M a c intosh Cyr i l lic Lang u age Ki t. Installation and User s Manual Manuel d installation et d u t i l i s a t i o n

Transcription

1 apple M a c intosh Cyr i l lic Lang u age Ki t Installation and User s Manual Manuel d installation et d u t i l i s a t i o n

2 K Apple Coputer, Inc. This anual and the software described in it are copyrighted by Apple, with all rights reserved. Under the copyright laws, this anual or the software ay not be copied, in whole or in part, without the written consent of Apple, except in the noral use of the software or to ake a backup copy of the software. The sae proprietary and copyright notices ust be affixed to any peritted copies as were affixed to the original. This exception does not allow copies to be ade for others, whether or not sold, but all of the aterial purchased (with all backup copies) ay be sold, given, or loaned to another person. Under the law, copying includes translating into another language or forat. You ay use the software on any coputer owned by you, but extra copies cannot be ade for this purpose. The Apple logo is a tradeark of Apple Coputer, Inc., registered in the U.S. and other countries. Use of the keyboard Apple logo (Option-Shift-K) for coercial purposes without the prior written consent of Apple ay constitute tradeark infringeent and unfair copetition in violation of federal and state laws. Every effort has been ade to ensure that the inforation in this anual is accurate. Apple is not responsible for printing or clerical errors Apple Coputer, Inc. 1 Infinite Loop Cupertino, CA (408) Apple, the Apple logo, Macintosh, Power Macintosh, and QuickDraw are tradearks of Apple Coputer, Inc., registered in the U.S. and other countries. TrueType and WorldScript are tradearks of Apple Coputer, Inc. Adobe and PostScript are tradearks of Adobe Systes Incorporated, which ay be registered in certain jurisdictions. Ties is a registered tradeark of Linotype-Hell AG and/or its subsidiaries. Siultaneously published in the United States and Canada. Mention of third-party products is for inforational purposes only and constitutes neither an endorseent nor a recoendation. Apple assues no responsibility with regard to the perforance or use of these products.

3 Contents Chapter 1 Introduction A-1 About this anual A-1 About the Cyrillic Language Kit A-1 Requireents A-2 Chapter 2 Setting Up A-3 Installing the Cyrillic Language Kit fro the copact disc A-3 Installing the Cyrillic Language Kit fro floppy disks A-3 Displaying Cyrillic filenaes correctly A-5 Installing SipleText Bulgarian, Russian, or Ukrainian A-6 Reoving the Cyrillic Language Kit fro your syste A-6 Chapter 3 Choosing a Language for Your Application Progra A-9 The Cyrillic Language Register progra A-9 Registering your progra for Cyrillic A-9 Creating a Roan Language Register A-10 Chapter 4 Working in Multiple Languages A-11 What are scripts? A-11 Priary and secondary scripts A-12 Choosing a keyboard layout A-12 The Cyrillic Language Kit keyboard layouts A-12 About the Cyrillic transliterated keyboard layouts A-13 The Bulgarian keyboard layout A-13 The Russian keyboard layout A-14 The Ukrainian keyboard layout A-14 The Cyrillic-QWERTY transliterated keyboard layout A-15 The Cyrillique-AZERTY transliterated keyboard layout A-16 The Kyrillisch-QWERTZ transliterated keyboard layout A-17 Transliteration guidelines A-18 The Keyboard control panel A-20 The Text control panel A-20 The Cyrillic characters encoding table A-22 Chapter 5 Troubleshooting A-23 A-iii

