24V 18 ~ 24V 18V 13.5 ~ 18V 1.1A 0.8A 0.55A 0 ~ 1.1A 0 ~ 0.8A 0 ~ 0.55A. 19.8W 19.2W 19.8W 3.0Vp-p 3.0Vp-p 3.0Vp-p 81% 82% 83% 83.

Transcription

1 SPECIFICATION MODEL PLN PLN PLN PLN OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE LED OPERATION VOLTAGE Note.5 RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max.) Note.2 2.5Vp-p VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR EFFICIENCY(Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE MTBF DIMENSION PACKING Note.4 90 ~ 277VAC 127~392VDC Note.5 12V 9 ~ 12V 1.6A 0 ~ 1.6A CURRENT ADJ. RANGE 75% ~ 100% 19.2W 10% 3.0% 10% 18V 13.5 ~ 18V 2300ms / 230VAC 3000ms / 115VAC at full load 47 ~ 63Hz 0.4A/115VAC 40A/230VAC 0.5mA / 240VAC 95 ~ 110% 0.2A/230VAC 24V 18 ~ 24V 36V 1.1A 0.8A 0.55A 0 ~ 1.1A 0 ~ 0.8A 0 ~ 0.55A 19.8W 19.2W 19.8W 3.0Vp-p 3.0Vp-p 3.0Vp-p Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 14 ~ 16V 19 ~ 22V 27 ~ 34V 41 ~ 46V 54 ~ 60V Protection type : Shut off o/p voltage, clamping by zener diode (TSW1) -30 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.06%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3.75KVAC I/P-O/P:100M Ohms/500VDC / 25 / 70%RH EMI CONDUCTION & RADIATION Compliance to EN55015 HARMONIC CURRENT Compliance to EN Class C( 75% load);en EMS IMMUNITY Compliance to EN ,3,4,5,6,8,11;EN61547, light industry level, criteria A 27 ~ 36V IEC , IEC , TUV EN , EN , UL8750, IP64 approved 643.6Khrs min. MIL-HDBK-217F (25 ) 148.5*38.5*28mm (L*W*H) 0.18Kg; 60pcs/12.8Kg/0.9CUFT IP64 PLN V 36 ~ 48V 0.42A 0 ~ 0.42A 20.2W 3.8Vp-p PF 0.9 at 75~100% load, 115VAC/230VAC 80% 81% 82% 83% 83.5% Protection type : Shut down o/p voltage, recovers automatically after temperature goes down File Name:PLN-20-SPEC

2 Mechanical Specification Case No.989B Unit:mm AC/L(Brown) AC/N(Blue) AWG 2C 10 2-R AWG 2C +V(Red) -V(Black) Block Diagram I/P EMI FILTER & RECTIFIERS POWER SWITCHING RECTIFIERS & FILTER O.C.P. +V -V O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. O.T.P. Derating Curve Static Characteristics Ta: LOAD (%) LOAD (%) AMBIENT TEMPERATURE ( ) (HORIZONTAL) INPUT VOLTAGE (V) 60Hz File Name:PLN-20-SPEC

3 Power Factor Characteristic Power factor will be higher than 0.9 when output loading is 75% or higher. Constant Current Mode PF LOAD 230VAC 110VAC EFFICIENCY vs LOAD (48V Model) possess superior working efficiency that up to 83.5% can be reached in field applications. EFFICIENCY (%) 230VAC 110VAC LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode [with LED driver, at area (A)] and CC mode [direct drive, at area (B)]. 100 Vo(%) (A) Constant Voltage area (B) Constant Current area 50 (max.) (C) Hiccup Protection Io (%) Typical LED power supply I-V curve File Name:PLN-20-SPEC

