Approved by Checked by Prepared by

Size: px

Start display at page:

Download "Approved by Checked by Prepared by"

Rosaline Reeves
6 years ago
Views:

1 INNOLUX DISPLAY CORPORATION MT25DW V. LCD MODULE SPECIFICATION ( ) Preliminary Specification ( ) Final Specification Approved by Checked by Prepared by Innolux Display Corporation, No.6 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park, Chu-Nan 35, Miao-Li County, Taiwan Tel Fax Document Number MT25DW V. DR2-3

2 INNOLUX DISPLAY CORPORATION MT25DW V. LCD MODULE SPECIFICATION Department Prepared by Checked by MKT PD EE ME TD RA Innolux Display Corporation Document Number MT25DW V. DR2-3

4 SPEC NO. MT25DW V. PAGE 4/24 Contents A. General Specification 5 B. Electrical Specifications 6. Pin assignment 6 2. Absolute maximum ratings 8 3. Electrical characteristics 9 a. Typical operating conditions 9 b. Display color vs. input data signals 2 c. Input signal timing 3 d. Display position 4 e. Backlight driving conditions 4 C. Optical specifications 6 D. Reliability test items 9 E. Safety 2 F. Display quality 2 G. Handling precaution 2 H. Label 2 I. Mechanical drawings 23

5 SPEC NO. MT25DW V. PAGE 5/24 A. General specification NO. Item Specification Remark Display resolution (pixel),92(h) X 8(V), Full HD resolution 2 Active area (mm) (H) X268. (V) 3 Screen size (inch) 2.53 inches diagonal 4 Pixel pitch (mm).24825(h) X (V) 5 Color configuration R, G, B vertical stripe 6 Overall dimension (mm) 495.6(W) X 292.2(H) X 9.8(D) (typ.) 7 Color Gamut 68% 8 Weight (g) TBD 9 Surface treatment Anti-Glare, Haze=25%, Hard coating (3H) Note Input color signal 8 bit LVDS Display colors 6.7M (6 bit with Hi-FRC) 2 Optimum viewing direction 6 o clock 3 Backlight White-LED 4 Others RoHS & TCO 5.& Halogen Free compliance Note Glare Option.

6 B. Electrical specifications. Pin assignment Connector SPEC NO. MT25DW V. PAGE 6/24 FOXCONN GS2332- R-7F or mechanical interface equivalent connector. Pin No Symbol Description Frame VSS Ground RXinO- -LVDS differential data input, Chan -Odd 2 RXinO+ +LVDS differential data input, Chan -Odd 3 RXinO- -LVDS differential data input, Chan -Odd 4 RXinO+ +LVDS differential data input, Chan -Odd 5 RXinO2- -LVDS differential data input, Chan 2-Odd 6 RXinO2+ +LVDS differential data input, Chan 2-Odd 7 VSS Ground 8 RXOC- -LVDS differential Clock input (Odd) 9 RXOC+ +LVDS differential Clock input (Odd) RXinO3- -LVDS differential data input, Chan 3-Odd RXinO3+ +LVDS differential data input, Chan 3-Odd 2 RXinE- -LVDS differential data input, Chan -Even 3 RXinE+ +LVDS differential data input, Chan -Even 4 VSS Ground 5 RXinE- -LVDS differential data input, Chan -Even 6 RXinE+ +LVDS differential data input, Chan -Even 7 VSS Ground 8 RXinE2- -LVDS differential data input, Chan 2-Even 9 RXinE2+ +LVDS differential data input, Chan 2-Even 2 RXEC- -LVDS differential Clock input (Even) 2 RXEC+ +LVDS differential Clock input (Even) 22 RXinE3- -LVDS differential data input, Chan 3-Even 23 RXinE3+ +LVDS differential data input, Chan 3-Even 24 VSS Ground 25 NC No Connection 26 NC No Connection 27 NC No Connection 28 VCC +5.V power supply 29 VCC +5.V power supply 3 VCC +5.V power supply Frame VSS Ground

7 SPEC NO. MT25DW V. PAGE 7/24 First pin First pin Rear View of LCM.2. Recommend Connector for Backlight Unit This connector is mounted on the monitor system board for LED light-bar FFC mating. Connector Name/Designation Match Connector Manufacturer Entery INDUSTRIAL CO.,LTD Mating type part number 78-QN-R