4 Chapter 1 Introduction About this anual This anual explains how to install your Cyrillic Language Kit. You will also learn how to designate which of your application progras should be opened in Russian (or another language using Cyrillic characters), and how to use the new control panels and enus that the language kit adds to your syste software. Here is how to use this anual: 1. Decide which parts of the Cyrillic Language Kit you want to install. Follow the instructions in Chapter 2 of this anual to install the Cyrillic Language Kit for Bulgarian, Russian, or Ukrainian. 2. Display Cyrillic filenaes and folder naes correctly. Follow the instructions in Chapter 2 to adjust the Views control panel so that you can read Cyrillic filenaes. 3. Display Cyrillic enus correctly in your Russian (or other language) application progras. Most application progras display enus correctly after you install the Cyrillic Language Kit. Follow the instructions in Chapter 3 of this anual to designate Cyrillic as the script for your Bulgarian, Russian, or Ukrainian progra. 4. To find out ore about the Cyrillic language support you have installed, read Chapter 4 of this anual. Chapter 4 explains how to use the new Keyboards enu, and how to set your Text and Keyboard control panels to custoize your coputer s Cyrillic capabilities. It also displays the keyboard layouts provided with the language kit. About the Cyrillic Language Kit The Cyrillic Language Kit contains all the software you need to work in Bulgarian, Russian, Ukrainian, or other languages using Cyrillic characters on your coputer. You can use your coputer s Cyrillic capabilities in two ways: If you have a Macintosh application progra that has been localized for use in Russian or other Cyrillic-script languages, the enus, dialog boxes, help essages, and other eleents will be displayed in that language. A-1

5 You can enter English and Cyrillic-script languages in a single docuent, using alost any Cyrillic or non-cyrillic application progra. The Cyrillic Language Kit includes: Syste software resources needed for Cyrillic-script languages. Three Cyrillic TrueType and PostScript fonts: APC Courier, Bastion, and Latinski Three Cyrillic bitap fonts: Pryaoy, Pryaoy Prop, Systeny The Cyrillic Language Register, a progra that lets you specify which of your application progras should be opened with Cyrillic-script enus. Progras registered for Russian will display enus and dialog boxes in the Cyrillic writing syste. Key caps labels representing Bulgarian, Russian, and Ukrainian keyboard layouts that can be applied to your keyboard. A choice of keyboard layouts including the standard Bulgarian, Russian, and Ukrainian layouts, as well as phonetically transcribed keyboard layouts for the standard QWERTY (English), AZERTY (French), and QWERTZ (Geran) keyboard layouts. SipleText Bulgarian, Russian, and Ukrainian. Requireents The Cyrillic Language Kit runs on any Macintosh coputer equipped with the following: Macintosh syste software version 7.1 or later. At least 4 egabytes of RAM (8 egabytes if you are using Macintosh Syste 7.5 with QuickDraw GX installed). On a Power Macintosh at least 8 egabytes of RAM (16 egabytes if you are using Syste 7.5 with QuickDraw GX installed). An internal or external hard disk drive. A floppy disk drive capable of reading high-density (1.4-egabyte) floppy disks, or a CD-ROM drive. A-2 Chapter 1: Introduction

6 Chapter 2 Setting Up Before you can use the Cyrillic Language Kit you ust install the software. You ay also want to consider setting your Views control panel to display Cyrillic file and folder naes correctly on your screen. Installing the Cyrillic Language Kit fro the copact disc If your coputer has a CD-ROM drive, you can install the Cyrillic Language Kit fro the Macintosh Cyrillic Language Kit CD disc that cae with your kit. To use the CD-ROM for installation, follow the instructions in the next section of this anual, Installing the Cyrillic Language Kit fro Floppy Disks. The procedure is the sae, but you won t have to swap disks. Everything you need is contained on the CD-ROM disc. Installing the Cyrillic Language Kit fro floppy disks The installation process autoatically akes a backup copy of your Syste Folder (to protect the contents during installation of the Cyrillic Language Kit). The backup copy uses approxiately 3 egabytes of space on your hard disk. This space is ade available to you again after installation is copleted. Your Cyrillic Language Kit includes four disks. You will need three of these disks for English installation, Install 1, English, Install 2, and Install 3. Have these disks ready before you begin. The Installer provides you with four installation choices: Bulgarian installation (includes the Bulgarian keyboard layout, the Cyrillic-QWERTY transliterated keyboard layout, and six Cyrillic fonts). Russian installation (includes the Russian keyboard layout, the Cyrillic-QWERTY transliterated keyboard layout, and six Cyrillic fonts). Ukrainian installation (includes the Ukrainian keyboard layout, the Cyrillic-QWERTY transliterated keyboard layout, and six Cyrillic fonts). Optional ites, including Cyrillic PostScript fonts, and additional keyboard layout choices. v Note: To find out ore about the keyboard layouts included in your Cyrillic Language Kit, read Chapter 4 of this anual. v A-3

