Ultrasonic sensors Discrete output Analog output

Transcription

1 Analog output General information Switch or analog outputs Sensing distances up to 6m Stainless steel housing Quick disconnect Index Discrete.... Analog....6 Technical data....8 AC 00 0/98 ULTRASONIC : Pgs.. Analog output: Pgs..7 Technical data: Pgs.8.9 Discount schedule RU.

2 Sensing range: 00 & 000 Adjustable sensing range Catalog number List price Suffix POS Suffix NOS Operating specifications Standard test plate (min. flat surface) Transducer frequency khz Response time ms Hysteresis Repeatability Switching frequency Hz Electrical specifications Supply voltage Current consumption ma Load current ma Voltage drop Short circuit & overload protection Reverse polarity protection LEDs Green Red Mechanical specifications Operating temperature F Storage temperature F Protection IEC Housing material Transducer material ring Housing diameter Approvals CE UL Listed CSA Connection SUD00-M0N-C-POS SUD00-M0N-C-NOS $.00 PNP, Sourcing, Prograable, NO/NC NPN, Sinking, Prograable, NO/NC 00 x % of the set operating distance % of the set operating distance "Fault," object uncertain Switching condition indicator, teaching function, no Stainless steel PUR 0 Connector M SUD000-M0N-C-POS SUD000-M0N-C-NOS $ 0.00 PNP, Sourcing, Prograable, NO/NC NPN, Sinking, Prograable, NO/NC 00 x 00 7 % of the set operating distance % of the set operating distance "Fault," object uncertain Switching condition indicator, teaching function, no Stainless steel PUR 0 Connector M SUD000-M0N-C-POS M.0 X M.0 X Quick disconnect C Type.8 M0.0 X. Quick disconnect C Type.8 M0.0 X. POS Gray POS Gray AC 00 0/98 NOS NOS Gray Gray Note: ULTRASONIC show quick disconnect : pin numbers Pgs.. Note: Analog Wiring output: diagrams Pgs. show.7 quick disconnect pin numbers Technical data: Pgs.8.9 Discount schedule RU.

3 Sensing range: 000 & 6000 Adjustable sensing range Catalog number List price Suffix POS Suffix NOS Operating specifications Standard test plate (min. flat surface) Transducer frequency khz Response time ms Hysteresis Repeatability Switching frequency Hz Electrical specifications Supply voltage Current consumption ma Load current ma Voltage drop Short circuit & overload protection Reverse polarity protection LEDs Green Red Mechanical specifications Operating temperature F Storage temperature F Protection IEC Housing material Transducer material ring Housing diameter Approvals CE UL Listed CSA Connection SUD000-M0N-C-POS SUD000-M0N-C-NOS $ 0.00 PNP, Sourcing, Prograable, NO/NC NPN, Sinking, Prograable, NO/NC 00 x % of the set operating distance % of the set operating distance "Fault," object uncertain Switching condition indicator, teaching function, no Stainless steel PUR 0 Connector M SUD6000-M0N-C-POS SUD6000-M0N-C-NOS $ PNP, Sourcing, Prograable, NO/NC NPN, Sinking, Prograable, NO/NC 00 x % of the set operating distance % of the set operating distance "Fault," object uncertain Switching condition indicator, teaching function, no Stainless steel PUR 0 Connector M SUD000-M0N-C-POS ULTRASONIC : Pgs.. Analog output: Pgs.6.7 Technical data: Pgs.8.9 AC 00 0/98. Discount schedule RU

4 Sensing range: 000 & M.0 X..0 M.0 X.8 M0.0 X..7 M0.0 X..9 Ø Quick disconnect C Type Quick disconnect C Type POS Gray POS Gray NOS Gray NOS Gray Note: show quick disconnect pin numbers Note: show quick disconnect pin numbers AC 00 0/98 ULTRASONIC : Pgs.. Analog output: Pgs..7 Technical data: Pgs.8.9 Discount schedule RU.

