Notice according to GNU/GPL-Version 2

Transcription

1 1

2 Copyright Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. For more information about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our website for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. Notice according to GNU/GPL-Version 2 This product includes software that is subject to the GNU/GPL-Version 2. You find the text of the license on the product cd/dvd. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code. Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan 3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL : , FAX : , sales@edimax.com.tw 2

3 Multi-Language QIG on the CD Český Deutsch Español Français Italiano Magyar Nederlands Polski Português Русский Romania Türkçe Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači. Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation. Incluido en el CD el G.R.I. en Español. Veuillez trouver l français G.I.R ci-joint dans le CD. Incluso nel CD il Q.I.G. in Italiano. A magyar telepítési útmutató megtalálható a mellékelt CD-n. De nederlandse Q.I.G. treft u aan op de bijgesloten CD Skrócona instrukcja instalacji w języku polskim znajduje się na załączonej płycie CD. Incluído no CD o G.I.R. em Portugues. Русский: Найдите Q.I.G. на pусскoм языке на приложеном CD. Cd-ul cuprinde Ghid de instalare rapida in limba romana. Ü rün ile beraber gelen CD içinde Türkçe Hızlı Kurulum Kılavuzu'nu bulabilirsiniz. 3

4 Thank you for purchasing this wireless projector server! This wireless projector server supports both Windows and Mac OS. If your projector server does not work with Mac OS, please download the latest firmware at Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): Packaging List Item No. Name Quantity 1 Wireless Projector Server V Power Adapter 1 3 Ethernet Cable 1 4 Remote Control 1 5 Quick Installation Guide 1 6 CR-2302 Lithium Battery 1 (installed in the remote control) 7 Rubber Foot Pad 4 8 CD (Multi-language User Guide & Manual) 1 9 3dBi Antenna 2 4

5 Front Name PWR WPS Remote control receiver PWR LED LAN LED WLAN LED USB AF port USB BF port Description Switches this projector server on and off WPS (Wi-Fi Protected Setup) activation button IR signal receiver (for the remote control) Indicates whether this wireless projector server is on Indicates whether a LAN device is connected Indicates whether there is wireless LAN activity Connects keyboard / mouse Connects a computer to the projector server to display the contents of the computer on the video display directly 5

6 Back Name 12VDC Reset Antennas (left and right) VGA Audio Output LAN External IR Description Connects to the supplied power adapter Press and hold this button for 5 seconds to reset the projector server to factory defaults For wireless signal transmission Connects to any VGA-compatible display Connects to speakers or an audio amplifier 10/100/1000Mbps Ethernet port Connects to an IR extender cable 6

7 Remote Control Battery cover Name Black out Menu Page down Page up Prev. Next Battery cover Description Press this button to black out the contents on the external display; press this button again to resume Switches between a computer s display content and the configuration menu Equivalent to the Left key on a computer s keyboard Equivalent to the Right key on a computer s keyboard Switches to the previous presenter or equivalent to the Up key on a computer s keyboard Switches to the next presenter or equivalent to the Down key on a computer s keyboard Press to select the presenter in the projector server s configuration menu Press the battery cover and push it backwards to open the battery compartment (to install or remove the CR 2032 lithium battery) 7

8 Projector Server Setup If you plan on putting the projector server on a desk or other horizontal surfaces, stick the foot pads on the 4 locations as indicated is the picture. Skip this step if you plan on hanging the projector server on the wall. Connect the Ethernet cable to the LAN port (this port is labeled as LAN and is located at the back of this projector server). Connect the projector server to an amplifier or a set of speakers via the audio port. You can skip this step if you do not have an amplifier or speakers. 8

9 Connect the projector server to a video display via the VGA connector. Adjust the antennas so they are perpendicular to the ground. Connect the power adapter to an electrical outlet 9

10 Insert the power connector into the 12V socket at the back of the projector server. Press the Power button located at the front of the projector server. Check the Power LED. If it is not on, refer to the Troubleshooting section in the user manual. 10

11 Using the Projector Server Press the Power button at the front of the projector server. You should be able to see this image on the screen. Please wait for about 60 seconds for the projector server to start up. Projector server will acquire an IP address from the DHCP server on your LAN automatically, and the IP address will be displayed at the bottom-left corner of the display of attached projector or monitor. If there s no DHCP server on your LAN, projector server will use as default IP address. The projector server s IP addresses can be found on the lower-left corner of the connected display. The login code can be found on the lower-right corner of the connected display. 11

12 Connecting to the projector server wirelessly: Search for the projector server s SSID and establish a connection. Then open your browser and key in the WLAN IP address. (SSID: Edimax Projector) (IP address: ) Connecting to the projector server via Ethernet: If you wish to connect to the WP-S1300 via an Ethernet cable, please refer to chapter 2-3 of the manual to set up an IP address for the computer first. (Wired IP address: ) Click the Start button to download the client software. 12

13 When you are prompted to download the software, click Run. Click Run to start software installation. If you see this message, click Unblock. (You must click Unblock or client utility will become unusable). 13

14 When the installation is complete, an icon named WPS will appear on your computer s desktop: The client software will search for the projector server connected to your local area network, and the projector server s SSID will be displayed in the Projector SSID field. Enter a user name (can be anything that allows others to identify you), and the login code displayed on the screen. The projector server will obtain your user name from your computer automatically. Note : If the display resolution of your computer is not 1024 x 768, your PC resolution will be changed. Click to start presentation. The display content of your computer will be displayed on projector / monitor. Click 1, 2, 3, or 4 to display at a specific display area (see user manual for detailed instruction). 14

15 To stop presentation, click button. Note: Please refer to the user manual in the CD-ROM for more detailed information on Internet connection type and other settings. 15

16 Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (2006/95/EC). Equipment : Wireless b/g/n Projector Server Model No. : WP-S1300 The following European standards for essential requirements have been followed: Spectrum : ETSI EN V1.7.1( ) EMC : EN V1.8.1(2008-4) EN V2.1.1( ) EMF : EN : 2002 Safety (LVD) : IEC :2005 (2 nd Edition) EN : 2006+A11:2009 Edimax Technology Co., Ltd. No. 3, Wu Chuan 3 rd Road, Wu-Ku Industrial Park. Taipei Hsien, Taiwan Date of Signature : January,2011 Signature : Printed Name : Albert Title : Director Edimax Technology CO., LTD. 16

17 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communications Commission (FCC) Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. The equipment version marketed in US is restricted to usage of the channels 1-11 only. R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries not intended for use None A declaration of conformity is available on 17

18 18