INTERFACE BOARD FTP-608 SERIES FTP-628DCL/DSL SERIES
|
|
- Helen Montgomery
- 5 years ago
- Views:
Transcription
1 INTERFACE BOARD FTP608 SERIES FTP628DCL/DSL SERIES INTERFACE 1. Centronics interface (1) Connector (CN2) Connector part number : BM30BSRDSGTF (JST) or equivalent Mating connector part number : SHDR30VSB (JST) or equivalent (2) Connector pin assignment I/O Contents I/O Contents 1 PRSTB I Data strobe 2 PRSTBRET Connected to logic 3 PRDT0 I Data 0 4 PRDT0RET Connected to logic 5 PRDT1 I Data 1 6 PRDT1RET Connected to logic 7 PRDT2 I Data 2 8 PRDT2RET Connected to logic 9 PRDT3 I Data 3 10 PRDT3RET Connected to logic 11 PRDT4 I Data 4 12 PRDT4RET Connected to logic 13 PRDT5 I Data 5 14 PRDT5RET Connected to logic 15 PRDT6 I Data 6 16 PRDT6RET Connected to logic 17 PRDT7 I Data 7 18 PRDT7RET Connected to logic 19 ACKNLG O Data input acknowledge 20 ACKNLGRET Connected to logic 21 BUSY O Busy 22 BUSYRET Connected to logic 23 RINF2 O Printer status 2 24 INPRMRET Connected to logic 25 SLCTIN I Printer select 26 INPRM I Reset 27 RINF1 O Printer status 1 28 RINF3 O Printer status 3 29 ATF I Paper feed request 30 Logic Notes: Symbol means a negative logic signal. RET signal is a return signal of the twisted pair cable. I or O means a signal direction from the interface board side. (3) Connector pin number (4) Data input signal timing PRDT0~7 BM30BSRDSGTF (JST) t1 t3 PRSTB t2 BUSY t4 ACKNLG t5 Data set time PRSTB pulse width Data hold time PRSTB to BUSY= H ACKNLG pulse time :t1 0.5 µsec :t2 0.5 µsec :t3 0.5 µsec :t4 0.5 µsec :t5 5.0 µsec 1
2 FTP628DCL/DSL Series (5) Printer status signals Error status RINF1 RINF2 RINF3 1. Paper out 2. Paper near end 3. Head up 4. Head temperature abnormality 5. Head voltage abnormality 6. Hardware abnormality 7. Mark detection abnormality 8. Normal 2. RS232C (1) Connector (CN3) Connector part number : B8BZRSM3BTF (J.S.T.) or equivalent Mating connector part number : ZHR8 (J.S.T.) or equivalent (2) Connector pin assignment I / O C ontents I / O Contents 1 RD I Receive data 2 TD O Transmission data 3 DTR O Data terminal ready 4 ground 5 DSR I Data set ready 6 SLCTIN I Printer select 7 INPRM I Reset 8 ATF I Paper feed request Notes: Symbol means a negative logic signal. I or O means a signal direction from the interface board side. CONNECTOR PIN ASSIGNMENT 1. Connector for (CN1) Part number : B6BXHA (J.S.T) or equivalent (board side) I / O C ontents I / O Contents 1 + V5 Power supply for logic 2 Ground for 3 Ground for head / motor 4 Ground for head / motor 5 Vdd Power supply for head motor 6 Vdd Power supply for head motor 2
3 FTP628DCL/DSL Series 2. Connector for printer mechanism connection (CN4) FTP628MCL053/054/101/ 103/353/354 Part number : (made by Molex) of Direction N ote of Direction Note 1 PS Paper sensor 16 TM1 Thermally sensitive resistor input terminal 1 2 PSVD Paper sensor grand 17 TM2 ( STB2) () Thermally sensitive resistor input terminal 2 (Thermal head energizing control signal) 3 * PES of paper sensor 18 STB3 (STB1) 4 HUP of head up sensor 19 STB2 (AE02) Thermal head energizing control signal 5 HSVD Head up sensor power 5 supply 20 STB1 (AE01) 6 VH Thermal head 21 7 VH 22 8 HD 9 HCLK signal of print data Synchronous clock for communication 23 LAT 24 HDO 10 Thermal head 25 VH 11 grand 26 VH 12 STB6 (STB5) 13 STB5 (STB4) 14 STB4 (STB3) 15 5VH Thermal head 27 A energizing 28 A control signal 29 B Power supply for thermal head control 30 B Thermal head power supply grand Thermal signal Print data signal Thermal supply Stepping signal head data latch head power motor drive Note: Twoinch mechanism besides ( ) (Threeinch mechanism in). 3. Autocutter (CN5) Part number : S4BPHSM3TB (JST or equivalent) No I/ O Note No I/ O Note 1 CHP I Auto cutter home position 2 (+5V) Logic ground 3 MT+ O Motor control signal 4 MT O Autocutter motor drive 3
