FTP-6x7DSL350 Series. for 24V FTP-607 Series FTP-627/637DSL350
|
|
- Shona Davis
- 5 years ago
- Views:
Transcription
1 interface boards for 24V FTP-607 Series FTP-6x7DSL350 Series HIGHLIGHTS 24V FTP-607 I/F board for low profile mechanism and cutter Supports high-speed serial or USB (2.0) I/F Supports bar code and graphics Windows 2000/XP, Linux drivers UL File No. E RoHS compliant Part numbers Part Number Interface Type Drivers Mechanism Part Number FTP-627DSL351 USB/RS-232C FTP-6x7MCL401/601 FTP-627DSL354 FTP-627DSL356 USB RS-232C FTP-627MCL401 FTP-627DSL364 FTP-627DSL366 FTP-637DSL374 FTP-637DSL376 USB RS-232C USB RS-232C Flash, SRAM Windows 2000/XP, Linux FTP-627MCL601 FTP-637MCL401 FTP-637DSL384 FTP-637DSL386 USB RS-232C FTP-637MCL601 interface specification at host side Item Specifications RS-232C Data speed: Synchronous method: Handshake: Parity: 9.6k, 19.2k, 38.4k, 115.2k, 230.4k, 460.8kbps Full duplex DTR/DSR, XN/XFF control Non, even, odd USB V2.0 Transmission route Interface class: Full speed 12Mbps Printer device Dip switch Setting DSW1 Bit No. Setting Function Setting Remarks inch inch MCL401 MCL601 FF N FF N Factory setting Factory setting RS-232C settings Function Factory Command Baud data bps (50) Parity Non
2 Dimensions Unit: mm 1.2 Control circuit board connector types Symbol Name Function FTP-6X7 DSL351 FTP-627 DSL3x4 / 3x6 FTP-637 DSL3x4 / 3x6 CN1 Power 5V, 24V connection / / CN2 Serial I/F (RS232-C) Serial (RS-232C) connection X / X / CN3 Near end NES switch connection / / CN4 USB USB connection / X / X CN5 Head/motor 2-inch FPC connection / X / X CN6 Head/motor 3-inch FPC connection X / X / CN7 Cutter FPC Cutter connection / / 2
3 CNNECTR PIN ASSIGNMENT of Interface Board 1. Connector for Logic, Head, Motor Power supply (CN1) Board side: SM08B-PASS-TBT (J.S.T) or equivalent ther side: PAP-08VS or equivalent No I/ No I/ 1 +5V I Power 5V 2 GND - 5V ground 3-5 GND - Ground of 24V V I +24V power 2. RS-232C (1) Connector (CN2) Connector part number : S8B-ZR-SM4A-TF (J.S.T.) or equivalent Mating connector part number : ZHR-8 (J.S.T.) or equivalent (2) Connector pin assignment No I/ No. No I/ No. 1 RD Receive data 2 TD Transmission data 3 DTR Data terminal ready 4 GND - ground 5 DSR Data set ready 6 SLCTN Printer Select 7 INPRM Reset 8 ATF Paper feed request Notes: Symbol means a negative logic signal. I or means a signal direction from the interface board side. 3. Connector for Paper Near-End Sensor (CN3) Board side: B3B-PH-SM4-TBT (J.S.T) or equivalent (P.C.B. side) ther side: PHR-3 (J.S.T.) No I/ No I/ 1 +3V Power for logic 3 NC - Not used 2 NES I Paper near-end signal 4. USB standard (1) Connector (CN4) Connector part number : UX60-MB-5ST (Hirose) Mating connector part number : UX40-MB-5P (Hiroseor equivalent) (2) Connector pin assignment No I/ 1 Vbus I Bus power supply 2 D- I/ Differential data I/ D- terminal 3 D+ I/ Differential data I/ D+ terminal 4 N.C. - No connector 5 GND - ground terminal Notes: Symbol means a negative logic signal. I or means a signal direction from the interface board side. 3
4 CNNECTR PIN ASSIGNMENT of Mechanism (FPC) 1. Thermal Head (CN 5) 2. Cutter unit (CN 7) Part number : Molex or equivalent Part number : Molex or equivalent FTP-627MCL401 PIN ASSIGNMENT FTP-627MCL401 PIN ASSIGNMENT No I/ 1 P HK Cathode 2 VSEN Logic power supply 3 P ES Paper out detection signal V Power supply for thermal head 5 HDI Print data in signal 6 STB2 7 STB3 Head energizing control signal 8 + 5V Logic power supply 9 10 Gound of power supply No I/ 4 MT A - Cutter drive signal 5 MT A - 6 MT B - Cutter drive signal 7 MT B - 1 VSEN Logic power supply 2 PHE 3 P HK I Home Position Cathode sensor side of Cutter drive signal Cutter drive signal 8 N.C. - Not connected TM I Thermistor 13 STB1 Head energizing signal 14 LAT Print data latch signal 15 CLK Datacomm clock signal V V Power supply for thermal head 18 GND Ground 19 HUP Head up 20 M T A 21 M T A 22 M T B Phase signal for motor 23 M T B 24 N C Not connected 4
