Contents Touch Screens & Membranes

Transcription

1 Contents Touch Screens & Membranes FT -Wire Touch Screens With FPC Tails... With Printed Tails...0 FT Digital Touch Screens...8 FT 5-Wire Touch Screens...20 TP0 -Wire Multi-Touch Screens...26 FM Membranes /5/8

2 Touch Screens Series FT Resistive Touch Screens -Wire, 5-Wire & Digital Solutions NKK s transparent touch screens are engineered to complement the application of choice while offering superior durability and flexibility. With options in multiple sizes, and choices of input by finger, gloved finger or stylus, we maintain a consistent focus on impeccable quality and value added solutions with the diverse needs of our customers at the forefront. Whether an application requires the - or 5-wire technology, the features include metal tails (analog), contact reliability with a connector, and NR film, eliminating many of the typical visual artifacts. The film surface is non-glare and resin coated for ease of use and integrity of the surface. dditional benefits of NKK s 5-wire touch screens include: Screens highly resistant to static electricity and noise pollution Drift-free operation despite any temperature fluctuation Greater touch point density translating to more precision and reduction of false actuations Quicker response time DISTINCTIVE CHRCTERISTICS Wide Range of vailable Sizes Custom Solutions a Specialty Digital and nalog Solutions Controllers vailable nti-newton Ring (NR) Technology for nalog Touch Screens Design Minimizes Visual rtifacts RoHS Compliant PPICTIONS Information Kiosks Industrial utomation Banking, Exchange Management Systems Office utomation Gaming/Entertainment Medical Equipment Hand-held Devices Hospitality & Restaurant Broadcast 3

3 Series FT -Wire Touch Screens with FPC Tails General Specifications Electrical Capacity (Resistive oad) Other Ratings FT Number of Keys 00 nalog Screen Size Power evel: S TYPIC ORDERING EXMPE Input Method Finger or Stylus *Position of Tail (nalog) No Code V S N W 5V DC (resistive load) XY Resistive Value: 250 ~ 850Ω; Wide: 20 ~,500Ω inearity: ±.5% maximum Insulation Impedance: 0MΩ 25V DC Expected Operational ife: Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping:,000,000 operations minimum (pressing force.9n using silicone rubber, hardness 60 ) Touch ctivation Force:.7N maximum Chattering Time: 0 milliseconds maximum ight Transmission: 80% typical (Touch Panel portion) Surface Hardness: 2H minimum (JIS K5600) Environmental Data Operating Temperature Range: Storage Temperature Range: Relative Humidity: 20 C ~ +70 C ( F ~ +58 F) 0 C ~ +80 C ( 0 F ~ +76 F) +60 C (+0 F), humidity 90%, 20 hours eft or Right (Horizontal) Top or Bottom (Vertical) Narrow Frame Type (Horizontal) Narrow Frame Type 2 (Horizontal) Wide Type (Horizontal) *spect Ratio: Narrow Frame: :3 Wide Frame: 6:9 W Type -Wire Tail DESCRIPTION FOR TYPIC ORDERING EXMPE Touch Screen with 0.6" Screen Finger or Stylus Input FTS00 0.6W FPC Tail.0mm Pitch Wide Type Frame with Horizontal Tail Position -Wire nalog

4 -Wire Touch Screens with FPC Tails Series FT PRT NUMBERS & DESCRIPTIONS Tail Narrow Frame Type Horizontal Tail Vertical Tail Narrow Frame Type 2 Horizontal Tail Wide Type Horizontal Tail FTS00-5.7S- FTS00-6.5S- FTS00-8.S- FTS00-0.S- FTS00-0.V- FTS00-0.6W- FTS00-2.N- FTS00-2.W- FTS00-5N- FTS00-5.6W- FTS00-9N- Part Number Screen Size in Inches FTS00-5.7S- 5.7 FTS00-6.5S- 6.5 FTS00-8.S- 8. FTS00-0.S- 0. FTS00-0.V- 0. FTS00-2.N- 2. FTS00-5N- 5.0 FTS00-9N- 9.0 FTS00-0.6W- 0.6 FTS00-2.W- 2. FTS00-5.6W- 5.6 Key Dimensions.535 x 3.02 (5.2mm x 86.mm) 5.97 x (32.0mm x 99.0mm) x 5.02 (70.9mm x 29.6mm) 8.35 x (2.2mm x 58.mm) 8.35 x (22.2mm x 59.mm) x (25.8mm x 8.3mm).972 x (30.mm x 228.mm).85 x.850 (376.3mm x 30.0mm) 9.07 x 5. (230.mm x 38.2mm) x 6.25 (26.2mm x 63.2mm) 3.55 x 7.68 (3.2mm x 93.5mm) -Wire nalog Touch Screens Viewing Dimensions.76 x (2.0mm x 9.6mm) 5.33 x.3 (38.0mm x 05.0mm) 6.99 x 5.33 (76.5mm x 35.mm) 8.65 x 6.39 (25.0mm x 62.mm) x 6.33 (26.mm x 63.mm) x 7.06 (29.6mm x 88.mm) 2.30 x 9.38 (308.mm x 232.mm) x 2.02 (382.0mm x 307.mm) 9.89 x (233.mm x.3mm) 0.0 x 6.55 (26.26mm x 66.mm) 3.68 x 7.78 (37.5mm x 96.8mm) External Dimensions 5.57 x (3.0mm x 0.0mm) x.567 (50.0mm x 6.0mm) 7.33 x (86.5mm x.mm) x 6.78 (225.6mm x 7.mm) 8.97 x (226.5mm x 83.0mm) x (260.0mm x 98.0mm) x (32.8mm x 25.5mm) 5.57 x (395.5mm x 32.0mm) x 6.09 (27.8mm x 5.8mm) x (275.0mm x 76.0mm).276 x 8.33 (362.6mm x 2.2mm) Panel Thickness.055 (.mm).055 (.mm) (2.mm) (2.mm) (2.mm) (2.mm) (2.mm) (2.mm) (2.mm) (2.mm) (2.mm) Terminal Detail Pin.039 (.0mm) Pitch ength (65.0mm) ength (65.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) 5

5 Series FT TYPIC DIMENSIONS Vertical Tail XE YO Part Number, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Screen Size in Inches FTS00-0.V- 0. Horizontal Tail & Wide Frame XE YO, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Part Number Tail Detail Screen Size in Inches FTS00-0.6W- 0.6 FTS002.W- 2. FTS005.6W- 5.6 x 3 (3.0).8 Pins TYPIC DIMENSIONS Tail Detail Dim Signal Y UP 2 Y O 3 X E X RI 8.97 (226.5±0.3mm) Pins.97 ±.0 (0.7) Typ.028 (0.7) Typ ±.0 x 3 (3.0).8 Signal Y UP 2 Y O 3 X E X RI Dim (0.5) (0.5) (27.8±0.3mm) (275.0±0.3mm).276" (362.6±0.3mm) Typical Dimensions for Vertical Frame Dim B (26.mm).59 XE Dim C ctive 8.35 (22.2mm) Dim D ctive (59.mm) -Wire Touch Screens with FPC Tails Pin No. See Tail Detail (.5) ir Vent.059 ctive G.97 ±.0 (0.0) ±.0.39 See Tail Detail (0.3) ± (80.0) 3.50 ±.0 (65.0) Pin No..59 Contact (Gold Plating) Reinforcement YO Tail (0.0) ± ±.0 (65.0) (80.0) ± ctive C B Dim E 6.33 (63.mm) XE G ctive Typical Dimensions for Wide Horizontal Frames Dim B 9.89 (233.mm) 0.0" (26.26mm) 3.68" (37.5mm) Dim C ctive 9.07 (230.mm) 0.280" (26.2mm) 3.55" (3.2mm) Dim D ctive 5. (38.2mm) 6.25" (63.2mm) 7.68" (93.5mm) Dim E (.3mm) 6.55" (66.mm) 7.78" (96.8mm) Dim F H D (83.0±0.3mm) YO Dim F E F (0.3) ± Reinforcement Tail Reinforcement Film Bottom Electrode (2.) ± Dim G ctive (Horizontal).508 (.5mm) ctive C Top Electrode (5.8±0.3mm) 6.929" (76.0±0.3mm) 8.33" (2.2±0.3mm) B Bottom Electrode Dim G ctive (Horizontal).933 (25.3mm) 5.68" (38.89mm) 7.38" (8.3mm) Contact Side (Gold Plating) Top Electrode Dim H Center of ctive (Vertical) (9.5mm) (.5) ir Vent.059 H D E F (2.) ± Dim H Center of ctive (Vertical) 2.98 (75.8mm) 3.65 (88.0mm).27 (07.mm) 6