7 Unless you ve already installed Bulgarian, Russian, or Ukrainian language support, you should install at least one of these choices. You can choose as any of the optional installation ites as you want. 1. Quit any open application progras. If you have any virus-detection software, turn it off. v Note: It s best to start your coputer with all extensions turned off before doing the installation. To do so, hold the Shift key down while your coputer is starting. v 2. Insert the Install 1, English disk into your floppy disk drive (or insert the Macintosh Cyrillic Language Kit CD disc into your CD-ROM drive). You should see the Installer icon in the Install 1, English disk s window. 3. Open the Installer by double-clicking its icon. A welcoe screen appears. 4. Click Continue. The Custo Install dialog box appears. 5. Make sure that the hard disk naed is the one where you want to install Cyrillic. If a different disk nae appears, click the Switch Disk button until you see the nae of the correct disk. 6. Click the ites you want to install to select the. Click the checkbox of each ite you want to install. 7. Click Install. Make sure this is the nae of the disk where you want to install the language kit. Click here to switch to a different disk for installation. Messages tell you when you need to insert another disk. It takes a few inutes to coplete the installation. 8. If you see a essage telling you to restart your coputer, choose Restart. v Note: If you installed on a disk different fro your startup disk, you will first be asked to quit the Installer application. You ust designate the hard disk where you installed the Cyrillic Language Kit as your startup disk, then restart your coputer to activate Cyrillic language support. v Your coputer now supports the Cyrillic writing syste. Click here to install the Cyrillic Language Kit. A-4 Chapter 2: Setting Up

8 Displaying Cyrillic filenaes correctly If you have files and folders with Cyrillic naes on your coputer, you ay find that your syste can t correctly display these Cyrillic naes. This can happen if the font your syste currently uses for file and folder naes is not appropriate for Cyrillic. For exaple, any people use the Geneva font for file and folder naes, but Geneva contains only characters for English and other languages that use the Roan character set (such as French, Spanish, and Geran). The Latinski font installed with the Cyrillic Language Kit contains Cyrillic characters as well as the ost coonly used Roan characters. You can view Cyrillic file and folder naes correctly by setting the Views control panel to Latinski. Follow these steps to set the Views control panel: 1. Choose Control Panels fro the Apple (K) enu. 2. Open the Views control panel. 3. Press the Font for views pop-up enu. 4. Choose Latinski (or any other Cyrillic font you prefer). 5. Close the Views control panel. Choose Latinski. Most Cyrillic application progras display Cyrillic correctly after you install the Cyrillic Language Kit. If you have an application progra that does not display the enus correctly, follow the instructions in Chapter 3 to designate Cyrillic as the script for your Cyrillic progra. v Note: If your coputer s priary language uses the Roan character set, but is not English, specifying a Cyrillic font in the Views control panel ay cause soe difficulties in reading file and folder naes that use Roan characters. This is because the Cyrillic fonts do not contain ulauts, accents, and soe other non-english Roan characters and sybols. v If you have ore than one language kit installed, you ay want to continue using the Geneva font, since a Cyrillic font will not contain the characters for other language kits. Chapter 2: Setting Up A-5

9 Installing SipleText Bulgarian, Russian, or Ukrainian SipleText is a basic ultilingual text-editing progra that supports Cyrillic characters, as well as all other available writing systes. This progra is not autoatically installed with your language kit. If you wish to install it, follow these steps: 1. Do one of the following: If you have a CD-ROM drive, insert the CD Install disc into the CD-ROM drive. Otherwise, insert the Install 1, English disk into your floppy drive. 2. When the floppy disk or CD-ROM disc icon appears on the screen, double-click it to open it. 3. Locate the SipleText Cyrillic folder. If you don t see the SipleText Cyrillic folder in the window, resize the window to ake it larger, or scroll the window to see ore. 4. Double-click the SipleText Cyrillic folder to open it. 5. Drag the preferred SipleText Cyrillic icon to your hard disk. If you have ore than one version of SipleText on your coputer for instance, SipleText Ukrainian and an English version the wrong version ay start when you try to open a SipleText file. Instead of opening a SipleText file directly, first open the version of SipleText you want to use, then choose Open fro the File enu to open your file. v Note: Your existing version of SipleText will also support Cyrillic text entry. SipleText Cyrillic is not required to use the Cyrillic Language Kit. v Reoving the Cyrillic Language Kit fro your syste If you wish to reove the Cyrillic Language Kit fro your syste, use the Installer to reove all the files that provide Cyrillic language support. If you have other language kits on your syste, don t worry. The Installer will not reove any support needed for your other languages. To reove Cyrillic language support you need the Install 1, English disk. A-6 Chapter 2: Setting Up

