Siemens Power Academy SICAM 1703 the automation unit

Transcription

1 Siemens Power Academy the automation unit Lesson 3 The A-B-C of Terms and Modules Copyright Siemens AG All rights reserved.

2 Content What we have learned in Lesson 3: The A-B-C of Important terms PS, CP, PE, IOM, SM Mr. Expert what is a PRE? Dear Mr. Power P R E means Protocol Element Page 2 Aug-12 Siemens Power Academy Vienna

3 A-B-C What is P-R-E, written on my SICAM TM? Listen Mr. Power! The A-B-C of PRE 0, PRE1, Page 3 Aug-12 Siemens Power Academy Vienna

4 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules is based on several modules. IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor PRE = Protocol Element SM = Sub Modules BSE = Basic System Element Master Control Element and each module has its short name Node Bus Peripheral Element + Page 4 Aug-12 Siemens Power Academy Vienna

5 A-B-C Central Processor SICAM BC CP-6014 TM Central Processing board with product number 6014 SICAM mic SICAM emic SICAM TM SICAM AK Page 5 Aug-12 Siemens Power Academy Vienna

6 A-B-C Module CP Each SICAM product has it s own Central Processing board(s). SICAM mic CP-6040 CP-5014 CP-5002 CP-5003 SICAM emic SICAM BC CP-x0xx Central Processing SICAM TM CP-2014 CP-2017 SICAM AK CP-6010 CP-6014 Page 6 Aug-12 Siemens Power Academy Vienna

7 A-B-C Module CP Basically is a multiprocessor System, so you can use more than one Central Processor (CP); in SICAM BC up to 2 CPs. Main CP additionally CPs in SICAM AK up to 17 CPs. Lets have a closer look inside a SICAM AK CP-2014 CP-2017 Page 7 Aug-12 Siemens Power Academy Vienna

8 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules Power! IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor PRE = Protocol Element SM = Sub Modules BSE = Basic System Element Master Control Element Supply? Node Bus Peripheral Element + Page 8 Aug-12 Siemens Power Academy Vienna

9 A-B-C Module PS To run the System with all these Central Processors basically a PS = Power Supply is necessary. Page 9 Aug-12 Siemens Power Academy Vienna

10 A-B-C Terms & Modules Terms PS = Power Supply Input? CM = Communication Modules IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor PRE = Protocol Element SM = Sub Modules BSE = Basic System Element Output! Master Control Element Node Bus Peripheral Element + Page 10 Aug-12 Siemens Power Academy Vienna

11 A-B-C Module PE PE = Peripheral Elements are used for acquisition of process signals There are 2 different types: One for predefined amount of signals 16 analog inputs +/-20mA Page 11 Aug-12 Siemens Power Academy Vienna

12 A-B-C Module PE One for flexible amount of signals peripheral coupling module (PE-641x) + various IOM = Input Output Modules PS = Power Supply Page 12 Aug-12 Siemens Power Academy Vienna

13 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules Additional IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor SM = Sub Modules Master Control Element PRE = Protocol Element BSE = Basic System Element functions Node Bus Peripheral Element + Page 13 Aug-12 Siemens Power Academy Vienna

14 A-B-C Module SM A SM = Sub Module is always equipped on an other Module. A SM always extends the functions of the basis module. SM-2556 SM-2506 SM-2551 SM-0551 SM-0571 Page 14 Aug-12 Siemens Power Academy Vienna

15 A-B-C Module SM Example: This AI-2300 (analog Input) board can measure 16 analog Values +/- 20mA. Equipped with a Sub Module SM-0571 (PT100 Input) this board can measure 2 temperatures additionally AI-2300 SM-0571 Page 15 Aug-12 Siemens Power Academy Vienna

16 A-B-C Module SM Example: Sub Module on Sub Module CP-2014 Central Processor of SICAM AK SM-2556 (Network Interface) SM-0551 (serial interface) Now your CP board can communicate over Network and serial Interface. Page 16 Aug-12 Siemens Power Academy Vienna

17 A-B-C Hardware & Firmware But Mr. Power, Hardware without Software is just half the battle won. The Software is called Firmware, that leads us to the most important formula! Page 17 Aug-12 Siemens Power Academy Vienna

