Product Information SCX-PCIE

Transcription

1 Product Information SCX-PCIE Secondary CompactPCI Serial Backplane System Slot Controller NVMe & SATA Mass Storage Triple Gigabit Ethernet & USB.0 Front I/O Mezzanine I/O Expansion Board (CPU Side Card) Document No. 90 October 0 Preliminary

2 General The SCX-PCIE is a mezzanine side card for EKF CPU boards, equipped with a PCIe Gen packet switch, on-board NVMe and SATA mass storage, and high speed front I/O. The PCI Express switch supports a secondary CompactPCI Serial backplane with up to eight peripheral slots, four links organized as Gen x, thereby expanding a CompactPCI Serial system from to peripheral card slots in total. The SCX-PCIE is suitable for EKF CPU carrier cards such as the SC-CONCERTO or SC-FESTIVAL, which are equipped with two HSE (high speed expansion) mezzanine connectors, for eight PCIe Gen lanes. The CPU carrier board and SCX-PCIE side card assembly requires HP front panel width together, and must be inserted into the particular system slots of two adjacent backplanes. While the CPU card fits into a CompactPCI Serial backplane which has its system slot right aligned, the SCX-PCIE meets the left aligned system slot of the neighbouring secondary backplane. As a mass storage solution, the SCX-PCIE is provided with an M. socket for an NVMe (PCIe ) or SATA SSD module. Another socket is suitable for either a PCIe Mini Card, or msata SSD. Furthermore, the SCX-PCIE is equipped with three and three USB.0 ports for front I/O. EKF -- ekf.com

3 Features Feature Summary General < Mixed function mezzanine side card for EKF CompactPCI Serial CPU boards < Form factor single size Eurocard (board dimensions 00x0mm ) < PICMG CompactPCI Serial (CPCI-S.0) system slot card < Based on new mezzanine connectors HSE/HSE ( x PCIe Gen) < Suitable e.g. for use with CPU cards SC-CONCERTO or SC-FESTIVAL < HP assembly together with CPU card < -lanes PCI Express Gen switch < Supports secondary CompactPCI Serial backplane < Provides Gigabit Ethernet front panel I/O ( x RJ) < Provides USB.0 front panel I/O ( x Type A) < Provides mass storage capability ( x M. NVMe, x msata) Backplane Connectors < CompactPCI Serial backplane connectors P, P, P, P, system board pin assignment < PCI Express support for all eight peripheral slots of a secondary CompactPCI Serial backplane < Four links Gen x (available on peripheral slots,,, ) < Four links Gen x (available on peripheral slots,,, ) < Can be used with any standard CompactPCI Serial backplane (system slot left aligned) PCI Express Switching < -lane -port PCI Express Gen packet switch X < Upstream x link wired to the HSE mezzanine connector (CPU card PCH) < Downstream x links to the CompactPCI Serial backplane < Downstream x link to the NVMe SSD M. socket < -lane -port PCI Express Gen packet switch PIC9XG0PR < Upstream x link wired to the HSE mezzanine connector (CPU card PCH) < Downstream x links to the CompactPCI Serial backplane < -lane -port PCI Express Gen packet switch PIC9XG0PR < Upstream x link wired to the HSE mezzanine connector (CPU card PCH) < Downstream x links to the I0 Gigabit Ethernet NICs < Downstream x link to the TUSB0 USB controller Front Panel I/O < x RJ Gigabit Ethernet jacks, three individual on-board I0-IT controllers < 000BASE-T, 00BASE-TX, 0BASE-T compliant data transfer rate < x USB.0 (. Gen) Type A receptacles < Two USB ports via on-board USB controller, one USB port derived from HSE mezzanine connector EKF -- ekf.com

