If your browser suppresses file extensions of executable file, select "save file" and append ".EXE" extension manually!

Size: px

Start display at page:

Download "If your browser suppresses file extensions of executable file, select "save file" and append ".EXE" extension manually!"

Abel Hancock
5 years ago
Views:

1 DOWNLOAD.ZIP contains: D1IMG05.EXE... Directly creates a bootfloppy 1,44MB/3,5" D1ARCH05.EXE... Selfextracting archive only README.TXT... Contains detailed release information and handling remarks Always click README.TXT first... W H A T ' S N E W Instead of old style (DOS based) FPACK image file, now Windows compatible tool is used. A T T E N T I O N : If your browser suppresses file extensions of executable file, select "save file" and append ".EXE" extension manually!!! If there is a power fail during programming!! or BIOS update failed by other reasons,!! use the CRISIS disk for recovery. =========================================================== B I O S U P D A T E f o r B E E T L E S y s t e m s =========================================================== You will find all this information in file README.TXT placed in selfextracting archiv!!!

2 ============================================================================= P r o c e d u r e t o g e n e r a t e a p r o g r a m m f l o p p y ============================================================================= 1. Put a writable floppy disk into drive A: 2. Format it, using: "format a: /s" 3. Start EXE file xxarchyy <enter> The selfextracting archive copies all necessary files to drive A: Use MS-DOS 6.22 PC / BEETLE as target system to format floppy disk! ===================================================================== P r o c e d u r e t o g e n e r a t e a B E E T L E c a r d ===================================================================== 1. Put writable BEETLE card into drive A: of target system 2. Format it, using: "mcformat.exe" 3. Copy system files to MC: "sys a:" 4. Start EXE file xxarchyy <enter> This selfextracting archive copies all necessary files to BEETLE card (SRAM-MC) in drive A: Use MS-DOS 6.22 PC / BEETLE as target system to format A:! The programm "mcformat.exe" is part of RDI ("C:\RETAIL") or you will find it in selfextracting archiv "xxarchyy.exe". ================================================================================ Quick Procedure t o g e n e r a t e a p r o g r a m m f l o p p y ================================================================================ 1. Put writable floppy disk into drive A: 2. Start EXE file xximgyy <enter> This program creates a bootable floppy disk with all needed files. You can click and "open" the executable INTRANET entry directly under Windows ONLY!!! > Select and change options by SPACE and arrow keys > and start the creation by F1 key!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! This quick procedure does work for floppy disks only!!!! To create a BEETLE card, use the files of selfextracting archive!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

3 ======================================================================= H o w t o u p d a t e B I O S u s i n g F L A S H E P R O M ======================================================================= 1. Put floppy disk into drive a: of target system and start booting the BEETLE. Make sure, you already wrote down all BIOS settings before!!! 2. After boot from floppy Type "1" to confirm to start BIOS flash update now Type "0" to abort flash update process here Procedure will be aborted, if waiting longer than 30 seconds for input. 3a. Newer update disks (e.g. 04/08 for D2) will reboot after unlocking boot block. After automatic reboot, flash update process will be initiated... 3b. With previous releases of update disk (up to 04/08) update process starts directly after confirmation by user...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! D O N O T S W I T C H O F F P O W E R O F S Y S T E M!!!! W H I L E P R O G R A M M I N G F L A S H B I O S!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Wait seconds for long beep to indicate end of programming. Then switch off power supply for some time. Restart BEETLE, verify identification on display and adjust SETUP. Now the new version of BIOS is available =================================================================== R E L E A S E I N F O ( for internal user: see also ECO ) =================================================================== 1.Based on Release No.: 04/07 2.Requirements/Dependences Subpoints: Hardware none Software none 3.Removed Errors/Error-No.: - System hangs when booting from HD Primary Master, if CDROM is available on Secondary IDE Port 4.New Functions/enhanced Functions - none 5.Functions under development/enhanced Functions - none 6.Additional remarks - This BIOS works for BEETLE CPU Pentium (D1-CPU), acting as Standard Version to support standard applications. It will come up with the following signon text:

4 WN STD 05/08 (D1) 05/22/2002 Use D1BIOS05.EXE to create a BIOS-Update-Floppy. Use D1CRIS05.EXE to create a BIOS-Recovery-Floppy. - Checksum: 3DA1h - ECO: /02 - MODULNO1: PROMSETPN: A3C RAWMATPN: LABELTEXT: DA1h - PROGRAMMIERFORMAT: INTEL MCS-86HEX After corrupted checksum the BIOS will set its default to the following values: Main ==== Diskette A: Diskette B: 1.44 MB >Primary Master: >Primary Slave: >Secondary Master: >Secondary Slave: Local Bus IDE adapter: Memory Cache: QuickBoot Mode: Primary Advanced ======== Installed O/S: Other Reset Configuration Data: No Hard Disk Pre-Delay: Large Disk Access Mode: DOS PS/2 Mouse: Default Primary Video Adapter: PCI / Onboard Legacy USB Support: Speaker Volume Middle >PCI Configuration ISA graphics device installed: No >PCI/PNP ISA UMB Region Exclusion D000 - D3FFF: D400 - D7FFF: D800 - DBFFF: DC00 - DFFFF: >PCI/PNP ISA IRQ Region Exclusion IRQ 3: IRQ 4: IRQ 5: IRQ 7: IRQ 9: Reserved IRQ 10: Reserved IRQ 11: IRQ 12: IRQ 15:

5 >I/O Device Configuration Serial Port A: Base I/O address: 3F8 Serial Port B: Base I/O address: 2F8 Parallel Port: Mode: Bi-directional Base I/O address: 378 Floppy Disk Controller: >Audio Options Menu Sound Chip: >DMI Event Logging Clear all DMI event logs: Event logging: ECC Event logging: No Security ======== Processor Serial Number (Only visible with PIII onboard) Power ===== Power Savings: Wakeup On Modem Ring: Wakeup On LAN: Wakeup On Time: Wakeup Time: 00:00:00 Power State >HardWare Monitor CPU Critical Temperature: Stay 90 GrdC Boot ==== Diskette Drive +Hard Drive ATAPI CD-Rom Drive Network Boot

D2 motherboard BIOS update 43/15 Contents of DOWNLOAD.ZIP:

D2 motherboard BIOS update 43/15 Contents of DOWNLOAD.ZIP: Contents of DOWNLOAD.ZIP: D2UPDATE4315IMG.EXE... Directly creates a bootable flash D2UPDATE4315DD.BIN update floppy disk (1,44MB/3,5")... Floppy image file of flash crisis disk for Linux; to be extracted