BP101WX1-206 Product Specification For Lenovo Rev.A

Size: px

Start display at page:

Download "BP101WX1-206 Product Specification For Lenovo Rev.A"

Louisa Wells
6 years ago
Views:

1 B26-56-O (/3) A4(2 X 297) PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE OT AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE OT AND MUST BE RETURNED TO BOE OT UPON ITS REQUEST BPWX-26 Product Specification For Lenovo Rev.A BEIJING BOE OPTOELECTRONICS TECHNOLOGY S8-65-6A-48 PRODUCT GROUP TFT-LCD REV. A ISSUE DATE OF 33

2 B26-56-O (2/3) A4(2 X 297) TFT LCD PRODUCT O REVISION HISTORY REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED O - Initial Release S.N Chen A - Change the drawings of outline (Page 29&3) S.N Chen S8-65-6A-48 BPWX-26 Product Specification 2 OF 33

3 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Contents No. Items Page. General Description 4 2. Absolute Maximum ratings 6 3. Electrical specifications Optical specifications Interface Connection 4 6. Signal Timing Specification 8 7. Signal Timing waveforms 2 8. Input Signals, Display Colors & Gray Scale of Colors 2 9. Power Sequence 22. Connector description 23. Mechanical Characteristics Reliability Test Handling & Cautions Label Packing information Mechanical Outline Dimension EDID Table 3 S8-65-6A-48 BPWX-26 Product Specification 3 OF 33

4 B26-56-O (3/3) A4(2 X 297). GENERAL DESCRIPTION. Introduction TFT LCD PRODUCT O BPWX-26 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a.7 inch diagonally measured active area with WXGA resolutions (28 horizontal by 8 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 6.7M colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type. Connector (CN ) VDD LVDS Input Signal DC/DC Gamma Vcom TFT LCD Panel 28 8 Source Driver Gate Driver V_LED LED Driver FPC Back Light (SMD LED Array).2 Features Channel LVDS Interface with pixel / clock Thin and light weight Display 6.7M colors (Hi FRC) High luminance and contrast ratio, low reflection and wide viewing angle DE (Data Enable) signal mode 3.3V for Logic Power and 3.7V for LED Back Light Power RoHS Compliant S8-65-6A-48 BPWX-26 Product Specification 4 OF 33

5 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Application Tablet & Application Mini-PC (Wide Type).4 General Specification < Table. General Specifications > Parameter Specification Unit Remarks Active area 26.96(H) 35.6(V) mm Number of pixels 28(H) 8(V) pixels Pixel pitch 69.5 μm Pixel arrangement Pixels RGB stripe arrangement Display colors 6.7M(6bits + Hi-FRC) colors Display mode Transmission mode. Normally Black Outline Dimension typ. mm Weight 5 (max) gram Surface Treatment Back-light Hard Coating, 3H, Low Reflection (Front Polarizer) Bottom edge side, -LED Lighting Bar Type 36* LED Array S8-65-6A-48 BPWX-26 Product Specification 5 OF 33

6 B26-56-O (3/3) A4(2 X 297) 2. ABSOLUTE MAXIMUM RATINGS TFT LCD PRODUCT O The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table 2. < Table 2. LCD Module Electrical Specifications > [Ta =25±2 ] Parameter Symbol Min. Max. Unit Remarks Power Supply Voltage (LCD Module) V DD V Back-light Power Supply Voltage HV DDOUT V Back-light LED Current I HVDD - 96 ma Back-light LED Reverse Voltage V R - 2 V Operating Temperature T OP +5 Storage Temperature T ST ) Note : ) Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39 max. and no condensation of water. Relative Humudity Operating Range (5, 5) 4 (6, 27) 2 5 Storage Range Temperature ( ) S8-65-6A-48 BPWX-26 Product Specification 6 OF 33

7 TFT LCD PRODUCT O ELECTRICAL SPECIFICATIONS 3. TFT LCD Module < Table 3. LCD Module Electrical Specifications > [Ta =25±2 ] Parameter Symbol Values Unit Notes Min Typ. Max Power Supply Input Voltage V DD V Power Supply Current I DD ma Note LED Driver Power Supply Voltage H VDD 3-8 V LED Driver Power Supply Note 2 I Current HVDD ma LED Driver Efficiency η % Positive-going Input V Threshold Voltage IT mv Vcom =.2V Negative-going Input typ. V Threshold Voltage IT mv Differential input common mode voltage V com V V IH =mv, V IL =-mv P D -. W Power Consumption P BL W Have Driver P Total W Notes :. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.7V at 25 Max value at White Pattern 2. Calculated value for reference (VLED X ILED) 3. CTF of Power Supply Current: PD /PBL S8-65-6A-48 BPWX-26 Product Specification 7 OF 33 B26-56-O (3/3) A4(2 X 297)