5 CNNECTR PIN ASSIGNMENT of Mechanism (FPC) 1. Thermal Head (CN 6) 2. Cutter unit (CN7) Part number : Molex or equivalent Part number : Molex or equivalent FTP-637MCL401/FTP-6x7MCL601 PIN ASSIGNMENT FTP-637MCL401/601 PIN ASSIGNMENT No 3 P ES Paper out detection signal 8 S TB3/2 9 STB4/3 18 S TB1/NC I/ 27 M T A 28 M T A 29 M T B 30 M T B 1 P HK Cathode 2 VSEN Logic power supply V V V Power supply for thermal head 7 HDI Print data in signal Head energizing signal V Logic power supply T M Thermistor 19 S TB2/1 Ground for thermal head 20 LAT Print data latch signal 21 CLK Datacomm clock signal V V V 25 GND Ground 26 HUP Head up Head energizing signal 1/NC (3/2-inch) Head energizing signal 2/1 (3/2-inch) Power supply for thermal head Phase signal for motor No I/ 4 MT A - Cutter drive signal 5 MT A - 6 MT B - Cutter drive signal 7 MT B - 1 VSEN Logic power supply 2 PHE 3 P HK I Home Position Cathode sensor side of Cutter drive signal Cutter drive signal 8 N.C. - Not connected 5
6 CMMANDS Command HT LF FF ESC EM+n ECS RS ESC SP+n ESC US ESC! + n ESC % + n ESC &+y+c1+c2+x+d1~dn ESC *+m+n1+n2+d1~dn ESC - + n ESC 2 ESC 3+n ESC? + n ESC A+n ESC C+n ESC D+d1~dN+NUL ESC J+n ESC K+n ESC R +n ESC V+n ESC X+m+n ESC c+1+n ESC c+5+n ESC d+n ESC e +n ESC i ESC m Moves print position to the next tab Line feed Feeds forms (new page) Setting the amount of the feeding at automatic paper feed Sets reverse printing Right side character spacing Resets reverse printing Sets print mode External registration character specification/cancellation Download character definition Sets bit image mode Underline setting Sets 1/6 inch line feed length Sets the line feed length External registration character deletion Printer initialization Sets the space between the line Sets the page length by character line Sets the tab position Feeds paper in forward direction and prints Reverse paper feed International character specification Right rotation 90 Setting the turning time of the motor excitation Sets internal processing (including auto paper loading) Panel switch enable/disable setting Printing and n-line feeding Prints and reverse feeds n-lines Full cut Partial cut 6
7 Commands continued Command ECS s+n ECS t+n ESC {+n ESC DEL +n FS!+n* FS &* FS *+m+n1+n2+d1~dn FS -+n FS.* FS 2+c1+c2+d1 to dn FS 9+n FS C+n* FS E+n FS S+n1+n2 FS W+n* FS r+n GS!+n GS &+m+x+y1+y2+d1~dn GS '+m+n GS(E+L1+2+fn+d1~d9) (fm-67) GS < GS A+m+n GS E+n GS L+n1+n2 GS V+m+n GS W+n1+n2 GS a+n GS e+n+m GS h+n GS k+m+n+d1~dn Sets printing speed Character code table selection Sets/resets upside down printing Flash memory erase Kanji printing mode collective specification Kanji printing mode specification High speed collective image printing specified Kanji underline specification/cancellation Kanji printing mode cancellation External character definition Detection function enable/disable setting Kanji code system selection Correction of impressed energy Kanji spacing setting Kanji double height and width mode specification/cancellation Parameter transmission. (Serial Mode only). Character size specification Registration of image data Prints registered image data RS-232C Communication setting Line feeds to the next mark Sets the line feed length after mark detection Sets print quality. Left margin position setting Paper cutting (for pending cutter models only) Print area width setting Setting and cancellation of auto status transmission (serial mode only). Sets bar code width Sets bar code height Selects bar code type and prints 7
8 PTINS 1. Cables Name P art Number Length (mm) Interface Cable (between board and equipment) For USB (CN4) FTP-629Y (19.7 inches) For RS232C (CN2) FTP-628Y (19.7 inche s) P ower supply cable Logic, Head/motor (CN1) FTP-629Y (11.8 inches) 2. Driver LSI of Control Board Name Part Number Quantity / Tray Remarks MCU FTP-627CU n board Flash/SRAM 3. Paper holder Name Part number Paper Flange Paper Stand FTP-040HF FTP-040HS Fujitsu Components International Headquarter ffices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) promothq@fcl.fujitsu.com Web: North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1-408) Fax: (1-408) components@us.fujitsu.com Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) fcal@fcal.fujitsu.com Web: Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 25,
PRELIMINARY. Part Number Interface Type Drivers Mechanism Part Number FTP-627MCL401. No Flash, SRAM
interface boards for 24V FTP-607 Series FTP-6x7DSL350 Series HIGHLIGHTS 24V FTP-607 I/F board for low profile mechanism and cutter Supports high-speed serial or USB I/F Supports bar code and graphics Windows
More informationINTERFACE BOARDS FOR FTP-628DCL/ DSL45X SERIES
INTERFACE BARDS FR FTP-628DCL/ DSL45X SERIES INTERFACE 1. Centronics interface (1) Connector (CN1) Connector part number : BM30B-SRDS-G-TFC (JST) or equivalent Mating connector part number : SHDR-30V-S-B
More informationfor 24V FTP-609 Series
