Photoelectric Sensors Prism Series

Transcription

1 PG.05E..T.E August 007 High Perfmance 8 mm Tubular Senss with a Flexible Isolated Contents Overview Model Selection, Senss Model Selection, Compatible Connect Cables Wiring Diagrams Model Selection, Accessies Specifications Dimensions Industry Standard 8 mm Threaded Body with Flat Sides f Mounting Flexibility Fward and Right-Angle Viewing Models Have Identical Optical Perfmance AC and DC Operation in the Same Unit Visible Alignment Aid f Thru-Beam Models The Cutler-Hammer from Eaton s electrical business is a cost-effective line of miniature photoelectric senss with twice the optical gain of other senss in this product class. Fward and rightangle viewing models feature identical gain and optical characteristics f the best fit on your machine. A gain control allows quick adjustment f peak optical perfmance in a variety of applications. Four sensing modes are available, including polarized reflex to eliminate reliability problems when sensing shiny objects. Visible red sensing beams throughout the allow you to see exactly where the senss are aimed f easier setup. Models are available preconfigured in either Light Dark Operate modes. The unique threaded body with flat sides allows quick mounting in a / inch hole against any flat surface. Internal components are rigidly sealed in a solid encapsulated package f excellent perfmance in high-vibration and high-shock applications. Page f details on the Series flexible isolated output. Approvals UL Recognized C-UL Recognized Visible Red Beams on All and Diffuse Models Product Features Small size f use in a wide variety of applications and locations High sensing power f longer ranges and resistance to dust and dirt Adjustable gain control to ensure peak optical perfmance High noise immunity which greatly reduces problems associated with electrical noise AC/DC models which allow you to der and stock one model f both voltages DC only models which er lower cost options in all sensing modes Isolated outputs f wiring flexibility Sht circuit protection Quick ms response time on all models Highly visible output status LED Built-in cable models allow f lowest cost wiring Micro-connect models provide f quick installation replacement Custom cable length options Product Comparison Eaton s cost-effective, OEM and premium Comet Series all share the same 8 mm flatsided housing. This results in the largest interchangeable sens family available, allowing you to select from well over 50 different models to solve the widest variety of sensing applications. Isolated s F Wiring Flexibility Micro-Connect Models Unless otherwise noted, the products contained in this document are not designed intended f use in human safety applications. F Customer Service in the U.S. call -877-ETN CARE (86-7), in Canada call F Application Assistance in the U.S. and Canada call PG.05E..T.E

2 August 007 Easy and Flexible Wiring s isolated output simplifies wiring because it acts like a mechanical relay contact but with solid-state speed and reliability. Use the most convenient available voltage f the sens while switching a different voltage with the isolated contact. NPN PNP is easily determined by the way you wire the output. Wiring the f Logic With, you can perfm simple and/ logic without the need f the added cost of an external controller. Low leakage (0 µa) and resistance ratings (5 Ω) allow sens outputs to be wired in series parallel. Two common logic examples are shown at right: OR Function Power A B C AND Function Power A B Common A Common B C A B OUTPUT OUTPUT Model Selection Thru-Beam Senss Operating Voltage Sensing Range Optimum Range Field of View Thru-Beam Component Connection Type Catalog Number Light Operate Dark Operate -Wire and -Wire Senss Thru-Beam Fward Viewing 0 V AC 5 0V DC 0 feet 0. to 0 feet 0 inch (0.5m) 0 feet (m) 6-foot Cable 55AA 55AA0 Detect 6-foot Cable 55AL0 55AD0 Thru-Beam Right-Angle Viewing Detect Synchronous design requires source and detect to be wired to one another 0 0V DC 0 feet 0 V AC 5 0V DC 0 feet 0. to 0 feet 0. to 0 feet 0 inch (0.5m) 0 feet (m) 0 inch (0.5m) 0 feet (m) 55AL0 6-foot Cable 55AA7 55AD0 55AA07 Detect 6-foot Cable 55AL0 55AD0 55AL07 6-foot Cable 55RA 55AD07 55RA0 Detect 6-foot Cable 55RL0 55RD0 Detect Synchronous design requires source and detect to be wired to one another 0 0V DC 0 feet 0. to 0 feet 0 inch (0.5m) 0 feet (m) 55RL0 6-foot Cable 55RA7 55RD0 55RA07 Detect 6-foot Cable 55RL0 55RD0 55RL07 55RD07 Violet Orange Sync + Sync - Violet Orange Detect Input Power wiring diagrams on Page 5 f details on wiring power and output. listing of compatible connect cables on Page 5.

