Input Voltage VAC, 50 / 60 Hz. Input Power 2W - 12W Factory Programmable *2W - 4W Non-dimming

Transcription

1 FEATURES Plug-and-play design allows for any combination of 1, 1.5 and 4 foot modules to be installed for up to 100 from a single power feed. Luminaires can be installed in a variety of configurations: linearly, around corners, or in curved installations. Both inside and outside striation free corners are available in ranges of degrees for continuous lighting. Prefabricated cove mounting channel reduces installation time and cost, while keeping the small form factor. Easily connects to the building s power source ( VAC, 50 / 60 Hz) via entry cable provided. Strict 2-Step MacAdam Ellipse binning. Each fixture is photometrically tested and serialized for traceability. ELECTRICAL SPECIFICATIONS Input Voltage VAC, 50 / 60 Hz Input Power 2W - 12W Factory Programmable *2W - 4W Non-dimming Max. Load 120 VAC. 277 VAC. Startup/Operating: -20 C to +40 C Temperature Storage: -30 C to +60 C Relative Humidity: 10-90% (non-condensing) Dimming >5% via 0-10 VDC Life 60,000 hours to L70 PHYSICAL Extruded Aluminum Housing/ UV Stabilized Polycarbonate Lens. IP50 Rating Weight: 1Ft:.87lb, 1.5Ft:1.31lb, 4Ft: 3.48lbs. Corner Weight: 1.69lb PERFORMANCE POLAR PLOT 98.7 lm/w 83 CRI (90+ Available) 3000K LUMEN DATA LUMEN FACTOR MAX RUN/FEED System Watts/Ft Delivered Lumens/Ft 83 CRI 92 CRI CCT Output Factors Multiplier 2700K K K K K K K 1.05 Watts Max. Run Length POWER 120VAC 277VAC 2 240Ft 270Ft 3 150Ft 270Ft 4 100Ft 270Ft 5 90Ft 220Ft 6 75Ft 180Ft 7 65Ft 160Ft 8 60Ft 120Ft 9 50Ft 120Ft 10 45Ft 100Ft 11 45Ft 95Ft 12 40Ft 90Ft SPECIFICATION CODE BUILDER Series Power Color CRI Mounting Cable Geometry Orientation CP 02W* 27K K S - Standard+82 SF - Surface Fixed Mount SC - Straight S- Ft. IC - Inside Corner 03W* 30K K H - High92+ SA - Surface Adj. Mount RT - Right Angle L- x Ft. OC - Outside Corner 04W* 35K K WF - Wall Mount Flat Front++ U- x x Ft. 05W 40K K GF - Gypsum Flat Front R- x Ft. CP Compose 06W 45K K K1 - Gypsum Knife Edge 30 0 C- Custom + 07W 50K K K2- Gypsum Knife Edge 40 0 Geometry Direction 08W 65K K AC - ACT S-Straight 09W For Other Color Temperature Contact Factory. WW - Wall Wash L-L-Shape 10W 11W SF and SA are Shipped with QickTrack Mounting Rail U-U-Shape R-Rectangle/Square 12W * Non-dimming +Contact Factory ++Custom Color Contact Factory EXAMPLE: CP-03W-35K-S-GF-RT-S-IC Page 1 of 7

2 WALL MOUNT FLAT FRONT Compose SYSTEM SURFACE ADJ. MOUNT, -3O DEGREES SURFACE ADJ. MOUNT, -3O DEGREES LED MODULE DIMENSIONS Available in 3 lengths A : Length A "A" Power Color CRI Length A Cable connect to next fixture in run Extends up to '' CP12 XXW XXK X 18'' CP18 XXW XXK X 48'' CP48 XXW XXK X 1.33 [34mm] Inside and Outside Pre-made Corners Available. Corner Angle ( 0 ) Power Color CRI Inside CPIC XXXD XXW XXK X Outside CPOC XXXD XXW XXK X CABLE OPTIONS Power Input Straight Cable: CP-PIC-S-120 [12.8mm] 1. [32mm] WIRE COLORS BLACK - Line WHITE - Neutral GREEN - Ground GRAY - Dimming (-) VIOLET - Dimming (+) CORNER MODULE OPTIONS Inside Corner Module: CPICXXXDXXWXXKX 0.6 [17mm] 0.7 [20mm] 0.4 [12mm] 120 [3048mm] 1.33 [34mm] 14 [356mm] Power Input Right Angle Cable: CP-PIC-R [17mm] [12.8mm] Outside Corner Module: CPOCXXXDXXWXXKX 1.33 [34mm] 14 [356mm] 0.9 [24mm] 0.4 [12mm] 1.1 [30mm] 120 [3048mm] WIRING DIAGRAM Page 2 of 7