4 Feature Summary Networking < Three individual networking interface controllers (NIC), based on PCI Express < 000BASE-T, 00BASE-TX, 0BASE-T connections < Intel I0-IT -0 C to + C operating temperature controllers w. integrated PHY < IPv/IPv checksum offload, 9.KB Jumbo Frame support, EEE Energy Efficient Ethernet < IEEE 0.Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams (TSN) < IEEE and 0.AS packets time stamping for high-precision time synchronization < All ports wired via RJ front panel connectors USB < Upper front panel receptacle wired to HSE mezzanine connector (CPU carrier card PCH) < Middle and lower connectors wired to PCI Express dual port USB.0 controller TUSB0 < USB. Gen (formerly USB.0) xhci (extensible host controller interface) SuperSpeed supported < USB.0 high-speed, full-speed, low-speed supported < x front panel Type-A USB.0 host connectors < V BUS (+V).A high current power switches assigned to front panel connectors Mass Storage Solutions < M. (formerly known as NGFF) socket for an NVMe type SSD module up to 0 size < PCI Express Gen x interface (M-key socket) < Socket height.h (double sided module allowed) < Capacity up to TB as of current < Suitable for operating system installation (boot device) < Alternate usage with an SATA type SSD B-M key < Autosensing analog switch for selection between PCIe and SATA operation < On-Board G SATA controller SE90 < PCI Express Mini Card socket, full-size or half-size modules < PCI Express Mini Cards of all styles supported: USB.0 and PCIe based, and msata < Autosensing analog switch for selection between PCIe and SATA operation < On-Board G SATA controller SE90 < Suitable for wireless applications e.g. WLAN, Bluetooth or G/G/LTE modem card < Micro SIM card holder associated (mm x mm ETSI TS 0 V9.0.0, Mini-UICC) < Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking) < Custom specific F/P design for additional pigtail SMB antenna connectors (HP front or wider) < Custom specific F/P design for non-radio applications e.g. CAN-FD (HP or wider) Applications < Local expansion (side card) for EKF CPU boards < System expansion with a secondary CompactPCI Serial backplane < Supports PCI Express on up to eight peripheral slots (x Gen, x Gen). < Multi GPU card systems < Autonomous driving test equipment < Rugged environment applications EKF -- ekf.com

5 Feature Summary Environmental, Regulatory < Designed & manufactured in Germany < ISO 900 certified quality management < Custom specific development available on request < Long term availability < Rugged solution < Coating, sealing, underfilling on request < RoHS compliant < Operating temperature -0 C to + C (industrial temperature range) < Storage temperature -0 C to + C, max. gradient C/min < Humidity %... 9% RH non condensing < Altitude -00m m < Shock g 0.ms, g ms < Vibration g -000Hz < EC Regulations EN0, EN0, EN090- (UL090-/IEC090-) < MTBF tbd years EKF -- ekf.com

6 System Requirements Product Information SCX-PCIE Secondary Backplane Controller The SCX-PCIE is a mezzanine side card, to be fixed on top of a suitable CPU carrier board. The pitch between carrier PCB and mezzanine PCB is HP, resulting in a HP common front panel for the entire assembly. Two mezzanine inter-board connectors are provided, for distribution of PCI Express signals and power from the CPU carrier to the SCX-PCIE side board. The SCX-PCIE can be used together e.g. with the SC-CONCERTO or SC-FESTIVAL CPU card. The SCX-PCIE is a system slot board with respect to a secondary CompactPCI Serial backplane (system slot left aligned). This allows for a total of peripheral slot cards, which doubles the resources of a normal CompactPCI Serial system. USB.0 HSE SCX-PCIE EKF ekf.com M M. USB.0 USB.0 PCI Express Mini Card or msata NVMe PCIe x or SATA P P 0 Dual SIM 0 P HSE P SCX-PCIE Mezzanine Side Board EKF ekf.com EKF -- ekf.com

7 Front Panel DP S USB N DP PG GP RB HD USB S P draft onl y - do not scale EKF ekf.com OT SC- FESTIVAL SCX-PCIE HP Assembly Shown EKF -- ekf.com

8 Block Diagram Front Panel I/O USB.0 I0IT PIC9XG0PR P-HSE PIC9XG0PR NIC PCIe Gen Switch PCIe PCIe PCIe PCIe PCIe Gen Switch _ Gen PCIe I0IT Option _ NIC SATA SATA G SE 90 CBTL00 _ x I0IT NIC _ x Micro SIM M. 0-0 PCI Express x (NVMe) SATA G SATA USB PCIe SATA PCIe Gen x Gen PCIe Switch _ x msata CBTL 00 _ x _ PCI Express Mini Card Gen _ PCIe USB HUB.0 M-Key TUSB0 ZDB USB.0 USB.0 PCIe Gen x Side Card for SC/SC HP Assembly P-HSE Simplified Block Diagram SCX-PCIE EKF ekf.com Secondary Backplane P P P P P P P/P not used EKF -- ekf.com