3 August 007 Model Selection and Diffuse Reflective Senss -Wire and -Wire Senss Fward Viewing Retreflect (Not Included) Right-Angle Viewing Diffuse Reflective Fward Viewing Diffuse Reflective Right-Angle Viewing Sens F complete system, der Sens and Retreflect ( PG.05E.7.T.E) Retreflect (Not Included) Sens F complete system, der Sens and Retreflect ( PG.05E.7.T.E) Operating Voltage 0 V AC 5 0V DC Type Standard 0 0V DC Standard 0 V AC 5 0V DC Standard 0 0V DC Standard 0 V AC 5 0V DC Sensing Range 5 feet (.5m) 0 feet 5 feet (.5m) 0 feet 5 feet (.5m) 0 feet 5 feet (.5m) 0 feet Optimum Range 0. to feet 0. to 8 feet (0.0.m) 0. to feet 0. to 8 feet (0.0.m) 0. to feet 0. to 8 feet (0.0.m) 0. to feet 0. to 8 feet (0.0.m) 8 inches (00 mm) 0.5 to 5 inches ( 7 mm) 0 0V DC 8 inches (00 mm) 0.5 to 5 inches ( 7 mm) 0 V AC 5 0V DC 8 inches (00 mm) 0.5 to 5 inches ( 7 mm) 0 0V DC 8 inches (00 mm) 0.5 to 5 inches ( 7 mm) Ranges based on a " diameter retreflect. Sens will detect a 90% reflectance white card at this range. Stocked product, typical der quantities guaranteed in stock. listing of compatible connect cables on Page 5. Field of View Connection Type Catalog Number Light Operate feet (.6m) feet (.6m) feet (.6m) feet (.6m) 0.6 inch (5 mm) 5 inches (7 mm) 0.6 inch (5 mm) 5 inches (7 mm) 0.6 inch (5 mm) 5 inches (7 mm) 6 inch (5 mm) 5 inches (7 mm) Dark Operate 6-foot Cable 50AL 50AD 50AL0 50AD0 6-foot Cable 5AL 5AD 5AL0 5AD0 6-foot Cable 50AL7 50AD7 50AL07 50AD07 6-foot Cable 5AL7 5AD7 5AL07 5AD07 6-foot Cable 50RL 50RD 50RL0 50RD0 6-foot Cable 5RL 5RD 5RL0 5RD0 6-foot Cable 50RL7 50RD7 50RL07 50RD07 6-foot Cable 5RL7 5RD7 5RL07 5RD07 6-foot Cable 50AL 50AD 50AL0 50AD0 6-foot Cable 50AL7 50AD7 50AL07 50AD07 6-foot Cable 50RL 50RD 50RL0 50RD0 6-foot Cable 50RL7 50RD7 50RL07 50RD07 Excess Gain Thru-Beam Senss EXCESS GAIN RANGE (m) RANGE (feet) Excess Gain and Diffuse Reflective Senss (-inch diameter retreflect). 5 Typical perfmance. 5 Minimum Perfmance Diffuse Reflective (90% reflective white card). 5 Typical perfmance. 5 Minimum Perfmance EXCESS GAIN 00 0 RANGE (m) RANGE (feet) EXCESS GAIN 00 0 RANGE (mm) RANGE (inches)