4 FTP628DCL/DSL Series COMMANDS Command Contents HT LF FF DC 2 ECS RS ESC US ESC! + n ESC *+m+n1+n2+[d]k ESC 2 ESC 3+n ESC A+n ESC C+n ESC D+[n]k+NUL ESC J+n ESC K+n ESC R+n ESC c+1+n ESC d+n ESC e+n ECS s+n ECS t+n ESC {+n ESC V+n ESC EM+n ESC X+m+n ESC %+n ESC &+y+c+c2+x+d1~dn ESC?+n Moves print position to the next tab. Line feed. Feeds forms (new page). Power down. Sets reverse printing. Resets reverse printing. Sets print mode. Sets bit image mode. Sets 1/6 inch line feed length. Sets the line feed length. Printer initialization. Sets the space between the line. Sets the page length by character line. Sets the tab position. Feeds paper in forward direction and prints. Reverse paper feed. Selects international character. Sets internal processing. Printing and nline feeding. Prints and reverse feeds nlines. Sets printing speed. Character code table selection. Sets/resets upside down printing. Right Rotation 90 specification / cancellation. Setting the amount of the feeding at automatic paper feed. Setting the turning time of the motor excitation. External registration character specification / cancellation. External registration character definition. External registration character deletion. 4
5 FTP628DCL/DSL Series Commands continued Command Contents FS E+n FS 9+n FS r+n GS < GS A+m+n GS E+n GS V+n+m GS e+n+m GS h+n GS k+m+n+[d]k GS w+n GS a+n Correction of impressed energy. Sets the detection functions. Parameter transmission (valid only for DSL). Line feeds to the next mark. Sets the line feed length after mark detection. Sets print quality. Paper cutting (this command is only available for chip). Sets bar code width. Sets bar code height. Selectes bar code type and prints. Sets bar code length. Sets and cancels status transmission (valid only for DSL). OPTIONS 1. Cables P art Number Length (mm) Interface Cable (between board and equipment) For Centronics (CN2) F TP628Y (19.7 inches) For RS232C (CN3) F TP628Y (19.7 inches) Power supply cable (CN1) F TP628Y (19.7 inches) 2. Paper holder Part number Paper Flange Paper Stand FTP040HF FTP040HS 5
6 FTP628DCL/DSL Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited GotandaChuo Building 35, Higashigotanda 2chome, Shinagawaku Tokyo 141, Japan Tel: (813) Fax: (813) Web: North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1408) Fax: (1408) Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (3123) Fax: (3123) Web: Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #0401 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 06/02/
7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fujitsu: FTP638MCL103 FTP648MCL103 FTP638MCL104
24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012
24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012 FOR FTP-622/632/642MCL001/002/301/302/303/304 INTERFACE 1. Centronics (1) Connector (CN1) Connector part number : FCN-605Q030-G/S
More informationINTERFACE BOARDS FOR FTP-628DCL/ DSL45X SERIES
INTERFACE BARDS FR FTP-628DCL/ DSL45X SERIES INTERFACE 1. Centronics interface (1) Connector (CN1) Connector part number : BM30B-SRDS-G-TFC (JST) or equivalent Mating connector part number : SHDR-30V-S-B
More informationInstalling circuit and function Flash memory. Near end. switchl. FTP-628DSL603 RS-232C X X X FTP-638MCL103 X FTP-648DSL621 USB/RS232C m m m
FTP628DSL600 Series interface boards for 5V FTP608 Series FTP628DSL600 Series HIGHLIGHTS 5V FTP608 series I/F board for 2, 3 and 4inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) I/F
More information24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302
24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302 INTERFACE 1. Centronics standard (1) Connector (CN10) Connector part number : FCN-605Q030-G/M (Fujitsu Components) or equivalent
More informationFTP-629dcl014/018, DSL034/038
interface boards For 24V FTP-629dcl014/018, DSL034/038 HIGHLIGHTS 24V FTP-609 F board for 2- and 3-inch mechanisms Supports parallel or serial F Supports bar code and graphics Windows 2000/XP, Linux drivers
More informationPRELIMINARY. Interface Type Flash SRAM Cutter Drivers Mechanism Part Number FTP-629DSL350R USB O O O
interface boards for 24V FTP-609 Series HIGHLIGHTS 24V FTP-609 series I/F board for 2- and 3-inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) I/F Supports 2-D bar code and graphics
More informationPRELIMINARY. Part Number Interface Type Drivers Mechanism Part Number FTP-627MCL401. No Flash, SRAM
interface boards for 24V FTP-607 Series FTP-6x7DSL350 Series HIGHLIGHTS 24V FTP-607 I/F board for low profile mechanism and cutter Supports high-speed serial or USB I/F Supports bar code and graphics Windows