5 Analog output Sensing range: 00 & 000 Adjustable sensing range Catalog number SUD00-M0N-C-M SUD000-M0N-C-M List price Suffix M Analog output # current Analog output # voltage Operating specifications Standard test plate (min. flat surface) Transducer frequency khz Response time ms Linearity Repeatability Resolution Span <70 Span 70 Electrical specifications Supply voltage Current consumption ma Short circuit & overload protection Reverse polarity protection LEDs Green Red Mechanical specifications Operating temperature F Storage temperature F Temperature drift Protection IEC Housing material Transducer material ring Housing diameter Approvals CE UL Listed CSA Connection..0 $ Analog 0mA or 0 ma (Load 00Ω) 0 0V or 0 0V (Load 000Ω) 00 x <0.% of full scale <0.% of full scale "Fault," no Span limit A, falling slope Span limit A, rising slope Compensated (0.%/K without temp. compensation) 0 Stainless steel Polyurethane 0 Connector M M.0 X Prograing plug $ Analog 0mA or 0 ma (Load 00Ω) 0 0V or 0 0V (Load 000Ω) 00 x <0.% of full scale <0.% of full scale 0.7 Max. span value Min. span value/ "Fault," no Span limit A, falling slope Span limit A, rising slope Compensated (0.%/K without temp. compensation) 0 Stainless steel Polyurethane 0 Connector M..0 SUD00-M0N-C-M M.0 X Prograing plug Quick disconnect C Type.8 M0.0 X. Quick disconnect C Type.8 M0.0 X. M # V in # V in # # M Note: ULTRASONIC show quick disconnect : pin numbers Pgs.. Note: Analog Wiring output: diagrams Pgs.6 show.7 quick disconnect pin numbers Technical data: Pgs.8.9 # V in # V in # # AC 00 0/98.6 Discount schedule RU

6 Analog output Sensing range: 000 & 6000 Adjustable sensing range Catalog number SUD000-M0N-C-M SUD6000-M0N-C-M List price Suffix M Analog output # current Analog output # voltage Operating specifications Standard test plate (min. flat surface) Transducer frequency khz Response time ms Linearity Repeatability Resolution Span <70 Span 70 Electrical specifications Supply voltage Current consumption ma Short circuit & overload protection Reverse polarity protection LEDs Green Red Mechanical specifications Operating temperature F Storage temperature F Temperature drift Protection IEC Housing material Transducer material ring Housing diameter Approvals CE UL Listed CSA Connection $ Analog 0mA or 0 ma (Load 00Ω) 0 0V or 0 0V (Load 000Ω) 00 x <0.% of full scale <0.% of full scale 0.7 Max. span value Min. span value/ "Fault," no Span limit A, falling slope Span limit A, rising slope Compensated (0.%/K without temp. compensation) 0 Stainless steel Polyurethane 0 Connector M Prograing plug M.0 X $ Analog 0mA or 0 ma (Load 00Ω) 0 0V or 0 0V (Load 000Ω) 00 x <0.% of full scale <0.% of full scale 0.7 Max. span value Min. span value/ "Fault," no Span limit A, falling slope Span limit A, rising slope Compensated (0.%/K without temp. compensation) 0 Stainless steel Polyurethane 0 Connector M..0 SUD000-M0N-C-M M.0 X Prograing plug.8 M0.0 X. AC 00 0/98 Quick disconnect C Type M.7 M0.0 X. # V in # V in # # Quick disconnect C Type M Note: ULTRASONIC show quick disconnect : pin numbers Pgs.. Note: Analog Wiring output: diagrams Pgs. show.7 quick disconnect pin numbers Technical data: Pgs.8.9 #.9 Ø7.0 V in # V in # # Discount schedule RU.7