4 August 007 Glass Fiber Optic Adapter This simple adapter allows glass fiber optic cables to be used with standard diffuse reflective senss. Model Selection Glass Fiber Optic Adapter Senss Fibers Catalog Number Glass Fiber Optic Adapter with Hex Wrench Fward Viewing, Diffuse Reflective Senss (dered separately, see Page ) Glass Fiber Optic Cables (dered separately, see PG.05E.5.T.E) 65A-650 Patent #5,559,99 Stocked product, typical der quantities guaranteed in stock. Excess Gain When Using Single Fibers f Thru-Beam Sensing (Gain using E5KF8 fibers). 50A RANGE (mm) When Using Duplex Fibers f Diffuse Reflective sensing (Gain using E5KF7 fibers, based on 90% reflective white card). 50A RANGE (mm) EXCESSGAIN 00 0 EXCESSGAIN RANGE (inches) RANGE (inches) Specifications Glass Fiber Optic Adapter Sens Specifications Specifications on Page 7 Material of Construction Adapter: 60 Brass; Gasket: Silicone Vibration (Sens/Adapter) 0g over 0 Hz to khz Shock (Sens/Adapter) 50g f 0 ms / sinewave pulse Enclosure Ratings NEMA The adapter will resist the entrance of moisture in the area between the lenses and the fiber ends when properly assembled. However, moisture entry is possible during direct high pressure sprays. Since the senss are rated NEMA,,,, X, 6, and, this will not result in damage to the senss themselves. Approximate Dimensions Sens with Adapter Installed in Inches (mm) Except Where Noted M 8 x.0 Thread (mm) Gasket Adapter 0.56 (.) Micro Connect (quick-disconnect versions only)* Micro Connect Indicat LED 0..0 (8.) (5.).69 (.9) Cable length* * Quick-disconnect versions: 8 ± (0. ± 50.8) s: 6 feet (m) 0. (8.).5 (8.)**.6 (66.0)** ** Maximum - based on 00A Sens 0.66 (6.8)

5 5 August 007 Model Selection Compatible Connect Cables F a full selection of connect cables, see PG T.E. Stocked product, typical der quantities guaranteed in stock. Wiring Diagrams Voltage Style Standard Cables Micro Style Micro Style AC Straight Female DC Number of Pins -pin -wire -pin -wire Gauge Length Catalog Number Pin Configuration/Wire Cols (Face View Female Shown) PVC Jacket PUR Jacket IRR PUR Jacket AWG 6.0 feet (m) CSASFCY0 CSASFRY0 CSASFIO0 AWG 6.0 feet (m) CSDSACY0 CSDSARY0 CSDSAIO0 -Red/ -Red/ -Red -Green AC/DC Models DC Models All AC/DC Models (except Thru-Beam) All DC Models (except Thru-Beam) AC 0 to V DC 5 to 0 V L L AC/DC Connect Version-Face View Male (Red/) (Red/) (Green) (Red) L L DC 0 to 0 V Connect Version-Face View Male () () DC () () AC/DC Thru-Beam Wiring L AC 0 to V DC 5 to 0 V L AC/DC Orange: Sync ñ Violet: Sync + Detect (Red/) (Red/) Connect Version-Face View Male Detect (Green) (Red/) (Red) Sync ñ Sync + (Red/) L (Green) (Red) L DC Thru-Beam Wiring DC 0 to 0 V DC Orange: Sync Violet: Sync + Detect () Connect Version-Face View Male () () Sync () Sync + Detect () () () () Isolated DC NPN (Sink) DC PNP () AC L (Pin ) (Pin ) Maximum: (Pin ) Maximum: 80 0 (Pin ) Volts Volts (Pin ) (Pin ) L wires are shown as switched output, however black and gray wires are bidirectional. Isolated DC NPN (Sink) DC PNP () AC (Isolated from DC Sens Power) L (Pin ) (Pin ) Maximum: Maximum: 80 (Pin ) 0 (Pin ) Volts Volts (Pin ) (Pin ) L wires are shown as switched output, however black and gray wires are bidirectional. s: The col codes are the actual wire cols emanating from the sens. Connect Versions: The pin numbering and wire cols, shown in ( ), are typical of several manufacturers, however, variations are possible. NOTE: In case of discrepancies, rely on function indicated and pin location rather than pin number wire col. NOTE: Sens operates on DC voltage, but isolated output can switch AC DC loads.

