F RD30F RD33F RD36F RD39F RD43F RD47F RD51F RD56F RD62F RD68F RD75F RD82F Note 1. Tested with pulse ( ms). 2. ZZ is measured at IZ given an very small A.C. Current Signal. Data Sheet D13936EJ3V0DS00 3

4 TYPICAL CHARACTERISTICS () Fig. 1 P-TA RATING Fig. 2 IZ-VZ CHARACTERISTIC Power Dissipation P (W) = 20 mm mm 5 mm Ambient Temperature TA ( C) TYP. Zener Voltage VZ (V) 15 5 RD12F RDF RD8.2F RD7.5F RD6.8F RD6.2F RD5.1F RD4.7F RD3.9F RD3.3F RD2.7F RD2.0F IF (ma) VZ (V) Zener Current IZ (ma) Fig. 3 IZ-VZ CHARACTERISTIC Fig. 4 IZ-VZ CHARACTERISTIC TYP. Zener Voltage VZ (V) RD39F RD36F RD33F RD30F RD27F RD24F RD22F RD20F RD18F IF (ma) PMAX VF (V) Zener Current IZ (ma) TYP. Zener Voltage VZ (V) RD82F RD75F RD68F RD62F RD56F RD51F RD47F RD43F IF (ma) PMAX VF (V) Zener Current IZ (ma) Fig. 5 γz-vz CHARACTERISTIC Fig. 6 γz-vz CHARACTERISTIC VZ Temperature Coefficiency γ Z (%/ C) %/ C 0.06 mv/ C VZ Temperature Coefficiency γ Z (mv/ C) VZ Temperature Coefficiency γ Z (%/ C) %/ C mv/ C VZ Temperature Coefficiency γ Z (mv/ C) Zener Voltage VZ (V) Zener Voltage VZ (V) 4 Data Sheet D13936EJ3V0DS00

5 Fig. 7 ZZ-IZ CHARACTERISTIC Fig. 8 Rth-S CHARACTERISTIC Dynamic Inpedance ZZ (Ω) RD6.8F RD2.0F RD39F RD6.2F RDF RD7.5F RD82F RD5.6F RD4.3F RD20F TYP. RD5.1F RD6.8F RD6.2F RD7.5F RDF 0 Thermal Resistance Rth ( C/W) Junction to ambient = 5 mm S (Thickness = mm) mm 20 mm Zener Current IZ (ma) Size of PC oard S (mm 2 ) Fig. 9 PRSM RATING Fig. 11 POWER DISSIPATION NOMOGRAM Peak Reverse Power PRSM (W) t PRSM Non- Repetitive (incn) 1.0 Heat Sink (mm) Heat Sink 1.5 Transient Thermal Impedance Zth ( C/W) 1 µ 0 µ 1 m m 0 m 1 Time t (s) Fig. Zth CHARACTERISTIC C/W m m 0 m 1 0 Time t (s) 5/8 3/8 2/ /8 3 Lead Length (mm) Heat-Sink Temperature TH ( C) Power Dissipation P (W) Data Sheet D13936EJ3V0DS00 5

6 [MEMO] 6 Data Sheet D13936EJ3V0DS00

7 [MEMO] Data Sheet D13936EJ3V0DS00 7

8 The information in this document is subject to change without notice. efore using this document, please confirm that this is the latest version. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data ooks. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M