9 Backplane Resources Product Information SCX-PCIE Secondary Backplane Controller up to slots P P P P P P Primary Backplane System Slot Right 9 SYS (-) Clk (-) Gen (-) Gen (-) SATA PCH (-) SATA RAID (-) USB (-) USB (-) Gen x () Gen ½ x () Gen ½ x () USB () SC- FESTIVAL SC XPCIE - Resources w. + Slots Secondary Backplane 9 SYS up to slots Clk (-) Gen x (-) GA GA 0 GA 0 GA 00 GA 0 GA 00 GA 00 GA 000 Gen x (/) Gen x (/) R R R R R R R R Secondary Backplane System Slot Left Gen x () Gen x () Gen x Gen x Gen x Gen x Gen x Gen x Gen x Gen x SCX- PCIE Peripheral Slot x Peripheral Slot x Peripheral Slot x Peripheral Slot x Peripheral Slot x Peripheral Slot x Peripheral Slot x Peripheral Slot x EKF ekf.com EKF -9- ekf.com

10 The SCX-PCIE delivers PCI Express links to any slot of a + secondary CompactPCI Serial backplane. Four peripheral card slots are connected as x to the X -lane PCIe Gen switch; another slots are wired to an optional PIC9XG0PR Gen switch for x links. With respect of peripheral card slot, please note the discontinuity here, due to customers request. For a system with peripheral card slots Gen x therefore a standard secondary backplane with minimum peripheral card slots would be rquired (or a slot custom backplane). No other backplane high speed signal types than PCIe are supported by the SCX-PCIE. For peripheral cards which need Ethernet, USB and/or SATA in addition, please refer to the CPU carrier Card resources (primary backplane). EKF -0- ekf.com

11 USB Connectors The SCX-PCIE is equipped with three front panel receptacles for USB.0 (. Gen) or USB.0 Type-A cable connectors (USB root hub). The middle and lower front connectors are wired to an on-board dual-port SuperSpeed xhci controller TUSB0, while the upper receptacle is tied to the CPU carrier card PCH via the mezzanine connector HSE. Hence, only the upper USB connector is initialized during POST and can be used for BIOS setup (keyboard) or together with a boot device, whereas the middle and lower connectors will be enabled not until the operating system takes over control. USB x Type-A USB.0 (. Gen) USB.0 upright (90 side) receptacles V BUS +V,.A max ) EKF ekf.com USB D- USB D+ SS RX- SS RX+ SS TX- 9 SS TX+ ) +V via.a current-limited electronic power switches. Power rail may be switched off by software independently for the middle and lower USB connectors (upper port permanently enabled). The maximum available current for all USB connectors is A in total. Each SCX-PCIE USB connector provides +V (V BUS ) for powering external devices. Electronic switches limit the maximum output current of each individual USB connector to a safe level. For rugged applications EKF offers custom specific USB cable connector retainer solutions (similar picture below). EKF -- ekf.com

12 Ethernet Connectors Product Information SCX-PCIE Secondary Backplane Controller All Ethernet ports on the SCX-PCIE are based on individual I0IT PCIe to Gigabit Ethernet on-board controllers, by auto-negotiation suitable for easy network connection to other computers or Ethernet switches. The range of applications includes router or gateway configurations, or data acquisition (e.g. cameras). Together with the two ports of the CPU carrier boards there are five Ethernet ports available in total for the card assembly. Hence the RJ jacks on the SCX-PCIE are referenced here as //. Gigabit Ethernet Ports // (RJ) NC_MDX0+ NC_MDX EKF ekf.com Draft - Do Not Scale Port NC_MDX+ NC_MDX+ NC_MDX- NC_MDX- NC_MDX+ NC_MDX- NC_MDX0+ NC_MDX0- NC_MDX+ Port NC_MDX+ NC_MDX- NC_MDX- NC_MDX Port NC_MDX- NC_MDX0+ NC_MDX0- NC_MDX+ NC_MDX+ NCMDX- NC_MDX- NC_MDX+ NC_MDX- The lower green LED of each front panel connector indicates LINK established when continuously on, and data transfer (activity) when blinking. If the lower green LED is permanently off, no LINK is established. The upper green/yellow dual-led signals the link speed Gbit/s when lit yellow, 00Mbit/s when lit green, and 0Mbit/s when off. EKF -- ekf.com