6 -Wire Touch Screens with FPC Tails Series FT TYPIC DIMENSIONS Horizontal Tail & Narrow Frame Tail Detail Part Number (0.7) Typ ±.0 x 3 (3.0).8 Screen Size in Inches * FTS00-5.7S- 5.7 * FTS00-6.5S- 6.5 FTS00-8.S- 8. FTS00-0.S- 0. FTS00-2.N- 2. FTS00-5N- 5.0 FTS00-9N- 9.0 (0.5) Dim XE 5.57 (3.0±0.3mm) (50.0±0.3mm) 7.33 (86.5±0.3mm) (225.6±0.3mm) (260.0±0.3mm) (32.8±0.3mm) 5.57 (395.5±0.3mm).97 ±.0 (0.0) ±.0.39 See Tail Detail (0.3) ± YO Typical Dimensions for Narrow Frames Dim B, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal.76 (2.0mm) 5.33 (38.0mm) 6.99 (76.5mm) 8.65 (25.0mm) (29.6mm) 2.30 (308.mm) (382.0mm) * (65.0) (65.0) (80.0) ± Pin No..59 Contact (Gold Plating) Reinforcement Dim C ctive.535 (5.2mm) 5.97 (32.0mm) (70.9mm) 8.35 (2.2mm) (25.8mm).972 (30.mm).85 (376.3mm) Tail XE G ctive Dim D ctive 3.02 (86.mm) (99.0mm) 5.02 (29.6mm) (58.mm) (8.3mm) (228.mm).850 (30.0mm) Pins Dim E YO (9.6mm).3 (05.0mm) 5.33 (35.mm) 6.39 (62.mm) 7.06 (88.mm) 9.38 (232.mm) 2.02 (307.mm) Top Electrode Signal Y UP 2 Y O 3 X E X RI ctive C B Bottom Electrode Dim F (0.0±0.3mm).567 (6.0±0.3mm) (.±0.3mm) 6.78 (7.±0.3mm) (98.0±0.3mm) (25.5±0.3mm) (32.0±0.3mm) (.5) ir Vent.059 H D E (2.) ± Dim G ctive (Horizontal) 2.68 (67.25mm) 3.03 (77.0mm) 3.73 (9.85mm).92 (.mm) 5.77 (3.5mm) (62.5mm) (98.mm) F Dim H ctive (Vertical).988 (50.5mm) 2.28 (58.0mm) 2.83 (72.2mm) 3.37 (85.7mm) (97.8mm).833 (22.75mm) 6.39 (60.5mm) 7

7 Series FT -Wire Touch Screens with FPC Tails FTCS0C (37.0).57 (30.0).8 Direction of Tail Insertion Contact Surface FTCU0C (37.0).57 (30.0).8 Direction of Tail Insertion Contact Surface CN CN Pin No. Pin No. (65.0) (57.0) ot No. 2.2 (7.0).669 CN ot No. CN IC FTC S (65.0) (57.0) 2.2 IC FTC U Controller Board for RS232C Pin No. DISTINCTIVE CHRCTERISTICS 0C 0C 2 Part No. Part No. Pin No. Pin No. Compatible with Control Board USB/RS232C Equipped with EPROM for Saving Setting Data Device Drivers are Windows 7, 8 & 0 Compatible PC Install Device Driver USB Cable System Configuration for USB USB Header USB Controller Board IC Chip for nalog Touch Screen 3 5 CN3 (5.5).27 CN2 (3.3) Dia Typ.30 (5.6).220 (.3).05 (.6).063 Controller Board for USB (.5).77 CN (3.3) Dia Typ.30 (.6).063 (3.95).56 Controller Boards & Drivers nalog Touch Screen Monitor PC Type vailable through NKK Switches CN -Wire nalog Touch Screen - Pins Pin No. Symbol Description Y0 2 Y 3 X0 X For or YO For or XE CN2 RS232C Header - 3 Pins CN3 Header for Power Supply - 2 Pins Pin No. Symbol Description V CC Supply Voltage 2 GND GND CN -Wire nalog Touch Screen - Pins Pin No. Symbol Description Y0 2 Y 3 X0 X Controller Board Side Pin Computer Symbol Description No. Side RD Receiving Data (IN) Sending Data 2 SD Sending Data (OUT) Receiving Data 3 GND GND GND For or YO For or XE CN Header for USB - 5 Pins Pin No. Symbol Description V CC USB V CC 2 D USB D 3 D + USB D + GND USB GND 5 GND Shield GND Controller Boards Part No. Communication Protocol -Wire FTCS0C RS232C -Wire FTCU0C USB Install Device Driver System Configuration for RS232C T73 Receptacle RS232C Header Header for 5V RS232C Controller Board 5V DC Power Supply IC Chip for nalog Touch Screen T7 Receptacle Connects to Power Source nalog Touch Screen Monitor 8

8 -Wire Touch Screens with FPC Tails Series FT OPTION CCESSORIES Receptacle & Wire ssembly for RS232C T73 is the Receptacle with code to connect to RS232C communication of the controller boards. It is compatible with FTCS0C. The cable length is adjustable. Pin No (500.0) General Specifications Items FTCS0C FTCU0C Interface RS232C USB 2.0 Full Speed Clock 6MHz 6MHz Supply Voltage 5.0V 5.0V (Bus Power) Resolution 0bit 0bit Current Consumption 0m maximum 00m maximum Communication Speed 9600 bps Communication Format bsolute Maximum Ratings Supply Voltage Input Voltage Data ength: 8bit Parity: None Stop Bit: Items Symbols Minimum Maximum Notes Operating Temperature Storage Temperature V CC 0.3V +5.5V V TP V CC Touch Panel Input *V RS 5V +5V RS232C T OPR T STG 20 C F 25 C 3 F *V RS : pplies Only to RS232C +70 C +58 F +85 C +85 F DISTINCTIVE CHRCTERISTICS Interface: USB and RS232C High Speed and ccuracy Built-in Calibration Function Data Function Removal Built In to Eliminate Noise IC FTCSU58 The IC is for use with the -wire transparent touch screens. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the /D. The /D converter receives the value and sends a set of coordinate values as serial data or USB. Wire Color Black Yellow Blue Receptacle & Wire ssembly for Power Supply T7 is a Receptacle with code to connect to FTCS0C power source of the control boards. The cable length is adjustable. Pin No. 2 Recommended Values Items Symbols Minimum Typical Maximum Notes Supply Voltage Operating Temperature IC Chip & ccessories Package Interface Supply Voltage V CC +.75V V T OPR * Rated Output Current Operation Frequency 20 C F Touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. The controller board is designed specifically for touch screens with the FPC tails. Refer to the product data sheet for detailed specifications, available by contacting NKK Switches (500.0) C +58 F General Specifications for IC FTCSU58 /D Converter Resolution Operating Temperature Storage Temperature FQFP 8 Pins Serial Interface (synchronous) or USB (Full Speed 2.0) No Condensation 3.3/5.0V Typ; USB vailable for 5V Only High evel: 70m ow evel: +70m 6MHz 0bit 20 C ~ +85 C ( F ~ +85 F) 0 C ~ +25 C ( 0 F ~ +257 F) * Total Output Electric Current mount of all the I/O Port Contact NKK Switches for the IC data sheet. Wire Color Black Red 9

9 Series FT -Wire Touch Screens with Printed Tails General Specifications Electrical Capacity (Resistive oad) Other Ratings Power evel: 5V DC (resistive load) XY Resistive Value: 250 ~ 850Ω; Wide: 20 ~,500Ω inearity: ±.5% maximum Insulation Impedance: 0MΩ 25V DC Expected Operational ife: Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping:,000,000 operations minimum (pressing force.9n using silicone rubber, hardness 60 ) Touch ctivation Force:.7N maximum Chattering Time: 0 milliseconds maximum ight Transmission: 80% typical (Touch Panel portion) Surface Hardness: 2H minimum (JIS K5600) Environmental Data Operating Temperature Range: Storage Temperature Range: Relative Humidity: FT Number of Keys 00 nalog Screen Size S 20 C ~ +70 C ( F ~ +58 F) 0 C ~ +80 C ( 0 F ~ +76 F) +60 C (+0 F), humidity 90%, 20 hours Input Method TYPIC ORDERING EXMPE Finger or Stylus *Position of Tail (nalog) No Code V S N W eft or Right (Horizontal) Top or Bottom (Vertical) Narrow Frame Type (Horizontal) Narrow Frame Type 2 (Horizontal) Wide Type (Horizontal) *spect Ratio: Narrow Frame: :3 Wide Frame: 6:9 DESCRIPTION FOR TYPIC ORDERING EXMPE Narrow Frame Type 2 Horizontal Tail Position Touch Screen with 2." Screen Finger or Stylus Input FTS00 2.N N Type -Wire -Wire nalog 0

