JIEJIE MICROELECTRONICS CO., Ltd

Transcription

1 JIEJIE MICROELECTRONICS CO., Ltd SRV05 4B TVS Diode Array Rev.1.0 FEATURES: Protects four I/O lines Low clamping voltage Low operating voltage Low capacitance RoHS compliant MAIN APPLICATIONS SOT23-6L USB 2.0 & 3.0 power and data line protection Digital video interface (DVI) Notebook computers Video graphics cards Monitors and flat panel displays 10/100/1000 ethernet SIM ports ATM interfaces PROTECTION SOLUTION TO MEET PIN Configuration IEC (ESD) ±30kV (air), ±30kV (contact) IEC (EFT) 40A (5/50ns) IEC (Lightning) 8A (8/20µs) MECHANICAL CHARACTERISTICS JEDEC SOT23-6L package Molding compound flammability rating: UL 94V-0 Quantity per reel: 3, 000pcs Lead finish: lead free Marking code: 05U Circuit Diagram TEL: / 6-

2 ABSOLUTE MAXIMUM RATINGS (TA=25, RH=45%-75%, unless otherwise noted) Parameter Symbol Value Unit Peak pulse power dissipation on 8/20 μs waveform PPP 100 W Peak pulse current on 8/20 μs waveform IPP 8 A ESD per IEC (Air) ESD per IEC (Contact) VESD +/- 30 +/- 30 Lead soldering temperature TL 260 (10 sec.) Operating junction temperature range TJ -55 to +125 Storage temperature range TSTG -55 to +150 kv ELECTRICAL CHARACTERISTICS (TA=25 ) Parameter Symbol Conditions Min Typ Max Unit Reverse working voltage VRWM 5.0 V Reverse breakdown voltage (I/O pin to Ground) VBR IT=1mA V Reverse leakage current IR VRWM = 5V μa Forward voltage VF IT=10mA V Clamping voltage (I/O pin to Ground) Junction capacitance VC IPP =1A, tp =8/20μs V VC IPP =8A, tp =8/20μs V CJ VRWM = 0V, f = 1MHz Any I/O pin to Ground VRWM = 0V, f = 1MHz Between I/O pins pf TEL: / 6-

3 RATINGS AND V I CHARACTERISTICS CURVES (TA=25, unless otherwise noted) FIG.1:V- I curve characteristics (Uni-directional) IF I FIG.2: Pulse waveform (8/20μs) Percent of IPPM Peak value front time: T1 = 1.25 T = 8 (1±20%)μs time to half value: T2 = 20 (1±20%)μs Half value VC VBR VRWM IRVF IT V 50 T2 IPP 10 0 t(μs) T T1 FIG.3: Pulse derating curve PPP derating in percentage(%) FIG.4: ESD clamping (30kV contact) Percent of IPPM ns 40 60ns 20 TA( ) t(ns) 0 0 tr 0.7 to 1ns TEL: / 6-

4 PACKAGE MECHANICAL DATA Symbol Millimeter Inches Min Max Min Max A A A B C D e E E 2.80BSC 0.110BSC L L X Y P P P Land Pattern P TEL: / 6-

5 TAPE AND REEL SPECIFICATION SOT23 6L Symbol Millimeter Typ. Inches Typ. a B C d Φ1.55 Φ0.061 E F P P P W Packaging Description: SOT23-6L parts are shipped in tape. The carrier tape is made from a dissipative(carbon filled) polycarbonate resin. The cover tape is a multilayer film(heat activated adhesive in nature)primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000units per 7'' or 17.8cm diameter reel. The reels are clear in color and made of polystyrene plastic(anti-static coated). D Φ180 Φ7.087 D D G R78.00 R3.071 H R25.60 R1.008 I R6.50 R0.256 W W ORDERING INFORMATION OUTLINE PACKAGE TYPE QUANTITY REEL DESCIPTION TAPING SOT23-6L 3,000 7 inch reel pack TEL: / 6-

6 Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the first version which is made in 12-May This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright 2018 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL: / 6-