4 MODEL:PLN OUTPUT FUNCTION TEST 1 RIPPLE & NOISE V1: 3.0 Vp-p (Max ) V1: 0.80 Vp-p (Max ) 2 OUTPUT VOLTAGE ADJUST RANGE CH1: A ~ 0.55A I/P:115VAC O/P:MIN LOAD 0.232A~0.546A/230VAC 0.243A~0.548A/115VAC 3 OUTPUT VOLTAGE TOLERANCE V1: -10 %~+10 % (Max) I/P: 100VAC / 277 VAC O/P:FULL/ 0% LOAD V1: -4.89%~ % 4 LINE REGULATION V1: -3 %~ +3 % (Max) I/P: 100 VAC ~ 277VAC V1: %~ % 5 LOAD REGULATION V1: -10 %~ +10 % (Max) O/P:FULL ~MIN LOAD V1: %~ % 6 SET UP TIME 230VAC/ 2300 ms (Max) 115VAC/ 3000 ms (Max) I/P: 115 VAC 7 OVER/UNDERSHOOT TEST < ±10 % 8 DYNAMIC LOAD V1: 3600 mvp-p O/P: (1)FULL /Min LOAD 90%DUTY/1KHZ (2)FULL /Min LOAD 50%DUTY/120HZ 230 VAC/ ms 115 VAC/ ms TEST: % -1.67% (1) 740 mvp-p (2) 1000 mvp-p Model: PLN Test Report 1 / 5

5 INPUT FUNCTION TEST 1 INPUT VOLTAGE RANGE 90 VAC~ 277 VAC I/P:TESTING I/P: LOW-LINE-3V= 87 HIGH-LINE+15%= 300 V O/P:FULL/MIN LOAD ON: 30 Sec. OFF: 30 Sec V 10MIN ( AC POWER ON/OFF NO DAMAGE ) TEST: 90 V~ 277 V OK 2 INPUT FREQUENCY RANGE 47HZ ~63 HZ NO DAMAGE OSC 3 POWER FACTOR PF 0.9 at 75%~100% load 115VAC/230VAC I/P: 90 VAC ~277 VAC O/P:FULL~MIN LOAD I/P: 115 VAC 4 EFFICIENCY 83 % (Typ) 5 INPUT CURRENT 230 V/ 0.2 A (Typ) 115 V/ 0.4 A (Typ) 6 INRUSH CURRENT 230 V/ 40 A (Typ) COLD START I/P: 115 VAC TEST: OK PF= / 230VAC 100% PF= / 230VAC 100% PF= / 230VAC 75% PF= / 230VAC 75% 86.1 % I = A/ 230VAC I = A/ 115VAC I = 14.8 A/ 230VAC PROTECTION FUNCTION TEST 1 OVER LOAD PROTECTION 95%~ 110 % RATED OUTPUT POWER I/P: 277 VAC I/P: 100 VAC O/P:TESTING %/277VAC %/ 230VAC %/ 100 VAC Hiccup Mode 2 OVER VOLTAGE PROTECTION CH1: 41 V~ 46 V O/P:MIN LOAD 44.3 V/ 230VAC Shut off o/p voltage,clamping by zener diode 3 OVER TEMPERATURE PROTECTION SPEC: TSW1= 110 ±10 O.T.P. NO DAMAGE O.T.P. Active Shut down o/p voltage,recovers automatically after temperature goes down 4 SHORT PROTECTION SHORT EVERY OUTPUT 1 HOUR NO DAMAGE I/P: 277 VAC O/P: FULL LOAD NO DAMAGE Hiccup Mode Model: PLN Test Report 2 / 5

6 ENVIRONMENT TEST 1 TEMPERATURE RISE TEST MODEL: PLN ROOM AMBIENT BURN-IN: 2 HRS O/P: 100% LOAD Ta= HIGH AMBIENT BURN-IN: 2 HRS O/P: 100% LOAD Ta= 49.4 NO Position P/N ROOM AMBIENT Ta= 28.5 HIGH AMBIENT Ta= BD1 KBP208G C8 224/450V Q1 2SK D1 BYV26EGP ZD1 P6KE150A T1 TF D100 FCF10A C16 100u/35V YXF C125 22u/50V YXM C u/50V KY U1 L6561D TSW1 NTC 220KΩ CASE UP CASE LF1 TR L1 TR OVER LOAD BURN-IN TEST NO DAMAGE 3 LOW TEMPERATURE TURN ON TEST 1 HOUR ( MIN ) O/P: 108 % LOAD TURN ON AFTER 2 HOUR O/P: 100 % LOAD Ta= -30 TEST: TEST: OK OK 4 HIGH HUMIDITY HIGH TEMPERATURE HIGH VOLTAGE TURN ON TEST 5 TEMPERATURE COEFFICIENT AFTER 12 HOURS IN CHAMBER ON CONTROL 50 I/P: 277 VAC Ta= 50 NO DAMAGE HUMIDITY= 95 %R.H ±0.06 %(0~50 ) 6 VIBRATION TEST 1 Carton & 1 Set Operating at I/P: VAC NO LOAD (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) TEST: OK ± %(0~50 ) TEST: OK M.T.B.F & LIFE CYCLE CALCULATION 1 CAPACITOR PLN-20-36:SUPPOSE C 105 IS THE MOST CRITICAL COMPONENT LIFE CYCLE Ta= 25 LIFE TIME= HRS Ta= 50 LIFE TIME= HRS 2 MTBF MIL-HDBK-217F NOTICES2 PARTS COUNT TOTAL FAILURE RATE: 643.6K HRS Model: PLN Test Report 3 / 5