10 1. Quit any open application progras. If you have any virus-detection software, turn it off. v Note: It s best to start your coputer with all extensions turned off before doing the reoval. To do so, hold the Shift key down while your coputer is starting. v 2. Insert the Install 1, English disk into your floppy drive (or insert the Macintosh Cyrillic Language Kit CD disc into your CD-ROM drive). You should see the Installer icon in the Install 1, English disk s window. 7. Click to select the ites you want to reove. 8. Click Reove. There is a short wait while the files are reoved. 9. If you see a essage telling you to restart your coputer, click Restart. The Cyrillic Language Kit is not reoved until you restart your coputer. v Note: If your language kit was installed on a disk different fro your startup disk, you will only be asked to quit the Installer application. v Click the checkbox of the ites you want to reove. Press this pop-up enu and choose Custo Reove. 3. Open the Installer by double-clicking its icon. A welcoe screen appears. 4. Click Continue. The Install dialog box appears. 5. Press the pop-up enu at the upper-left corner of the dialog box and choose Custo Reove. 6. Make sure that the disk naed is the one fro which you want to reove your Cyrillic language software. If the wrong disk nae appears, click Switch Disk until you see the nae of the correct disk. Make sure this is the nae of the disk where the language kit is installed. Click here to switch to a different disk. Click here to reove the selected files. Chapter 2: Setting Up A-7

11 A-8

12 Chapter 3 Choosing a Language for Your Application Progra Now that your coputer can work in ore than one language, it ust have a way to deterine which progras ust be opened with the Cyrillic script. The Cyrillic Language Register progra Application progras contain a region code that tells your syste which language and font should be used for enus, dialog boxes, help balloons, and other ites. Soe progras, however, contain region codes that don t specify the preferred language. Suppose you open a Russian progra whose region code does not specify Cyrillic. With your Cyrillic Language Kit you can work in the progra, but you won t be able to read the enus, dialog boxes, and help balloons. To reedy this proble, a Cyrillic Language Register progra is supplied with your Cyrillic Language Kit. You can use the Language Register to register the progras you want to use in Cyrillic. You ay not need to register all your Cyrillic-based progras only those in which enus don t appear with the correct characters. Registering your progra for Cyrillic You need only register a progra once. After it is registered, a progra always opens in the language you specified, unless you reinstall it or re-register it in a different language. To register a progra: 1. Open the Cyrillic Language Register. Double-click here to open the Cyrillic Language Register. You ll find the Cyrillic Language Register in the Apple Extras folder on the hard disk where you installed the kit. 2. Click the Register Application button. A list of application progras and folders appears. Select Russian for all Cyrillic-based applications. Click Register Application. A-9

13 3. Select the application progra you want to register. Click the progra you want to register. 4. Click the Register button. Now you can open your progra and begin working. If the progra you want to register is not listed, use this enu to see files in other folders. v Tip: You can use a short-cut ethod to register your progras. If the progra you want to register is open, quit it. Then drag the progra s icon to the icon for the Cyrillic Language Register. When the Language Register icon is highlighted, release the ouse button. A essage confirs that the progra is registered. v Creating a Roan Language Register If you register a progra for Cyrillic by accident, you can change it back to your coputer s priary language by following these steps: 1. Open the Cyrillic Language Register. 2. Pull down the Language enu. 3. Choose English. 4. Click OK. Your Cyrillic Language Register changes to a Roan Language Register. You can now use it to re-register progras as Roan. v Hint: As a convenience, you can create additional language registers for any of the languages installed on your syste, then use the short-cut ethod described at left to register your progras. v A-10 Chapter 3: Choosing a Language for Your Application Progra