8 SPEC NO. MT25DW V. PAGE 8/24.3 Light-bar Connector Pin Assignment Upper Light-bar Connector Pin Assignment Pin No Symbol Description IRLED LED current sense for string 2 IRLED LED current sense for string 3 IRLED2 LED current sense for string 2 4 VLED LED power supply 5 VLED LED power supply 6 VLED LED power supply 7 VLED LED power supply 8 IRLED2 LED current sense for string 2 9 IRLED3 LED current sense for string 3 IRLED3 LED current sense for string 3 Lower Light-bar Connector Pin Assignment Pin No Symbol Description IRLED LED current sense for string 2 IRLED LED current sense for string 3 IRLED2 LED current sense for string 2 4 VLED LED power supply 5 VLED LED power supply 6 VLED LED power supply 7 VLED LED power supply 8 IRLED2 LED current sense for string 2 9 IRLED3 LED current sense for string 3 IRLED3 LED current sense for string 3

9 SPEC NO. MT25DW V. PAGE 9/24 2. Absolute maximum ratings Parameter Symbol Values Unit Remark Min. Typ. Max. Power voltage V cc V At 25 C Input signal voltage V LH V At 25 C Operating temperature Top - 5 C Note Storage temperature T ST -2-6 C Note 2 Note The relative humidity must not exceed 9% non-condensing at temperatures of 4 C or less. At temperatures greater than 4 C, the wet bulb temperature must not exceed 39 C. Note 2 The unit should not be exposed to corrosive chemicals.

10 SPEC NO. MT25DW V. PAGE /24 3. Electrical characteristics a. Typical operating conditions Item Symbol Min. Typ. Max. Unit Remark Input Voltage V cc V Permissive Power Input Ripple V RF Vp-p Input Current Black I cc - 3 Note White I cc - 7 ma Note 2 Mosaic I cc Note 3 Rush Current I Rush A Note 4 Logic Input Voltage LVDS IN+, IN- Common Mode Voltage VCM V Differential Input Voltage VID - 6 mv Threshold Voltage (High) VTH - - mv Note 5 Threshold Voltage (Low) VTL mv Note 5 Note The specified current is under the Vcc =5V, 25 C, fv=6hz (frame frequency) condition whereas black pattern is displayed. Note 2 The specified current is under the Vcc =5V, 25 C, fv=6hz (frame frequency) condition whereas white pattern is displayed. Note 3 The specified current is under the Vcc =5V, 25 C, fv=6hz (frame frequency) condition whereas mosaic pattern(black & white [8*6] ) is displayed. White 255 Gray Black Gray

11 SPEC NO. MT25DW V. PAGE /24 Note 4 test condition () V DD = 5 V, V DD rising time = 47 µs ± % (2) Pattern Mosaic pattern 9% V DD (3) Test circuit Ton=47 s % 5 V M 2SK59 VDD ( LCD INPUT) R 47K FUSE C uf CONTROL SIGNAL (HIGH to LOW) R2 K M2 2SK399 2V R3 C2 Note 5 LVDS signal definition C3 uf 47K pf VIN + = Positive differential DATA & CLK Input VIN- = Negative differential DATA & CLK Input VID = VIN + VIN-, VCM = VCM + VCM-, VID = VID + VID-, VID+ = VIH + VIH-, VID- = VIL + VIL-, VCM = (VIN + +VIN-)/2, VCM+ = (VIH + +VIH-)/2, VCM- = (VIL + +VIL-)/2,

12 SPEC NO. MT25DW V. PAGE 2/24 Note 6 Power on sequence for LCD V DD Panel Power Supply V DC Interface Signals % T 9% T6 T7 9% 9% 9% T5 % % Valid Interface Data T2 9% 9% Backlight Power Supply T3 T4 Parameter Value Unit Min Typ Max ms T. - ms T2 3 5 ms T ms T ms T5 2 5 ms T6. - ms T7 - - ms

13 SPEC NO. MT25DW V. PAGE 3/24 b. Display color vs. input data signals The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. Color Input color data Red Green Blue MSB LSB MSB LSB MSB LSB R7 R6 R5 R4 R3 R2 R R Black Red(255) Green(255) Blue(255) Cyan Magenta Yellow White Basic colors Red() dark Red() Red(2) Red(253) Red(254) Red(255) bright Red Green()dark Green() Green(2) Green(253) Green(254) Green(255)bright Green Blue() dark Blue() Blue(2) Blue(253) Blue(254) Blue(255) bright Blue G7 G6 G5 G4 G3 G2 G G B7 B6 B5 B4 B3 B2 B B