10 -Wire Touch Screens with Printed Tails Series FT PRT NUMBERS & DESCRIPTIONS Tail Narrow Frame Type Horizontal Tail Vertical Tail Narrow Frame Type 2 Horizontal Tail Wide Type Horizontal Tail FTS00-5.7S- FTS00-6.5S- FTS00-8.S- FTS00-0.S- FTS00-0.V- FTS00-0.6W- FTS00-2.N- FTS00-2.W- FTS00-5N- FTS00-5.6W- FTS00-9N- Part Number Screen Size in Inches FTS00-5.7S- 5.7 FTS00-6.5S- 6.5 FTS00-8.S- 8. FTS00-0.S- 0. FTS00-0.V- 0. FTS00-2.N- 2. FTS00-5N- 5.0 FTS00-9N- 9.0 FTS00-0.6W- 0.6 FTS00-2.W- 2. FTS00-5.6W- 5.6 Key Dimensions.5 x 3.0 (5.2mm x 86.mm) 5.20 x 3.90 (32.0mm x 99.0mm) 6.73 x 5.0 (70.9mm x 29.6mm) 8.32 x 6.2 (2.2mm x 58.mm) 8.35 x 6.28 (22.2mm x 59.mm) x (25.8mm x 8.3mm).972 x (30.mm x 228.mm).85 x.850 (376.3mm x 30.0mm) 9.07 x 5. (230.mm x 38.2mm) x 6.25 (26.2mm x 63.2mm) 3.55 x 7.68 (3.2mm x 93.5mm) Note: For other sizes or frame types, contact the factory. -Wire nalog Touch Screens Viewing Dimensions.76 x 3.6 (2.0mm x 9.6mm) 5.3 x.3 (38.0mm x 05.0mm) 6.95 x 5.33 (76.5mm x 35.mm) 8.7 x 6.39 (25.0mm x 62.mm) 8.52 x 6.3 (26.mm x 63.mm) x 7.06 (29.6mm x 88.mm) 2.30 x 9.38 (308.mm x 232.mm) x 2.02 (382.0mm x 307.mm) 9.89 x (233.mm x.3mm) 0.0 x 6.55 (26.26mm x 66.mm) 3.68 x 7.78 (37.5mm x 96.8mm) External Dimensions 5.6 x 3.98 (3.0mm x 0.0mm) 5.9 x.57 (50.0mm x 6.0mm) 7.3 x 5.69 (86.5mm x.mm) 8.88 x 6.75 (225.6mm x 7.mm) 8.92 x 7.20 (226.5mm x 83.0mm) x (260.0mm x 98.0mm) x (32.8mm x 25.5mm) x (395.5mm x 32.0mm) x 6.09 (27.8mm x 5.8mm) x (275.0mm x 76.0mm).276 x 8.33 (362.6mm x 2.2mm) Panel Thickness.055 (.mm) (2.mm) * Terminal Detail 8 Pin.09 (.25mm) Pitch ength (65.0mm) ength (65.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) * pin available with.0mm or.25mm pitch. Contact factory for details.

11 Series FT -Wire Touch Screens with Printed Tails TYPIC DIMENSIONS Horizontal Tail & Narrow Frame Type 2 Part Number Tail Dimensions for FTS00-5.7S- FTS00-6.5S- Screen Size in Inches FTS00-5.7S- 5.7 FTS00-6.5S- 6.5 FTS00-8.S- 8. FTS00-0.S- 0. (.25) Typ (.25) ±0..3 (0.8) Typ.03 (0.3) ± Dim 5.6 (3.0±0.3mm) 5.9 (50.0±0.3mm) 7.3 (86.5±0.3mm) 8.88 (225.6±0.3mm) (0.0).39 (0.5) (80.0) ± (70.0) 2.76 (60.0) 2.36 Pin Pin 8 (28.2). 6 x 2 (0.0).39 XE (55.0) 2.7 (5.0).77 Pin Pin 8 (65.0) ± YO XE, : Top Electrode Terminal, YO: Bottom Electrode Terminal XE B ctive Contact Side Insulation Film Top Electrode -Wire nalog Touch Screen Dimensions G C ctive Y O Pins ctive Stiffener Tail Bottom Electrode J Dim B.76 (2.0mm) 5.3 (38.0mm) 6.95 (76.5mm) 8.6 (25.0mm) Dim C ctive.5 (5.2mm) 5.20 (32.0mm) 6.73 (70.9mm) 8.3 (2.2mm) Dim D ctive 3.0 (86.mm) 3.90 (99.0mm) 5.0 (29.6mm) 6.2 (58.mm) Dim E 3.6 (9.6mm).3 (05.0mm) 5.33 (35.mm) 6.39 (62.mm) Signal, 2 Y UP 3, Y O 5, 6 X E 7, 8 X RI Dim F 3.98 (0.0±0.3mm).57 (6.0±0.3mm) 5.69 (.±0.3mm) 6.75 (7.±0.3mm) Dim G ctive (Horizontal) 2.65 (67.25mm) 3.03 (77.0mm) 3.73 (9.85mm).9 (.mm) (.5) ir Vent.059 H D E F Dim H ctive (Vertical).99 (50.5mm) 2.28 (58.0mm) 2.8 (72.2mm) 3.37 (85.7mm) Dim J.055 (.mm).055 (.mm) (2.mm) (2.mm) 2

12 -Wire Touch Screens with Printed Tails Series FT TYPIC DIMENSIONS Vertical Tail (.5).059 ir Vent Part Number XE Screen Size in Inches FTS00-0.V- 0. G ctive 6 x 2 C XE, : Top Electrode Terminal, YO: Bottom Electrode Terminal Dim 8.92 (226.5±0.3mm) (.25) ±0..3 (0.8) Typ.03 (28.2).0 XE (0.5) Pin 8 B YO 8 YO -Wire nalog Touch Screen Dimensions Dim B 8.52 (26.mm) (.25) Typ (0.0).39 Pin ctive Dim C ctive 8.35 (22.2mm) (60.0) 2.36 (70.0) 2.76 (80.0) ± Dim D ctive 6.28 (59.mm) Pins Dim E 6.3 (63.mm) H D Signal, 2 Y UP 3, Y O 5, 6 X RI 7, 8 X E Dim F E 7.20 (83.0±0.3mm) F (0.3) ± Stiffener Dim G ctive (Horizontal).5 (.5mm) Tail Reinforcement Film Bottom Electrode (2.) ± Contact Side Insulation Film Top Electrode Dim H ctive (Vertical) 3.72 (9.5mm) 3

13 Series FT -Wire Touch Screens with Printed Tails TYPIC DIMENSIONS Horizontal Tail & Narrow Frame Type 2 (.25) Typ.09 (.25) ±0..3 (0.8) Typ.03 (0.3) ± Part Number Screen Size in Inches FTS00-2.N- 2. FTS00-5N- 5.0 FTS00-9N (70.0) ±.0 (0.0) ±.0.39 Pin Pin 8 Contact Side Top Electrode Reinforcement Tail Bottom Electrode (2.) ± (80.0) 3.50 ±0. (60.0) (28.2).0 XE Dim (260.0±0.3mm) (32.8.±0.3mm) 5.57 (395.5.±0.3mm) YO XE Dim B, YO: Top Electrode Terminal XE, : Bottom Electrode Terminal (29.6mm) 2.30 (308.mm) (382.0mm) G ctive Typical Dimensions Dim C ctive (25.8mm).972 (30.mm).85 (376.3mm) B Dim D ctive (8.3mm) (228.mm).850 (30.0mm) YO C ctive ctive Pins Dim E 7.06 (88.mm) 9.38 (232.mm) 2.02 (307.mm) Dim F Signal, 2 Y UP 3, Y O 5, 6 X E 7, 8 X RI (98.0±0.3mm) (25.5±0.3mm) (32.0±0.3mm) Dim G ctive (Horizontal) 5.77 (3.5mm) (62.5mm) (98.mm) (.5) ir Vent.059 H D E F Dim H ctive (Vertical) (97.8mm).833 (22.75mm) 6.39 (60.5mm)

