Misoperations Information Data Analysis System (MIDAS)

Transcription

1 Misoperations Information Data Analysis System (MIDAS) End User Guide June 2016 NERC Report Title Report Date I

2 Table of Contents Preface... iii Chapter 1 Reporting Obligations...1 Entities Obligated to Report Misoperations...1 Chapter 2 Reporting Misoperations and Protection System Operations...2 Using the Submission Site...2 Submission...2 Resubmittal...3 Chapter 3 Notifications...4 Submission Confirmation Records Processed Reminder s...4 Appendix A List of Validations...5 Misoperations...5 Required and non-required fields...5 Additional Validation requirements...5 Protection System Operations...6 Required and Not Required fields...6 Additional Validation Requirements...6 ii

3 Preface The North American Electric Reliability Corporation (NERC) is a not-for-profit international regulatory authority whose mission is to assure the reliability of the bulk power system (BPS) in North America. NERC develops and enforces Reliability Standards; annually assesses seasonal and long term reliability; monitors the BPS through system awareness; and educates, trains, and certifies industry personnel. NERC s area of responsibility spans the continental United States, Canada, and the northern portion of Baja California in Mexico. NERC is the electric reliability organization (ERO) for North America, subject to oversight by the Federal Energy Regulatory Commission (FERC) and governmental authorities in Canada. NERC s jurisdiction includes users, owners, and operators of the BPS, which serves more than 334 million people. The North American BPS is divided into several assessment areas within the eight Regional Entity (RE) boundaries, as shown in the map and corresponding table below. The Regional boundaries in this map are approximate. The highlighted area between SPP and SERC denotes overlap as some load-serving entities participate in one Region while associated transmission owners/operators participate in another. FRCC MRO NPCC RF SERC SPP RE Texas RE WECC Florida Reliability Coordinating Council Midwest Reliability Organization Northeast Power Coordinating Council ReliabilityFirst SERC Reliability Corporation Southwest Power Pool Regional Entity Texas Reliability Entity Western Electricity Coordinating Council iii

4 Chapter 1 Reporting Obligations Entities Obligated to Report Misoperations All entities that are registered with NERC for the following functions are obligated to report misoperations every quarter: Transmission Owners (TOs), Generator Owners (GOs), and Distribution Providers (DPs). 1

5 Chapter 2 Reporting Misoperations and Protection System Operations Using the Submission Site Submission Navigate to the Misoperation Data Submission Form site ( ): Fill out the required fields, starting with the Type NCR Number. As a user starts typing in an NERC Compliance Registry (NCR) number, a list will automatically start populating with all entities that match the characters typed in the field. Those characters don t have to be at the beginning of the NCR (e.g., typing in 401 will return NCR11401). Once the entity has been chosen, the Lead Region field will be populated with all Regions for which the entity is registered as a TO, DP, or GO. Questions regarding whether there are protection system operations and/or misoperations for each Region will also appear. These must be filled out before the record can be submitted. Clicking on submit will complete the process of submission. 2

6 Note the following: Chapter 2 Reporting Misoperations and Protection System Operations Users cannot choose a future quarter or year. The key code is sent to registered entities through an alternative path (e.g., ) and should be entered into the field exactly. A misoperations file must be uploaded if yes is answered for any Region for either question, Do you have [misoperations/protection system operations] to report for the following Regions? The misoperations file must be an.xlsx file and use the NERC-approved format. Resubmittal If you are resubmitting data, select the Resubmittal Only button. This will prevent questions regarding whether there are misoperations or protection system operations to report from appearing. A resubmittal enables record updates. Apply the updates to the appropriate misoperation ID. 3

7 Chapter 3 Notifications Submission Confirmation Once a record has submitted, an notification will be sent to the following: The address supplied on the submission form All contacts associated to the submitting NCR who are subscribed to receiving MIDAS notifications. Please contact your Regional representative to subscribe or unsubscribe from receiving notifications. Records Processed A submission is processed when it is received, which entails validating all entries in the spreadsheet and then writing them to the database. Users will receive notification that the submission has been processed with one of the following statuses: Processed Successfully This status indicates that all records in the spreadsheet were processed. Processed with Some Failed Records This status indicates that some records were processed and some were not. For records that were not processed successfully, a file for each record type (PS operation and misoperations) is created that describes the error encountered during processing. These files are attached to the . Reminder s If a qualified entity does not report for a particular quarter, reminders will be sent out periodically. 4

8 Appendix A List of Validations Misoperations Required and non-required fields *Indicates conditionally required (see additional validations below) Required Not required Misoperation ID Fault Type Region Where Misoperation Occurred Restoration Method NERC Compliance Registry Number Incorrect Settings et. al. Sub-Cause Code Jurisdiction Communication Sub Cause Misoperation Date Communication System Type Misoperation Time Protection System Schemes Time Zone Protection Systems/Components that Misoperated Faculty Name Relay Technology Equipment Name Microprocessor Relay Manufacturer Equipment Type TADS Elements Faculty Voltage GADS Elements Equipment Removed from Service Corrective Action Plan Event Description CAP Target Completion Date* Misoperation Category CAP Actual Completion Date* Cause(s) of Misoperation Additional Contact Name Is this a TADS reportable event? Additional Contact s Phone Number Is this a GADS reportable event? Additional Contact s Address Analysis and Corrective Action Status Comments Reported By Reported By Phone Reported By Date Reported Additional Validation requirements A spreadsheet cannot contain duplicate misoperation IDs addresses must be a valid format All dates and times must be a valid date format If Is this a GADS Reportable Event equals yes, then GADS elements cannot be blank If Is this a TADS Reportable Event equals yes, then TADS elements cannot be blank If Cause(s) of Misoperation equals any of the following, then components and relay technology fields cannot be blank: Relay failures/malfunctions Incorrect settings Logic errors Design errors 5

9 Appendix A List of Validations If Analysis and Corrective Action Status equals Corrective Action Completed, then CAP Actual Completion Date cannot be blank If Analysis and Corrective Action Status equals Corrective Action In Progress, then CAP Target Completion Date cannot be blank Protection System Operations Required and Not Required fields *Indicates conditionally required (see additional validations below) Required Not required Date Reporting Year Date Reporting Quarter Region Entity NCR Total Number of Operations* Voltage Class Additional Validation Requirements Total Number of Operations cannot be blank. If there are no operations for a particular Region, 0 must be entered. 6