The Digital Calibration Certificate
|
|
- Loreen Flowers
- 5 years ago
- Views:
Transcription
1 The Digital Calibration Certificate Siegfried Hackel Digitalization in Metrology Calibration for Industry: Accredited calibration laboratories (DAkkS) Legal Metrology: 1
2 Calibration for Industry: Accredited calibration laboratories (DAkkS) In focus Calibrations per year X 100 X 10 ca X 10 national standard national standard accredited calibration lab reference standards in-company calibration lab use- or factory-normal test device of the company P R O D U C T The Digital Calibration Certificate Norms and Standards SI [1] VIM [2] GUM [3] CODATA [4] [5] [1] Le Système international d'unités/the International System of Units (Brochure sur le SI/SI brochure), 2006 [2] Brinkmann, B.: Internationales Wörterbuch der Metrologie. Grundlegende und allgemeine Begriffe und zugeordnete Benennungen (VIM); ISO/IEC-Leitfaden 99:2007 = Vocabulaire international de métrologie. Wissen: Messwesen. Berlin, Wien, Zürich: Beuth 2012 [3] Norm JCGM 104:2009; Juli Auswertung von Messdaten Eine Einführung zum "Leitfaden zur Angabe der Unsicherheit beim Messen" und zu den dazugehörigen Dokumenten (GUM) [4] Mohr, P. J., Newell, D. B. u. Taylor, B. N.: CODATA recommended values of the fundamental physical constants Reviews of Modern Physics 88 3, S. 337 [5] DIN EN ISO/IEC DIN EN ISO/IEC August Allgemeine Anforderungen an die Kompetenz von Prüf und Kalibrierlaboratorien 2
3 1.: Administrative Data regulated 2.: Results of the Calibration regulated: = ± ( ) [SI] not regulated: individual data 3.: Comments not regulated 4.: Document human readable Hierarchical Structure Norms and Standards XML as Exchange Format international accepted approved cryptographically signable SI VIM GUM CODATA Workflow MTD Metrological Terminology Directory Example: Pressure ID: UAD142 m -1 kg s -2 Start of calibration Data logging Analysing the data Transfer to XML Proceed as previously done 3
4 Transfer to XML Lab NMI Layout Machinereadable NMI Middleware Preprocessor Postprocessor Middleware Transfer To XML o. k. Review by head of lab Humanreadable All informations are now in XML 1.: Administrative Data regulated 2.: Results of the Calibration regulated: = ± ( ) [SI] not regulated: individual data Electronic Signature 3.: Comments not regulated 4.: Document human readable More than ten years in use: Civil register office ( Standesamt ) Waste management Purchasing development 4
5 Contacts in the surrounding of PTB PSt 1: Sascha Eichstädt PSt 2: Kai Stoll-Malke Division 2: Torsten Funck, Christian Schlegel, André Müller, Thorsten Schrader, Thomas Kleine-Ostmann, Karsten Kuhlmann Division 5: DCCW; Rene Schödel, Febo Menelao, Ingo Busch Division 7: Rolf Niepraschk Division 8: Metrology Cloud Division 9: DKD (Peter Ulbig, Michael Wolf, Martin Czaske), Harry Stolz Division Q: Joachim Meier, Giacomo Lanza, my dear old stuff Q.4, Division Z: Christoph Tampier, Z.18 Division 1: DAkkS: a very long list Heike Manke (Head of division) Calibration and Industry 4.0 Calibrations per year X 100 X 10 ca X 10 national standard national standard accredited calibration lab reference standards in-company calibration lab use- or factory-normal test device of the company P R O D U C T From: Implementation Strategy Industrie 4.0, Bitkom e. V., Jan _Report_on_the_results_of_Industrie_4.0_Platform/Implementation-Strategy-Industrie-40-ENG.pdf 5
6 Withdraw and link from digital calibration certificates / twins Problem?????? An analogous document can be withdrawn Example: driver license Retraction of cryptographically signed documents according to SigG, SigV and eidas is not intended Added value through the unique assignment of digital certificates to an object (eg measuring device) Withdraw and link from digital calibration certificates / twins Approach Establishment of a trust service maintaining a list of valid and withdrawn digital copies Analogy: OCSP-Request Comparison with Blockchain Construction of a chain of digital documents Idea: Merckle-Hashbaum Comparable to blockchain Legal evaluation Analogy: BeLab, AchiSig, 6
7 Validity of digital certificates in Germany, the EU and the world Digitalization is global therefore she knows no boundaries! SmartCom 7