14 SPEC NO. MT25DW V. PAGE 4/24 c. Input signal timing Support Input Timing Table Item Description Min. Typ. Max. Unit Clock Dclk period ns frequency MHz T V_TOTAL V total line number 9 6 T H_TOTAL Vertical T V_DATA Data duration 8 T H_TOTAL T VB V-blank 2 8 T H_TOTAL f V frequency Hz Horizontal T H_TOTAL H total pixel number 88 2 DClk T H_DATA Data duration 96 DClk T HB H-blank DClk Note Because this module is operated by DE only mode, Hsync and Vsync input signals should be set to low Logic level or ground. Otherwise, this module would operate abnormally. INPUT SIGNAL TIMING DIAGRAM Tv Tvd Tvb DE Th DCLK DE Tc Thb Thd DATA

15 SPEC NO. MT25DW V. PAGE 5/24 d. Display Position D(,) D(2,) D(96,) D(99,) D(92,) D(,2) D(2,2) D(96,2) D(99,2) D(92,2)..... D(,54) D(2,54) D(96,54) D(99,54) D(92,54)..... D(,79) D(2,79) D(96,79) D(99,79) D(92,979) D(,8) D(2,8) D(96,8) D(99,8) D(92,8) e. Backlight Unit Parameter Symbol Min. Typ. Max. Unit Note Light Bar Input voltage VLED VDC (Duty %) Light Bar Input current ILED madc Note,2,3 Power Consumption PLED W Note 4 LED life time LBL - 3, - Hrs Note 5 Note There are one Light Bar, and the specified current is input LED chip % duty current. Note 2 The sensing current of each string is 6mA. Note 3 The light bar have three current sensing strings, so that the light bar input current is 8mA. Note 4 PLED = ILED VLED. Note 5 The life time is determined as the time at which luminance of the LED becomes 5% of the initial brightness or not normal lighting at ILED=36mA on condition of continuous operating at 25±2 C.

16 SPEC NO. MT25DW V. PAGE 6/24 C. Optical specifications Specification Item Symbol Condition Min. Typ. Max. Response time Tr Unit Remark Tf θ= ms Note 4 Tr+Tf - 5 Contrast ratio Viewing angle CR θ= 7 - Note 3,5 Top CR Bottom CR Left CR deg. Note 3,5,6 Right CR Brightness (Center) YL nits Note 3 Color chromaticity(cie) Wx.33 Wy.329 Rx TBD Ry TBD θ= -.3 Gx TBD +.3 Note 3 Gy TBD Bx TBD By TBD White uniformity (9) δ W Note 3,7 Cross talk(in 6HZ) Ct % Note 8 Note Ambient temperature = 25 C. Note 2 To be measured in dark room after backlight warm up 3 minutes. Note 3 To be measured with a viewing cone of 2 by Topcon luminance meter BM-5A. Note 4 Definition of response time The output signals of BM-7 are measured when the input signals are changed from Black to White (falling time) and from White to Black (rising time), respectively. The response time interval is between the % and 9% of amplitudes. Refer to figure as below.

17 Signal(Relative value) SPEC NO. MT25DW V. PAGE 7/24 % 9% "White" "Black" "White" % % Tr Tf Note 5 Definition of contrast ratio Contrast ratio is calculated by the following formula. Brightness on the "white" state Contrast ratio (CR)= Brightness on the "black" state Note 6 Definition of viewing angle Note 7 Definition white uniformity Luminance are measured at the following nine points (P~P9). W = Minimum Brightness of nine points (P~P9). Maximum Brightness of nine points (P~P9).

18 SPEC NO. MT25DW V. PAGE 8/24 Note 8 /2 /6 2/3 /2 /3 /6 A /6 A /2 B 27 gray level 27 gray level B /6 /3 /2 2/3 gray level l L A -L A l / L A x %= 2% max., L A and L A are brightness at location A and A l L B -L B l / L B x %= 2% max., L B and L B are brightness at location B and B Note Optical characteristic measurement setup.