18 A-B-C System Element A simple Formula in the World of : Hardware + Firmware = System Element = SYEL + CP-xxxx SM-x5xx PE-641x Firmware: CPCx Protocol PRE = PRotocol Element USIO Universal Signal In/Output PE = Peripheral Element BSE = Basic System Element SSE = Supplementary System Element Page 18 Aug-12 Siemens Power Academy Vienna

19 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules BSE IOM = Input Output Modules PE = Peripheral Elements A special of CP = Central Processor it is MCE SM = Sub Modules PRE = Protocol Element BSE = Basic System Element Master Control Element Node Bus Peripheral Element + Page 19 Aug-12 Siemens Power Academy Vienna

20 A-B-C Basic System Element The BSE = Basic System Elements are used to operate Protocol Elements and Peripheral Elements. Lets have a closer look inside a SICAM AK CP-2014 CP-2017 Page 20 Aug-12 Siemens Power Academy Vienna

21 A-B-C Master Control Element Each Product has a special BSE, the Master Control Element! SICAM BC... It s responsible for all central services... and you can easily identify because it s the only one equipped with the Service interface for the Toolbox II. SICAM mic SICAM emic Service Interface SICAM TM SICAM AK Page 21 Aug-12 Siemens Power Academy Vienna

22 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules Important is the bus! IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor PRE = Protocol Element SM = Sub Modules BSE = Basic System Element Master Control Element Is there a time table? Node Bus Peripheral Element + Page 22 Aug-12 Siemens Power Academy Vienna

23 A-B-C Node Bus Communication between Master Control Element and other BSE is possible via the internal Node bus on the Backplane in the base unit. The Master Control Element is mounted on the most left slot. Node bus Internal Interface connected to the backplane External Interface connected to the process Master Control Element CM = Communication Modules Page 23 Aug-12 Siemens Power Academy Vienna

24 A-B-C Terms & Modules Terms Now you know a PRE! A PRE is a Protocol PS = Power Supply Element and as well as Peripheral Elements they CM = Communication Modules are called Supplementary IOM = Input Output Modules System Elements PE = Peripheral Elements CP = Central Processor PRE = Protocol Element SM = Sub Modules BSE = Basic System Element Master Control Element Node Bus Peripheral Element + Page 24 Aug-12 Siemens Power Academy Vienna

25 A-B-C Protocol Element A Protocol Element is directly plugged to the Basic System Element, it s a Sub Module of the BSE and can run up to max. 2 Protocols. PRE BSE Page 25 Aug-12 Siemens Power Academy Vienna

26 A-B-C Protocol Element SICAM BC The same Protocol Elements can be used in SICAM AK, SICAM BC and SICAM TM! SICAM mic SICAM emic Sub Modules for communication SM-2xxx are also called SIM SICAM TM SICAM AK Page 26 Aug-12 Siemens Power Academy Vienna

27 A-B-C Terms & Modules Terms PS = Power Supply CM = Communication Modules Also called PE IOM = Input Output Modules PE = Peripheral Elements CP = Central Processor Protocol Element SM = Sub Modules BSE = Basic System Element Master Control Element yes Node Bus Peripheral Element + Page 27 Aug-12 Siemens Power Academy Vienna

28 A-B-C Peripheral Element Peripheral Elements are connected to the Basic System Element via Ax Peripheral Bus (Ax-P-Bus). Each BSE has an external Ax-P-Bus, which is provided on * the predefined RJ45 connector (SICAM AK & TM), * USB connector (SICAM TM) * optical Port (SICAM BC). external Ax-P-Bus Page 28 Aug-12 Siemens Power Academy Vienna

29 A-B-C Peripheral Element Each BSE can handle up to 16 Peripheral Elements. SICAM AK & BC has also an internal Ax-P-Bus on the Backplane of the rack and by default the Master Control Element is controlling that. internal Ax-P-Bus Page 29 Aug-12 Siemens Power Academy Vienna

30 A-B-C Glossary AI Analog Input (Module) PRE... Protocol Element AO Analog Output (Module) PS... Power Supply Ax-P-Bus Ax Peripheral Bus SM... Sub Module BSE CM CP... CPC... DI... DO... IOM... Basis System Element Communication Module Central Processor Central Processing and Communication Digital Input (Module) Digital Output (Module) In/Output Module SSE... SYEL... USIO... Thanx Supplementary System Element System Element Universal Signal In & Output PE... Peripheral Element Page 30 Aug-12 Siemens Power Academy Vienna