Easy Installation Guide

Transcription

1 Easy Installation Guide Remote Engineer Router ServiceGate Remote Engineer B.V. De Parse 11, 8491 PJ, Akkrum The Netherlands

2 Package Contents ServiceGate router Antenna WiFi DC Connector CAT5 LAN Cable GPIO Connector 2

3 Step 1: Connect Your Equipment 1. Connect the Ethernet cable from your cable or DSL modem to the WAN port on your RE-Router. 2. Connect one or more PCs to any of the four LAN ports on the RE-Router with RJ-45 Ethernet cables. 3. Connect the power connector to the power port on the RE-Router and to a surge protector or other source of power. Give the RE-Router 60 seconds to boot Wifi antenna 2. 2 USB ports 3. 4 Fast Ethernet LAN ports 4. 1 FastEthernet port for WAN/internet 5. DC power (9-48V) connector 6. RS 232 /RS

4 Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. We recommend that you use a wired computer that is plugged into the RE-Router with an Ethernet cable for initial configuration. 1. Launch the web browser on the computer that you re going to use to configure the RE-Router. NOTE: The computer used to configure the RE-Router should be set to obtain an IP address automatically using a DHCP server. 2. Open your web browser and then type in its address field, and press Enter. 3. The RE-Router will open a window, prompting you to enter a User ID and Password. Enter Admin as the User name and enter REAdmin in the password field. 4. The RE-Router main screen will open. 4

5 Step 2: Configure Your Router 5. Choose the type of connection to be used. Choices Automatic Configuration DHCP will work in most cases. Setting the IP to a static address is also possible(please consult system administrator before setting this address) With the static configuration WAN IP, Subnet, Gateway and at least one DNS address. 5

6 Congratulations! Your RE-Router is installed and the basic setup has been configured. For advanced settings and more detailed information, consult the User Manual. Remote Engineer Technical Support Remote Engineer offers Technical Support between the hours of 8am-6pm (GMT) Monday to Friday for this product. Customers in Europe can obtain Technical Support using the following information: (0) The constantly evolving state of wireless products and operating systems requires Remote Engineer to occasionally release updated software to take advantage of new technologies and to comply with industry standards. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Remote Engineer website: 6

7 Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of compliance with the R&TTE Directive 1999/5/EC: EN : 2001 Safety of Information Technology Equipment EN V1.6.1: 2004 Technical requirements for spread-spectrum radio equipment EN V1.4.1: 2002, EN V1.2.1: 2002 EMC requirements for spread-spectrum radio equipment. EN 50371: 2002 Intended use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states. EU Countries intended for use This device is intended for indoor Home and office use in the following countries: Austria, Belgium, Germany, Denmark, Spain, Greece, France, Finland, Italy, Ireland, Luxembourg, The Netherlands, Portugal, Sweden, United Kingdom, Cyprus, Czech Republic, Estonia, Hungry, Latvia, Lithuania, Malta, Poland, Slovak Republic and Slovenia. The device is also authorised for use in all EFTA member states Iceland, Liechtenstein, Norway and Switzerland. EU countries not intended for use None Potential restrictive use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France, Belgium and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links. In Belgium there is a restriction in outdoor use. The frequency range in which outdoor operation in Belgium is permitted is MHz. This device may not be used for setting up outdoor radio links in France. For more information see and/or 7

8 Warranty Statement Remote Engineer products come with a 1-year limited warranty from the date of purchase. Remote Engineer warrants in good operating condition for the warranty period. This warranty does not include non-remote Engineer installed components. If the Remote Enigneer product malfunctions during the warranty period, Remote engineer will, at its discretion, repair or replace the product at no charge, provided the product has not been subjected to misuse, abuse or non-remote Engineer authorized alterations, modifications or repairs. When returning a product, include your original proof of purchase. Return requests cannot be processed without proof of purchase. Shipment of returned product to Remote Engineer is the responsibility of the purchaser. All expressed and implied warranties for the Remote Engineer product line including, but not limited to, the warranties of merchantability and fitness for a particular purpose, are limited in duration to the above period. Under no circumstances shall Remote Engineer be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, the Remote Engineer products. Remote Engineer reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Important Notice Please have your proof of purchase receipt to get warranty support. All defective products shall be returned with a copy of proof of purchase. In no event shall Remote Engineer s liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation Remote Engineer does not Remote Engineer B.V. De Parse PJ Akkrum, The Netherlands Tel: +31(0) sales@remoteengineer.eu Copyright 2018 Remote Engineer B.V. All Rights Reserved. 8