19 SPEC NO. MT25DW V. PAGE 9/24 D.Reliability test items Test Item Test Condition Judgment Remark High temperature storage 6 C, 24Hrs Note Note 2 Low temperature storage -2 C, 24Hrs Note Note 2 High temperature & high humidity operation 4 C, 9%RH, 24Hrs (No condensation) Note Note 2 High temperature operation 5 C, 24Hrs Note Note 2 Low temperature operation C, 24Hrs Note Note 2 Thermal Shock (non-operation) Electrostatic discharge (ESD) (non-operation) Vibration (non-operation) Mechanical Shock (non-operation) -2 C~6 C -2 C /Hr, 6 C /Hr, cycles Contact+/-8kV, 5pF(33ohms), times/ point, time/ sec, total 6 points Air discharge+/-5kv, 5pF(33ohms), times/ point, time/ sec, total 9 points Vibration level.5g Bandwidth -3Hz Waveform sine wave, sweep rate min 3 min for each direction X, Y, Z (.5 Hrs in total) Shock level 5G, ms Waveform Half sine wave Direction ±X, ±Y, ±Z One time each direction Note Note 2 Note Note 2 Note Note 2 Note Note 2 MTBF Demonstration 3, hours with confidence level 9% Note Note 3 Note Pass Normal display image with no obvious non-uniformity and no line defect. Partial transformation of the module parts should be ignored. Fail No display image, obvious non-uniformity, or line defects. Note2 Evaluation should be tested after storage at room temperature for two hours. Note 3 The MTBF calculation is based on the assumption that the failure rate distribution meets the Exponential Model (CCFL excluded).

20 E. Safety SPEC NO. MT25DW V. PAGE 2/24 () Sharp Edge Requirements There will be no sharp edges or corners on the display assembly that could cause injury. (2) Materials a. Toxicity There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible InnoLux Toxicologist. b. Flammability All components including electrical components that do not meet the flammability grade UL94-V in the module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V or better. The actual UL flammability rating will be printed on the printed circuit board. c. Capacitors If any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. F. Display quality The display quality of the color TFT-LCD module should be in compliance with the Innolux s Incoming inspection standard. G. Handling precaution The Handling of the TFT-LCD should be in compliance with the Innolux s handling principle standard.

21 SPEC NO. MT25DW V. PAGE 2/24 H. Label () Module Label 73mm MT25DW V. AM25 xx 8 mm Z Z 2 Z 3 Z 4 Z 5 Z 6--Z 7--Z 8 Z 9 Z Z Z 2 Z 'Z 2 '-Z 3 ' Z 4 'Z 5'Z 6'Z 7 '-Z 8 ' - Z 9 '- Z '- Z ' Z 2 '-Z 3 '-Z 4 ' Z 5 ' -Z 6 '-Z 7 'Z 8 ' Z 9 ' -Z 2 'Z 2 'Z 22 ' Z 23 ' MADE IN XXX (a) Model Number MT25DW (b) Version V. (c) Serial ID I Z Z 2 Z 3 Z 4 Z 5 Z 6 Z 7 Z 8 Z 9 Z Z Z 2 Serial No Code of grade INL internal use INL internal use Year, Month, Date INL internal use Serial ID includes the information as below. Manufactured Date Year ~9, for 2~29 2. Month ~9 & A~C for Jan.~Dec. 3. Date ~9 & A~Z (exclude I, O, Q, U) for st~3th 4. Code of grade, 2, 3, 5, E 5. Serial No Module manufacture sequence no (d) Serial ID II (INL internal use)

22 SPEC NO. MT25DW V. PAGE 22/24 (2) Carton Label INNOLUX DISPLAY BOX ID mm Z Z 2 Z 3 Z 4 -- Z 5-- Z 6 Z 7 Z 8 Z 9 Model No. MT25DW V. AM25 XX Quantity 7 PCS MFG Date 2XX/XX/XX QC 2 mm Made in XXX (a) Model Number MT25DW (b) Version V. (c) Packing quantity 7 pcs (d) Serial ID Z Z 2 Z 3 Z 4 Z 5 Z 6 Z 7 Z 8 Z 9 Serial No Code of grade Year, Month, Date INL internal use Serial ID includes the information as below (a) Manufactured Date Year ~9, for 2~29 Month ~9 & A~C for Jan.~Dec. Date ~9 & A~Z (exclude I, O, Q, U) for st~3th (b) Code of grade,2, 3, 5, E (c) Serial No Module packing sequence no

23 I. ME Drawing () Front view

24 (2) Back view

10.4 XGA, MVA High brightness color TFT-LCD module

10.4 XGA, MVA High brightness color TFT-LCD module Chefree Technology Inc 104 XGA, MVA High brightness color TFT-LCD module Model: CH104CLGL-001 Date: Aug 24 th, 2012 Note: This specification is subject to change without notice Customer: Date: Approved