0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields

Transcription

1 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative..4 mm Pitch, 1.5 mm oard-to-oard Connectors with Dual Shields FX12 Series Dual Shields (when mated) Patent Pending Header-side shield Receptacle-side shield Metal fittings Features 1. Dual shields uilt-in shield plates and metal fittings in the plugs and receptacles prevent electromagnetic emission and external interference on the entire 36 periphery of mated connectors. 2. Low-Profile oard-to-oard distance of 1.5 mm and reduced PC mounting pattern allows use in applications where space is limited. 3. Self alignment uilt-in self-alignment feature in the plug and receptacle allows mating / un-mating in limited spaces. 4. Consistent mated retention force Indents in the shield plates and contact configuration assure consistency of the mated retention forces irrespective of the contact numbers. Positive click sensation confirms fully mated condition. 5. Solder wicking prevention Nickel plating barrier on the contacts prevents solder compound intrusion (wicking) into the contact engagement areas. 6. oard placement with automatic equipment Packaged on tape-and-reel, the connectors have flat areas (.8mm) to allow use of vacuum nozzles. 7. RoHS Compliant All components and materials comply with the requirements of the EU Directive 22/95/EC. High Shielding Effectiveness Emitted Noise Level (dm) Low-Profile, Space-Saving with Reduced Connector Footprint (Shown 24-Position fully mated) Self Alignment of.3 mm Receptacle Frequency (GHz) Without shield plates With shield plates Plug A263

2 All non-rohs FX12 products Series.4 have been discontinued, mm Pitch, or will 1.5 be discontinued mm oard-to-oard soon. Please check Connectors the products status with on the Dual Hirose Shields website RoHS search at or contact your Hirose sales representative. Specifications Rating Current rating.3a Voltage rating 3V AC Operating temperature range -55ç to +85ç (Note 1) Storage temperature range -1ç to +6ç (Note 2) Storage humidity range Relative humidity 95% max. (No condensation) 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance 4.Vibration 5.Shock 6.Humidity Note 1: Includes temperature rise caused by current flow. Note 2: The term storage refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Item Specification Conditions 5 Mø min. No flashover or insulation breakdown. 1 mø max. No electrical discontinuity of 1μs or more. No damage, cracks or parts dislocation. No electrical discontinuity of 1μs or more. No damage, cracks or parts dislocation. Contact resistance: 12 mø max. Insulation resistance: 25 Mø min. 96 hours at 4ç, 9% to 95% R.H. No damage, cracks or parts dislocation. Contact resistance: 12 mø max. Insulation resistance: 5 Mø min. No damage, cracks or parts dislocation. Contact resistance: 12 mø max. 3 cycles No damage, cracks or parts dislocation. 7.Temperature cycle 8.Durability (mating / un-mating) 9.Resistance to soldering heat Part Material Finish Remarks Insulator Polyamide Color: lack UL94V- Plug Contacts Selective gold plated Receptacle Phosphor bronze Ground plates Gold plated Metal fittings Tin plated Ordering information FX12 No deformation of components affecting performance P -.4 SV V DC 1V AC/one minute 1 ma Frequency: 1 to 55 Hz, single amplitude of.75mm, 3 axis, 1 cycles Acceleration of 49 m/s 2, 11 ms duration, sine halfwave waveform, 3 cycles / each of 3 axis Temperature: -55ç +15ç to 35ç +85ç +15ç to +35ç Time: 3 2 to to 3 (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 36ç for 5 seconds Series name: FX12 Configuration : Without guide post Number of positions: 24, 4, Connector type P: Plug S: Receptacle Contact pitch:.4 mm Termination configuration SV: SMT A264

3 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products FX12 status Series.4 on the Hirose mm website Pitch, RoHS 1.5 search mm at oard-to-oard Connectors or contact your with Hirose Dual sales Shields representative. G.4.23±.2 (Land pattern ).2±.2 (Metal mask) G.4 A±.12.4±.2 (Land pattern).35±.2 (Metal mask) Plugs A±.12 ±.1 P=.4±.6 (.15) (.3) C± ±.3 (.1) 4.9±.2 Recommended PC Mounting Pattern and Metal Mask Dimensions Recommended metal mask thickness:.12 mm (Land pattern).9±.2 (Metal mask) D.1 E +.1 Notes: 1 Positions marked indicate a ground circuit connections The co-planarity of SMT terminations is.1 maximum. No polarity orientation for board mounting. Dimensions in parentheses ( ) are reference dimensions. All dimensions in mm. Part number CL No. Number of positions A C D E RoHS FX12-24P-.4SV FX12-4P-.4SV FX12-6P-.4SV Packaging : 3, pieces per reel A265

4 All non-rohs FX12 products Series.4 have been discontinued, mm Pitch, or will 1.5 be discontinued mm oard-to-oard soon. Please check Connectors the products status with on the Dual Hirose Shields website RoHS search at or contact your Hirose sales representative. A±.12.4±.2 (Land pattern).35±.2 (Metal mask) MIN. Receptacles A±.12 ±.1 P=.4±.6 (.15) (.3) C±.3 1.2±.3 (.1) 4.2±.2 Recommended PC Mounting Pattern and Metal Mask Dimensions G.4.23±.2 (Land pattern).2±.2 (Metal mask) G.4 Recommended metal mask thickness:.12 mm (Land pattern).9±.2 (Metal mask) 4 D E F MIN. 1 Notes: 1 Positions marked indicate a ground circuit connections The co-planarity of SMT terminations is.1 maximum. No polarity orientation for board mounting. Do NOT place any components within area indicated by the broken line. 5 Do NOT place conductive traces in areas indicated by. 6 7 Dimensions in parentheses ( ) are reference dimensions. All dimensions in mm. Part number CL No. Number of positions A C D E F RoHS FX12-24S-.4SV FX12-4S-.4SV FX12-6S-.4SV Packaging : 3, pieces per reel A266

