Installing Simplex and Duplex Receptacles into: Series 9000 Structural Panel Series 9000 Energy Management Panel and Worksurface Avenir Power Panel

Size: px

Start display at page:

Download "Installing Simplex and Duplex Receptacles into: Series 9000 Structural Panel Series 9000 Energy Management Panel and Worksurface Avenir Power Panel"

Quentin Mitchell
6 years ago
Views:

1 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE ( ) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: ) Or visit our website Si vous avez un problème, question, ou la demande, appellent votre revendeur local, ou Ligne 1 de Steelcase à 888.STEELCASE (888,783,322) pour l'action immédiate par les personnes qui veulent vous aider. (en dehors des Etats-Unis, Canada, Le Mexique, Porto Rico, et Les ÉTATS-UNIS. Les Îles Vierges, appel: 1,616,247,200) Ou visiter notre website Si usted tiene un problema, pregunta, o la petición, llama a su distribuidor local, o Línea 1 de Steelcase en 888.STEELCASE (888,783,322) para la acción inmediata por la gente que desea ayudarle. (fuera de los E.E.U.U., Canadá, Méjico, Puerto Rico, y Los E.E.U.U.. Islas de la Virgen, llamada: 1,616,247,200) O visite nuestro website 1998 Steelcase Inc. Rapids Grand, MI 4901 U.S.A. Les ETATS-UNIS. Los E.E.U.U. Printed in U.S.A. Imprimé aux Etats-Unis. Impreso en los E.E.U.U. Installing Simplex and Duplex Receptacles into: Series 9000 Structural Panel Series 9000 Energy Management Panel and Worksurface Avenir Power Panel DEDICATED CIRCUIT SHOWN System Flag Color 3-Circuit, Shared Neutral and System Ground (3) 4-Circuit, 3 with Shared Neutral and System Ground and 1- Isolated Circuit and Ground (3+D) Optional Wiring Schematics: System Flag Color 2-General Circuits with Shared Neutral & System Ground and 2-Designated circuits with Shared Neutral and Isolated Ground (2+2) Grey 3-Separate Circuits - 2 with own Neutral and Isolated Ground, 1 with own Neutral and System Ground (SN) White 4-Circuit - 3 with Shared Neutral and Isolated Ground, 1-Circuit with System Ground (3I+1) Tan ALL ELECTRICAL INSTALLATIONS SHOULD BE PERFORMED BY A QUALIFIED PERSON IN ACCORDANCE WITH CODES AND REGULATIONS APPLICABLE AT THE INSTALLATION SITE. CIRCUITS SHOULD BE CHECKED FOR PROPER VOLTAGES Rev A 1

2 Wiring Schematic Powered by Separate Panels Powered by Single Panels White/ Letters SHARED SYSTEM SHARED ISOLATED L-1, and L-2 must be connected to different phases. L-3 and L-4 must be connected to different phases. /Yellow White/ Letters /Yellow SHARED SHARED SYSTEM ISOLATED L-1, L-2, & L-3 are connected to P-1, P-2 & P-3 respectively. L-4 is connected to P-1 or P-2 only and not to the same phase as L-3. 3 Circuit, Separate Neutrals Powered by Separate Panels 3 Circuit, Separate Neutrals Powered by Single Panels LINE A LINE B /Yellow White/ Letters LINE A LINE B A B ISOLATED C SYSTEM L-A, L-B, and L-C must be connected to different phases. LINE A LINE B White/ Letters /Yellow LINE A LINE B A B C ISOLATED SYSTEM 2 Risk Fire or Electric Shock: This fice furnishing system may be connected to more than one source supply. All sources must be disconnected prior to any servicing. No single circuit may be powered by more than one source. ELECTRICAL DATA: 120 V 60 HZ 20 Amp USA 1 Amp CANADA 208Y/120 VAC 3-Phase Service 240/120 VAC 1-Phase Service Wiring schematics must be followed to prevent overloading the neutrals Rev A

3 Wiring Schematic 3+D - Powered by Separate Panels 3+D Powered by Single Panel SHARED SYSTEM ISOLATED /Yellow L-4 may be connected to P-1, P-2, or P-3 SHARED SYSTEM ISOLATED /Yellow L-4 should alternate between P-1, P-2, and P-3 to balance circuit loading. 3I+1 - Powered by Separate Panels 3I+1 - Powered by Single Panel SHARED /Yellow ISOLATED SYSTEM White/ Letters L-4 may be connected to P-1, P-2, or P-3 White/ Letters /Yellow SHARED SYSTEM ISOLATED L-4 should alternate between P-1, P-2, and P-3 to balance circuit loading. 3 3 Circuit, Shared Neutral SHARED SYSTEM ELECTRICAL DATA: 120 V 60 HZ 20 Amp USA 1 Amp CANADA 208Y/120 VAC 3-Phase Service 240/120 VAC 1-Phase Service Wiring schematics must be followed to prevent overloading the neutrals. 3 Circuit, Shared Neutral Powered by Split Phase Panel P-1 P-2 SHARED SYSTEM L-3 must be omitted or connected to the load side L-1 or L-2. Risk Fire or Electric Shock: This fice furnishing system may be connected to more than one source supply. All sources must be disconnected prior to any servicing. No single circuit may be powered by more than one source Rev A

4 PANEL BASE INSTALLATION Remove base trim by pushing down on steel tabs at the bottom extreme ends (in area glides) and lifting straight up and out. Position and connect simplex receptacle to panel powerway assembly. Slide optional strain relief strap thru slot at center mounting hole receptacle. Secure receptacle and strap with (2) screws. Remove access cover from base trim, using a flat-bladed screwdriver. Replace base trim by reversing the removal procedure. Be careful to clear strain strap with base trim. If receptacle and base trim do not align, the powerway may be adjusted by loosening the (2) remaining screws and sliding the powerway to either end. Re-tighten screws and replace base trim. APPLY PRESSURE TO STEEL TABS STRUCTURAL PANEL POWERWAY STRAIN RELIEF STRAP 4 ACCESS COVER Rev A

5 2 P-SERIES MOBILES POWER PANEL (BASE ) Remove base trim by pushing down on steel tabs at the bottom extreme ends (in area glides) and lifting straight up and out. Position and connect simplex receptacle to panel powerway assembly. Slide optional strain relief strap thru slot at center mounting hole receptacle. Secure receptacle and strap with (2) screws. Remove access cover from base trim, using a flat-bladed screwdriver. Replace base trim by reversing the removal procedure. Be careful to clear strain strap with base trim. If receptacle and base trim do not align, the powerway may be adjusted by loosening the (2) remaining screws and sliding the powerway to either end. Re-tighten screws and replace base trim. ACCESS COVER STRAIN RELIEF STRAP Rev A

Avenir & kick Powerway

Avenir & kick Powerway System Flag Color -3-Circuit, Shared Neutral and System Ground (SHN) -4-Circuit, 3 with Shared Neutral and System Ground and 1- Isolated Circuit and Ground (3+D) (18" & 24" ONLY)