13 M. Connector Product Information SCX-PCIE Secondary Backplane Controller The SCX-PCIE is provided with an M. module host connector (M-key). After inserted, the M. module must be locked manually by a screw, in order to withstand shock and vibration. M. Module Fixation (Picture Similar) Mechanical details and pin-out configurations are described by the PCI-SIG 'PCI Express M. Specification'. The M. pin-out complies with the 'Socket M SSD Drive', with module dimensions from 'Type to 0', either height option 'S, D, S, D, D'. Basically, the M-key coded M. connector is suitable for an NVMe SSD module and provides a PCIe Gen x link, derived from the X switch, for a data transfer rate of up to Gbps. As an alternate, the M. socket can also be used together with an SATA SSD module. Typically, SATA modules accept both B and M coded host connectors. The SCX-PCIE is provided with an autosensing circuitry, which can detect an SATA style M. SSD via pin 9 of the M. socket (DET). By specification, this signal is for SATA modules (open for PCIe operation). A CBTL00A analog switch selects between PCIe (lane 0) and the SATA channel, which is derived from an SE90 G SATA controller. EKF -- ekf.com

14 M NVMe PCIe x or SATA M. M-Key Pin - EKF Part # V +.V TN NC TP NC 9 0 LED# RN +.V RP +.V +.V TN +.V TP 9 0 NC NC RN NC RP NC NC TN 9 0 NC TP NC NC RN NC RP NC EKF -- ekf.com

15 M NVMe PCIe x or SATA M. M-Key continued Pin SMB_CLK * TN0 (SATA B+) SMB_DATA * TP0 (SATA B-) ALERT * NC RN0 (SATA A-) NC RP0 (SATA A+) 9 0 RST# CLKREQ# REFCLKN WAKE# REFCLKP RSV RSV M-Key 9 0 M-Key M-Key M-Key M-Key M-Key M-Key M-Key NC SUSCLK DET ** V +.V +.V * Logic level.v signals - LSF00 level shifter to.v on-board ** Signal used to switch between PCIe and SATA mode PCI Express M. Specification Socket PCIe-based Module Pinout (Module Key M) EKF -- ekf.com

16 Mini Card Host Connector The SCX-PCIE is provided with a PCI Express Mini Card host connector. It is suitable for PCIe based modules, and also USB.0 driven Mini Card modules. As an alternate, the socket can be used also with msata SSD modules. MC PCI Express Mini Card or msata SSD PCI Express Mini Card Socket (...0.) & Latch (...0.9) PCIE_WAKE# +.V COEX (GPIO//0/) COEX (GPIO///) +.V CLKREQ# (NC) UIM_C 9 0 UIM_C EKF ekf.com PCI Express Mini Card PCIE_CLK- UIM_C PCIE_CLK+ UIM_C UIM_C UIM_C UIM_C 9 0 W_DIS# (GPIO0///) RST# PCIE_RN (SATA +B) +.V PCIE_RP (SATA -B) +.V 9 0 SMB_CLK PCIE_TN (SATA -A) SMB_DAT PCIE_TP (SATA +A) USB_D- * USB_D+ * +.V V LED_WWAN# / NC ** LED_WLAN# RSV (NC) LED_WPAN# RSV (NC) +.V RSV (NC) 9 0 W_DIS# (GPIO//9/) +.V Power: The socket can supply a Mini Card with +.V/.A and +.V/A * USB.0 derived from CPU carrier card PCH via HSE mezzanine connector ** Pin is used for autosensing between PCIe or msata cards (PCIe =, msata=nc) EKF -- ekf.com

17 With respect to PCIe, the Mini Card socket is wired to the mezzanine connector HSE. For msata usage the host connector is tied to the SE90 SATA G controller. A CBTL00 analog switch is provided to select automatically between both card types. After inserted, the Mini Card has to be fixed by a snap-in latch (full-size modules 0.0mm length), or will have to be secured manually by screws (mini size modules.0mm length), in order to withstand shock and vibration. Full size Mini Cards are fixed by a latching (snap-in) element at the module end. A half size Mini Card must be fastened manually by screws M.xmm to corresponding M. soldered nuts provided on the SCX-PCIE PCB. 0.mm height nylon washers are required in addition as spacing elements between the PCB nuts and the half size Mini Card. Another approach would be to use a mechanical extender on half size Mini Cards, as shown below. The Mini Card socket is not suitable for some proprietary modules, which may provide special services, e.g. voice I/O, resulting in conflicts with the host connector pin assignment. Be sure that your Mini Card complies with the PCI Express Mini Card Specification (PCI-SIG). EKF -- ekf.com

