ZENER DIODES RD2.0S to RD150S

Transcription

1 DATA SHEET ZENER DIODES RD2.0S to RD150S ZENER DIODES 200 mw 2-PIN SUPER MINI MOLD DESCRIPTION Type RD2.0S to RD150S series are 2 pin super mini mold package zener diodes possessing an allowable power dissipation of 200 mw. PACKAGE DRAWING (Unit: mm) 2.5± ± ± ±0.1 FEATURES Sharp breakdown characteristic VZ: Applied E24 standard Cathode Indication 0.19 APPLICATIONS Circuit for constant voltage, constant current, wave form clipper, surge absorver, etc. 0± ±0.1 ABSOLUTE MAXIMUM RATINGS (TA = 25 C) Power Dissipation P 200 mw Forward Current IF A Reverse Surge Power PRSM 85 W (at t = s/ 1 pulse) Show Fig.12 Junction Temperature Tj 150 C Storage Temperature Tstg 55 to +150 C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D11444EJ6V0DS00 (6th edition) Date Published August 2006 NS CP(K) Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2003

2 <R> ELECTRICAL CHARACTERISTICS (TA = 25 ±2 C) (1/4) Type Number Class Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ (Ω) Note2 IR (μa) MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD2.0S B RD2.2S B RD2.4S B RD2.7S B B B RD3.0S B B B RD3.3S B B B RD3.6S B B B RD3.9S B B B RD4.3S B B B B BX BY RD4.7S B B B B BX BY RD5.1S B B B B BX BY Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. current signal. Remark Suffix B is suffix B1, B2 or suffix B3. 2 Data Sheet D11444EJ6V0DS

3 (2/4) Type Number Class Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ (Ω) Note2 IR (μa) MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD5.6S B B B B BX BY RD6.2S B B B B BX BY RD6.8S B B B B BX BY RD7.5S B B B B BX BY RD8.2S B B B B BX BY RD9.1S B B B B BX BY Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. current signal. Remark Suffix B is suffix B1, B2 or suffix B3. Data Sheet D11444EJ6V0DS 3

4 (3/4) Type Number Class Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ (Ω) Note2 IR (μa) MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD10S B B B B BX BY RD11S B B B B BX BY RD12S B B B B BX BY RD13S B B B B RD15S B B B B RD16S B B B B RD18S B B B B Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. current signal. Remark Suffix B is suffix B1, B2 or suffix B3. 4 Data Sheet D11444EJ6V0DS

5 (4/4) Type Number Class Zener Voltage Dynamic Impedance Reverse Current VZ (V) Note1 ZZ (Ω) Note2 IR (μa) MIN. MAX. IZ (ma) MAX. IZ (ma) MAX. VR (V) RD20S B B B B RD22S B B B B RD24S B B B B RD27S B RD30S B RD33S B RD36S B RD39S B RD43S B RD47S B RD51S B RD56S B RD62S B RD68S B RD75S B RD82S B RD91S B RD100S B RD110S B RD120S B RD150S B Note 1. VZ is tested with pulsed (40 ms). 2. ZZ is measured at IZ by given a very small A.C. current signal. Remark Suffix B is suffix B1, B2 or suffix B3. Data Sheet D11444EJ6V0DS 5

6 TYPICAL CHARACTERISTICS (TA = 25 C) Fig.1 POWER DISSIPATION vs. AMBIENT TEMPERATURE 250 P - Power Dissipation - mw P. C. B. (Glass Epoxy) (30 mm 30 mm 1.6 mm) TA - Ambient Temperature - C Fig.2 ZENER CURRENT vs. ZENER VOLTAGE Fig.3 ZENER CURRENT vs. ZENER VOLTAGE RD2.2S RD2.0S RD2.4S RD2.7S RD3.0S RD3.3S RD3.6S RD3.9S RD6.8S RD7.5S RD8.2S RD9.1S RD10S TA = 25 C RD11S RD12S RD13S IZ - Zener Current - A IZ - Zener Current - A RD4.3S RD4.7S RD5.1S RD5.6S RD6.2S VZ - Zener Voltage - V Data Sheet D11444EJ6V0DS

7 Fig.4 ZENER CURRENT vs. ZENER VOLTAGE Fig.5 ZENER CURRENT vs. ZENER VOLTAGE RD15S RD16S TA = 25 C RD18S RD20S RD22S RD27S RD24S TA = 25 C RD30S Iz - Zener Current - A Iz - Zener Current - A Fig.6 ZENER CURRENT vs. ZENER VOLTAGE Fig.7 ZENER CURRENT vs. ZENER VOLTAGE TA = 25 C RD33S RD36S RD39S RD47S RD43S RD56S RD68S RD82S RD91S RD62S RD75S TA = 25 C RD100S RD110S RD120S Iz - Zener Current - A Iz - Zener Current - A Data Sheet D11444EJ6V0DS 7

8 Fig.8 DYNAMIC IMPEDANCE vs. ZENER CURRENT ZZ - Zener Impedance - Ω RD5.6S RD39S RD24S RD20S RD15S RD10S RD7.5S RD2.0S RD2.4S RD3.0S RD3.9S RD4.7S RD5.1S IZ - Zener Current - ma Fig.9 ZENER VOLTAGE TEMPERATURE COEFFICIENT vs. ZENER VOLTAGE Fig.10 ZENER VOLTAGE TEMPERATURE COEFFICIENT vs. ZENER VOLTAGE Z - VZ Temperature Coefficient - %/ C γ 0.1 %/ C mv/ C RD2.0S to RD39S VZ - Zener Voltage - V Z - VZ Temperature Coefficient - mv/ C γ Z - Zener Voltage Temperature Coefficient - % / C γ %/ C mv/ C RD43S to RD120S Z - Zener Voltage Temperature Coefficient - mv/ C γ 8 Data Sheet D11444EJ6V0DS

9 Fig.11 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS 5000 Zth - Transient Thermal Impedance - C/W RD [ ] S 5 1m 10m 100m C/W P.C.B. (Glass Epoxy) (30 mm 30 mm 1.6 mm) t - Time - s Fig.12 SURGE REVERSE POWER RATINGS 1000 Non-repetitive PRSM - Surge Reverse Power - W PRSM tt 1 tt - Pulse Width - s Data Sheet D11444EJ6V0DS 9

10 The information in this document is current as of August, The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E