3 SURFACE MOUNTING Surface Fixed Mount, 0 0: CP-CLP-FX1 Surface Adj. Mount, 0 0: CP-CLP-AJ1 1.8 [45.5mm] 2.0 [51mm] 0.3 [8mm] Surface Adj. Mount, Surface Adj. Mount, SURFACE ADJ. MOUNT, 25 DEGREES [59mm] [59mm] [59mm] 2.4 [61mm] QUICKTRACK MOUNTING SYSTEM Surface Mount Track: CP-CLP-QT 48 [1220mm] 0.3 [8mm] 16. [411mm] 15.6 [396mm] 15.6 [396mm] 2.0 [13mm] [13mm] Quicktrack Mounting System included in shipment and required for all Surface Mounted options. 4' Max. Length ALUMINUM Field Cutable Hardware Supplied By Others. Page 3 of 7

4 WALL MOUNT OPTIONS Wall Mount Flat Front CP-WF-EXT End Cap: CP-WF-END-L CP-WF-END-R 2.9 [72mm] 1.5 [39mm] WALL MOUNT CORNERS Inside Corner CP-WF-IC-XXXD Outside Corner CP-WF-OC-XXXD Wall Wall Wall Page 4 of 7

5 GYPSUM MUD-IN PROFILE OPTIONS Knife Edge 30 0 Extrusion CP-K1-EXT End Cap: CP-K1-END-L CP-K1-END-R 1.4 [36mm] 4.9 [127mm] 6.5 [165mm] Knife Edge 40 0 Extrusion CP-K2-EXT Flat Front 90 0 Extrusion CP-GF-EXT End Cap: CP-K2-END-L CP-K2-END-R End Cap: CP-GF-END-L CP-GF-END-R 0.3 [8mm] 1.4 [36mm] 1.4 [36mm] 4. [127mm] 2.5 [64mm] 5.7 [165mm] 4.0 [102mm] GYPSUM MUD-IN CORNERS Inside Corner: CP-K1-IC-XXXD CP-K2-IC-XXXD CP-GF-IC-XXXD Outside Corner: CP-K1-OC-XXXD CP-K2-OC-XXXD CP-GF-OC-XXXD Page 5 of 7

6 WALL WASH PROFILE OPTIONS Knife Edge Extrusion Using Fixed Mount CP-WW-EXT Knife Edge Extrusion Using Adjustable Mount CP-WW-EXT End Cap: CP-WW-END-L CP-WW-END-R End Cap: CP-WW-END-L CP-WW-END-R [51mm] [51mm] UNDER DEVELOPMENT WALL WASH CORNERS Inside Corner: CP-WW-IC-XXXD Outside Corner: CP-WW-OC-XXXD Page 6 of 7

7 SURFACE ADJ. MOUNT, 25 DEGREES AXIOM PROFILE EXTRUSIONS MUST BE SUPPLIED BY ARMSTRONG. i2systems WILL ONLY SUPPLY MOUNTING CLIP. ARCHITECT MUST SPECIFY ARMSTRONG AXIOM. ACT PROFILE OPTIONS CP-AC-CLP Armstrong AXIOM-Flat Front Indirect Light Cove Mounting Clip Armstrong Part Codes AXIDLCCXXXXXX FLAT FRONT EXTRUSION AXIDLCWXXXXXX Varies - 6 Min. Recommended [152mm] 4.5 [58mm] 2. SURFACE ADJ. MOUNT, -3O DEGREES 4 [102mm] *Specify this Mounting Clip for all Armstrong AXIOM Indirect Light Coves CLICK HERE FOR ACT DRAWINGS Extrusion Supplied by Armstrong. ACT PROFILE OPTIONS CP-AC-CLP Armstrong AXIOM-Knife Edge Indirect Light Cove Mounting Clip Armstrong Part Codes AXIDLCCKEXXXXXX AXIDLCWKEXXXXXX Varies - 6 Min. Recommended [152mm] [102mm] *Specify this Mounting Clip for all Armstrong AXIOM Indirect Light Coves Extrusion Supplied by Armstrong. Page 7 of 7