8 Digitalization is global Planned daher kennt contacts sie keine and cooperations Grenzen! for 2018 SmartCom 04/ / /2018 Industry International Workshop Digital Calibration Certificate Where: PTB; Brunswick When: (Come together) Participants: NMI s; National accreditation agencies 8
9 /03/2018 Daten Zertifikat Physikalisch-Technische Bundesanstalt Braunschweig und Berlin Bundesallee Braunschweig Dir. u. Prof. Dr. Siegfried Hackel Telefon:
The appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Bundesnotarkammer Burgmauer 53 50667 Köln, Germany to confirm that its trust service BNotK qualifizierte
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Dt. Rentenversicherung Rheinland Königsallee 71 40194 Düsseldorf, Germany to confirm that its trust
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SK ID Solutions AS Pärnu avenue 141 11314 Tallinn, Estonia to confirm that its trust service EID-SK
More informationin the underlying contexts of use. The requirements and contexts of use are summarized in the appendix to the certificate.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Qingdao Haier Joint Stock Co., Ltd. Qianwangang Road, Haier Industrial Zone, Qingdao, Shandong 266510,
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust
More informationQingdao Haier Air Conditioner Gen. Corp., Ltd. Haier Industrial Park, Laoshan District, Qingdao Shandong , P.R. China
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Qingdao Haier Air Conditioner Gen. Corp., Ltd. Haier Industrial Park, Laoshan District, Qingdao Shandong
More informationTwinning Project Strengthening the metrology system in Azerbaijan Twinning ref. AZ/15/ENP/TR/36
INTRODUCTORY REMARKS Dear readers, With this second newsletter, we would like to provide brief information about the Twinning Project implemented within the State Committee for Standardization, Metrology
More informationDAkkS Who we are. Attesting competence, Assuring quality, Creating confidence.
DAkkS Who we are Attesting competence, Assuring quality, Creating confidence. What is accreditation? Reliability through conformity assessment The demands on the quality of goods and services are growing
More information(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and protective systems intended for use in potentially explosive atmospheres Directive 94/9/EC (3) EC-type-examination Certificate number
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company FNMT Real Casa de la Moneda C/Jorge Juan, 106 28009 Madrid, Spain to confirm that its trust service
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe Virtual CMM a software tool for uncertainty evaluation practical application in an accredited calibration lab
The Virtual CMM a software tool for uncertainty evaluation practical application in an accredited calibration lab Michael Trenk *, Matthias Franke **, Dr. Heinrich Schwenke ** * FEINMESS GmbH&Co. KG **
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust
More informationin the underlying contexts of use. The requirements and contexts of use are summarized in the appendix to the certificate.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company GAD eg GAD-Straße 2-6 48163 Münster, Germany to confirm that its mobile application Online-Filiale+,
More informationin the underlying contexts of use. The requirements and contexts of use are summarized in the appendix to the certificate.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company KPMG IT Service GmbH Klingelhöferstraße 18 10785 Berlin, Germany to confirm that its scheduling software
More informationEuroPython 2012 ( , Florence, Italy) Andreas Schreiber German Aerospace Center (DLR)
www.dlr.de Chart 1 > EuroPython 2012 > A. Schreiber > A Laboratory Notebook System > July 5, 2012 A Laboratory Notebook System EuroPython 2012 (05.07.2012, Florence, Italy) Andreas Schreiber
More informationPhysikalisch-Technische Bundesanstalt P1B
Physikalisch-Technische Bundesanstalt P1B Braunschweig und Berlin 1. SUPPLEMENT according to Directive 94191EC Annex 111.6 to EC-TYPE-EXAMINATION CERTIFICATE PTB 12 ATEX 2030 (Translation) Equipment: Marking:
