MI 2792A PowerQ4 Plus

Transcription

1 Ws E Plu N PowerQ MI 2792 PowerQ Plus Best Buy Class Featured Power Qualitynalyser! Now with GPS Module in the set! The MI 2792 PowerQ Plus is top of the range power quality analyser. With it s current and voltage channels it is suitable for locating, predicting and troubleshooting of problems in three and in single phase power distribution systems. ll current channels have the ability to automatically recognize clamps whose range can be set on the instrument. Rugged design makes it appropriate for field use. It can operate up to 15 hours on a single battery charge. Parameters of the instrument can be set directly on the instrument, via the PowerView software or remotely true the optional GPRS modem connection. It is compliant with power quality standard IEC Class, and it has a predefined recorder profile for EN survey. MESURING FUNCTIONS: Voltage: TRMS, peak, crest factor (-channel); Current: TRMS, peak, crest factor (-channel); Power (active, reactive, apparent) Power factor, cos ϕ; Unbalance, flicker measurement; Harmonic and interharmonic analysis up to 50th harmonics, THD measurement; Energy (active, reactive, generated, consumed); Power quality analysis according to EN 50160; Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); Inrush currents monitoring and recording; Waveform displaying, snapshot and recording; Transients recording; Power quality analysis according to EN 50160; Recording up to 10 adjustable alarms; Temperature measurement. PPLICTION: Power quality assessment and troubleshooting in low and middle voltage electrical systems. Checking power correction equipment performance. Harmonics spectrum analysis for selection of harmonic filters. UPS, voltage generators and regulators checking and troubleshooting. Voltage, current, power monitoring and recording. Consumption profile recording. IEC CLSS IEC Measurement aggregation over time intervals ggregation algorithm Magnitude of the Supply L-N Voltage magnitude L-L Voltage magnitude Dips and Swells L-N Voltage magnitude L-L Voltage magnitude Real time clock uncertainty Frequency Flicker* Interruptions Unbalance Voltage Harmonics Voltage Interharmonics Mains signalling voltage * Class in range 9 51 Hz, see Instruction Manuals for details. STNDRDS: Safety: EN EMC: EN Measurements: IEC Class ; IEEE 18; IEC ; IEC Class I; IEC ; EN Class S S S

2 Technical specification Ordering information: Standard set Part No. MI 2792 Function C Voltage inputs Frequency range Vrms L - N ( Vrms L - L) of nominal voltage (Unom: Vrms), 100 mv Hz C Current inputs 50.0 mvrms... 2 Vrms Current measuring (depending on clamps) range 100 mv 0.25% of reading Function Measuring range ccuracy Frequency Hz 2 mhz ±10 mhz Power (W, V, VR) k M digits ±0.02 Power factor ±0.02 cos ϕ ±0.02 Harmonics analysis up 50 th component THD Voltage dips and swells evaluation Magnitude Duration Recording Integration period (IP) Maximum number of signals Communication ports Display Memory module Voltage supply Over voltage category Protection class Dimensions Weight UhN < 1% Unom 1% Unom < UhN < 20% Unom IhN < 10% IN 10% IN < IhN < 100% IN 0 % Unom < THDU < 20% Unom 0 % IN < THDI < 100% IN 100 % IN < THDI < 200% IN V 30 ms... 7 days s 52, 100 mv 1 ms 0.15 % Unom 5 % UhN 0.15 % IN 5 % IhN ±0.3 ±0.6 ± % Unom ± 1 cycle RS 232, USB Graphic LCD with backlight, 320 x 200 dots 8 MB Flash 230 VC or 6 x 1.2 V NiMH rechargeable batteries, size 1000 V / CT III; 600 V / CT IV double insulation 220 x 115 x 90 mm 0.65 kg Instrument PowerQ Plus 1-phase flexible current clamps 3000 / 300 / 30 ( 1227), pcs GPS reciver Test probe, red, 2 pcs Test probe (CT II), red, 3 pcs Test probe (CT II), black, 1 pcs Crocodile clip, red, 3 pcs Crocodile clip, black, 1 pcs Crocodile clip, green, 1 pcs Voltage measurement lead, red, 3 pcs Voltage measurement lead, black, 1 pcs Voltage measurement lead, green, 1 pcs PC SW PowerView RS232 and USB cables Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate Optional accessories: Photo Order No. cc. description Small soft carrying bag Current clamp 1000 /1 V Current transformer 5 /1 V Connection cable for current clamp 100 / 1 V / 1 V clamp 2000/200/20 / 1 V clamp 3000/300/30 / 1 V Current clamp 1000 / 100 / 5 / 1V 1-phase flexible current clamp 3000 / 30 / 30 /1V 1356 GPRS modem S 201 Safety fuse adapter, 3 pcs Measuring and Regulation Equipment Manufacturer METREL d.d. Ljubljanska 77 SI-135 Horjul Tel: (0) Fax: (0) metrel@metrel.si S 2015 Safety flat clamp, pcs Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.