14 -Wire Touch Screens with Printed Tails Series FT TYPIC DIMENSIONS Horizontal Tail & Wide Frame (.25) Typ.09 (.25) ±0..3 (0.8) Typ.03 Part Number 8 (70.0) ±.0 (0.0) ±.0.39 Pin Pin 8 Screen Size in Inches FTS00-0.6W- 0.6 FTS00-2.W- 2. FTS00-5.6W- 5.6 (80.0) ± (60.0) (28.2).0 Contact Side 8 Tail XE Dim (27.8±0.3mm) (275.0±0.3mm).276 (362.6±0.3mm) YO XE, YO: Top Electrode Terminal XE, : Bottom Electrode Terminal Dim B 9.89 (233.mm) 0.0 (26.26mm) 3.68 (37.5mm) B G ctive Top Electrode Typical Dimensions Dim C ctive 9.07 (230.mm) Dim D ctive YO 5. (38.2mm) C ctive ctive (0.3) ±0.05 (2.).02 Reinforcement Bottom Electrode.083 ± (26.2mm) 3.55 (3.2mm) 6.25 (63.2mm) 7.68 (93.5mm) Pins Dim E (.3mm) 6.55 (66.mm) 7.78 (96.8mm) Dim F Signal, 2 Y UP 3, Y O 5, 6 X E 7, 8 X RI 6.09 (5.8±0.3mm) (76.0±0.3mm) 8.33 (2.2±0.3mm) (.5) ir Vent.059 H Dim G ctive (Horizontal).933 (25.3mm) 5.68 (38.89mm) 7.38 (8.3mm) D E F Dim H ctive (Vertical) 2.98 (75.8mm) 3.65 (88.0mm).27 (07.mm) 5

15 Series FT -Wire Touch Screens with Printed Tails FTCS0B for RS232C PC Install Device Driver (37.0).57 (5.75).620 (30.0).8 USB Cable (7.5).295 (3.65) Typ. (.25) Typ.09 (0.5) Typ (0.5) Direction of Tail Insertion Contact Surface (.6).063 (3.5).38 DISTINCTIVE CHRCTERISTICS Compatible with Control Board USB/RS232C Equipped with EPROM for Saving Setting Data Device Drivers are Windows 7 and 8 Compatible USB Header.97 CN 8 System Configuration for USB USB Controller Board IC Chip FTCSU58 nalog Touch Screen Monitor General Specifications Controller Board for RS232C (65.0) (57.0) 2.2 (7.0).669 (8.5).335 Pin No. Slider (5.).23 (0.35) Typ.0 (0.65).026 ot No. Part No. 2 Pin No. CN3 S FTCS0B Items FTCS0B FTCU0B Interface RS232C USB 2.0 Full Speed Clock 6MHz 6MHz Supply Voltage 5.0V 5.0V Resolution 0bit 0bit Current Consumption 0m maximum 00m maximum Communication Speed 9600 bps Communication Format Data ength: 8bit Parity: None Stop Bit: (5.6).220 Pin No. CN2 3 (3.3) Dia Typ.30 (5.5).27 (8.0).35 (9.0) Typ*.35 * Pattern on Both Sides is Prohibited (0.5) (7.0).276 (.3).05 Controller Boards & Drivers PC Type Install Device Driver vailable through NKK Switches (0.5) (.0).57 T73 Receptacle RS232C Header Header for 5V CN -Wire nalog Touch Screen - 8 Pins Pin No. Symbol Description, 2 Y0 3, Y 5, 6 X0 7, 8 X Controller Boards RS232C Controller Board 5V DC Power Supply Part No. IC Chip FTCSU58 T7 Receptacle Connects to Power Source Communication Protocol -Wire FTCS0B RS232C -Wire FTCU0B USB System Configuration for RS232C For or YO For or XE CN2 RS232C Header - 3 Pins Pin No. Symbol Controller Board Side Description nalog Touch Screen Monitor Computer Side RD Receiving Data (IN) Sending Data 2 SD Sending Data (OUT) Receiving Data 3 GND GND GND CN3 Header for Power Supply - 2 Pins Pin No. Symbol Description V CC Supply Voltage 2 GND GND Touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. For specifications or technical data for the controller boards and drivers, see NKK's web site or call our engineering support personnel. 6

16 -Wire Touch Screens with Printed Tails Series FT bsolute Maximum Ratings Items Symbols Minimum Maximum Notes Recommended Values Items Symbols Minimum Typical Maximum Notes Supply Voltage Input Voltage Operating Temperature Storage Temperature V CC 0.3V +5.5V V TP V CC Touch Panel Input *V RS 5V +5V RS232C T OPR 0 C +32 F T STG 25 C 3 F *V RS : pplies Only to RS232C +70 C +58 F +85 C +85 F DISTINCTIVE CHRCTERISTICS High Quality and Reliability Easy Integration Replacing Mouse Functionality Compatible with Control Board USB/RS232C Device Driver Compatible with Vista and Windows XP Operating Systems NKK offers controller boards compatible with USB or with RS232C. See web site or contact factory for specifications and technical data for any of the controller boards and drivers. DISTINCTIVE CHRCTERISTICS Interface: USB and RS232C High Speed and ccuracy Built-in Calibration Function Data Function Removal Built In to Eliminate Noise IC FTCSU58 The IC is for use with the 5- and -wire transparent touch screens, and is available for those who prefer to design their own controller boards. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the /D. The /D converter receives the value and sends a set of coordinate values as serial data or USB. OPTION CCESSORIES T73 Receptacle This Receptacle with code connects to RS232C communication of the controller boards. Supply Voltage Operating Temperature Controller Boards vailable for RS232C Controller Boards vailable for USB IC Chip & ccessories Package Interface Supply Voltage * Rated Output Current Operation Frequency /D Converter Resolution Operating Temperature Storage Temperature T7 Receptacle V CC +.75V V T OPR C +58 F General Specifications for IC FTCSU58 FQFP 8 Pins Serial Interface (synchronous) or USB (Full Speed 2.0) T7 is a Receptacle with code to connect to power source of the control boards. No Condensation 3.3/5.0V Typ; USB vailable for 5V Only High evel: 70m ow evel: +70m 6MHz 0bit 20 C ~ +85 C ( F ~ +85 F) 0 C ~ +25 C ( 0 F ~ +257 F) * Total Output Electric Current mount of all the I/O Port For more details and dimensioned drawings of the accessories, go to NKK s web site or call our engineering support personnel. 7

17 Series FT Digital Touch Screen General Specifications Electrical Capacity (Resistive oad) Other Ratings Power evel: Insulation Impedance: 5V DC 0MΩ 25V DC Expected Operational ife: Tapping:,000,000 operations minimum (using silicone rubber, hardness 60 ) Touch ctivation Force: Chattering Time: ight Transmission: Environmental Data.7N maximum 0 milliseconds maximum 78% standard (Touch Panel portion) Surface Hardness: 3H minimum (JIS K500) Operating Temperature Range: Storage Temperature Range: Relative Humidity: FT Number of Keys 225 Digital 20 C ~ +70 C ( F ~ +58 F) 0 C ~ +80 C ( 0 F ~ +76 F) +60 C (+0 F), humidity 90%, 20 hours S TYPIC ORDERING EXMPE Screen Size DESCRIPTION FOR TYPIC ORDERING EXMPE NR Film Non-glare Surface Printed Tail FTS N Input Method Finger or Stylus Touch Screen with 5.7" Screen Custom Sizes vailable N N Type Digital 8

18 Digital Touch Screen Series FT TYPIC DIMENSIONS (0.36) Typ.0 Y5 Y (3.0).52 (2.0) ± (5.9).23 (6.0) ± (3.0) ±.0.8 (22.0).80 (5.2) ctive.5 (7.56) Typ x (7.0) 2.9 (0.6) Typ.02 (3.0) ±0..22 (38.75).53 (.0) Typ x PRT NUMBER & DESCRIPTION Part Number Screen Size in Inches FTS N 5.7 Key Dimensions (5.9).23.5 x 3.39 (5.2mm x 86.0mm) (0.36) Typ.0 (5.) Typ.23 (86.0) 3.39 ctive ir Vent (92.0) (6.0).630 (0.0).57 (3.0) ±0.3.5 (00.0) ± Digital Touch Screen Dimensions Viewing Dimensions.80 x 3.62 (22.0mm x 92.0mm) Y Y6 Y X X6 X0 X5 Y5 Y ~ Y, X ~ X5, Y5 ~ Y2 Pin ssignment External Dimensions 5.5 x.5 (0.0mm x 3.0mm) Note: Number of keys for Digital Touch Screen: 5 x 5. Y2 Panel Thickness (2.mm) Bottom Electrode Reinforcement Film Tail Stiffener (2.) ± Top Electrode (8.0).709 Reinforcement Film Insulation Film Contact Side (0.3) ± Terminal Detail 30 Pin.039 (.0mm) Pitch ength 3.9 (00.0mm) 9