18 Mezzanine Connectors HSE, HSE The SCX-PCIE is provided with two male mezzanine connectors on the bottom side of the PCB, which mate with the female mezzanine connectors on the carrier CPU card, for a resulting board-to-board mounting height of.mm (HP effective pitch, HP F/P width in total). HSE HSE is used to pass a PCIe x link from the CPU carrier card to the SCX-PCIE on-board -lane - port PCIe switch (upstream). One downstream port of this switch is wired to the M. NVMe connector, for a suitable SSD mass storage module. The other PCIe downstream links are in use for the SCX-PCIE backplane connectors (secondary CompactPCI Serial backplane). In addition, the upper front panel USB.0 connector is wired to the HSE mezzanine connector. The Mini Card socket USB.0 connection is also routed across HSE. With respect to the CPU boards SC-CONCERTO and SC-FESTIVAL all resources provided by the HSE/ mezzanine connectors are derived from the carrier card CM PCH. HSE HSE is provided to supply the SCX-PCIE side card with four additional PCIe lanes. A PCIe x link is established for each of two PIC9XG0PR PCIe switches. The first switch is wired to the on-board I0IT Ethernet controllers, and the TUSB0 USB.0 controller, for front panel I/O. The second PCIe switch is optional, and supports the CompactPCI Serial backplane with Gen x links (peripheral slots ///). The rd HSE PCIe x link is dedicated to the PCI Express Mini Card Socket. The th HSE PCIe x link is wired to the on-board SE90 SATA controller (in use for either msata and/or M. SATA SSD modules). This requires the CPU carrier card HSE connector to be configured to PCIe x (and not PCIe x or x). Since this is done by soft-strapping (i.e. Flash memory) on the CPU card, the SCX-PCIE and SC/SC CPU card must be ordered as an complementary assembly. EKF -- ekf.com

19 ERNI Microspeed mm male connector for nominal height mm w. mating carrier card mm female connector (BB.mm) High Speed Expansion P-HSE CFG_ * b a CFG_ * _PCIE_TXP b a _PCIE_TXP _PCIE_TXN b a _PCIE_TXN b a b a s0 s _PCIE_RXN b a _PCIE_RXN _PCIE_RXP b a _PCIE_RXP b a EKF ekf.com.00mm Pitch High Speed Male Connector _PCIE_TXP b a _PCIE_TXP _PCIE_TXN b9 a9 _PCIE_TXN b0 a0 _PCIE_RXN b a _PCIE_RXN _PCIE_RXP b a _PCIE_RXP b a _USB_TXP b a _USB_P _USB_TXN b a _USB_N b a s b a s9 _USB_RXP b a _USB_P _USB_RXN b a _USB_N b9 a9 PCIE_CLK_P b0 a0 USB_OC# PCIE_CLK_N b a PLTRST# +VS ) b a +.VS ) +VS ) b a +.VS ) +VPS ) b a +.VA ) +VPS ) b a +VPS ) italic/grey pins are NC (shown for reference only) * CFG_ and CFG_ = open (0k PU on CPU carrier board) indicating that a PCIe x link is requested ) Power rail switched on in S0 state only ) Power rail switched on in S0-S state ) Power always on EKF -9- ekf.com

