Desolder. Lift. Position. SOLDER. WTQB1000 rework system

Transcription

1 Desolder. Lift. Position. SOLDER. WTQB1000 rework system 1

2 Freely positionable arm with exchangeable attachments The arm can be positioned completely freely. Components are positioned using three XYZ control dials. User-friendly software Control the camera from your PC. Quick and easy to install and use. Working profiles can be individually created and configured and can be called up again at any time. HD camera Monitoring, controlling, positioning: intelligent video technology guarantees outstanding results for the exacting rework process. Vacuum component holder Easy, precise placement of the components in X, Y and theta directions. Flexible tool holder This not only holds the vacuum pick-up pens and vacuum pens, but also enables multiple attachments to be held and exchanged safely while hot. Hot air tool Process reliability, even when manually soldering and desoldering components. Thermocouple connections Two designs for monitoring optimization and process optimization. Wide range of components For varied sizes and types, such as BTC, plugs, small passive, QFP and LED (1.0 mm to 42 mm) Flexible magnetic board holders Assemblies can easily be fastened and fixed using flexible magnetic holders, magnetic stop rails, a vacuum pipette and rotation. Infrared bottom heating Consistently powerful preheating of the entire assembly with four individually connectible heating zones in accordance with current standards. Freely positionable stop rail Any shape assembly can be safely and securely anchored with a magnetic system. Vacuum desoldering and pickup pen Thorough, clean removal of any residual solder. The vacuum pick-up pen helps users to achieve dependably accurate results. 2 3

3 Features and benefits Process reliability No component too small for the cost-effective WTQB1000 Thanks to the integrated camera, even the smallest components can be positioned and repaired manually with maximum precision. The user-friendly software makes installing and using the rework station simple. All working profiles can be created and customized for each application, are editable, and are stored in memory for easy recall. The ideal system for any situation: even suitable for small and medium businesses as a cost-effective rework solution and highly precise standalone workstation that enables optimal work on multilayer assemblies. The unit is ESD safe and prevents delicate components being damaged, enabling it to be used in sensitive installation areas. Perfection through positioning. Precise positioning and optimal heat distribution 1 3 DESOLDERING Components are heated directly from above using the hot air nozzle, while at the same time, the entire assembly is heated gently from below by the infrared heating. The component can be desoldered quickly, easily and carefully. POSITIONING The high-definition camera ensures that the placement can be precisely replicated, time after time. The lens can be set to various levels of zoom. 2 4 LIFTING The vacuum pipette can lift out the component safely and easily. SOLDERING Independent creation and maintenance of reflow profiles with individual temperature parameters enables reliable, reproducible soldering results. Rework, from start to finish Precise, reproducible placement using a desktop or laptop PC monitor with a software-controlled HD camera The live screen capture from the high-definition camera enables the component to be positioned in the X, Y and theta directions with pinpoint accuracy. Infrared bottom heating Consistent preheating and heat distribution to prevent the uneven temperature fluctuations that cause mechanical tensions. Precise, camera-assisted component placement Suitable for even the smallest components, starting at 1.0 mm and up Performs the entire rework process Flexible magnetic anchoring system Very easy and convenient for manual use Software-controlled rework cycle Unparalleled price / performance ratio Full range of tools and accessories Exact replication of results, time after time No visual calibration required 4 5

4 Station and accessories* WTQB1000 Basic Rework Station Technical data WTQB V NA WTQB1000N** ** Includes PC and monitor Dimensions (L x W x H) 660 mm x 360 mm x 390 mm 26 x 14.2 x 15.4 Power supply voltage 120 V / 60 Hz Min. component size 1 mm x 1mm / 0.4 x 0.4 Max. component size 42 mm x 42 mm / 1.7 x 1.7 Bottom heater Max W (infrared) Hot air tool 300 W Recommended max. PCB size 200 mm x 260 mm / 8 x 10.2 Compressed air supply bar / PSI Flow control 2 35 l/m Air consumption Without vacuum: max. 35 l/min, 1.3 CFM With vacuum: max. 85 l/min, 3.0 CFM Weight excl. packaging 22 kg / 48.5 lbs. Noise emission Without vacuum: 58 1 m With vacuum: 62 1 m WTQB1000 QFP Nozzles WTQB1000 CSP QFN Nozzles WTQB1000 BGA Nozzles Nozzle 15 x 15 T Nozzle 9 x 9 T x Nozzle 20 x 20 T Nozzle 11 x 11 T x 23 T Nozzle 20 x 26 T Nozzle 13 x 13 T x 27 T Nozzle 25 x 25 T Nozzle 16 x 16 T x 31 T Nozzle 30 x 30 T x 35 T Nozzle 36 x 36 T x 37.5 T Nozzle 45 x 45 T x 40 T WTQB1000 Vacuum Pick-up Pens 4.5 mm T mm T mm T mm T Print station T mm T Dip station T mm T µsmd pocket station T mm T µsmd feeder station T WTQB1000 Process Stations * Accessory kits for solder paste printing, cleaning, reballing and more available on request. 7

5 We re here to help! 1- (866) weller-toolsus.com 2016 Apex Tool Group, LLC 1000 Lufkin Road, Apex, NC USA ATG-2845 ITEM NO. T M 3/17 WA RRD Specifications subject to change without notice.