CS Certification Virtual Course

Transcription

1 Who is this course for? Carrier field technicians, project engineers, distributors or Carrier contractor employees who are looking to better utilize their skills with i- Vu Tech Tools 6.5, VVT Control Systems, and VAV Control Systems. Format Instructor-led virtual training with extensive hands-on tasks (no travel required). Using video tutorials as the on-demand instructor through the BAS University LMS, learners will: Execute the workbook tasks and upload their assignments to be graded by a live instructor Ask questions as they arise through the discussion board, where a dedicated Factory or Factory Certified instructor will facilitate Complete the same tasks that are taught in the live, instructorled class Take the Factory Certified Exams for CS Certification Length At your own pace, max 30 days to complete exercises and final exams Requirements You will need a laptop and mouse with these requirements: 2 GHz processor 2 GB RAM (minimum 4 suggested) 30 Gigabyte Hard drive with 2 GB Disk Space free 1 USB Port DVD Drive Internet Explorer 8, 9 and 10 Google Chrome v44.0 Windows 8 Enterprise and Professional (32 or 64 bit) Windows 7 Pro or Ultimate (32 or 64 bit) Windows Vista Business or Ultimate Editions (32 or 64 bit) You will also need the following hardware: i-vu Tech Tools (part number: USB-TKIT) version 6.5 with latest patches. Ethernet/Patch Cable CS Training case or equivalent

2 Objectives This class provides the participant with the skills needed to install and proficiently use the i-vu Tech Tool suite. This class provides the participant with the skills needed for networking fundamentals of an Open Controller network. This class provides the participant with the skills needed to install, wire and configure a VVT and VAV systems. Course Outline Addressing Controllers in an Open Controller Network MS/TP Networks Check 7 Different Control Modules Communications Check Device Instance i-vu Tech Tools 6.5 Installation Install i-vu Tools Install Apploader Install Test and Balance Install Alarm Notification Client Copy Utilities Folder Login to HVACPartners.com Download Cumulative updates and Sal files Copy Sal Files into i-vu Tools Submit your System Files to BAS University Configure a Router/Link (using PuTTY ) Set the Routers Dip Switches Get PuTTY Ready Change the Routers Configuration Laptop Setup and Field Assistant Update Re-address the Router Prepare the Computer for Communications Launch FA 6.5 Install the Latest Cumulative Patches Field Assistant, Preparing a New Site Launch Field Assistant Find Devices Field Assistant Site Setup Time Broadcasting Graphic Interface Scheduling Trends Reports

3 Global Modify Optimizing Downloads Marker or Full Source downloads Exporting Source Files Importing Source files Apploader Clip the AppController Equipment Builder Create a new Folder Start Equipment Builder Create Equipment Add a Control Program Commission the Program Configure Hardware Inputs and Output Manipulate a Few Values Getting a little more familiar Manual Command Modstat Manual Command PING RTU Open lab Configure RTU Open Change/Lock Values for simulation RTU Open PID parameter adjustments Adjust PID Loops for VVT Zoning System Search for econ_pid-da Search for clg_pid_da Search for htg_pid_ra VVT Bypass lab Configure VVT Bypass Controller VVT Terminal Unit lab Configure a VVT Zone Controller VVT Master Terminal Unit lab Configure Airside Linkage Verify Linkage is Active RTU Open, Verify Linkage Air Source (AppController) Configure the I/O Channels Scheduling Checkout Notes and Reports Submit your I/O assignments

4 VAVB1 Zone Terminal lab VAVB1 Configuration Activate the ZS Sensor VAVB3 Zone Terminal Unit lab VAVB3 Configuration VAV Master Terminal Unit lab Configure VAV Airside Linkage Setup a Rogue Zone Verify Linkage is Working Single Point Linkage Submit Airside Linkage Verification Test and Balance Connect Test and Balance Tool Running Test and Balance Clear Parameter Mismatches in Field Assistant System Touch Access the System Touch Setup Menu Change the Admin Password Configure Sensor Setup Configure Inactivity Timeout Discover Control Modules Create Group Schedules Equipment Touch Attach to an Open Controller from the System Touch View Alarm Sources View Schedules View Trends Equipment Properties Menu View Active Alarm Buffer Factory Reset Default settings 2018 Carrier Corporation. All rights reserved. Carrier and i-vu are registered trademarks of Carrier Corporation. All other trademarks are the property of their respective owners.

5