6 August Model Selection Accessies Description Catalog Number Approximate Dimensions in Inches (mm) Retreflects Retreflects and retreflective tape PG.05E.7.T.E Mounting Brackets Flush Mount Bracket A wide variety of mounting brackets f tubular senss Contoured design is ideal f flush mounting of right-angle reflex to mounting surface using /-inch hardware. No alignment adjustment. Sens mounts on # studs. 0 Stainless Steel PG.05.0.T.E 66AS R 0.5 (6) (5.5) Places 0.75 (9.5) 0.68 (7) ø 0.8 (7.) Places 0.6 (6) 0.7 (9).8 (7.5).08 (5) 0.60 (5) 0.0 (7.6) 0- Stud Places.75 () Flush Mount Bracket Same as above except without contour. Ideal f right-angle diffuse and thru-beam senss. 0 Stainless Steel 66AS R 0.5 (6) (5.5) Places 0.75 (9.5) ø 0.8 (7.) Places 0.6 (6).8 (7.5).08 (5) 0.0 (7.6) 0- Stud Places.75 () Adjustable Protective Bracket Heavy-duty bracket protects the sens from damage. Wks with all senss. Ideal f material handling applications with the right-angle reflex sens. Provides locking vertical and hizontal adjustments f independent adjustment in each axis. Sens mounts on # studs. 0 ga. painted steel E58KS (68.6).8 (5.).00 (50.8).0 (0.5).7 (6.7).6 (66.8).6 (.).0 (0.5). (09.5) 0.70 (7.8).00 (76.).00 (0.6) Comet/ Ball Swivel Bracket Allows 60 rotation and 0 vertical tilt. Hole spacing is identical to our 50 and 55 Series senss. Ideal f mounting right-angle senss. Made of Nyl. 68AS (9) ø 0.0 (5) Places 0.7 (9.5).8 (0).6 () 0. (6) Accessies Connect Cables Replacement mounting nuts and other accessies A variety of cables, connect blocks and accessies PG.05.0.T.E PG T.E Stocked product, typical der quantities guaranteed in stock.

7 7 August 007 Specifications AC/DC Models DC Only Models Input Voltage Power Dissipation 0 to V AC, 5 to 0V DC Thru-beam: W maximum; All others:.5w maximum Type Solid-state relay Isolation 00V maximum Voltage Switching Capacity 00V AC peak; 80V DC Current Switching Capacity 80 ma AC load, 0 V DC (derate to 00 80V DC) Off-State Leakage 0 µa maximum On-State Resistance 5 Ω maximum Sht Circuit Protection Protected (current limited) f loads less than V AC DC. IMPORTANT: will reset automatically when sht is removed (there is no visual indication of a sht circuit condition) Response Time ms Light/Dark Operation Specified by catalog number Temperature Range Operating: - to + F (-5 to +55 C); Stage: - to +58 F (-5 to +70 C) Material of Construction Lens: polycarbonate; Cable jacket: PVC; Body: structural polyurethane foam (do not expose to concentrated acids, alcohols ketones) s m length, -conduct cable; micro -pin male connect Connect Versions Micro Connect -pin male AC DC key (by model) Vibration and Shock Vibration: 0g over 0 Hz to khz; Shock: 50g f 0 ms / sine wave pulse LED Indicat Thru-beam source: Lights steady when power is ; All others: Lights steady when output is Thru-Beam Alignment Aid Detect includes a visible LED behind lens that lights steady when beam is complete Enclosure Ratings NEMA,,,, X, 6, and NOTE: Photoelectric senss confm to NEMA tests as indicated above, however, some severe washdown applications can exceed these NEMA test specifications. If questions about a particular application arise, contact Eaton s Cutler-Hammer Sens Applications Department at Approximate Dimensions in Inches (mm) Except Where Noted 0 to 0V DC Thru-beam:.5W maximum; All others: W maximum and Models Right Angle Viewing Models 0.6 (5.).07 (7.) Micro Connect (quick-disconnect versions only)* 0.5 (.) Diameter Thru Holes ( places) Use # Hardware Only LED Gain Adjustment M 8 x.0 Thread (mm) fits into a 0.75 (9) hole 0. (.8) 0.6 (5.) 0.56 (.).69 (.9) Cable length* *Quick-disconnect versions: 8 ± (0. ± 50.8) Cable versions: 6 feet (m) 0. (8.) 0.75 (9.).00 (5.).75 (69.9) 0.5 (6.) 0.7 (.9) 0.5 (.7) 0.5 (.7) Diffuse Reflective and Thru-Beam Models 0.56 (.) Micro Connect (quick-disconnect versions only)* 0.5 (.) Diameter Thru Holes ( places) Use # Hardware Only LED Gain Adjustment M 8 x.0 Thread (mm) fits into a 0.75 (9) hole 0. (.8) C L Right Angle Viewing Models.69 (.9) Cable length* *Quick-disconnect versions: 8 ± (0. ± 50.8) Cable versions: 6 feet (m) 0. (8.) "B".00 (5.) 0.5 (6.) "A" Right angle viewing: A =.6 (66.0); B = 0.65 (6.5) 0.7 (.9) 0. (5.) 0.7 (7.8)