More informationSándor Szőke, Dr. Microsec Ltd. Migration of national PKI Services to eidas conformant Trust Services case study in Hungary
Sándor Szőke, Dr. Microsec Ltd. Migration of national PKI Services to eidas conformant Trust Services case study in Hungary Introduction Private Hungarian IT company since 1984 Custom specific IT system
More informationThe appendix to the certificate is part of the certificate and consists of 4 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó NCP
More informationPTB Technical Cooperation in Asia: Update and Highlights 2016
PTB Technical Cooperation in Asia: Update and Highlights 2016 Report to the 23 rd APLMF Meeting, 23 25 November 2016, Tokyo Structure (1) PTB Technical Cooperation at a glance (2) Selected highlights and
More informationin the underlying contexts of use. The requirements and contexts of use are summarized in the appendix to the certificate.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company HanseMerkur Krankenversicherung AG Siegfried-Wedells-Platz 1 20354 Hamburg, Germany to confirm that
More informationHOW TO PROVE AND ASSESS CONFORMITY OF GUM-SUPPORTING SOFTWARE PRODUCTS
XX IMEKO World Congress Metrology for Green Growth September 9-14, 2012, Busan, Republic of Korea HOW TO PROVE AND ASSESS CONFORMITY OF GUM-SUPPORTING SOFTWARE PRODUCTS N. Greif, H. Schrepf Physikalisch-Technische
More informationeidas Workshop Return on Experience from Conformity Assessment Bodies - EY June 13, 2016 Contacts: Arvid Vermote
eidas Workshop Return on Experience from Conformity Assessment Bodies - EY June 13, 2016 Contacts: Arvid Vermote arvid.vermote@be.ey.com EY eidas Certification scheme Scheme EY CertifyPoint B.V. is currently
More informationAutocollimator Calibration for Synchrotron Metrology: Advancing from Plane to Solid Angle
Autocollimator Calibration for Synchrotron Metrology: Advancing from Plane to Solid Angle Ralf D. Geckeler, Oliver Kranz, Andreas Just, Michael Krause PTB - Physikalisch-Technische Bundesanstalt, Germany
More informationUncertified Translation Physikalisch-Technische Bundesanstalt Braunschweig und Berlin (1) EC Type Examination Certificate (2) Equipment and Protective Systems Intended for Use in Potentially Explosive
More informationeuropascal M easured quantities Relative pressure Differential pressure Barometer reading Temperature A pplications
M easured quantities Relative pressure pressure Absolute Differential pressure Barometer reading Temperature A pplications Problem analysis in the gas network Monitoring in gas pressure control and measuring
More informationOIML MAA Annual Report
OIML MAA Annual Report NMi Certin B.V. (NL01) 2013 Table of contents Table of contents... 2 1. General information... 3 1.1. Issuing Authority information... 3 1.2. The organization... 3 1.3. Internal
More informationto confirm that the usability engineering process consisting of the sub-processes
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Haier Innovation Design Center Haier Industial Park No.1 Haier Road 266101 Qingdao, P. R. China to confirm
More informationETSI European CA DAY TRUST SERVICE PROVIDER (TSP) CONFORMITY ASSESSMENT FRAMEWORK. Presented by Nick Pope, ETSI STF 427 Leader
ETSI European CA DAY TRUST SERVICE PROVIDER (TSP) CONFORMITY ASSESSMENT FRAMEWORK Presented by Nick Pope, ETSI STF 427 Leader ETSI 2012 All rights reserved Topics Background ETSI Activities / Link to Mandate
More informationOIML-CS PD-08 Edition 1
PROCEDURAL DOCUMENT OIML-CS PD-08 Edition 1 Signing the OIML-CS Declaration OIML-CS PD-08 Edition 1 ORGANISATION INTERNATIONALE DE METROLOGIE LEGALE INTERNATIONAL ORGANIZATION OF LEGAL METROLOGY Contents
More informationBACnet. Certification Handbook. Version 4.0. Valid as of ( )
BACnet Certification Handbook Version 4.0 Valid as of (25.01.2016) BACnet is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). Table of Contents
More informationThe German IT Security Certification Scheme. Joachim Weber
The German IT Security Certification Scheme Joachim Weber The German IT Security Certification Scheme 1. The role of the BSI 2. The German IT Certificate Scheme 3. Certification procedures in detail 4.