More informationFTP-6x7DSL350 Series. for 24V FTP-607 Series FTP-627/637DSL350
interface boards for 24V FTP-607 Series FTP-6x7DSL350 Series HIGHLIGHTS 24V FTP-607 I/F board for low profile mechanism and cutter Supports high-speed serial or USB (2.0) I/F Supports bar code and graphics
More informationfor 24V FTP-609 Series
FTP-629DSL00 Series interface boards for 24V FTP-609 Series FTP-629DSL00 Series HIGHLIGHTS 24V FTP-609 series F board for 2- and -inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) F
More information24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER
24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER FTP-642MCL001/002 FTP-642MCL301/302 OVERVIEW FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal printer driven
More informationfor 24V FTP-609 Series
interface boards for 24V FTP-609 Series DSL100/200 Series HIGHLIGHTS DSL100/200 Series 24V FTP-609 series F board for 2-, 3- and 4-inch mechanisms Supports parallel, serial (RS-232C) or USB (V.1.1) F Supports
More informationInterface USB/RS-232C. 5V, 24V (Windows, Linux, OPOS) FTP-637DSL625 Serial (Windows, Linux, OPOS Yes No
interface boards for 24V FTP-627DSL600 Series HIGHLIGHTS 24V FTP-607 series I/F board for Kiosk printer unit Supports USB (V 1.1) and high speed serial (115kbps) I/F Supports 2-D barcodes and graphics
More information24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW This thermal printer (driven by 24 VDC) and cutter provide high speed printing for 3-inch
More informationNOT FOR NEW DESIGN. FTP628 MCL383, Easy Loading Method (ELM) BATTERY DRIVE, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER WITH CUTTER OVERVIEW
BATTERY DRVE, FTP-608 Series 2 HGH SPEED THERMAL PRNTER WTH CUTTER FTP628 MCL383, Easy Loading Method (ELM) OVERVEW The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal
More information24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW This thermal printer (driven by 24 VDC) provides high speed printing for 2-inch wide paper (60 mm). This printer
More informationBATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD
BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD FTP-624MCL001/002/FTP-624DCL/DSL OVERVIEW FTP-624MCL/FTP-624DCL Series is a high speed line thermal printer driven by battery,
More information24V drive, FTP-609 series
24V drive, FTP-609 series 4" Ultra high speed mechanism FTP-649MCL103/104, Easy Loading Method Overview The easy loading FTP-609 MCL Series is compact ultra high speed, 24V driven thermal printer, printing
More informationbattery drive, 4" high speed thermal printer
battery drive, 4" high speed thermal printer FTP-648MCL103/104, Easy Loading Method FTP-608 series Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,
More informationFTP-629USL010/011 FTP-629USL011* Overview
24V driven receipt, ticket printer 2 KIOSK printer unit FTP-629USL010/011 Overview The FTP-629USL Series is 24V driven receipt printer unit with cutter for 2 inch wide paper. The unit has our high-speed
More informationbattery drive, FTP-608 Series
battery drive, FTP-608 Series 3" high speed thermal printer Easy Loading Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing 3-inch
More informationDISCONTINUED FTP-632UCL531 / USL530 DESIGNATION
24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed
More informationFTP-628MCL113, Easy Load & Mount Method
battery drive, FTP-608 Series 2 high speed thermal printer FTP-628MCL113, Easy Load & Mount Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,
More informationFUJITSU Component Thermal Printer FTP-62GDSL001 series Interface Board
FUJITSU Component Thermal Printer FTP-62GDSL001 series Interface Board Fujitsu interface board for 24V FTP-60G series Features 24V FTP-62G series I/F board for low profile mechanism and cutter Auto cutter
More informationDISCONTINUED in FBR-512WR HAS BEEN DISCONTINUED in 2012
COMPACT POWER RELAY POLE A (FOR AUTOMOTIVE FLASHER LAMP LOAD APPLICATIONS ),2 ( WR) SERIES FEATURES Relay for flasher lamp load (automotive application) newly added to our compact power relay, Series.
More informationDISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES ( SIGNAL HIGH FREQUENCY ) SWITCHING UR1 SERIES FEATURES Subminiature polarized relay Excellent high frequency characteristics Isolation : minimum 60 db } at 900 MHz Insertion loss:
More information2 TYPE MECHANISM (Cutter option)
FTP-629MCL054/353/354-R 24V DRIVE, FTP-609 Series Ultra high speed (200mm/s) 2 TYPE MECHANISM (Cutter option) verview The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing
More informationMaterials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
More informationNOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Flat type relay for surface mounting Super small and light weight Height: 6.5 mm Weight: approximately 1.5 g UL, CSA recognized Conforms
More informationPRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed)
PRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed) Fujitsu 2 high speed (150mm/s)thermal printer unit with cutter option Overview The FTP-62GUSL series thermal printer (driven
More information24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT PRELIMINARY. Height 110 mm, width 81/86 mm, depth 150 mm
24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT FTP-627USL525/526 OVERVIEW The FTP-627 USL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long
More informationMEMORY CARD CONNECTORS (JEIDA CONFORMABLE)
MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) 560H SERIES DRAM CARD CONFORMING TO Ver. 1 FEATURES These connectors conform to the Japan Electronic Industry Development Association (JEIDA) DRAM card Ver. 1.0
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed
More informationRY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength
More informationbattery driven, FTP-608 Series
battery driven, FTP-608 Series 3 high speed thermal printer Overview The FTP-638 MCL Series are 5V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-638 MCL Series
More informationPRELIMINARY FTP-63AUSL001
24V DRIVE, FTP-60A Series Ultra high speed (250mm/s) 3" KISK receipt PRINTER UNIT FTP-63AUSL001 verview The FTP-60AUSL Series thermal printer (driven by 24VDC) provides ultrahigh speed printing (250mm/s)
More information8-Port Intelligent KVM Switch SERVIS FS-1008MT Series NC14004-B082 R
8-Port Intelligent Switch SERVIS FS-1008MT Series NC14004-B082 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or
More information2 TYPE MECHANISM (Cutter option) FTP-629MCL054/353/354-R
24V DRIVE, FTP-609 Series Ultra high speed (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL054/5/54-R verview The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
More information4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 R
-Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server
More information4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042
-Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server
More informationRA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationPC BOARD CONNECTORS 740 SERIES
P ORD ONNETORS 740 SERIES FETURES Various types of headers are available: one side shrouded, both sides shrouded, with simplified latch, and box type. The connector having a simplified latch prevents the
More informationFBR51 Latching Series
FTR-K1 SERIES COMPACT POWER RELAY 2 POLE - 30A (For Automotive Applications) FBR51 Latching Series FEATURES Magnetically latched PCB relay Increased ambient temperature range up to 125C Two coils with
More informationSERVIS TM DRAWER FD-1100MT Series
1U TFT-LCD 17 Multi-Interface Console Drawer SERVIS TM DRAWER FD-1100MT Series The SERVIS TM Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability,
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More informationFTP-628MCL401#01/451#01
BATTERY DRIVEN, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER FTP-628MCL401#01/451#01 OVERVIEW The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628
More informationFTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES
POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation
More informationSERVIS DRAWER FD-1000AT
1U TFTLCD Console Drawer SERVIS DRAWER FD1000AT The SERVIS Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability, and Serviceability. FEATURES
More informationFBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/2 minutes, 30 A/1 hour) Suitable
More informationMaximum Load Current 3A SG Series