14 Chapter 4 Working in Multiple Languages Now that you have installed the Cyrillic Language Kit, your syste supports at least two languages: your priary language and a Cyrillic-script language. When you add another language to your coputer, you have new choices about how text should appear on your desktop and in docuents. The ore languages your coputer supports, the ore choices you have. This chapter explains choosing a keyboard layout fro the Keyboards enu, and setting the Keyboard and Text control panels to tailor how your coputer displays text. It also provides inforation about the different keyboard layouts provided with your Cyrillic Language Kit. What are scripts? Your Macintosh supports ultiple languages and their writing systes through software known as a script syste. A script syste tells your coputer what characters the script contains, and which keystrokes produce the. The script syste also specifies the direction of text flow (left to right or right to left), and other inforation such as sort order and date, tie, nuber, and currency forats. For instance, if you are working in English, your syste uses the Roan script. The Roan character set is available, and text flows fro left to right. If you are working in Bulgarian, Russian, or Ukrainian, your syste uses the Cyrillic script. The Cyrillic character set is available, and text also flows fro left to right. The sae script can be used by several languages if they share ost of the sae characters. For exaple, Roan script is used for English, French, Italian, Geran, and Spanish. Exaples of Macintosh scripts and corresponding languages Roan Cyrillic Hebrew Japanese Traditional Chinese Siplified Chinese Korean Arabic English, French, Geran, Italian, Spanish Russian, Ukrainian, Bulgarian, Serbian, Macedonian, Belorussian Hebrew, Yiddish Japanese Traditional Chinese Siplified Chinese Korean Arabic, Persian A-11

15 Priary and secondary scripts The script used by your syste software the language in the enus, dialog boxes, and other ites on the screen is your coputer s priary script. If you install a language kit that uses a different script, that script becoes a secondary script for your syste. For exaple, if your syste is English, and you install the Cyrillic Language Kit, your syste s priary script is Roan, and its secondary script is Cyrillic. Choosing a keyboard layout In the upper-right of your screen, you ll see a Keyboards enu in the enu bar. The Keyboards enu is available on any syste with ore than one language installed. If you work in two languages, you can switch fro one language to another by choosing the appropriate keyboard layout fro the Keyboards enu. For exaple, you can type a docuent in Cyrillic that includes passages in English, all using the correct fonts and characters. To choose a keyboard layout while working in an application progra, you can do one of the following: Pull down the Keyboards enu and choose the keyboard layout you want to use. You can now type in the language corresponding to the layout you selected. If you know what s listed in the Keyboards enu, press x Space Bar to switch to the next section of the list without opening the enu. Press x Option Space Bar to switch to the next choice within the sae section. You ay also need to change keyboard layouts while working on the desktop. If you want to edit a Cyrillic file or folder nae, you first need to select a Cyrillic keyboard font in the Views control panel (see Chapter 2). The Cyrillic Language Kit keyboard layouts The Cyrillic Language Kit offers six different keyboard layouts: the Bulgarian keyboard layout the Russian keyboard layout the Ukrainian keyboard layout the Cyrillic-QWERTY (English) transliterated keyboard layout the Cyrillique-AZERTY (French) transliterated keyboard layout the Kyrillisch-QWERTZ (Geran) transliterated keyboard layout A-12 Chapter 4: Working in Multiple Languages

16 About the Cyrillic transliterated keyboard layouts You should use the standard Bulgarian, Russian, or Ukrainian keyboard layout if you are already failiar with this layout. Otherwise, you ay want to choose one of the transliterated keyboard layouts. The transliterated keyboard layouts phonetically ap the Cyrillic characters to the standard QWERTY (English), AZERTY (French), or QWERTZ (Geran) keyboard layout. The following illustrations depict the six keyboard layouts provided with the Cyrillic Language Kit. Three sets of keycaps labels are delivered with each Cyrillic Language Kit, for the Bulgarian, Russian, and Ukrainian keyboard layouts. The Bulgarian keyboard layout The Bulgarian keyboard lets you type all Cyrillic characters in Noral and Shift positions. Noral Shift Option Chapter 4: Working in Multiple Languages A-13