8 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Back-light Unit < Table 4. LED Driving guideline specifications > Ta=25+/-2 C Parameter Min. Typ. Max. Unit Remarks LED Forward Voltage V F V - LED Forward Current I F ma - LED Power Consumption P LED W Note LED Life-Time N/A 5, - - Hour Power supply voltage for Back light Power supply Current for Back light EN Control Level PWM Control Level V LED V I LED ma Backlight on V ENH V Backlight off V ENL V PWM High Level PWM Low Level V PML V V PML V IF = 2mA Note 2 EN logic high voltage EN logic low voltage PWM Control Frequency F PWM 5-2 KHz PWM duty Ratio % - - % Notes :. Calculator Value for reference I LED V LED = P LED 2. The LED Life-time define as the estimated time to 5% degradation of initial luminous. S8-65-6A-48 BPWX-26 Product Specification 8 OF 33

9 B26-56-O (3/3) A4(2 X 297) 4. OPTICAL SPECIFICATION 4. Overview TFT LCD PRODUCT O The test of Optical specifications shall be measured in a dark room (ambient luminance lux and temperature = 25±2 ) with the equipment of Luminance meter system (Goniometer system and TOPCON BM-5) and test unit shall be located at an approximate distance 5cm from the LCD surface at a viewing angle of θ and Φ equal to. While scanning θand/or Ø, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 3 minutes prior to measurement. VDD shall be 3.3+/-.3V at 25 C. Optimum viewing angle direction is 6 clock. 5 Points Y w 4.2 Optical Specifications <Table 5. Optical Specifications> Parameter Symbol Condition Min. Typ. Max. Unit Remark Θ Horizontal Deg. Viewing Angle Θ Deg. CR > range Θ Vertical Deg. Θ Deg. Note Color Gamut % Luminance Contrast ratio CR Θ = Note 2 Luminance of White cd/m 2 Note 3 White Θ = Luminance uniformity 5 Points ΔY5-8 - Note 4 White Chromaticity W x Typ..33 Typ. Θ = W y.329 Note 5 Red R x.6 R y.34 Reproduction G Typ. Typ. Green x.35 Θ = of color G y Blue B x.5 B y.25 Response Time Ta= 25 C T (Rising + Falling) RT Θ = ms Note 6 Cross Talk CT Θ = % Note 7 S8-65-6A-48 BPWX-26 Product Specification 9 OF 33

10 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Notes :. Viewing angle is the angle at which the contrast ratio is greater than. The viewing angles are determined for the horizontal or 3, 9 o clock direction and the vertical or 6, 2 o clock direction with respect to the optical axis which is normal to the LCD surface (see FIGURE ). 2. Contrast measurements shall be made at viewing angle of Θ= and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (see FIGURE ) Luminance Contrast Ratio (CR) is defined mathematically. CR = Luminance when displaying a white raster Luminance when displaying a black raster 3. Center Luminance of white is defined as luminance values of 5point average across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations shown in FIGURE 2 for a total of the measurements per display, the LED current is set at 2mA. 4. The White luminance uniformity on LCD surface is then expressed as : ΔY = Minimum Luminance of 5 (3)points / Maximum Luminance of 5(3) (points (see FIGURE 2). 5. The color chromaticity coordinates specified in Table 5 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. 6. The electro-optical response time measurements shall be made as FIGURE 3 by switching the data input signal ON and OFF. The times needed for the luminance to change from % to 9% is Tr, and 9% to % is Td. 7. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark. (See FIGURE 4). S8-65-6A-48 BPWX-26 Product Specification OF 33

11 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Optical measurements Figure. Measurement Set Up Photo detector (TOPCON BM-5A) TFT-LCD module Field = o 5 cm LCD panel Center of the screen View angel range measurement setup Figure 2. White Luminance and Uniformity Measurement Locations (5 points) Center Luminance of white is defined as luminance values of center 5 points across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations shown in FIGURE 2 for a total of the measurements per display. The White luminance uniformity on LCD surface is then expressed as : ΔY5 = Minimum Luminance of 5 points / Maximum Luminance of 5points (see FIGURE 2). S8-65-6A-48 BPWX-26 Product Specification OF 33