20 ERNI Microspeed mm male connector for nominal height mm w. mating carrier card mm female connector (BB.mm) High Speed Expansion P-HSE _PCIE_TXP b a _PCIE_TXP _PCIE_TXN b a _PCIE_TXN b a b a _PCIE_RXN b a _PCIE_RXN s0 s _PCIE_RXP b a _PCIE_RXP b a _PCIE_TXP b a _PCIE_TXP EKF ekf.com.00mm Pitch High Speed Male Connector _PCIE_TXN b a _PCIE_TXN b9 a9 _PCIE_RXN b0 a0 _PCIE_RXN _PCIE_RXP b a _PCIE_RXP b a DP_LANE_P b a DP_LANE0_P DP_LANE_N b a DP_LANE0_N b a DP_LANE_P b a DP_LANE_P s b a s9 DP_LANE_N b a DP_LANE_N b a DP_AUX_P b9 a9 PCIE_CLK_P DP_AUX_N b0 a0 PCIE_CLK_N DP_CFG b a DP_HPD b a SMB_SCL ) PLTRST# b a SMB_SDA ) +VPS ) b a +VPS ) +VPS ) b a +VPS ) italic/grey pins are NC (shown for reference only) PCIe can pre-configured x, x, x via soft-straps (Flash image CPU carrier card). For the SCX-PCIE PCIe x is mandatory. If misaligned, devices will not be present after system enumeration. ) Connection to SMBus, isolated after system reset ) Power rail switched on in S0-S state PCIe lane usage: = switch (backplane) =SATA 90 =Mini Card = switch (front I/O devices) EKF -0- ekf.com

21 CompactPCI Serial Backplane Connectors The SCX-PIE is provided with four high speed backplane connectors P, P, P, P, compliant with the CompactPCI Serial specification (pin mapping for system boards). The PCI Express lanes * to * and * are derived from the -line PCI Express switch and capable to transfer GT/s (PCIe Gen), for a maximum link width of x each. The PCI Express lanes * and * to * are derived from a smaller Gen PCI Express switch and capable to transfer GT/s, for a link width of x each. P CompactPCI Serial Peripheral Slot Backplane Connector Type A EKF Part # pos. x, mm Width P A B C D E F G H I J K L TX0+ ) TX0- ) RX0+ ) RX0- ) TX0+ ) TX0- ) RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- USB+ USB- RSV RSV SATA TX+ SATA TX- SATA RX+ SATA RX- USB TX+ USB TX- PWR BTN# ) USB RX+ USB RX- PWR_ FAIL# ) SATA SDI SATA SDO GA SATA SCL SATA SL GA IC SCL IC SDA PS_ ON# ) RST# PRST# ) WAKE_ IN# ) RSV SYS EN# +V +V STBY +V +V +V +V +V +V pin positions printed gray: not connected ) not used - 0R to - power supply permanently on ) not used - PU to.v_ic EKF -- ekf.com

22 P CompactPCI Serial Peripheral Slot Backplane Connector Type B EKF Part # pos. x, mm Width P A B C D E F G H I J K L IO IO USB+ USB- USB+ USB- USB+ USB- IO IO IO IO IO IO IO IO TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- pin positions printed gray: not connected EKF -- ekf.com

23 P CompactPCI Serial Peripheral Slot Backplane Connector Type B EKF Part # pos. x, mm Width P A B C D E F G H I J K L TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- pin positions printed gray: not connected EKF -- ekf.com

24 P CompactPCI Serial Peripheral Slot Backplane Connector Type C EKF Part # pos. x, mm Width P A B C D E F G H I J K L CLKE# CLK+ CLK- CLKE# CLK+ CLK- CLKE# CLK+ CLK- CLKE# CLK+ CLK- CLK+ CLK- CLKE# CLK+ CLK- CLKE# CLK+ CLK- CLKE# CLK+ CLK- CLKE# TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX0+ TX0- RX0+ RX0- TX00+ TX00- RX00+ RX00- TX0+ TX0- RX0+ RX0- pin positions printed gray: not connected EKF -- ekf.com

25 Ordering Information For popular SCX-PCIE SKUs please refer to Please note that the SCX-PCIE typically comes without M. or Mini Card modules populated, unless otherwise expressly ordered. Photos shown within this document and at other places may be equipped with M. and/or Mini Card modules just for application demonstration. If you need a turnkey solution e.g. with an M. NVMe storage module populated, please contact sales@ekf.com before ordering. Related Documents CompactPCI Serial Basics / Overview CompactPCI Serial CompactPCI Serial Home Recommended CPU Cards SC-CONCERTO SC-FESTIVAL Driver Software Intel I0 Networking Controller Texas Instruments TUSB0 xhci Driver EKF -- ekf.com

26 Beyond All Limits: EKF High Performance Embedded Industrial Computers Made in Germany boards. systems. solutions. EKF Elektronik GmbH Philipp-Reis-Str. (Haus ) Lilienthalstr. (Haus ) 90 HAMM Germany Phone +9 (0)/90-0 Fax +9 (0)/90-90 Internet sales@ekf.com