19 Series FT General Specifications 5-Wire Touch Screens Electrical Capacity (Resistive oad) Power evel: 5.5V DC (resistive load) Other Ratings XY Resistive Value: 20 ~ 80Ω inearity: ±2.0% maximum Insulation Impedance: 0MΩ 25V DC Expected Operational ife: Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping: 0,000,000 operations minimum (pressing force.9n using silicone rubber, hardness 60 ) Touch ctivation Force: 0.05 ~ 0.8N Chattering Time: 0 milliseconds maximum ight Transmission: 80% standard (Touch Panel portion) Surface Hardness: 2H minimum (JIS K5600) Environmental Data Operating Temperature Range: 20 C ~ +70 C ( F ~ +58 F) Storage Temperature Range: 0 C ~ +80 C ( 0 F ~ +76 F) Relative Humidity: +60 C (+0 F), humidity 90%, 20 hours FT Number of Keys 00 nalog S Wide Type??? Description (Horizontal Tail Position)??? PRT NUMBERS & DESCRIPTIONS Part Number TYPIC ORDERING EXMPE Screen Size Input Method Finger or Stylus Type 5 5-Wire DESCRIPTION FOR TYPIC ORDERING EXMPE 5-Wire nalog FTS FTS FTS FTS Screen Size in Inches FTS FTS FTS Key Dimensions 8.5 x 6.5 (25.9mm x 63.9mm) 9.8 x 7.37 (29.0mm x 87.2mm) 2.05 x 9.06 (306.mm x 230.mm) 5-Wire nalog Touch Screens Viewing Dimensions 8.66 x 6.6 (29.9mm x 67.9mm) 9.9 x 7.50 (252.mm x 90.6mm) 2.9 x 9.9 (309.5mm x 233.5mm) External Dimensions 9.3 x 7.22 (236.5mm x 83.3mm) 0.52 x 8. (267.mm x 205.8mm) 2.79 x 9.79 (32.8mm x 28.7mm) Note: See web site for dimensioned drawings for all 5-Wire nalog Touch Screens. Panel Thickness (2.mm) (2.mm) (2.mm) 5 Touch Screen with 0." Screen Finger or Stylus Input Terminal Detail 8 Pin.09 (.25mm) Pitch ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) 20

20 5-Wire Touch Screens Series FT TYPIC DIMENSIONS Horizontal Tail (.25) Typ (.25).3 (0.8)Typ.03 (0.3).02 (0.0).39 Part Number (0.5) Pin Pin 8 Contact Side Tin Plating Screen Size in Inches FTS FTS FTS (80.0) 3.5 (70.0) 2.76 (60.0) 2.36 (28.2). 8 Tail Dim FTS00-XXX5 9.3 (236.5±0.3mm) 0.52 (267.±0.3mm) 2.79 (32.8±0.3mm) U 5-Wire nalog Touch Screen Dimensions Dim B 8.66 (29.9mm) 9.9 (252.mm) 2.9 (309.5mm) UR R U,, UR, R: Bottom Electrode Terminal SENSE: Top Electrode Terminal Dim C ctive 8.50 (25.9mm) 9.80 (29.0mm) 2.05 (306.mm) G ctive Dim D ctive 6.5 (63.9m) 7.37 (87.2mm) 9.06 (230.mm) B C ctive Pins Dim E 6.6 (67.9mm) 7.50 (90.6mm) 9.9 (233.5mm) ctive Top Electrode Signal UR 2 U 3 NC, 5 SENSE 6 NC 7 8 R Dim F 7.22 (83.3±0.3mm) 8.0 (205.8±0.3mm) 9.79 (28.7±0.3mm) Bottom Electrode Dim G ctive (Horizontal).79 (2.55mm) 5.37 (36.mm) 6.9 (6.95mm) H D E (2.).083 F Dim H ctive (Vertical) 3.6 (9.65mm).05 (02.9mm).90 (2.35mm) 2

21 Series FT 5-Wire Touch Screens DISTINCTIVE CHRCTERISTICS Compatible with Control Board USB/RS232C Equipped with EPROM for Saving Setting Data Device Drivers are Windows 7, 8 & 0 Compatible PC Install Device Driver General Specifications Items FTCS05B FTCU05B Interface RS232C USB 2.0 Full Speed Clock 6MHz 6MHz Supply Voltage 5.0V 5.0V (Bus Power) Resolution 0bit 0bit Current Consumption 350m maximum 350m maximum Communication Speed 9600 bps Communication Format Data ength: 8bit Parity: None Stop Bit: bsolute Maximum Ratings Items Symbols Minimum Maximum Notes Supply Voltage Input Voltage Operating Temperature Storage Temperature USB Cable System Configuration for USB USB Header V CC 0.3V +5.5V V TP V CC Touch Panel Input *V RS 5V +5V RS232C T OPR 0 T STG USB Controller Board 25 C 3 F IC Chip for nalog Touch Screen *V RS : pplies Only to RS232C +70 C +58 F +85 C +85 F Controller Boards & Drivers nalog Touch Screen Monitor vailable through NKK Switches Touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. For specifications or technical data for the controller boards and drivers, see NKK's web site or call our engineering support personnel. PC Install Device Driver Recommended Values Items Symbols Minimum Typical Maximum Notes Supply Voltage Operating Temperature System Configuration for RS232C T73 Receptacle RS232C Header Header for 5V RS232C Controller Board 5V DC Power Supply IC Chip for nalog Touch Screen T7 Receptacle Connects to Power Source V CC +.75V V T OPR C +58 F nalog Touch Screen Monitor No Condensation 22

22 5-Wire Touch Screens Series FT Controller Boards & Drivers DISTINCTIVE CHRCTERISTICS High Quality and Reliability Easy Integration Replacing Mouse Functionality Compatible with Control Board USB/RS232C Device Driver Compatible with Vista and Windows XP Operating Systems Type Interface: USB and RS232C High Speed and ccuracy Controller Boards Part No. Built-in Calibration Function Data Function Removal Built In to Eliminate Noise IC FTCSU58 Communication Protocol 5-Wire FTCS05B RS232C 5-Wire FTCU05B USB DISTINCTIVE CHRCTERISTICS The IC is for use with the 5- and -wire transparent touch screens, and is available for those who prefer to design their own controller boards. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the /D. The /D converter receives the value and sends a set of coordinate values as serial data or USB. OPTION CCESSORIES T73 Receptacle This Receptacle with code connects to RS232C communication of the controller boards. Controller Boards vailable for RS232C Controller Boards vailable for USB IC Chip & ccessories NKK offers controller boards compatible with USB or with RS232C. See web site or contact factory for specifications and technical data for any of the controller boards and drivers. Package Interface Supply Voltage * Rated Output Current Operation Frequency General Specifications for IC FTCSU58 /D Converter Resolution Operating Temperature Storage Temperature T7 Receptacle FQFP 8 Pins Serial Interface (synchronous) or USB (Full Speed 2.0) 3.3/5.0V Typ; USB vailable for 5V Only High evel: 70m ow evel: +70m 6MHz 0bit 20 C ~ +85 C ( F ~ +85 F) 0 C ~ +25 C ( 0 F ~ +257 F) * Total Output Electric Current mount of all the I/O Port T7 is a Receptacle with code to connect to power source of the control boards. For more details and dimensioned drawings of the accessories, go to NKK s web site or call our engineering support personnel. 23

23 Series FT Touch Screens STORGE, HNDING & INSTTION Handling of Controller Board Use arc prevention to protect device from static electricity. Power source should be activated after host and touch panel are connected. When inserting connector CN and touch panel tail, be sure the slider of connector CN is pulled. Do not pull more than 0 times. Do not alter the product. Do not use any commands other than the ones outlined in the specifications. Place the product away from noise source (such as inverter from CD operation) since tail can be affected by noise. If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. This product does not support suspended mode (USB). Protocol of USB transmission is one frame per one transaction. Contact factory if not using the protocol above. Warranty for one year after delivery. NKK warranties the -wire touch panel when it is used with the NKK control board and driver. Do not use third party control boards. NKK is not responsible for results of using damaged equipment with the controller boards. NKK Switches cannot assume responsibility for damages caused by software side during use of the touch screens. The touch screen pressed position may shift depending on various factors such as age, improper tail insertion or extreme temperatures. In such cases, recalibration is necessary. Installation Products are ESD sensitive and ESD protection is required. Do not pull on the tail. Do not apply stress to the tail area. void vibration or shock. void any force or stress that may cause deformation to the product. The touch screen mounting should not be loose. This may cause an adverse effect on detecting performance during operation. Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. The case or housing and upper electrode should have a space of about 0.5mm to accommodate expansion or shrinkage due to temperature variances. If a shock barrier is used, do not press hard on the upper electrode area. ny shock barrier should be installed more than 0.6mm away from. (0.5) pprox. Case/Housing Cushioning Material dhesive ayer * Sealing Material (0.6) Min. * Example: Double-sided Tape To secure the touch screen, secure the lower portion with a device such as the CD display panel. Do not attach the upper electrode with double-sided tape or similar product to avoid stress that can damage the upper or lower electrode. In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. void air pressure applied to the touch screen as it may cause the top electrode to force air through the air vent, effecting electric endurance. If pressure inside of the touch panel is reduced through the air vent, it may cause interference fringes or may remain in ON status. Ensure that the glass is handled carefully to prevent breakage during installation. Moisture from condensation on tail connection or edges may result in migration, causing short circuit failure. Remove protective film from the touch screen after installation is completed. CD ctive Visible Top Electrode (Film) Bottom Electrode (Glass) Example of Burr on Housing Interferes with Operation at Point 2