12 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Figure 3. Uniformity Measurement Locations (3 points) The White luminance uniformity on LCD surface is then expressed as : ΔY3 = Minimum Luminance of 3 points /Maximum Luminance of 3 points (see FIGURE 3). The White luminance uniformity of 5 point is the same test method as 3 point using FIGURE 2. Figure 4. Response Time Testing Display data Black (TFT OFF) White (TFT ON) Black (TFT OFF) Optical Response % 9% TR TF % % Time The electro-optical response time measurements shall be made as shown in FIGURE 4 by switching the data input signal ON and OFF. The times needed for the luminance to change from % to 9% is Tr and 9% to % is Td. S8-65-6A-48 BPWX-26 Product Specification 2 OF 33

13 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Figure 5. Cross Modulation Test Description VIEW AREA VIEW AREA 256,5 768,5 L3 Y B (768, 3) 256,45 768,45 Y A (768,3) L Where: Y B - Y A Cross-Talk (%) = Y A = Initial luminance of measured area (cd/m 2 ) Y B = Subsequent luminance of measured area (cd/m 2 ) Y A The location measured will be exactly the same in both patterns. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to FIGURE 5). S8-65-6A-48 BPWX-26 Product Specification 3 OF 33

14 B26-56-O (3/3) A4(2 X 297) 5. INTERFACE CONNECTION. TFT LCD PRODUCT O Electrical Interface Connection The electronics interface connector is E-2. The connector interface pin assignments are listed in Table 6. <Table 6.. Pin Assignments for the Interface Connector> Terminal Symbol Functions Pin No. Symbol Description NC Non Connection 2 VDDIN 3 VDDIN Power supply VDDIN=3.3V (Typ.) 4 VDC Power supply VDC=3.3V (Typ.) 5 NC Non Connection 6 CLK EDID CLK for EDID function use 7 Data EDID CLK for EDID function use 8 RIN- LVDS Negative data signal (-) 9 RIN+ LVDS Positive data signal (+) GND GROUND RIN- LVDS Negative data signal (-) 2 RIN+ LVDS Positive data signal (+) 3 GND GROUND 4 RIN2- LVDS Negative data signal (-) 5 RIN2+ LVDS Positive data signal (+) 6 GND GROUND 7 LVDS_CLK- LVDS Negative CLK signal (-) 8 LVDS_CLK+ LVDS Positive CLK signal (+) 9 GND GROUND 2 RIN3- LVDS Negative data signal (-) S8-65-6A-48 BPWX-26 Product Specification 4 OF 33

15 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O <Table 6.2. Pin Assignments for the Interface Connector> Terminal Symbol Functions Pin No. Symbol Description 2 RIN3+ LVDS Positive data signal (+) 22 CE_EN Color engine enable 23 NC Non Connection 24 NC Non Connection 25 GND GROUND 26 NC Non Connection 27 NC Non Connection 28 GND GROUND 29 NC Non Connection 3 NC Non Connection 3 LED_GND 32 LED_GND LED GROUND 33 LED_GND 34 NC Non Connection 35 LED_PWM LED driver PWM duty 36 LED_EN LED driver enable 37 CABC_EN CABC function enable 38 VLED 39 VLED Power supply VLED=3~8V (Typ.) 4 VLED S8-65-6A-48 BPWX-26 Product Specification 5 OF 33

16 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O LVDS Interface PC Side TFT-LCD Side R~R7 G~G7 B~B7 Hsync Vsync DE TTL Parallel-to-LVDS CN ohm ohm ohm ohm LVDS to TTL Parallel R ~ R5 G ~ G5 B ~ B5 Hsync Vsync DE CLK PLL ohm PLL CLK 5.3.LVDS Input signal S8-65-6A-48 BPWX-26 Product Specification 6 OF 33

17 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Data Input Format (,) (2,) (23,) (24,) R G B R G B R G B R G B Pixel = 3 Dots R G B R G B R G B R G B R G B (,6) (2,6) (23,6) (24, 6) Display Position of Input Data (V-H) S8-65-6A-48 BPWX-26 Product Specification 7 OF 33

18 B26-56-O (3/3) A4(2 X 297) 6. SIGNAL TIMING SPECIFICATION 6. The BPWX-26 is operated by the DE only. TFT LCD PRODUCT O S8-65-6A-48 BPWX-26 Product Specification 8 OF 33