7 SAFETY TEST 1 WITHSTAND VOLTAGE I/P-O/P: 3.75 KVAC/min I/P-O/P: 4.2 KVAC/min I/P-O/P: ma EN NO DAMAGE 2 ISOLATION RESISTANCE I/P-O/P:500VDC>100MΩ I/P-O/P: 500 VDC I/P-O/P: >9999 NO DAMAGE MΩ 3 LEAKAGE CURRENT < 0.5 ma / 240VAC EN I/P: 277 VAC O/P:NO LOAD L-FG: N-FG: ma ma E.M.C TEST 1 HARMONIC EN CLASS C 2 CONDUCTION EN55022 CLASS B I/P: 230/240/220 VAC/50HZ O/P:100%/75%/50%/25% LOAD I/P:230 VAC (50HZ) /115V(60HZ) O/P:FULL/50% LOAD Test by certified Lab 3 RADIATION EN55022 CLASS B 4 E.S.D EN LIGHT INDUSTRY AIR:8KV / Contact:4KV (50HZ)/115V(60HZ) /50HZ Test by certified Lab CRITERIA A 5 E.F.T EN LIGHT INDUSTRY INPUT: 1KV /50HZ CRITERIA A 6 SURGE IEC LIGHT INDUSTRY L-N :1KV /50HZ CRITERIA A 7 Test by certified Lab & Test Report Prepare Model: PLN Test Report 4 / 5

8 COMPONENT STRESS TEST 1 Power Transistor ( D to S) or (C to E) Peak Voltage Q 1 Rated 2SK3532 : 900 V 6 A 2 Diode Peak Voltage D 100 Rated 3 Clamp Diode Peak Voltage D 1 Rated 4 Control IC Voltage Test U 1 Rated FCF10A40 : 400 V 10 A BYV26EGP : 1000 V 2 A L6561D : 18 U 100 Rated AP4310 : 40 V V I/P:High-Line +3V = 280 V O/P: (1)Full Load Turn on (2)Output Short (3)Dynamic Load 50% Load/ (4)Dynamic Load Full Load/ I/P:High-Line +3V = 280 V O/P: (1)Full Load Turn on (2)Output Short (3)Dynamic Load 50% Load/ (4)Dynamic Load Full Load/ I/P:High-Line +3V = 280 V O/P: (1)Dynamic Load 50% Load/ (2)Dynamic Load Full Load/ I/P:High-Line +3V =280 V O/P: (1) Output Short (2)O.L.P (3)O.V.P (4)NO LOAD VR 下限 LOW LINE (1) 590 V (2) 690 V (3) 570 V (4) 590 V (1) 194 V (2) 215 V (3) 197 V (4) 201 V (1) 484 V (2) 484 V U1 U100 (1) 12.2 V (1) 5.1 V (2) 12.2 V (2) 4.5 V (3) 10.4 V (3) 7.8 V (4) 14.9 V (4) 12.2 V DATE SAMPLE TEST RESULT TESTER APPROVAL 2009/7/14 RD SAMPLE SKY LIUWY 2010/2/4 PRODUCT SAMPLE (W0911C083) SKY LIUWY 2007/11/26 A50-G058 Model: PLN Test Report 5 / 5