24 Touch Screens Series FT STORGE, HNDING & INSTTION Handling Precautions When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, and corners or edges can be sharp. Wear gloves when handling the product. Do not pick up the product by the tail or pull the tail area. Use gloves or finger cots to prevent fingerprints on surface. When handling the product, hold it outside of the viewing area. void stacking multiple products or placing other items on the product. When packing or storing, the glass should be positioned face up. Operating Precautions Operate with fingers or a touch screen stylus only. Do not press hard with a pen or similar object between viewing area and key area. Design Precautions With analog type, resistive value change (by aging or individual differences) can dislocate the input area. Input area can be calibrated with software. When installing on top of an CD, noise from the display device can create misoperation. To avoid noise, implement grounding the display device frame. Do not create software for simultaneous touch points, as analog type will read the center point between two touch points. When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. Contact resistance may cause chatter depending on pressing condition. Software should detect signal after it stabilizes. Other Precautions Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. Store product in original package and store at the temperature and humidity range specified. Do not store in an environment with acids or other corrosive gases or where condensation may occur. Products are guaranteed based on evaluation of standards within the moisture tolerance and usage temperature range, but not guaranteed to operate perpetually at this temperature. Note that an incorrect type of connector may damage the print surface. Calibration data from one touch panel should not be applied to another panel; each should be calibrated individually. Recalibration is necessary if connector has been removed from the tail and reconnected. ll specifications based on the tested touch screens only. Evaluate the products after installation with customer's equipment. NKK Switches reserves the right to make product improvement changes without notice. 25

25 Series TP0 -Wire Multi-Touch Resistive Touch Screens General Specifications Electrical Capacity (Resistive oad) Other Ratings TP0 Screen Size & spect Ratio W W W Note: spect Ratio Code = :3 Code W = 6:9 Power evel: 5.5V DC (resistive load) XY Resistive Value: 250 ~ 850Ω; Wide: 20 ~,500Ω inearity: ±.5% maximum Insulation Impedance: 0MΩ 25V DC Expected Operational ife: Writing: 50,000 operations minimum (approximately 30mm movement with stylus) Tapping:,000,000 operations minimum (pressing force.9n using silicone rubber, hardness 60 ) Touch ctivation Force: 0.02 ~.0N maximum Chattering Time: 0 milliseconds maximum ight Transmission: 80% typical (Touch Panel portion) Surface Hardness: 3H minimum (JIS K500) Environmental Data Operating Temperature Range: Storage Temperature Range: Relative Humidity: 20 C ~ +70 C ( F ~ +58 F) 0 C ~ +80 C ( 0 F ~ +76 F) +0 C (+0 F), humidity 90%, 20 hours TYPIC TOUCH SCREEN ORDERING EXMPE 0 Type -Wire nalog Touch Screen with 0." Screen Finger or Stylus Input K Operation ight Touch DESCRIPTION FOR TYPIC ORDERING EXMPE TP00 K K Package Options No Code B C Horizontal Tail Position -Wire nalog Touch Screen Only Touch Screen & Control Board Touch Screen & IC 26

26 -Wire Multi-Touch Resistive Touch Screens Series TP0 PRT NUMBERS & DESCRIPTIONS Tail spect Ratio :3 Horizontal Tail spect Ratio 6:9 Wide Frame with Horizontal Tail TP00-K TP006W-K TP02-K TP02W-K Part Number TP050-K TP056W-K TP090-K Screen Size in Inches TP00-K 0. TP02-K 2. TP050-K 5.0 TP090-K 9.0 TP006W-K 0.6 TP02W-K 2. TP056W-K 5.6 Key Dimensions 8.35 x (2.2mm x 58.mm) x (25.8mm x 8.3mm).972 x (30.mm x 228.mm).85 x.850 (376.3mm x 30.0mm) 9.07 x 5. (230.mm x 38.2mm) x 6.25 (26.2mm x 63.2mm) 3.55 x 7.68 (3.2mm x 93.5mm) -Wire nalog Touch Screens Viewing Dimensions 8.65 x 6.39 (25.0mm x 62.mm) x 7.06 (29.6mm x 88.mm) 2.30 x 9.38 (308.mm x 232.mm) x 2.02 (382.0mm x 307.mm) 9.89 x (233.mm x.3mm) 0.0 x 6.55 (26.26mm x 66.mm) 3.68 x 7.78 (37.5mm x 96.8mm) External Dimensions x 6.78 (225.6mm x 7.mm) x (260.0mm x 98.0mm) x (32.8mm x 25.5mm) 5.57 x (395.5mm x 32.0mm) x 6.09 (27.8mm x 5.8mm) x (275.0mm x 76.0mm).276 x 8.33 (362.6mm x 2.2mm) Panel Thickness (2.mm) (2.mm) (2.mm) (2.mm) 083 (2.mm) (2.mm) (2.mm) Terminal Detail Pin.039 (.0mm) Pitch ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength (77.7mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) ength 3.50 (80.0mm) 27

27 Series TP0 -Wire Multi-Touch Resistive Touch Screens TYPIC 0. DIMENSIONS Horizontal Tail spect Ratio :3 Tail Detail.97 ±0. x 3 (3.0) ± (0.7) ± Part Number (0.5) Screen Size in Inches TP00-K ±.0 XE Dim Pin Pin (0.3).02 ±0.05 (0.0) ± (225.6.±0.3mm) YO (80.0) ± (65.0) Contact Side (Gold Plating) Reinforcement, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Dim B 8.65 (25.0mm) Tail XE B G ctive Typical Dimensions Dim C ctive 8.35 (2.2mm) Dim D ctive (58.mm) Top Electrode Dim E Pins 6.39 (62.mm) YO C ctive (.5) ir Vent.059 ctive Bottom Electrode Signal Y UP 2 Y O 3 X E X RI Dim F 6.78 (7.±0.3mm) Dim G ctive (Horizontal).92 (.mm) H D E (2.).083 ±0.2 F Dim H ctive (Vertical) 3.37 (85.7mm) 28

28 -Wire Multi-Touch Resistive Touch Screens Series TP0 TYPIC 2. DIMENSIONS -Wire with Horizontal Tail spect Ratio :3 Tail Detail.97 ±0. x 3 (3.0) ± (0.7) ± (0.5) Part Number.97 ±.0 Screen Size in Inches TP02-K 2. Pin Pin (0.3) ±0.05 Contact Side.02 (Gold Plating) (0.0) ±.0.39 Reinforcement Dim (260.0±0.3mm) (80.0) 3.5 ±.0 (65.0) Tail.59 Dim B (29.6mm) XE XE Typical Dimensions Dim C ctive (25.8mm) Dim D ctive B G ctive Top Electrode YO (8.3mm), YO: Bottom Electrode Terminal XE, : Top Electrode Terminal YO Dim E 7.06 (88.mm) C Bottom Electrode ctive ctive Dim F (98.0±0.3mm) Pins (2.).083 ±0.2 Dim G ctive (Horizontal) 5.77 (3.5mm) Signal Y UP 2 Y O 3 X E X RI (.5) ir Vent.059 H D E F Dim H ctive (Vertical) (97.8mm) 29

29 Series TP0 -Wire Multi-Touch Resistive Touch Screens TYPIC 5.0 DIMENSIONS -Wire with Horizontal Tail spect Ratio :3 See Tail Detail Below.97 ±0. x 3 (3.0) ± (0.7) ± Part Number Pin Pin Screen Size in Inches TP050-K 5.0 (77.7) ± (67.0) (5.6).6 (0.3) ±0.05 Contact Side.02 (Gold Plating) (0.2) ± ±.0 Reinforcement Tail Dim (32.8±0.3mm) XE Dim B 2.30 (308.mm) B G ctive XE Top Electrode Typical Dimensions Dim C ctive.972 (30.mm) YO C Dim D ctive ctive YO (228.mm) ctive Bottom Electrode, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Dim E 9.38 (232.mm) Dim F (25.5±0.3mm) Pins Dim G ctive (Horizontal) (62.5mm) H D E Signal Y UP 2 Y O 3 X E X RI F (.5) ir Vent.059 (2.).083 ±0.2 Dim H ctive (Vertical).833 (22.75mm) 30