More informationIdentity Documents Personalisation Centre. Conformity Assessment Report: Conformity Certificate and Summary. T-Systems
Conformity Assessment Report: Conformity Certificate and Summary T-Systems.031.0258.05.2017 Trust Service Provider: Identity Documents Personalisation Centre Conformity Certificate T-Systems.031.0258.05.2017
More informationInvestigation of the film AGFA D4 in TETENAL machine processing
Investigation of the film AGFA D4 in TETENAL machine processing Test Report No.: BAM 8.3 / 7315 a Date: 03. 02. 2012 Name and address: TETENAL AG & CO. KG Schützenwall 31-35 22844 Norderstedt Investigation:
More informationto confirm that the usability engineering process consisting of the sub-processes The appendix is part of the certificate and consists of 5 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company ISAR User Interface Design 237-101 Nanhuxiyuan, Wangjing 100102 Beijing, China to confirm that the usability
More informationIECEx Certificate of Conformity
Certificate : IECEx PTB 04.0005 http://iecex.iec.ch/iecex/iecexweb.nsf/certificatesajax/iecex%20ptb%2004.0005%... Seite 1 von 4 10.01.2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme
More informationAnnex No. 1 as of April 30, to the certification report. T-Systems-DSZ-ITSEC as of September 24, 2002
Annex No. 1 as of April 30, 2004 to the certification report T-Systems-DSZ-ITSEC-04084-2002 as of September 24, 2002 1 Scope of this annex 1 This annex describes - all changes applied by the vendor to
More informationIECEx Certificate of Conformity
--- Certificate : ECEx PTB 13.0036X Seite 1 von 5 ECEx Certificate ------ -- l "-- - --- --- NTERNATONAL ELECTROTECHNCAL COMMSSON EC Certification Scheme for Explosive Atmospheres for rules and details
More informationConfirmation concerning Products for Qualified Electronic Signatures
Confirmation concerning Products for Qualified Electronic Signatures according to 15 Sec. 7 S. 1, 17 Sec. 4 German Electronic Signature Act 1 and 11 Sec. 2 and 15 German Electronic Signature Ordinance
More informationKrajowa Izba Rozliczeniowa S.A.
Conformity Assessment Report: Conformity Certificate and Summary T-Systems.031.0257.U.10.2018 Trust Service Provider: Krajowa Izba Rozliczeniowa S.A. Conformity Certificate T-Systems.031.0257.06.2017 Attachment
More informationAPLAC Application to Enter the APLAC MRA or to Extend Scope - APLAC MR 003
ASIA PACIFIC LABORATORY ACCREDITATION COOPERATION MUTUAL RECOGNITION ARRANGEMENT (MRA) COUNCIL Application to Become a Signatory to the APLAC Mutual Recognition Arrangement (APLAC MRA) or to Extend Scope
More informationETSI ESI and Signature Validation Services
ETSI ESI and Signature Validation Services Presented by: Andrea Röck For: Universign and ETSI STF 524 expert 24.10.2018 CA day ETSI 2018 Agenda Update on standardisation under eidas Signature validation
More informationPTB 01 ATEX 2064 U, IECEx PTB U. Example / Beispiel / Exemple: Type Operating Instructions
, Equipment protection fuse with Ex mb II C Gb approval Geräteschutzsicherung mit Zulassung Ex mb II C Gb Fusible de protection d appareil avec homologation Ex mb II C Gb Example / Beispiel / Exemple:
More informationChallenges of retrofit equipment: Certification, Type Approval and Declaration of Conformity. 20 May 2017 NavCert 1
Challenges of retrofit equipment: Certification, Type Approval and Declaration of Conformity 20 May 2017 NavCert 1 Certification Declaration of Conformity CE Type approval 19. September 2017 NavCert Product
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20356-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.01.2019 to 04.10.2022 DEHN + SÖHNE GmbH + Co.KG.