3 MI 2792 PowerQ Plus ESY TO USE SUPPORT OF GPRS MODEM QULITY GRPHICL DISPLY NEW PowerQ Plus PC SW PowerView S STNDRD SET CURRENT ND VOLTGE CHNNELS INTERHRMONICS ND MINS SIGNLLING The MI 2792 PowerQ Plus is top of the range power quality analyser. With it s current and voltage channels it is suitable for locating, predicting and troubleshooting of problems in three and in single phase power distribution systems. ll current channels have the ability to automatically recognize clamps whose range can be set on the instrument. Rugged design makes it appropriate for field use. It can operate up to 15 hours on a single battery charge. Parameters of the instrument can be set directly on the instrument, via the PowerView software or remotely true the optional GPRS modem connection. It is compliant with power quality standard IEC Class S/, and it has a predefined recorder profile for EN survey. KEY FETURES: voltage channels with wide measurement range: Vrms (CT III / 1000 V). current channels with support for automatic clamp recognition and on instrument range selection. Compliance with power quality standard IEC Class S/. Predefined recorder profile for EN survey. Power measurements compliance with IEC and IEEE 18. Simultaneous 8 channels - 16 bit D conversion for accurate power measurements (minimal phase shift error). Simple to use and powerful recorder with 8 MB of memory and possibility to record up to 52 different power quality signatures. Interharmonics and mains signalling measurement and recording. Temperature probe for measuring the temperature of the tested transformer, capacitor bank, etc. Faster troubleshooting due to on-screen displaying of trends and captured events, while recording is performed in the background. -quadrant measurements (generator and load with capacitive or inductive characters). Powerful troubleshooting tools: transient, fast, and waveform recorder. Voltage events and user defined alarms capture. Internal memory allows recording up to weeks. Instrument or a group of them can be remotely controlled and programmed via GPRS modem 15 hour of autonomous (battery) supply. PowerView is a companion PC Software which provides easiest way to download, view and analyze measured data and print test reports. PPLICTION: Power quality assessment and troubleshooting in low and middle voltage electrical systems. Checking power correction equipment performance. Harmonics spectrum analysis for selection of harmonic filters. UPS, voltage generators and regulators checking and troubleshooting. Voltage, current, power monitoring and recording. Consumption profile recording. RoHS COMPLINT 2002 / 95 / EC MESURING FUNCTIONS: Voltage: TRMS, peak, crest factor (-channel); Current: TRMS, peak, crest factor (-channel); Power (active, reactive, apparent) Power factor, cos ϕ; Unbalance, flicker measurement; Harmonic and interharmonic analysis up to 50 th harmonics, THD measurement; Energy (active, reactive, generated, consumed); Power quality analysis according to EN 50160; Capturing and recording of power supply events (shutdowns, interruptions, swells, dips); Inrush currents monitoring and recording; Waveform displaying, snapshot and recording; Transients recording; Power quality analysis according to EN 50160; Recording up to 10 adjustable alarms; Temperature measurement. STNDRDS: Safety: EN EMC: EN Measurements: IEC Class S; IEEE 18; IEC ; IEC Class II; IEC ; EN 50160