FTP-629DSL00 Series interface boards for 24V FTP-609 Series FTP-629DSL00 Series HIGHLIGHTS 24V FTP-609 series F board for 2- and -inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) F
More informationPRELIMINARY. Interface Type Flash SRAM Cutter Drivers Mechanism Part Number FTP-629DSL350R USB O O O
interface boards for 24V FTP-609 Series HIGHLIGHTS 24V FTP-609 series I/F board for 2- and 3-inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) I/F Supports 2-D bar code and graphics
More informationInstalling circuit and function Flash memory. Near end. switchl. FTP-628DSL603 RS-232C X X X FTP-638MCL103 X FTP-648DSL621 USB/RS232C m m m
FTP628DSL600 Series interface boards for 5V FTP608 Series FTP628DSL600 Series HIGHLIGHTS 5V FTP608 series I/F board for 2, 3 and 4inch mechanisms Supports USB (V 2.0) and high speed serial (460kbps) I/F
More informationFTP-629dcl014/018, DSL034/038
interface boards For 24V FTP-629dcl014/018, DSL034/038 HIGHLIGHTS 24V FTP-609 F board for 2- and 3-inch mechanisms Supports parallel or serial F Supports bar code and graphics Windows 2000/XP, Linux drivers
More information24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012
24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012 FOR FTP-622/632/642MCL001/002/301/302/303/304 INTERFACE 1. Centronics (1) Connector (CN1) Connector part number : FCN-605Q030-G/S
More informationInterface USB/RS-232C. 5V, 24V (Windows, Linux, OPOS) FTP-637DSL625 Serial (Windows, Linux, OPOS Yes No
interface boards for 24V FTP-627DSL600 Series HIGHLIGHTS 24V FTP-607 series I/F board for Kiosk printer unit Supports USB (V 1.1) and high speed serial (115kbps) I/F Supports 2-D barcodes and graphics
More informationINTERFACE BOARD FTP-608 SERIES FTP-628DCL/DSL SERIES
INTERFACE BOARD FTP608 SERIES FTP628DCL/DSL SERIES INTERFACE 1. Centronics interface (1) Connector (CN2) Connector part number : BM30BSRDSGTF (JST) or equivalent Mating connector part number : SHDR30VSB
More informationfor 24V FTP-609 Series
interface boards for 24V FTP-609 Series DSL100/200 Series HIGHLIGHTS DSL100/200 Series 24V FTP-609 series F board for 2-, 3- and 4-inch mechanisms Supports parallel, serial (RS-232C) or USB (V.1.1) F Supports
More informationFUJITSU Component Thermal Printer FTP-62GDSL001 series Interface Board
FUJITSU Component Thermal Printer FTP-62GDSL001 series Interface Board Fujitsu interface board for 24V FTP-60G series Features 24V FTP-62G series I/F board for low profile mechanism and cutter Auto cutter
More informationbattery drive, 4" high speed thermal printer
battery drive, 4" high speed thermal printer FTP-648MCL103/104, Easy Loading Method FTP-608 series Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,
More informationFTP-629USL010/011 FTP-629USL011* Overview
24V driven receipt, ticket printer 2 KIOSK printer unit FTP-629USL010/011 Overview The FTP-629USL Series is 24V driven receipt printer unit with cutter for 2 inch wide paper. The unit has our high-speed
More information24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302
24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302 INTERFACE 1. Centronics standard (1) Connector (CN10) Connector part number : FCN-605Q030-G/M (Fujitsu Components) or equivalent
More information24V drive, FTP-609 series
24V drive, FTP-609 series 4" Ultra high speed mechanism FTP-649MCL103/104, Easy Loading Method Overview The easy loading FTP-609 MCL Series is compact ultra high speed, 24V driven thermal printer, printing
More information2 TYPE MECHANISM (Cutter option)
FTP-629MCL054/353/354-R 24V DRIVE, FTP-609 Series Ultra high speed (200mm/s) 2 TYPE MECHANISM (Cutter option) verview The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing
More informationbattery drive, FTP-608 Series
battery drive, FTP-608 Series 3" high speed thermal printer Easy Loading Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing 3-inch
More informationPRELIMINARY FTP-63AUSL001
24V DRIVE, FTP-60A Series Ultra high speed (250mm/s) 3" KISK receipt PRINTER UNIT FTP-63AUSL001 verview The FTP-60AUSL Series thermal printer (driven by 24VDC) provides ultrahigh speed printing (250mm/s)
More informationFTP-628MCL113, Easy Load & Mount Method
battery drive, FTP-608 Series 2 high speed thermal printer FTP-628MCL113, Easy Load & Mount Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,
More information24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT PRELIMINARY. Height 110 mm, width 81/86 mm, depth 150 mm