More informationQuality Assurance and esecurity
Ministère de l Economie, de l Industrie et de l Emploi Department for Economy, Industry and Employment Quality Assurance and esecurity Claude DAULAUD In-vehicle Communication, Telematics and Co-operative
More informationUH28C. High Voltage Tester. Product Information Sheet V AC / 100 ma
UH28C High Voltage Tester 5 000 V AC / 100 ma Product Information Sheet Short summary - overview Item number 200366 Test voltage Test current, limit Power 100 5 000 V AC, 0,5-100 ma > 500 VA Short circuit
More informationMr. Chaobin Li China Lucky Film Corp. No. 6 Lekai South Street 6, Baoding, Hebei Province, PRC Tel.:
Evaluation of the image quality of X-ray exposed radiographic film samples of Lucky Film L4 in standard AGFA NDT S machine processing (8 min cycle time) BAM reference Copy Customer BAM 8.3/7728a 1 st copy
More informationSLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008
SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 REQUIREMENTS FOR CERTIFICATION BODIES CONDUCTING FOREST CERTIFICATION AND CHAIN - OF - CUSTODY OF WOOD VERIFICATION SFCS 1005:2004 Effective as of September
More informationLegal Regulations and Vulnerability Analysis
Legal Regulations and Vulnerability Analysis Bundesamt für Sicherheit in der Informationstechnik (BSI) (Federal Office for Information Security) Germany Introduction of the BSI National Authority for Information
More informationIT SECURITY IN CONTEXT OF INDUSTRIE 4.0 PROTECTION OF PRODUCTION DATA
IT SECURITY IN CONTEXT OF INDUSTRIE 4.0 PROTECTION OF PRODUCTION DATA IUNO Germany s National reference project for IT-Security in Industrie 4.0 Fraunhofer SIT 2016 Dr. Th. Henkel SIT/ISS AGENDA Fraunhofer
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This gives the list of EA documents to be
More informationan Important Step Toward an Integrated Electronic Engineering and Business Workflow
PROLIST List of Properties an Important Step Toward an Integrated Electronic Engineering and Business Workflow Abstract Optimizing the engineering and business workflow with up-to-date computer programming
More informationBetter Regulatory Outcomes & the CASCO Toolbox
2011/SOM1/SCSC/CON1/013 Session 8 Better Regulatory Outcomes & the CASCO Toolbox Submitted by: Underwriters Laboratories 6 th Conference on Good Regulatory Practice Washington, D.C., United States 1-2
More informationCertification Scheme
Certification Scheme Sustainable Biomass according to ISCC certification system (Edition: January 2017) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax: +49 30 7562-1141 E-Mail: info@dincertco.de
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx PTB 05.0013 issue No.:2
More informationLaboratory Accreditation Building Confidence on Testing Quality
Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME
More informationElectronic ID in Germany. Dr. Stephan Klein Managing Director Governikus GmbH & Co. KG Logius Event
Electronic ID in Germany Dr. Stephan Klein Managing Director Governikus GmbH & Co. KG Logius Event Table of Contents Authentication in Germany Infrastructure (Client, Hardware, Participants) Authentication
More informationdigiseal server User Guide
Page 1 of 57 Server software for central automated processes secrypt GmbH Bessemerstraße 82 D-12103 Berlin, Germany Tel: +49 30 7565978-0 Fax: +49 30 7565978-18 mail@secrypt.de www.secrypt.de Last Revision:
More informationPTB 01 ATEX Example / Beispiel / Exemple. Type Operating Instructions
Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Example / Beispiel / Exemple Type 6106 Operating Instructions Bedienungsanleitung Manuel d utilisation
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
More informationHohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany
Certification Body Products Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein 74357 Boennigheim Germany File: APPLICATION for award of the GS safety mark for a HuPF assessment (for products) for