7 Technical data sensors switching output To set the switching points: The ultrasonic sensor is provided with a switching output with two teachable switch points. These are set up by applying the supply voltage -V or +V to the teaching input. The B B supply voltage should be applied to the teaching input for at least second. During the teaching process the LEDs indicate whether the sensor has recognized the target. The switch points A and A are taught by voltage -V B and +V B respectively. Five functions can be set:. Window mode, normally open function. Window mode, normally closed function. One switch point, normally open function. One switch point, normally closed function. Detection of presence of object. Teach window operation, normally open function Set target at near switch point Teach switch point A with -V B Set target at far switch point Teach switch point A with +V B. Teach window operation, normally closed function Set target at near switch point Teach switch point A with +V B Set target at far switch point Teach switch point A with -V B. Teach one switch point, normally open function Set target at near switch point Teach switch point A with +V B Cover sensor with the palm of the hand, or remove all objects from the detection range of sensor Teach switch point A with -V B. Teach one switch point, normally closed function Set target at near switch point Teach switch point A with -V B Cover sensor with the palm of the hand, or remove all objects from the detection range of sensor Teach switch point A with +V B. Teach detection of presence of object Cover sensor with the palm of the hand, or remove all objects from the detection range of sensor Teach switch point A with -V B Teach switch point A with +V B Presetting of the switch points: A: Near range A: Nominal range Note: A prograing unit SZP/PROG is obtainable for the basic setting of the switch points and output functions. Synchronization: In order to suppress mutual interference, the sensor has the ability to operate via one synchronized input. If the input is unswitched, the sensor operates at an internally generated pulse rate. The sensor can be synchronized by an externally triggered square wave pulse. One synchronizing pulse at the synchronization input enables one measuring cycle to be completed. The pulse width must be greater than 00µs. The sensor is enabled on the falling edge of the square wave. The state of the switching output changes after the switching threshold has been exceeded five times, as determined internally by five measurements. A low level s, or an open synchronization input results in normal operation of the sensor. Synchronization cannot take place during teaching and vice versa.. Multiple sensors are controlled with the same synchronizing signal. The sensors operate on the same pulse.. The synchronizing pulses are fed cyclically to only one sensor at a time. The sensor operates in multiplex mode. A high level at the synchronization input deactivates the sensor. Operating condition indications LED green LED red LED yellow Switch point teaching Object detected flashing off off No flashing off on Object uncertain (teaching invalid) off flashing off Normal operation on off switch condition Interference (e.g. comp. air) off flashing last condition Prograed switching output function Window operation, normally open function A < A: A A Window operation, normally closed function A < A: SZP/PROG Prograing unit A A One switch point, normally open function A : A One switch point, normally open function A : A ULTRASONIC : Pgs.. Analog output: Pgs.6.7 Technical data: Pgs.8.9 AC 00 0/98.8 Discount schedule RU

8 Technical data Analog output sensors analog output To set the function These ultrasonic sensors are equipped with a four pin temperature / prograing plug which can be inserted in directions that have the following function: A Program evaluation limit A A Program evaluation limit A E/E Changeover between falling/rising slope T Temperature compensation (Normal operation) Prograing Only possible under following conditions: The prograing plug is not inserted Less than min. after power on After this time the sensor works without temperature compensation. Prograing procedure Switch power supply off Switch power supply on (reset) Evaluation limit A or A Position target at A or A Insert prograing plug at position A or A respectively Green LED flashes when target is recognized Remove prograing plug (saving of the target position) function Insert prograing plug in position E or E: Changes output from falling to rising edge or vice versa The yellow LEDs indicate the output function: E Falling slope E: Rising slope Remove prograing plug Temperature compensation Insert prograing plug in position T. Resolution The propagation time is measured within the sensors with a resolution of µs (corresp. to approx. 0.7). The highest resolution of 0.7 is achieved when the difference between evaluation limits A and A is less than 70 (096 x 0.7). For larger ranges the resolution is (A-A) / 096 (A, A in ). LED indicators Displays depending upon Dua LED Dua LED LED LED the prograing plug position Green Red A A Program evaluation limit Object detected Flashing OFF Flashing OFF Object not detected OFF Flashing Flashing OFF Program evaluation limit Object detected Flashing OFF OFF Flashing Object not detected OFF Flashing OFF Flashing Program slope Falling slope ON OFF Flashing OFF Rising slope ON OFF OFF Flashing Normal operation with Temperature compensation ON OFF ON/OFF ON/OFF Prograing plug removed or shorted out OFF ON ON/OFF ON/OFF Disturbance OFF Flashing Last status Last status (e.g. compressed air) ON: Object in evaluation range, OFF: No object in evaluation range Analog output in accordance with E/E prograing: E E 0 ma/0v ma/0v near distance of evaluation A far distance of evaluation ma/0v 0 ma/0v A AC 00 0/98 ULTRASONIC : Pgs.. Analog output: Pgs..7 Technical data: Pgs.8.9 Discount schedule RU.9