5 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products FX12 status Series.4 on the Hirose mm website Pitch, RoHS 1.5 search mm at oard-to-oard Connectors or contact your with Hirose Dual sales Shields representative. Packaging Specifications Plug 2±.1 12±.1 4±.1 Ø (1.7) (.5) (.3) (2) (C) Ø13±.5 (Ø38) (Ø8) ±.3 A± ±.1 Unreeling direction Reel dimensions Part number A C FX12-24P-.4SV FX12-4P-.4SV FX12-6P-.4SV All dimensions in mm A267

6 All non-rohs FX12 products Series.4 have been discontinued, mm Pitch, or will 1.5 be discontinued mm oard-to-oard soon. Please check Connectors the products status with on the Dual Hirose Shields website RoHS search at or contact your Hirose sales representative. Packaging Specifications Receptacle 2±.1 12±.1 4±.1 Ø A± ±.1 (1.7) (.5) (.3) (2) (C) Ø13±.5 (Ø38) (Ø8) ±.3 Unreeling direction Reel dimensions Part number A C FX12-24S-.4SV FX12-4S-.4SV FX12-6S-.4SV All dimensions in mm A268

7 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products FX12 status Series.4 on the Hirose mm website Pitch, RoHS 1.5 search mm at oard-to-oard Connectors or contact your with Hirose Dual sales Shields representative. Recommended solder temperature profile. Temperature (ç) ç (9~12sec.) 2ç (MAX 6sec.) MAX 25ç 22ç Time (Seconds) Note: The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PC mounting surface. < HRS test conditions > Solder method :Reflow Environment :Room air Solder paste :96.5%Sn/3.%Ag/.5%Cu Test board :Glass epoxy 4mm 3mm 1mm thick Metal mask :.12mm thick Reflow cycles :2cycles The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may very, depending on solder paste type, volume / thickness and board size/ thickness. Cosult your solder paste and equipment manufacture for specific recommendations. Cleaning recommendations Organic solvent cleaning Solvent type Room temperature cleaning Heated cleaning IPA (Isoporopyl alcohol) HCFC (Hydrochlorofluorocarbon) Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes it s affects on metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. A269

8 All non-rohs FX12 products Series.4 have been discontinued, mm Pitch, or will 1.5 be discontinued mm oard-to-oard soon. Please check Connectors the products status with on the Dual Hirose Shields website RoHS search at or contact your Hirose sales representative. Handling Precautions when mating mounted connectors. MAX.3 MAX.3 FX12*-**S-.4SV FX12*-**P-.4SV Fig.1 Start the engagement of the connectors within the specified self-alignment range of.3 mm, while keeping the boards parallel to each other. Do NOT start mating of the mounted connectors under an angle. Correctly position the connectors over each other and assure that both boards are parallel to each other. (.5mm) (.5mm) When the connectors are correctly aligned (and both boards are parallel to each other) apply even force until full mating is confirmed by the click sensation. Caution When the connectors are mounted on the FPC, special care should be excercised NOT to have the forces of the FPC s bend or twist affecting the fully mated connectors. Device case or cushioning material should be used to keep connectors fully mated. A27

9 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products FX12 status Series.4 on the Hirose mm website Pitch, RoHS 1.5 search mm at oard-to-oard Connectors or contact your with Hirose Dual sales Shields representative. Handling Precautions when un-mating Keep the boards (with mounted connectors) parallel to each other. If parallel disconnection is impossible, start un-mating at one end exercising extreme caution to apply force at the center of the connector itself, away from the solder joint rows (Ref. Fig A and Fig. ) Fig. A Fig. Do NOT start disconnection at the sides as the connector can be damaged, voiding the warranty and making the reengagement impossible. A271

10 All non-rohs FX12 products Series.4 have been discontinued, mm Pitch, or will 1.5 be discontinued mm oard-to-oard soon. Please check Connectors the products status with on the Dual Hirose Shields website RoHS search at or contact your Hirose sales representative. Technical Documentation Eye Pattern Output Waveform Shielding Characteristics (1) (Measurement Results Using a 2-Chamber Shielded Room) 6 Shielding Effect (d) Sample 1 Sample 2 Sample Frequency (GHz) Explanatory Note Measurement values of the unshielded connectors were set as the zero level of the vertical axis of the graph. The graph uses unshielded connectors as the reference and indicates the noise leakage suppression (shielding) effect of the shielded connectors as a relative comparison value. In comparison to the unshielded connectors there was a noise suppression effect of 1 d to 3 d over the frequency range of 1 MHz to 3 GHz. Shielding Characteristics (2) (oard-to-oard Shielding Comparison Using a Magnetic Field Probe Method: IEC Compliance) Without shields With shields [d μa/m] Explanatory Note A signal of the 266 MHz operating frequency was transmitted through all contacts, over a frequency range of 1 MHz to 3 GHz. The magnetic field leaking to the surroundings from the gap between the boards was measured with a magnetic probe to provide the (mapping data) results. A272

11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: FX12-4P-.4SV FX12-4S-.4SV FX12-24P-.4SV FX12-24S-.4SV FX12-6P-.4SV FX12-6S-.4SV FX12M-8P-.4SV FX12M-8S-.4SV FX12-4P-.4SV(3) FX12-24P-.4SV(3) FX12-4S-.4SV(3) FX12-6P-.4SV(3) FX12-24S-.4SV(3) FX12-6S-.4SV(3)