24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT FTP-627USL525/526 OVERVIEW The FTP-627 USL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long
More informationPRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed)
PRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed) Fujitsu 2 high speed (150mm/s)thermal printer unit with cutter option Overview The FTP-62GUSL series thermal printer (driven
More information24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER
24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER FTP-642MCL001/002 FTP-642MCL301/302 OVERVIEW FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal printer driven
More information4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 R
-Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server
More information2 TYPE MECHANISM (Cutter option) FTP-629MCL054/353/354-R
24V DRIVE, FTP-609 Series Ultra high speed (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL054/5/54-R verview The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing
More information8-Port Intelligent KVM Switch SERVIS FS-1008MT Series NC14004-B082 R
8-Port Intelligent Switch SERVIS FS-1008MT Series NC14004-B082 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or
More information4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042
-Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server
More informationDISCONTINUED FTP-632UCL531 / USL530 DESIGNATION
24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed
More informationbattery driven, FTP-608 Series
battery driven, FTP-608 Series 3 high speed thermal printer Overview The FTP-638 MCL Series are 5V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-638 MCL Series
More informationNOT FOR NEW DESIGN. FTP628 MCL383, Easy Loading Method (ELM) BATTERY DRIVE, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER WITH CUTTER OVERVIEW
BATTERY DRVE, FTP-608 Series 2 HGH SPEED THERMAL PRNTER WTH CUTTER FTP628 MCL383, Easy Loading Method (ELM) OVERVEW The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal
More informationBATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD
BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD FTP-624MCL001/002/FTP-624DCL/DSL OVERVIEW FTP-624MCL/FTP-624DCL Series is a high speed line thermal printer driven by battery,
More informationFUJITSU Component Thermal Printer FTP-62GUSL001/101-R series (High Speed)
FUJITSU Component Thermal Printer FTP-62GUSL001/101-R series (High Speed) Fujitsu 2 high speed (170mm/s)thermal printer unit with cutter option Overview The FTP-62GUSL series thermal printer (driven by
More informationSERVIS TM DRAWER FD-1100MT Series
1U TFT-LCD 17 Multi-Interface Console Drawer SERVIS TM DRAWER FD-1100MT Series The SERVIS TM Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability,
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL103/383
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (200mm/s) for 2-inch
More information24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW This thermal printer (driven by 24 VDC) and cutter provide high speed printing for 3-inch
More informationBATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable
More informationFUJITSU Component Thermal Printer FTP-63GUSL001#04 series (High Speed)
FUJITSU Component Thermal Printer FTP-63GUSL001#04 series (High Speed) Fujitsu 3 high speed panel mount printer with auto cutter Overview The FTP-63GUSL series thermal printer (driven by 24VDC) provides
More information24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW This thermal printer (driven by 24 VDC) provides high speed printing for 2-inch wide paper (60 mm). This printer
More informationFTP-628MCL401#01/451#01
BATTERY DRIVEN, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER FTP-628MCL401#01/451#01 OVERVIEW The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628
More informationMEMORY CARD CONNECTORS (JEIDA CONFORMABLE)
MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) 560H SERIES DRAM CARD CONFORMING TO Ver. 1 FEATURES These connectors conform to the Japan Electronic Industry Development Association (JEIDA) DRAM card Ver. 1.0
More informationSERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R
SERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R The SERVIS family Cat5 Wide Band Extender enables the user to operate a control console with a high-resolution monitor via Cat5E UTP
More informationFUJITSU Component Thermal Printer FTP-64GMCL153 series
FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism Overview The compact, ultra low profile design FTP-62GMCL series thermal printer (driven
More informationFUJITSU Component Thermal Printer FTP-63GMCL153/453 series
FUJITSU Component Thermal Printer FTP-63GMCL153/453 series Fujitsu 3 high speed (up to 200mm/s) thermal printer mechanism with cutter option Overview The FTP-63GMCL series thermal printer driven by 24VDC
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism with cutter option Overview The compact, ultra low profile design FTP-62GMCL series thermal
More informationFUJITSU Component Thermal Printer FTP-63HMCL153 series
FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed
More informationFBR51 Latching Series
FTR-K1 SERIES COMPACT POWER RELAY 2 POLE - 30A (For Automotive Applications) FBR51 Latching Series FEATURES Magnetically latched PCB relay Increased ambient temperature range up to 125C Two coils with
More informationMaximum Load Current 3A SG Series
Non-promotional not for new designs FTR-K1 SERIES SOLID STATE RELAY Maximum Load Current 3A SG Series FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type - Size: 9.0 (W) 40.0 (L) 20.0(H) mm
More informationFUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method)
FUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method) Fujitsu compact, battery drive, 3 high speed, standalone thermal printer Overview The supply voltage of the FTP-638WSL Series
More informationMaterials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
More informationMAXIMUM LOAD CURRENT 1 A SJ SERIES
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high
More informationFBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/2 minutes, 30 A/1 hour) Suitable
More informationCOMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 25A (for automotive applications) FTR-P3 Series FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations,
More informationSILENT RELAY. FTR-P5 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT RELAY 1 POLE - 25A (for automotive applications) FTR-P5 Series FEATURES Low operating sound An original silent mechanism decreases the propagation of operating sound when mounted on
More informationPreliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series FEATURES Low profile and space saving - Height: 15mm - Mounting space:
More informationFTP-627MCL053/ V DRIVEN, FTP-607 Series 2 HIGH SPEED THERMAL PRINTER FTP-627MCL053/054 OVERVIEW HIGHLIGHTS
24V DRVEN, FTP-607 Series 2 HGH SPEED THERMAL PRNTER FTP-627MCL053/054 OVERVEW The FTP-627 MCL Series are 24V driven high-speed printers with a 2-inch paper width equivalent. The FTP-627 MCL Series can
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
More informationFTR-K1 SERIES POWER RELAY 1 POLE - 25A
POWER RELAY 1 POLE - 25A Latching Relay FTR-K3L Series FTR-K1 SERIES FEATURES 1 pole, 25A, 1 form A 2 coils latching type High insulation (between coil and contacts) Insulation distance: clearance min.
More informationJV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Power Relay JV-KS Series FEATURES Low profile and space saving - Height: 12.5 mm - Mounting space: 175 mm 2 High insulation - Insulation distance: 8 mm - Dielectric
More informationPOWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES
POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series FTR-K1 SERIES FEATURES 2 Pole, 5A 2 Form A Contact gap 1.5mm Sealed type available High insulation in small package (between coil and contact)
More informationNew relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
More informationSIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage
More informationPreliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - Small high power 60A relay FBR-59-HW FEATURES 1 pole, 60A, 1 form U High temperature grade (-40 C to
More informationCOMPACT HIGH POWER RELAY
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 40A (For Automotive Applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface
More informationPOWER RELAY. FTR-K3L-WG Series. 1 POLE - 25A - Latching relay FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - 25A - Latching relay FTR-K3L-WG Series FEATURES 1 pole, 25A 2 coils latching type 1 Form A Contact gap 1.5mm 2.5kV surge breakdown voltage Compliance with European photovoltaic standard
More information(a) Relay type FBR51 : FBR51 Series - Standard type (contact gap 0.3 mm) FBR52 : FBR52 Series - Wide contact gap type (contact gap 0.
