How to prepare your Vu-Tec Analogue HD (AHD) DVR for sending messages in association to motion detection?

Size: px

Start display at page:

Download "How to prepare your Vu-Tec Analogue HD (AHD) DVR for sending messages in association to motion detection?"

Geraldine Hancock
5 years ago
Views:

How to prepare your Vu-Tec Analogue HD (AHD) DVR for sending Email messages in

This manual is for 2MPix kits from our store: Default login details (DVR): Login: admin

com Working environment: - DVR must be connected to the Internet.

- Email address required to set the DVR as messages Sender. Go to Step 1.

1 How to prepare your Vu-Tec Analogue HD (AHD) DVR for sending messages in association to motion detection? This manual is for 2MPix kits from our store: Default login details (DVR): Login: admin Password: (leave this blank) For more details please visit: Working environment: - DVR must be connected to the Internet. When it is connected properly the LED s beside LAN slot (back of device) are blinking. - address required to set the DVR as messages Sender. Go to Step 1. Steps 2 take (click to follow): 1. Create new Gmail account (for sender- your DVR). 2. Log into DVR menu 3. Set Motion Detection for Channels. 4. Configuration of Settings. 5. Allow DVR to use Google SMTP.

1. Create new Gmail account for sender- your DVR. The way described below- highly recommended by our specialists- is to create new account on gmail.com platform.

This new created Email address will be used as your DVR s Email address. *Notice: Write down your new created Account details.

2 1. Create new Gmail account for sender- your DVR. The way described below- highly recommended by our specialists- is to create new account on gmail.com platform. Click this link to create an account now. Fill the Create your Google Account form as shown on our example WITH YOUR OWN DETAILS. This new created address will be used as your DVR s address. *Notice: Write down your new created Account details. You will need those info soon to set the DVR (section: Configuration of Settings) properly. While your new address will be active go to your DVR settings. 2. To set anything in your DVR- you must to be logged in. For log in: 1. Right click anywhere (to see the context menu): 2. Go to: Start> Login 3. Enter your login details. Default settings: User: admin Password: (no password, leave this spot empty) 4. Click on Login

1)Click in Enable Motion Detection checkbox 2)Set motion areas, as shown in the below picture: 3)Adjust

3 3. How to set Motion detection for channels From context menu select: Setting: 1. Go to Channel> Motion: 2. M o d i f y e a c h v i d e o channel parameters on the Motion interface, as shown on the picture above: 1)Click in Enable Motion Detection checkbox 2)Set motion areas, as shown in the below picture: 3)Adjust sensitivity volume (recommended value: position 4-5) 4)Set arm schedule (in most situations you should leave this on default value)

5)Select linkage, as shown in the below picture: In our example we want to set Email Linkage so make sure that

4 5)Select linkage, as shown in the below picture: In our example we want to set Linkage so make sure that this checkbox is selected. Done You ve just set motion detection. Go to next step: Configuration of settings

4. Configuration of Email Settings. From context menu select: Setting: 1. Go to Network> Email Setting 2. Type your own details. Here is our example: 2.1. Email Address: yourdvraddress@gmail.

5 4. Configuration of Settings. From context menu select: Setting: 1. Go to Network> Setting 2. Type your own details. Here is our example: Address: enter the address of the DVR. The way to create this was described here Password/ Pwd Confirm: enter the password of account 2.3. Click in SSL checkbox (required) and in Attachment checkbox (DVR will send screenshot when the cameras will detect movement) Reciever 1,2,3: enter your own addresses here Sending interval: 25s 2.6. SMTP Server (required): smtp.gmail.com 2.7. SMTP Port (required): Click on NOW YOUR CONFIGURATION IS READY.

5. Allow DVR to use Google SMTP Protocol. 1. Go to your new created Email account. You should receive a message from the google system: 2.

6 5. Allow DVR to use Google SMTP Protocol. 1. Go to your new created account. You should receive a message from the google system: 2. Open this message and click on ALLOW ACCESS: 3. Turn on: Access for less secure apps: WELL DONE! From now you will receive messages from your CCTV system in relation to motion detection.

7 If you have any trouble with configuration, don t hesitate to contact with our: - After Sales Technical or call us: Phone:

1. NVR Connection Diagram Wizard Setup Access System Using Mobile Device Access System Using PC Client Software 5

1. NVR Connection Diagram Wizard Setup Access System Using Mobile Device Access System Using PC Client Software 5 1 1. NVR Connection Diagram 2 2. Wizard Setup 3 3. Access System Using Mobile Device 4 4. Access System Using PC Client Software 5 5. Access System Using Internet Explorer 8 6. Recording Setup 9 Motion