19 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O LVDS Rx Interface Timing Parameter The specification of the LVDS Rx interface timing parameter is shown in Table 8. <Table 8. LVDS Rx Interface Timing Specification> Item Symbol Min Typ Max Unit Remark CLKIN Period trcip nsec Input Data trip nsec Input Data trip tricp/7-.4 tricp/7 tricp/7+.4 nsec Input Data 2 trip7 2 tricp/ tricp/7 2 tricp/7+.4 nsec Input Data 3 trip6 3 tricp/ tricp/7 3 tricp/7+.4 nsec Input Data 4 trip5 4 tricp/ tricp/7 4 tricp/7+.4 nsec Input Data 5 trip4 5 tricp/ tricp/7 5 tricp/7+.4 nsec Input Data 6 trip3 6 tricp/ tricp/7 6 tricp/7+.4 nsec Input Data 7 trip2 7 tricp/ tricp/7 7 tricp/7+.4 nsec trip trip2 trip3 trip4 trip5 trip6 trip7 trip RXO/Ez +/- * Z =,, 2,3 Rx2 Rx Rx Rx7 Rx6 Rx5 Rx4 Rx3 Rx2 Rx Rx RxOCLKIN+ Vdiff=[v] trcip Vdiff=[v] RxECLKIN+ * Vdiff = (RXO/Ez+)-(RXO/Ez-),.,(RXO/ECLK+)-(RXO/ECLK-) S8-65-6A-48 BPWX-26 Product Specification 9 OF 33

20 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O SIGNAL TIMING WAVEFORMS OF INTERFACE SIGNAL DCLK tclk.5 VDD Valid data First data Invalid data Pixel data Pixel data Invalid data Valid data Second data Invalid data Pixel data Pixel data Invalid data DE(Data Enable) HSync thp thv DE(Data Enable) tvp VSync tvv DE(Data Enable) S8-65-6A-48 BPWX-26 Product Specification 2 OF 33

21 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O S8-65-6A-48 BPWX-26 Product Specification OF INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS Green Brighter Darker Black Gray Scale of Green Blue Brighter Darker Black Gray Scale of Blue White Yellow Magenta Red Cyan Green Blue Black Basic Colors Red Brighter Darker Black Gray Scale of Red Darker Brighter White B6 B5 B4 B3 B2 B B G5 G4 G3 G2 G G G6 R3 R4 R5 R6 R R2 R B7 G7 R7 Black Gray Scale of White Blue Data Green Data Red Data Color & Gray Scale Input Data Signal

TFT LCD PRODUCT O 23.4.5 9. POWER SEQUENCE To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below Parameter Values Min Typ Max Units T.

22 TFT LCD PRODUCT O POWER SEQUENCE To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below Parameter Values Min Typ Max Units T.5 - ms T2-5 ms T3-3 ms T ms T ms T ms Notes:. When the power supply VDD is V, keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. Back Light must be turn on after power for logic and interface signal are valid. S8-65-6A-48 BPWX-26 Product Specification 22 OF 33 B26-56-O (3/3) A4(2 X 297)

23 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Connector Description Physical interface is described as for the connector on LCM. These connectors are capable of accommodating the following signals and will be following components.. TFT LCD Module Connector Name /Description Manufacturer Type/ Part Number For Signal Connector IPEX or Compatible E-2 or Compatible.2 LED Connector(Jointing) Pin No. Symbol For Signal Connector VLEDP LED Anode Power Supply 2 VLEDN LED Cathode Power Supply S8-65-6A-48 BPWX-26 Product Specification 23 OF 33

24 B26-56-O (3/3) A4(2 X 297). MECHANICAL CHARACTERISTICS. Dimensional Requirements TFT LCD PRODUCT O FIGURE 5 shows mechanical outlines for the model BPWX-26. Other parameters are shown in Table 9. Parameter Specification Unit Active Area (H) 35.6 (V) Number of pixels 28(H) X8 (V) ( pixel = R + G + B dots) Pixel pitch.695 Pixel arrangement RGB Vertical stripe Display colors 6.7M Display mode Normally Black Dimensional outline 228.6*49.26*2.39 (Typ.) mm Weight 5 (Max) gram Back-light LED, Horizontal-LED Array type.2 Mounting See FIGURE 6..3 Glare and Polarizer Hardness. The surface of the LCD has an low reflection coating and hard coating to reduce scratching..4 Light Leakage <Table 9. Dimensional Parameters> There shall not be obvious visible light from the back-lighting system around the edges of the screen as seen from a distance 5cm from the screen with an overhead light level of 5lux. S8-65-6A-48 BPWX-26 Product Specification 24 OF 33