30 -Wire Multi-Touch Resistive Touch Screens Series TP0 TYPIC 9.0 DIMENSIONS -Wire with Horizontal Tail spect Ratio :3 See Tail Detail Below Pin Pin (80.0) ± (65.0) ±0..59 (0.3).02 ±0.05 Contact Side (Gold Plating) Reinforcement (0.0) ±.0.39 x 3 (3.0) ± (0.7) ± Part Number (0.5) Tail.97 ±.0 Screen Size in Inches TP090-K 9.0 XE Dim 5.57 (395.5±0.3mm) G ctive Dim B (382.0mm) XE B, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Typical Dimensions Dim C ctive.85 (376.3mm) YO Top Electrode Bottom Electrode YO Dim D ctive C.850 (30.0mm) ctive ctive Dim E 2.02 (307.mm) Dim F (32.0±0.3mm) Pins Dim G ctive (Horizontal) (98.mm) Signal Y UP 2 Y O 3 X E X RI (.5) ir Vent.059 H (2.) ± D E F Dim H ctive (Vertical) 6.39 (60.5mm) 3

31 Series TP0 -Wire Multi-Touch Resistive Touch Screens TYPIC 0.6 DIMENSIONS Horizontal Tail & Wide Frame spect Ratio 6:9 Tail Detail.97 ±0. x 3 (3.0) ± (0.7) ± Part Number (0.5).97 ±.0 Screen Size in Inches TP006W-K 0.6 (0.3) ± XE Pin Pin (0.0) ±.0.39 Dim (27.8mm) (80.0) ± (65.0) Contact Side (Gold Plating) YO Reinforcement Tail, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Dim B 9.89 (233.mm) XE B G ctive Typical Dimensions Dim C ctive 9.07 (230.mm) Dim D ctive 5. (38.2mm) Top Electrode YO Pins Dim E (.3mm) C ctive ctive Signal Y UP 2 Y O 3 X E X RI Dim F Bottom Electrode 6.09 (5.8±0.3mm) Dim G ctive (Horizontal).933 (25.3mm) (.5) ir Vent.059 H D E (2.).083 ±0.2 F Dim H ctive (Vertical) 2.98 (75.8mm) 32

32 -Wire Multi-Touch Resistive Touch Screens Series TP0 TYPIC 2. DIMENSIONS -Wire Wide Type with Horizontal Tail spect Ratio 6:9 Tail Detail.97 ±0. x 3 (3.0) ± (0.7) ± (0.5) Part Number.97 ±.0 Screen Size in Inches TP02W-K 2. Pin Pin (0.3) ±0.05 Contact Side.02 (Gold Plating) (0.0).39 Dim (275.0±0.3mm) (80.0) 3.5 ±.0 (65.0) Tail Dim B 0.0 (26.26mm) XE Typical Dimensions Dim C ctive (26.2mm) B G ctive Top Electrode Dim D ctive 6.25 (63.2mm) YO C Pins Dim E 6.55 (66.mm) ctive ctive ±.0 Reinforcement Bottom Electrode.083 (2.) ±0.2 XE YO, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Dim F Signal Y UP 2 Y O 3 X E X RI (76.0±0.3mm) Dim G ctive (Horizontal) 5.68 (38.89mm) (.5) ir Vent.059 H D E F Dim H ctive (Vertical) 3.65 (88.0mm) 33

33 Series TP0 -Wire Multi-Touch Resistive Touch Screens TYPIC 5.6 DIMENSIONS -Wire Wide Type with Horizontal Tail spect Ratio 6:9 See Tail Detail Below (0.3).02 ±0.05 (0.0).39 Pin Pin ±.0 Reinforcement Bottom Electrode.083 (2.) ± ±0. x 3 (3.0) ± (0.7) ± Part Number (80.0) 3.5 ±.0 (65.0) Contact Side (Gold Plating) (0.5) Screen Size in Inches TP056W ±.0 Tail Dim XE.276 (362.6±0.3mm) B Dim B 3.68 (37.5mm) G ctive XE C Top Electrode, YO: Bottom Electrode Terminal XE, : Top Electrode Terminal Typical Dimensions Dim C ctive 3.55 (3.2mm) ctive YO YO Dim D ctive 7.68 (93.5mm) ctive Dim E 7.78 (96.8mm) Dim F Pins 8.33 (2.2±0.3mm) Dim G ctive (Horizontal) 7.38 (8.3mm) Signal Y UP 2 Y O 3 X E X RI (.5) ir Vent.059 H D E F Dim H ctive (Vertical).27 (07.mm) 3

34 -Wire Multi-Touch Resistive Touch Screens Series TP0 -Wire Multi-Touch Screen Controller Boards & Drivers DISTINCTIVE CHRCTERISTICS Compatible with Control Board USB Device Driver is *Windows 7, 8 & 0 Compatible PC Install Device Driver bsolute Maximum Ratings Items Symbols Minimum Maximum Supply Voltage V CC +.5V +5.5V Input Voltage V TP Operating Temperature Storage Temperature USB Cable System Configuration for USB USB Header USB Controller Board T OPR T STG IC Chip vailable through NKK Switches 20 C ( F) 30 C ( 22 F) DISTINCTIVE CHRCTERISTICS Interface: USB Compatible with *Windows 7, 8 & 0 High Speed and ccuracy Built-in Calibration Function nalog Touch Screen Monitor Data Function Removal Built In to Eliminate Noise V CC +70 C (+58 F) +85 C (+85 F) * Windows is a registered trademark of Microsoft Corporation. Type Recommended Values Items Symbols Minimum Typical Maximum Notes Supply Voltage Operating Temperature V CC +.5V V T OPR Controller Boards Part No. 20 C ( F) Communication Protocol -Wire * TP00-KB USB * Includes any of the Multi-Touch Screen Models NKK's analog touch panels can be operated the same as PC mouse functions by combining a control board or device driver and analog touch screen. This includes the screen's multi-touch capabilities. For specifications or technical data for the controller boards and drivers, see NKK's web site or call our engineering support personnel. IC Chip for nalog Multi-Touch Screens NKK offers the option to order a controller board in a package with a touch screen. See ordering table for details. +70 C (+58 F) No Condensation The IC is for use with the -wire transparent touch screens. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the /D. The /D converter receives the value and sends a set of coordinate values as serial data or USB. Contact NKK Switches for the IC data sheet. NKK offers the option to order an IC chip in a package with a touch screen. See ordering table for details. 35

35 Series TP0 -Wire Multi-Touch Resistive Touch Screens Controller Board for USB Direction of Tail Insertion Contact Surface -Wire Multi-Touch Screen Controller Board for USB (65.0) (57.0) 2.2 ON OFF ON 2 3 CN NOG TOUCH SCREENS Setting Switch, SW2 ON 2 3 ot No. CN3 ON OFF Setting Switch, SW (30.0).8 (3.3) Dia Typ.30 (.0).039 (37.0).57 (3.95).56 CN -Wire nalog Touch Screen - Pins Pin No. Symbol Description Y UP Touch Screen Drive Output PSW2 2 Y O Touch Screen Drive Output PSW, PSW5 3 X E Touch Screen Drive Output PSW X RI Touch Screen Drive Output PSW3, PSW6 CN3 Header for USB - 5 Pins Pin No. Symbol Description V CC V CC 2 D D 3 D + D + GND V SS (OV) 5 FG Shield GND. The analog touch screen has a two-layer structure consisting of polyester film with an ITO membrane and sheet of glass. The surfaces of top and bottom electrodes have a uniform resistive film. One electrode draws in the X-axis direction, the other on the Y-axis direction. When pressure is applied, it changes the resistance value between X and X2 and Y and Y2, then converts to a digital signal. Top Electrode Electrode X X2 Y Bottom Electrode Y2 2. To interpret the touched position, 5V is applied to the top electrode (X and X2). Then the voltage on the arrow direction evenly changes. Output to /D Converter 3. With a touch to the center of the top electrode film, the touched position contacts the bottom film (glass), and 2.5V is output to Y (or Y2). The output signal is then converted to a digital signal and can be recognized as an X-axis coordinate value. In the same way, the Y-axis coordinate value can be read from Y and Y2 on the bottom electrode. Then the position where the X and Y axis coordinate value intersected is read as the contact position.. The resolution of the analog touch screens is relatively higher than the digital models and contributes to the variety of the screen designs available, including those displaying buttons. Since analog types generally detect signals as a point but not as a number on the keys, the signals may be input as text or drawings with a pen. The vertical and horizontal resolution (detection points) is,02 when a 0bit /D converter is used. The active area of each button is independent of each other, resulting in no interference between the areas. Vertical Detection Points,02 Button 2 Button Button 3 Horizontal Detection Points,02 2.5V X 0V X 2.5V X Y2 5V Y2 5V X2 Y X2 Y 0V X 0V 2.5V 5V X2 Y Y2 5V Y2 X2 Y 0V 2.5V 36