17 The Russian keyboard layout The Russian keyboard lets you type all Cyrillic characters in Noral and Shift positions. Noral The Ukrainian keyboard layout The Ukrainian keyboard lets you type all Cyrillic characters in Noral and Shift positions. Noral Shift Shift Option Option A-14 Chapter 4: Working in Multiple Languages

18 The Cyrillic-QWERTY transliterated keyboard layout This keyboard layout displays Cyrillic characters on a QWERTY (English) keyboard in the sae position as the corresponding Roan characters with siilar pronunciation. It is recoended for people who are not failiar with Cyrillic keyboard layouts. Pressing the Option key gives access to additional characters used in Ukrainian, Belorussian, Serbian, and Macedonian. Option Option + Shift Noral Shift Chapter 4: Working in Multiple Languages A-15

19 The Cyrillique-AZERTY transliterated keyboard layout This keyboard layout displays Cyrillic characters on an AZERTY (French) keyboard in the sae position as the corresponding Roan characters with siilar pronunciation. It is recoended for people who are not failiar with the Cyrillic keyboard layouts. Pressing the Option key gives access to additional characters used in Ukrainian, Belorussian, Serbian, and Macedonian. Option Option + Shift Noral Shift A-16 Chapter 4: Working in Multiple Languages

20 The Kyrillisch-QWERTZ transliterated keyboard layout This keyboard layout displays Cyrillic characters on a QWERTZ (Geran) keyboard in the sae position as the corresponding Roan characters with siilar pronunciation. It is recoended for people who are not failiar with the Cyrillic keyboard layouts. Pressing the Option key gives access to additional characters used in Ukrainian, Belorussian, Serbian, and Macedonian. Option Option + Shift Noral Shift Chapter 4: Working in Multiple Languages A-17

21 Transliteration guidelines The following charts list the naes of all the letters of the Cyrillic alphabet. The transliteration tells you which keys to press for a specific Cyrillic character. Use these charts in addition to the larger chart on the next page. A-18 Chapter 4: Working in Multiple Languages

22 Chapter 4: Working in Multiple Languages A-19

23 The Keyboard control panel Use the Keyboard control panel to choose which keyboard layout is the default the one autoatically selected in your Keyboards enu for each script on your syste. The keyboard layouts displayed in the Keyboard control panel correspond to the script and language currently selected in your Keyboards enu. For instance, if the U.S. keyboard is currently selected in your Keyboards enu, the Keyboard control panel lists all the keyboard layouts available for the Roan script. If you want to set the default keyboard layout for the Cyrillic script, choose a Cyrillic keyboard in the Keyboards enu, and then follow the instructions given here. To set the default Cyrillic keyboard layout: 1. Choose Control Panels in the Apple (K) enu. 2. Open the Keyboard control panel. The current default keyboard is selected. 3. Select a new default keyboard layout. The Text control panel As explained at the beginning of this chapter, the sae script can be used by ore than one language. Two languages that share the sae script ay have different rules for such things as sorting order or capitalization. When ore than one set of rules exists for the script you are using, you can use the Text control panel to specify which rules you want to apply. For your priary script, the rules also deterine how file and folder naes are sorted on your desktop. Russian rules selected. v Note: The selection shown in the Script box is Russian, and refers to your choice of Cyrillic script. Bulgarian, Russian, or Ukrainian behavior can be selected fro the Behavior pop-up enu. v 4. Close the Keyboard control panel. Choose a default keyboard layout fro this list. A-20 Chapter 4: Working in Multiple Languages

24 The Cyrillic characters encoding table The character encoding table used in the Cyrillic Language Kit is shown on the right. Colun rank represents the first code digit, and row rank represents the second code digit. Rank starts fro 0. For exaple, letter b is in the colun 6. and the row.2, so its hexadecial code is $ A. B. C. D. E. F..0 Null Sp P ` p Ä ê.1! 1 A Q a q Å ë ± Ò.2 " 2 B R b r Ç í Ú.3 # 3 C S c s É ì Û.4 $ 4 D T d t Ñ î ƒ Ù.5 % 5 E U e u Ö ï µ  ı.6 & 6 F V f v Ü ñ Ê ˆ.7 ' 7 G W g w á ó ß «Á.8 ( 8 H X h x à» ÿ Ë.9 Tab ) 9 I Y i y â ô π Ÿ È.A * : J Z j z ä ö Nbs Í.B + ; K [ k { ã õ ª À Î.C, < L \ l å ú º à Ï.D CR - = M ] } ç ù Ω Õ Ì.E. > N ^ n ~ é û Æ æ Œ fi Ó.F /? O _ o Del è ü Ø ø œ fl Ô ˇ Chapter 4: Working in Multiple Languages A-21