4 Technical specification Ordering information: Standard set Part No. MI 2792 Function C Voltage inputs Frequency range C Current inputs Current measuring range Vrms L - N ( Vrms L - L) 0.2% of reading, 100 mv Hz 50.0 mvrms... 2 Vrms (depending on clamps) 100 mv 0.25% of reading Function Measuring range ccuracy Frequency Hz 2 mhz ±10 mhz Power (W, V, VR) k M digits ±0.02 Power factor ±0.02 cos ϕ ±0.02 Harmonics analysis up 50 th component THD Voltage dips and swells evaluation Magnitude Duration Recording Integration period (IP) Maximum number of signals Communication ports Display Memory module Voltage supply Over voltage category Protection class Dimensions Weight UhN < 3% Unom 3% Unom < UhN < 20% Unom IhN < 10% IN 10% IN < IhN < 100% IN 0 % Unom < THDU < 20% Unom 0 % IN < THDI < 100% IN 100 % IN < THDI < 200% IN V 30 ms... 7 days s 52 RS 232, USB, 100 mv 1 ms Graphic LCD with backlight, 320 x 200 dots 8 MB Flash 0.15 % Unom 5 % UhN 0.15 % IN 5 % IhN ±0.3 ±0.6 ± VC or 6 x 1.2 V NiMH rechargeable batteries, size 1000 V / CT III; 600 V / CT IV double insulation 220 x 115 x 90 mm 0.65 kg 0.5% of reading ±20 ms Instrument PowerQ Plus 1-phase flexible current clamps 3000 / 300 / 30 ( 1227), pcs Test probe, red, 3 pcs Test probe, black, 1 pcs Crocodile clip, red, 3 pcs Crocodile clip, black, 1 pcs Crocodile clip, green, 1 pcs Voltage measurement lead, red, 3 pcs Voltage measurement lead, black, 1 pcs Voltage measurement lead, green, 1 pcs PC SW PowerView RS232 and USB cables Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate Optional accessories: Photo Order No. cc. description Small soft carrying bag Current clamp 1000 /1 V Current transformer 5 /1 V Connection cable for current clamp 100 / 1 V 5 / 1 V clamp 2000/200/20 / 1 V clamp 3000/300/30 / 1 V Current clamp 1000 / 100 / 5 / 1V 1-phase flexible current clamp 3000 / 30 / 30 /1V 1355 GPS receiver 1356 GPRS modem S 201 Safety fuse adapter, 3 pcs Measuring and Regulation Equipment Manufacturer METREL d.d. Ljubljanska 77 SI-135 Horjul Tel: (0) Fax: (0) metrel@metrel.si S 2015 Safety flat clamp, pcs Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.

5 MI 2592 PowerQ NEW Powerfull, high-end -channel power quality analyser with extraordinary price-performance ratio The MI 2592 PowerQ is a handheld, simple to use, portable power quality analyser with four current and four voltage measuring channels. Integrated in rugged housing and packed with powerful functions it can be effectively used for monitoring, troubleshooting and analysing of power quality conditions in power distribution networks either in industry or utilities. The PowerQ is the first handheld power quality analyser which is compliant with power quality standard IEC Class S and standard IEC Powerful PC Software package PowerView comes delivered as part of a standard set and enables downloading, analysing of recorded data and printing of professional test reports. Trough a simple but powerful interface PowerView helps to find recorded data quickly and allows to make complex analysis and data comparison. FETURES: voltage channels with wide measurement range: Vrms (CT III / 1000 V). current channels with support for automatic clamp recognition. Simultaneous measurement and recording of basic power quality parameters. (U, I, P, Q, S, PF, cos ϕ, THD). Power quality analysis according to EN including flicker measurement and standardized report printout in graphic and table form. -quadrant measurements (generator and load with capacitive or inductive character). 509 parameters can be monitored or recorded simultaneously. 8 MB of internal memory space allows recording over weeks. PowerQ is compliant with power quality standard IEC Class S. Power measurements comply with IEC and IEEE 18. Large LCD display, 320x200 dots, with backlight. On-line Scope, Trend and Metering modes. Flexible clamps (without additional supply) are included in the standard set. Simultaneous 8 channels - 16 bit D conversion for accurate power measurements (minimal phase shift error). 15 hours of autonomous (battery) supply. Powerful PC SW PowerView enables downloading, view, analysis of recorded data and professional report creation. PPLICTION: Power quality assessment and troubleshooting in low and middle voltage electrical systems. Checking power correction equipment performance. Harmonics spectrum analysis for selection of harmonic filters. UPS, voltage generators and regulators checking and troubleshooting. Voltage, current, power monitoring and recording. Consumption profile recording. MESURING FUNCTIONS: Voltage: TRMS, peak, crest factor (-channel) Current: TRMS peak, crest factor (-channel) Power (active, reactive, apparent) Power factor, cos ϕ Unbalance, flicker measurement Harmonic analysis up to 50 th harmonics, THD measurement Energy (active, reactive, generated, consumed) Power quality analysis according to EN Capturing and recording of power supply events (shut-down s, interruptions, swells, dips) Inrush currents monitoring and recording Recording up to 10 adjustable alarms Waveform displaying and snapshot STNDRDS: Instrument is developed and manufactured in accordance with following standards: Safety: EN EMC: EN Measurements: IEC/EN Class S; IEC/EN ; IEC/EN Class II; IEC/EN ; IEEE 18; IEC/EN ; IEC/EN Class or Class S*; EN 50160