36 -Wire Multi-Touch Resistive Touch Screens Series TP0 STORGE, HNDING & INSTTION Handling of Controller Board Use arc prevention to protect device from static electricity. Power source should be activated after host and touch panel are connected. When inserting connector CN and touch panel tail, be sure the slider of connector CN is pulled. Do not pull more than 0 times. Do not alter the product. Do not use any commands other than the ones outlined in the specifications. Place the product away from noise source (such as inverter from CD operation) since tail can be affected by noise. If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. Warranty for one year after delivery. NKK warranties the -wire touch panel when it is used with the NKK control board and driver. Do not use third party control boards. NKK is not responsible for results of using damaged equipment with the controller boards. NKK Switches cannot assume responsibility for damages caused by software side during use of the touch screens. The touch screen pressed position may shift depending on various factors such as age, improper tail insertion or extreme temperatures. In such cases, recalibration is necessary. Installation Products are ESD sensitive and ESD protection is required. Do not pull on the tail. Do not apply stress to the tail area. void vibration or shock. void any force or stress that may cause deformation to the product. The touch screen mounting should not be loose. This may cause an adverse effect on detecting performance during operation. Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. The case or housing and upper electrode should have a space of about 0.5mm to accommodate expansion or shrinkage due to temperature variances. If a shock barrier is used, do not press hard on the upper electrode area. ny shock barrier should be installed more than 0.6mm away from. (0.5) pprox. Case/Housing Cushioning Material dhesive ayer * Sealing Material (0.6) Min. * Example: Double-sided Tape To secure the touch screen, secure the lower portion with a device such as the CD display panel. Do not attach the upper electrode with double-sided tape or similar product to avoid stress that can damage the upper or lower electrode. In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. void air pressure applied to the touch screen as it may cause the top electrode to force air through the air vent, effecting electric endurance. If pressure inside of the touch panel is reduced through the air vent, it may cause interference fringes or may remain in ON status. Ensure that the glass is handled carefully to prevent breakage during installation. Moisture from condensation on tail connection or edges may result in migration, causing short circuit failure. Remove protective film from the touch screen after installation is completed. CD ctive Visible Top Electrode (Film) Bottom Electrode (Glass) Example of Burr on Housing Interferes with Operation at Point 37

37 Series TP0 -Wire Multi-Touch Resistive Touch Screens STORGE, HNDING & INSTTION Handling Precautions When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, and corners or edges can be sharp. Wear gloves when handling the product. Do not pick up the product by the tail or pull the tail area. Use gloves or finger cots to prevent fingerprints on surface. When handling the product, hold it outside of the viewing area. void stacking multiple products or placing other items on the product. When packing or storing, the glass should be positioned face up. Operating Precautions Operate with fingers or a touch screen stylus only. Do not press hard with a pen or similar object between viewing area and key area. Design Precautions With analog type, resistive value change (by aging or individual differences) can dislocate the input area. Input area can be calibrated with software. When installing on top of an CD, noise from the display device can create misoperation. To avoid noise, implement grounding the display device frame. Do not create software for simultaneous touch points, as analog type will read the center point between two touch points. When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. Contact resistance may cause chatter depending on pressing condition. Software should detect signal after it stabilizes. Other Precautions Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. Store product in original package and store at the temperature and humidity range specified. Do not store in an environment with acids or other corrosive gases or where condensation may occur. Products are guaranteed based on evaluation of standards within the moisture tolerance and usage temperature range, but not guaranteed to operate perpetually at this temperature. Note that an incorrect type of connector may damage the print surface. Calibration data from one touch panel should not be applied to another panel; each should be calibrated individually. Recalibration is necessary if connector has been removed from the tail and reconnected. ll specifications based on the tested touch screens only. Evaluate the products after installation with customer's equipment. NKK Switches reserves the right to make product improvement changes without notice. 38

38 Membranes Series FM DISTINCTIVE CHRCTERISTICS Nonilluminated options in or 6 keys, illuminated choices in 2 or 6 keys.0mm (.039 ) tail pitch Easily integrated into designs: replaces multiple mechanical switches, soldered wires and cable assemblies Card insertion into design supports customized legends for nonilluminated models ctuating dome offers crisp, tactile feedback to positively indicate circuit transfer Illuminated models feature legends on embossed keypads dhesive backing for easy mounting GENER SPECIFICTIONS Power evel Contact Resistance Insulation Resistance Dielectric Strength Operational ife Contact Timing 2V DC 500Ω maximum 0V DC) 00 megohms 250V DC minimum 250V C minimum for one minute minimum,000,000 operations minimum 0 milliseconds maximum Nominal Operating Force.0N ~ 6.0N Stroke: Nonilluminated Illuminated with Overlay Operating Temperature Range Single Element ED Color: mber Ordering Information.06 ~.039 (0.mm ~.0mm) ~.07 (0.5mm ~.2mm) 5 C ~ +50 C (+5 F ~ +22 F) illuminated 5 C ~ +55 C (+5 F ~ +3 F) nonilluminated Part Number Illumination Number of Keys FMBN0BD Unit Forward Voltage (Typical) V F 2. V Forward Current (Typical) I F 20 m Forward Current (Maximum) I F 30 m * Forward Peak Current (Max) I FM 95 m Reverse Voltage (Maximum) V R 5.0 V ED SPECIFICTIONS The electrical specifications shown are determined at a basic temperature of 25 C. ED is an integral part of the switch. EDs are not sold separately. * Note: Pulse width 0.msec maximum with a maximum duty cycle ratio of /0 Description Surface Sheet Black (D) Gray (E) FMBN0BE Nonilluminated FMBN6BD 6 FMBN6BE 6 Overlay FMBP2BF Dot Illuminated 2 Gray Surface Sheet with with Embossed White Keypad FMBP6BF Overlay 6 and Gray egends E R + V F I F node Cathode R = E V F I F Where: R = Resistor Value (Ohms) E = Source Voltage (V) V F = Forward Voltage (V) I F = Forward Current () ED circuits are isolated and require an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. 39

39 Series FM Membranes TYPIC SWITCH DIMENSIONS Nonilluminated or 6 Keys (6.0).236 P (.0) Typ.039 (0.7) Typ.028 Pin Pin 5 (.0).57 (36.0).7 FMBN0BE Gray Surface Sheet 2 3 (0.5)R Typ (93.0) 3.66 (8.0) Sq Typ.709 (9.0).78 Typ (2.75).502 Typ (0.3).02 (25.5).00 (8.0).35 (.2).07 (70.0) (82.5) 3.28 (.0).039 () (2) (3) () Switch Circuit Matrix Detail For or 6 Key (3) (9) (5) Switch Circuit Matrix For Key Key numbers in parenthesis are not actually on panel and are for reference only Switch Circuit Matrix For 6 Key (0) (6) () (2) () (5) () (7) (6) (2) (8) (3) () Key numbers in parenthesis are not actually on panel and are for reference only (9.0).78 Typ (2.75).502 Typ (2.75).502 Typ Insertable egend Card for Key or 6 Key (9.0) Typ.78 (.0).039 (8.0) Sq Typ.709 (82.5) 3.28 Sq (93.0) Sq 3.66 (9.0) Typ.35 (0.7).028 P (.0) Typ.039 Pin (.0) (8.0) (0.) ~ (0.2) (0.5) R Typ Pin 8 FMBN6BD Black Surface Sheet (0.3).02 (8.0).35 (.2).07 Insertable egend Cards are supplied with the nonilluminated switch keypad assembly in Black, Gray and Yellow (70.0)

40 Membranes Series FM Illuminated 2 or 6 Keys TYPIC SWITCH DIMENSIONS P (.0) Typ (9.0) Typ (0.7) Typ (9.0) (8.0) (0.5) R Typ Pin 9 6 (.0).57 Pin Pin 8 ED Cable (7.0) 2.93 # Switch Circuit Matrix For 2 Key FMBP2BF Switch Cable (93.0) 3.66 (0.3).02 Typ ED Circuit Matrix For 2 Key (2.0).079 Dot illumination at upper left corner of each keypad () () (7) (*) (0) (2) (3) (5) (8) (6) (9) (#) NC () () (7) (*) (0) (2) (3) (5) (8) (6) (9) (#) NC (8.0).35 (70.0) Key numbers in parenthesis are not actually on panel and are for reference only (0) () (8) (C) Switch Circuit Matrix Detail For 2 or 6 Key ED Circuit Matrix Detail For 2 or 6 Key P (.0) Typ.039 (0.7)Typ.028 ED Cable (93.0) Sq 3.66 (9.0).78 Pin 9 6 (.0) Pin B C D E F Switch Circuit Matrix For 6 Key (9.0) Typ.35 (8.0).709 (0) () (8) (C) FMBP6BF (0.5) R Typ Pin 8 Switch Cable ED Circuit Matrix For 6 Key () (2) (5) (9) (D) (6) () (E) (3) (7) (B) (F) (0.3).02 Typ Dot illumination at upper left corner of each keypad () (2) (5) (9) (D) (6) () (E) (3) (7) (B) (F) (8.0).35 (70.0) (2.0)