25 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O RELIABILITY TEST The Reliability test items and its conditions are shown in below. <Table. Reliability test> No Conditions High temperature storage test Ta = 6, 24 hrs 2 Low temperature storage test Ta = -2, 24 hrs 3 High temperature & high humidity operation test Ta = 5, 9%RH, 24 hrs 4 High temperature operation test Ta = 5, 24 hrs 5 Low temperature operation test Ta =, 24 hrs 6 Thermal shock Ta = -2 6 (.5 hr), cycle 7 Power on/off 2s on/2s off 2cycles 8 Vibration test.5g, ~5Hz Sign (non-operating) X,Y,Z / Sweep rate :.5hour 9 Shock test 22G, Half Sine Wave 2msec (non-operating) ±X,±Y,±Z Once for each direction Electro-static discharge test Air : 5 pf, 33Ω, 5 KV (non-operating) Contact : 5 pf, 33Ω, 8 KV 3. HANDLING & CAUTIONS () Cautions when taking out the module Pick the pouch only, when taking out module from a shipping package. (2) Cautions for handling the module As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connector in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care. (3) Cautions for the operation When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. S8-65-6A-48 BPWX-26 Product Specification 25 OF 33

26 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O (4) Cautions for the atmosphere Dew drop atmosphere should be avoided. Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. (5) Cautions for the module characteristics Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking. (6) Other cautions Do not disassemble and/or re-assemble LCD module. Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages. 4. LABEL () Product label X X X X X X X X X X X X X X X X X Type designation No. Control Number No 2. Rank / Grade No 3. Line classification (BOE OT:A/BC) No 4. Year ( : 2, : 2, ) No 5. Month (, 2, 3,, 9, X, Y, Z) No 6. Product Identification (FG) No 7. Serial Number S8-65-6A-48 BPWX-26 Product Specification 26 OF 33

B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O 23.4.5 (2) High voltage caution label (3) Box label Label Size: mm (L) 56 mm (W) Contents Model: BPWX-26 Q`ty: Module Q`ty in one box Serial No.

27 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O (2) High voltage caution label (3) Box label Label Size: mm (L) 56 mm (W) Contents Model: BPWX-26 Q`ty: Module Q`ty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date Internal use of Product BPWX-26 XX 2X.X.XX Type Grade Line Year Month Internal use Serial No S8-65-6A-48 BPWX-26 Product Specification 27 OF 33

Packing order TFT LCD PRODUCT O 23.4.5 -.

人工方式 ; step EPE Pad 2 层 step PET Tray PE Bag 2

每个 Pallet 上放 3 层 Box, 层 4 箱, 共计 2ea Box -.

28 B26-56-O (3/3) A4(2 X 297) 5. PACKING INFORMATION 5. Packing order TFT LCD PRODUCT O 将产品依次水平放入 PET Tray, 每个卡槽内 pcs 产品 -. 人工方式 ; -. 容量 : 3pcs/PET Tray -. 将 2pcs PET Tray 堆码后平放入 PE Bag -. 人工方式 ; step EPE Pad 2 层 step PET Tray PE Bag 2 step Top Cover step EPE Board 4 Outer Box 3 -. 每个 Pallet 上放 3 层 Box, 层 4 箱, 共计 2ea Box -. Pallet 外包装 Outer Box &Top Cover -. 设备 ( 堆叠 ), 人工 (Outer Box &Top Cover) -. 将 PE Bag 平放入 Inner Box, 上下放置 EPE Board -. 人工方式 -. 容量 :6pcs/Inner Box Inner Box -. 容量 : 72pcs/Pallet 5.2 Notes Box Dimension: 52mm(W) x 42mm(D) x 26mm(H) Package Quantity in one Box: 6pcs Total Weight:.87 kg S8-65-6A-48 BPWX-26 Product Specification 28 OF 33

29 B26-56-O (3/3) A4(2 X 297) 6. MECHANICAL OUTLINE DIMENSION TFT LCD PRODUCT O Figure 6. TFT-LCD Module Outline Dimension (Front View) S8-65-6A-48 BPWX-26 Product Specification 29 OF 33

30 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O Figure 7. TFT-LCD Module Outline Dimensions (Rear view) PRODUCT LABEL PRODUCT LABEL 焊盘 S8-65-6A-48 BPWX-26 Product Specification 3 OF 33

31 B26-56-O (3/3) A4(2 X 297) 7. EDID Table TFT LCD PRODUCT O S8-65-6A-48 BPWX-26 Product Specification 3 OF 33

32 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O S8-65-6A-48 BPWX-26 Product Specification 32 OF 33

33 B26-56-O (3/3) A4(2 X 297) TFT LCD PRODUCT O S8-65-6A-48 BPWX-26 Product Specification 33 OF 33

TITLE : HT12X Product Specification (Rev. B)

TITLE : HT12X Product Specification (Rev. B) PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE TFT-LCD SBU AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE TFT- LCD SBU AND MUST BE RETURNED TO BOE TFT-LCD SBU UPON