25 A-22

26 Chapter 5 Troubleshooting This section contains inforation about soe coon probles you ay encounter while working on a coputer that supports Cyrillic. I see odd characters that I can t read in soe of y file and folder naes. The font your syste is using for file and folder naes ay not contain any Cyrillic characters. Cyrillic naes can t be properly displayed unless your syste uses a font that contains Cyrillic characters. Choose Latinski in your Views control panel (see the section Displaying Cyrillic Filenaes Correctly in Chapter 2). The Latinski font contains Cyrillic characters as well as the ost coonly used Roan characters. You can usually view Cyrillic and Roan file and folder naes correctly by setting the Font for views to Latinski. If you still see odd characters on your screen, read on. I changed y Views control panel to the Latinski font, but I still see odd characters in y Cyrillic application progra. Your syste ay not recognize your Cyrillic progra as Cyrillic. Follow the instructions in Chapter 3 of this anual to register your progra as Cyrillic. I changed y Views control panel to the Latinski font, and now I can t read soe of y non-cyrillic file and folder naes. If you have file or folder naes that contain non-english Roan characters, such as accents or ulauts, they will not be correctly displayed after you change the Views control panel to the Latinski font. A few other characters, such as typographic quotation arks and ellipses, also will not be correctly displayed. This is because the Latinski font does not have a coplete set of Roan characters, only the ost coonly used ones. In the Views control panel, choose a font that will correctly display your non-cyrillic file and folder naes. Then use non- Cyrillic naes for all your files and folders, even those that contain Cyrillic. A-23

27 Setting the Views control panel to Latinski is necessary only to read Cyrillic file and folder naes. If you don t set the Views control panel, you will still see Cyrillic correctly displayed within your application progras. You can write and print in Cyrillic; reeber to give your files non-cyrillic naes. I changed y Views control panel to the Latinski font, but I still see odd characters in y Application enu. Not all the probles of working in ultiple languages on one coputer have been solved. Unfortunately, the Application enu cannot display Cyrillic naes, even after you set your Views control panel to a Cyrillic font. The naes of your Cyrillic application progras will not be correctly displayed in the Application enu and in certain dialog boxes. Icons appearing in the Application enu next to each progra s nae will help you to identify your Cyrillic progras. I can t edit a Cyrillic file or folder nae. You ay have a non-cyrillic keyboard selected in the Keyboards enu. Pull down the Keyboards enu and select a Cyrillic keyboard. For ore inforation on the Keyboards enu, see Chapter 4. I reinstalled one of y Cyrillic application progras. Do I need to re-register it in Cyrillic? If the nae of your progra changes, you ust re-register it. See Chapter 4 for instructions on registering a progra in Cyrillic. I can t work in Cyrillic with y usual application progra. Your application progra ay not be copletely copatible with other scripts. If it isn t, it won t autoatically switch to a Cyrillic font when you select a Cyrillic keyboard, or it ay not let you see all the Cyrillic fonts in the font enu. Since I installed the Cyrillic Language Kit, unwanted keyboard layouts appear in y Keyboards enu. How do I reove the? To reove unnecessary keyboard layouts, open the Syste file in the Syste folder. Select the unnecessary keyboard layouts and drag the to the Trash or into a teporary folder. Since I installed the Cyrillic Language Kit, I can no longer work with soe of y other application progras, even in Roan. This ay be caused by a lack of eory. The Cyrillic Language Kit, when installed, is autoatically loaded in eory at startup along with syste software. Your syste software takes up ore space in eory, and the aount of eory available for progras decreases. A-24 Chapter 5: Troubleshooting

28 apple Apple Coputer, Inc. 1 Infinite Loop Cupertino, California (408) A Printed in U.S.A.