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 30A (For Automotive Applications) FBR51, 52 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 35 A/10 minutes,
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More information2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationDISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationFTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge
More informationFTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES
POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation
More information1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series FEATURES Working class: B (for IMQ)/ C (for VDE) Type of service: continuous duty Low profile (height 16.5 mm) 1 form A/ 1 form C 10
More informationULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More information2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
More informationFUJITSU Component Thermal Printer FTP-628WSL100/200 series (Easy Loading Method)
FUJITSU Component Thermal Printer FTP-628WSL100/200 series (Easy Loading Method) Fujitsu compact, battery drive, 2 high speed, standalone thermal printer Overview The supply voltage of the FTP-628WSL Series
More informationPOWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
More informationSERVIS DRAWER FD-1000AT
1U TFTLCD Console Drawer SERVIS DRAWER FD1000AT The SERVIS Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability, and Serviceability. FEATURES
More informationPOWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal
More information(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 15A VS-NR Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available Working class: C UL class B (130 C) wire class
More information1 POLE - 5A Medium Load Control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in
More informationMEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International
More informationPOWER RELAY. FTR-F3 Series 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-F3 P A 012 V [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-F3 Series FEATURES High inrush 50A/80A, TV rating capability Flat and slim power relays - Flat type (right angle type): height: 7mm Mounting
More information1 POLE - 6A Slim Type (Medium Load Control) (a) Relay type FTR-LY : FTR-LY-Series
POWER RELAY FTR-LY Series FTR-K1 SERIES 1 POLE - 6A Slim Type (Medium Load Control) FEATURES Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) 1 form C and right angle type available Mounting space: 140mm 2, weight:
More informationNOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Flat type relay for surface mounting Super small and light weight Height: 6.5 mm Weight: approximately 1.5 g UL, CSA recognized Conforms
More informationFTP-637MCL401/411/601
24V, FTP-607 Series 3 HGH SPEED THERML PRNTER Not recommended for New Design: FTP-637MCL601 OVERVEW The FTP-637 MCL series are 24V driven high-speed printers with with a long life, ultra low profile auto
More informationDISCONTINUED in FBR-512WR HAS BEEN DISCONTINUED in 2012
COMPACT POWER RELAY POLE A (FOR AUTOMOTIVE FLASHER LAMP LOAD APPLICATIONS ),2 ( WR) SERIES FEATURES Relay for flasher lamp load (automotive application) newly added to our compact power relay, Series.
More informationmicrogigacn TM Cable I/O Infiniband Cable Assemblies FCN-260(D) Series microgigacn
microgigacn TM Cable I/O Infiniband Cable Assemblies FCN260(D) Series microgigacn Selected by InfiniBand as the I/O Interface Standard for the 4X and 12X FEATURES I/O Connector designed for high speed
More informationDISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES ( SIGNAL HIGH FREQUENCY ) SWITCHING UR1 SERIES FEATURES Subminiature polarized relay Excellent high frequency characteristics Isolation : minimum 60 db } at 900 MHz Insertion loss:
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
More informationFTP-627MCL401/411/601
24V DRVEN, FTP-607 Series 2 HGH SPEED THERML PRNTER FTP-627MCL401/411/601 Not Recommended for New Design: FTP-627MCL601 OVERVEW The FTP-627 MCL Series are 24V driven high-speed printers with a ultra low
More informationPOWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 20/25/30A - Heavy power control VF Series FEATURES UL, CSA, VDE recognized TV-15 rated 1 form A contact (SPST-NO) Heavy duty 20 to 30A small power
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed
More information(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with type), RTIII K : Plastic sealed type, RTIII
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation Type of service:
More informationRA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationRY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength
More informationDDR-3 DIMM Vertical Mount Socket
Not for New Designs DDR-3 DIMM Vertical Mount Socket FCN-07 Series FEATURES DDR-3: 240pin DIMM socket connector (press-fit or through hole type) Fujitsu original unique structure for twin contact points
More informationDS-800. ::: Receipt Printer User s manual :::
DS-800 ::: Receipt Printer User s manual ::: All specifications are subjected to change without notice TABLE OF CONTENTS 1. Parts Identifications 2 2. Setting up the printer 3 2.1 Unpacking 3 2.2 Connecting
More information