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx PTB 10.0014U Date of Issue: 2010-03-02 Issue No.: 0 Page 2 of 3 Manufacturer: BARTEC GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim Germany Manufacturing
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:2 Status: Current Certificate history:
More informationThe BIPM in the International Standards and Conformance Infrastructure
Bureau International des Poids et Mesures The BIPM in the International Standards and Conformance Infrastructure with particular reference to economic value and impact Dr Barry Inglis President, CIPM APMP
More informationInternational Accreditation Forum, Inc. User Advisory Committee UAC
International Accreditation Forum, Inc. User Advisory Committee UAC UAC Position Paper UAC- N018 Users Expectations of Accreditation, of the Multilateral Recognition Arrangement (MLA) between Accreditation
More informationCERTIFICATE OF CONFORMITY. The certification body LSTI. declares BALTSTAMP HEADQUARTER : DARIAUS IR GIRENO STR. 40, LT VILNIUS - LITHUANIA
CERTIFICATE OF CONFORMITY The certification body LSTI declares BALTSTAMP HEADQUARTER : DARIAUS IR GIRENO STR. 40, LT-02189 VILNIUS - LITHUANIA Provides trust electronic services 1 that comply with Regulation
More informationIT services as a matter of course. From strategy, through IT auditing to security
IT services as a matter of course From strategy, through IT auditing to security dhpg An auditing company with IT division? dhpg is a consultancy firm with emphasis on financial auditing, tax and legal
More informationDraft ETSI EN V ( )
Draft EN 319 412-2 V2.0.15 (2015-06) EUROPEAN STANDARD Electronic Signatures and Infrastructures (ESI); Certificate Profiles; Part 2: Certificate profile for certificates issued to natural persons 2 Draft
More informationITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles
ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability Session 2: Conformity Assessment Principles 12-16 October 2015 Beijing, China Keith Mainwaring ITU Expert Agenda 1. Context
More informationPDF/A in the Product Lifecycle
Webinar Series of the PDF/A Competence Center PDF/A in the Product Lifecycle Requirements of the Engineering to PDF/A, VP Business Development Torsten Pfeiffer, Sales Manager SEAL Systems AG, Röttenbach
More informationAccreditation Body Evaluation Procedure for AASHTO R18 Accreditation
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria
More informationAGENCE NATIONALE DE LA CERTIFICATION ELECTRONIQUE
CERTIFICATE OF CONFORMITY The certification body LSTI declares AGENCE NATIONALE DE LA CERTIFICATION ELECTRONIQUE HEADQUARTER: PARC TECHNOLOGIE EL GHAZALA ROUTE DE RAOUED KM, 3,5 2083 ARIANA - TUNISIE Provides
More informationSarah Hartmann, Jürgen Kett. The GND initiative : Developing a backbone for the web of cultural and scientific data
1 Sarah Hartmann, Jürgen Kett The GND initiative 2017-2021: Developing a backbone for the web of cultural and scientific data 2 19 GND initiative 2017-2021 LIBER 2017 7th July 2017 The Integrated Authority
More informationGEOMETRIC CALIBRATION OF CMMs USING 3D LENGTH MEASUREMENTS
GEOMETRIC CALIBRATION OF CMMs USING 3D LENGTH MEASUREMENTS F.P. d Hooghe 1, P. Schellekens 2 and L. Levasier 2 1 Metrology Laboratory in Europe, Mitutoyo Nederland B.V. 2 Section Precision Engineering,
More informationLASPORT - A MODEL SYSTEM FOR AIRPORT-RELATED SOURCE SYSTEMS BASED ON A LAGRANGIAN PARTICLE MODEL
LASPORT - A MODEL SYSTEM FOR AIRPORT-RELATED SOURCE SYSTEMS BASED ON A LAGRANGIAN PARTICLE MODEL U. Janicke 1, E. Fleuti 2, I. Fuller 3 4 Janicke Consulting, Überlingen, Germany; 2 UNIQUE, Zürich, Switzerland
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationTowards a National Data Infrastructure First Insights Regarding Its Design and Its Governance
Towards a National Data Infrastructure First Insights Regarding Its Design and Its Governance Opendata.ch Conference, 13 June 2016, Lausanne Beat Estermann, Marianne Fraefel, Prof. Dr. Alessia Neuroni
More informationKrajowa Izba Rozliczeniowa S.A.