Non-promotional not for new designs FTR-K1 SERIES SOLID STATE RELAY Maximum Load Current 3A SG Series FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type - Size: 9.0 (W) 40.0 (L) 20.0(H) mm
More informationBATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable
More informationSILENT RELAY. FTR-P5 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT RELAY 1 POLE - 25A (for automotive applications) FTR-P5 Series FEATURES Low operating sound An original silent mechanism decreases the propagation of operating sound when mounted on
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
More informationCOMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 25A (for automotive applications) FTR-P3 Series FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations,
More informationMAXIMUM LOAD CURRENT 1 A SJ SERIES
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,
More informationFUJITSU Component Thermal Printer FTP-64GMCL153 series
FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing
More informationCOMPACT HIGH POWER RELAY
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 40A (For Automotive Applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface
More informationPreliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - Small high power 60A relay FBR-59-HW FEATURES 1 pole, 60A, 1 form U High temperature grade (-40 C to
More information(a) Relay type FBR51 : FBR51 Series - Standard type (contact gap 0.3 mm) FBR52 : FBR52 Series - Wide contact gap type (contact gap 0.
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 30A (For Automotive Applications) FBR51, 52 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 35 A/10 minutes,
More informationJV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Power Relay JV-KS Series FEATURES Low profile and space saving - Height: 12.5 mm - Mounting space: 175 mm 2 High insulation - Insulation distance: 8 mm - Dielectric
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL103/383
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (200mm/s) for 2-inch
More informationFTR-K1 SERIES POWER RELAY 1 POLE - 25A
POWER RELAY 1 POLE - 25A Latching Relay FTR-K3L Series FTR-K1 SERIES FEATURES 1 pole, 25A, 1 form A 2 coils latching type High insulation (between coil and contacts) Insulation distance: clearance min.
More informationPOWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES
POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series FTR-K1 SERIES FEATURES 2 Pole, 5A 2 Form A Contact gap 1.5mm Sealed type available High insulation in small package (between coil and contact)
More informationFUJITSU Component Thermal Printer FTP-62GUSL001/101-R series (High Speed)
FUJITSU Component Thermal Printer FTP-62GUSL001/101-R series (High Speed) Fujitsu 2 high speed (170mm/s)thermal printer unit with cutter option Overview The FTP-62GUSL series thermal printer (driven by
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism Overview The compact, ultra low profile design FTP-62GMCL series thermal printer (driven
More informationFUJITSU Component Thermal Printer FTP-63HMCL153 series
FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed
More informationFUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method)
FUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method) Fujitsu compact, battery drive, 3 high speed, standalone thermal printer Overview The supply voltage of the FTP-638WSL Series
More informationPOWER RELAY. FTR-K3L-WG Series. 1 POLE - 25A - Latching relay FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - 25A - Latching relay FTR-K3L-WG Series FEATURES 1 pole, 25A 2 coils latching type 1 Form A Contact gap 1.5mm 2.5kV surge breakdown voltage Compliance with European photovoltaic standard
More informationNew relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
More informationSIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism with cutter option Overview The compact, ultra low profile design FTP-62GMCL series thermal
More informationFUJITSU Component Thermal Printer FTP-63GMCL153/453 series
FUJITSU Component Thermal Printer FTP-63GMCL153/453 series Fujitsu 3 high speed (up to 200mm/s) thermal printer mechanism with cutter option Overview The FTP-63GMCL series thermal printer driven by 24VDC
More informationPreliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series FEATURES Low profile and space saving - Height: 15mm - Mounting space:
More informationDISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More informationFTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge
More informationSERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R
SERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R The SERVIS family Cat5 Wide Band Extender enables the user to operate a control console with a high-resolution monitor via Cat5E UTP
More informationmicrogigacn TM Cable I/O Infiniband Cable Assemblies FCN-260(D) Series microgigacn
microgigacn TM Cable I/O Infiniband Cable Assemblies FCN260(D) Series microgigacn Selected by InfiniBand as the I/O Interface Standard for the 4X and 12X FEATURES I/O Connector designed for high speed
More informationMEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International
More informationFUJITSU Component Thermal Printer FTP-628WSL100/200 series (Easy Loading Method)
FUJITSU Component Thermal Printer FTP-628WSL100/200 series (Easy Loading Method) Fujitsu compact, battery drive, 2 high speed, standalone thermal printer Overview The supply voltage of the FTP-628WSL Series
More information1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series FEATURES Working class: B (for IMQ)/ C (for VDE) Type of service: continuous duty Low profile (height 16.5 mm) 1 form A/ 1 form C 10
More informationFUJITSU Component Thermal Printer FTP-63GUSL001#04 series (High Speed)
FUJITSU Component Thermal Printer FTP-63GUSL001#04 series (High Speed) Fujitsu 3 high speed panel mount printer with auto cutter Overview The FTP-63GUSL series thermal printer (driven by 24VDC) provides
More information2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationPOWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal
More information2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
More informationFTP-627MCL053/ V DRIVEN, FTP-607 Series 2 HIGH SPEED THERMAL PRINTER FTP-627MCL053/054 OVERVIEW HIGHLIGHTS
24V DRVEN, FTP-607 Series 2 HGH SPEED THERMAL PRNTER FTP-627MCL053/054 OVERVEW The FTP-627 MCL Series are 24V driven high-speed printers with a 2-inch paper width equivalent. The FTP-627 MCL Series can
More informationPOWER RELAY. FTR-F3 Series 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-F3 P A 012 V [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-F3 Series FEATURES High inrush 50A/80A, TV rating capability Flat and slim power relays - Flat type (right angle type): height: 7mm Mounting
More informationPOWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
More informationULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More information2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part
More informationFTP-628DSL30X Series PRODUCT SPECIFICATION
PRODUCT SPECIFICATION 02 02.05.29 Satou The error in writing is corrected. Maeda 01.02.07 Maeda Satou 1 Application This specifications provide for control oard FTP-628DSL30X series for thermal printer
More information1 POLE - 6A Slim Type (Medium Load Control) (a) Relay type FTR-LY : FTR-LY-Series
POWER RELAY FTR-LY Series FTR-K1 SERIES 1 POLE - 6A Slim Type (Medium Load Control) FEATURES Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) 1 form C and right angle type available Mounting space: 140mm 2, weight:
More information(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 15A VS-NR Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available Working class: C UL class B (130 C) wire class
More information1 POLE - 5A Medium Load Control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high
More information1 POLE 8 A (MEDIUM LOAD CONTROL)
FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form
More informationFTP-637MCL401/411/601
24V, FTP-607 Series 3 HGH SPEED THERML PRNTER Not recommended for New Design: FTP-637MCL601 OVERVEW The FTP-637 MCL series are 24V driven high-speed printers with with a long life, ultra low profile auto
More informationPOWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 20/25/30A - Heavy power control VF Series FEATURES UL, CSA, VDE recognized TV-15 rated 1 form A contact (SPST-NO) Heavy duty 20 to 30A small power
More information