6 Technical specification Ordering information: Standard set Part No. MI 2592 Function C Voltage inputs Frequency range C Current inputs Current measuring range Vrms L - N ( Vrms L - L) 0.2% of reading, 100 mv Hz 20.0 mvrms... 2 Vrms (for current clamp 1227) 0.1 mv (0.1 for current clamp 1227) 0.25% of reading Function Measuring range ccuracy Frequency Hz 2 mhz ±10 mhz Power (W, V, VR) k M digits ±0.5 % of reading Power factor ±0.02 cos ϕ ±0.02 Harmonics analysis up 50 th component THD Voltage dips and swells evaluation Magnitude Duration Recording Integration period (IP) Maximum number of signals Communication ports Display Memory module Voltage supply Over voltage category Protection class Dimensions UhN < 3% Unom 3% Unom < UhN < 20% Unom IhN < 10% IN 10% IN < IhN < 100% IN 0 % Unom < THDU < 20% Unom 0 % IN < THDI < 100% IN 100 % IN < THDI < 200% IN V 30 ms... 7 days s 509 RS 232, USB, 100 mv 1 ms Graphic LCD with backlight, 320 x 200 dots 8 MB Flash 0.15 % Unom 5 % UhN 0.15 % IN 5 % IhN ±0.3 ±0.6 ± % of reading ±20 ms 230 VC or 6 x 1.2 V NiMH rechargeable batteries, size 1000 V / CT III; 600 V / CT IV double insulation 220 x 115 x 90 mm Instrument PowerQ 1-phase flexible current clamps 3000 / 300 / 30 ( 1227), pcs Test probe, red, 3 pcs Test probe, black, 1 pcs Crocodile clip, black, 1 pcs Crocodile clip, red, 3 pcs Voltage measurement lead, red, 3 pcs Voltage measurement lead, black, 1 pcs Voltage measurement lead, green, 1 pcs PC SW PowerView RS232 and USB cables Power supply adapter 1.2 V NiMH rechargeable battery, 6 pcs Soft carrying bag Instruction manual Calibration certificate Optional accessories: Photo Order No. cc. decription Small soft carrying bag Current clamp 1000 /1 V Current transformer 5 /1 V Connection cable for current clamp 100 / 1 V Weight 0.65 kg / 1 V 1179 clamp 2000/200/20 / 1 V 1257 clamp 3000/300/30 / 1 V S 201 Safety fuse adapter, 3 pcs S 2015 Safety flat clamp, pcs Measuring and Regulation Equipment Manufacturer METREL d.d. Ljubljanska 77 SI-135 Horjul Tel: (0) Fax: (0) metrel@metrel.si Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery. Subject to technical change without notice.