Conformity Assessment Report: Conformity Certificate and Summary T-Systems.031.0257.U.12.2018 Trust Service Provider: Krajowa Izba Rozliczeniowa S.A. Conformity Certificate T-Systems.031.0257.06.2017 Attachment
More informationSiemens view and approach on critical infrastructure resilience against cyberthreats Joint OECD-JRC Workshop, Paris September 2018
Siemens view and approach on critical infrastructure resilience against cyberthreats Joint OECD-JRC Workshop, Paris 24-25 September 2018 Unrestricted https://www.siemens.com/press/charter-of-trust Cybersecurity
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:3 Status: Current Date of Issue: 2012-10-12
More informationeidas Regulation eid and assurance levels Outcome of eias study
eidas Regulation eid and assurance levels Outcome of eias study Dr. Marijke De Soete Security4Biz (Belgium) ETSI eidas Workshop 24 June 2015 Sophia Antipolis eidas Regulation Regulation on electronic identification
More informationEUROPEAN ACCREDITATION LEGAL FRAMEWORK
EUROPEAN ACCREDITATION LEGAL FRAMEWORK ECIBC Plenary 2016 Ed Wieles 24 November 2016 CONTENTS European model on Accreditation Requirements for Accreditation bodies Harmonised standards for accreditation
More informationSmartCards as electronic signature devices Progress of standardization. Helmut Scherzer, CEN TC224/WG16 (Editor) IBM Germany
SmartCards as electronic signature devices Progress of standardization Helmut Scherzer, CEN TC224/WG16 (Editor) IBM Germany scherzer@de.ibm.com Active CEN working groups(today) TC224 : "Machine readable
More informationUPDATE ON CEN & ETSI STANDARDISATION ON SIGNATURES
UPDATE ON CEN & ETSI STANDARDISATION ON SIGNATURES Workshop eidas Trust Services: 6 months on after the switch-over 19 December 2016 Riccardo Genghini, TC ESI chairman Topics eidas Standards Status ETSI
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 15945 First edition 2002-02-01 Information technology Security techniques Specification of TTP services to support the application of digital signatures Technologies de l'information
More informationNational Accreditation Scheme
National Accreditation Scheme Rules of Procedure on the Preparation of Accreditation Audit Cycle NAR-25 Edition 3 Version 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation:
More informationGuidelines for the approval of consultants for Cyber Security
VdS Guidelines for Information Security VdS 3477en Guidelines for the approval of consultants for Cyber Security VdS 3477en : 2015-11 (03) Publisher and publishing house: VdS Schadenverhütung GmbH Amsterdamer
More informationNew cybersecurity landscape in the EU Sławek Górniak 9. CA-Day, Berlin, 28th November 2017
in the EU Sławek Górniak 9. CA-Day, Berlin, 28th November 2017 European Union Agency for Network and Information Security Positioning ENISA activities CAPACITY Hands on activities POLICY Support MS & COM
More informationPTB 01 ATEX Operating Instructions. Solenoid coil Type AC21 Magnetspule Typ AC21 Bobine magnetique AC21
Solenoid coil Type AC21 Magnetspule Typ AC21 Bobine magnetique AC21 Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Operating Instructions Bedienungsanleitung
More informationNational Cooperation for Laboratory Accreditation Annual General Meeting International versus National Recognition: A Comparison
National Cooperation for Laboratory Accreditation Annual General Meeting International versus National Recognition: A Comparison August 2011 1 Purpose of International Recognition Simply put, the purpose
More informationfulfils all applicable audit criteria for document management solutions of VOI Verband Organisations- und Informationssysteme e. V.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company AWG Allgemeine Warenvertriebs-GmbH Imanuel-Maier-Straße 2 73257 Köngen, Germany to confirm that its
More informationList of EA Publications. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2014 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
More informationWho is doing your calibration work?
The United Kingdom Accreditation Service Who is doing your calibration work? Are you confident that your goods and services and their component parts are based on measurements taken with correctly calibrated
More informationSTABILITY OF THE 32 MN FORCE CALIBRATION MACHINE AND INDUSTRIAL APPLICATIONS
STABILITY OF THE 32 MN FORCE CALIBRATION MACHINE AND INDUSTRIAL APPLICATIONS Andrei Marinescu, Gheorghe Opran, Dorin Popa, ICMET National R&D Testing Institute, Craiova, Romania Amritlal Sawla, Günther
More information