TM Patch History Last Updated 2010/09/17 Version 13

Transcription

1 TM Patch History Last Updated 2010/09/17 Version 13 To contact Array Networks, Inc. Customer Support, please call MY-ARRAY ( ) or the team at Additional Information: Array Networks, Inc McCarthy Blvd. Milpitas, CA Phone: (408) Toll Free: MY-ARRAY Fax: (408) Telephone access to Array Networks, Inc. is available Monday - Friday, 9 A.M. to 5 P.M. PST.

2 TM x Release Patch History Release Date Work ID Component Change Description TM /9/ WebUI Support the external IP address for SLB (build date FTP and SLB FTPS data connection on ) WebUI Proxy Cache Fix a problem of Vary header error log caused by Vary field contains * character General SLB SLB Fix a system unstable problem caused by Eroute table work failure under stress testing. Support the external IP address for SLB FTP and SLB FTPS data connections. Fix an SLB 503 error caused by that SLB backup policy could not be hit when Real service is in overload status WebUI Fix incomplete page display problem caused by host name contains - character ClickTCP Fix a panic caused by that RDP service received a data packet with FIN flag General Fix an Enable password problem when input an invalid enable password SLB Add upper limit (3600 sec) for Real Service recovery time and warm-up time GSLB Fix a problem to enable SDNS DPS detector to work with Cluster IP Security Holes Update Apache to to avoid the vulnerability CVE SNMP Change MIB Object-type name first letter to lower case to comply with RFC WebUI Fix a Real service sorting problem on WebUI SSL Add regular expression support for command http acl url.

3 TM /7/16/ (build date ) SLB Add regular expression support for the host field of commands http rewrite and http redirect General Fix a TCP Syslog lost problem during new setup new TCP connection to log server SLB Fix a SharePoint integration issue: proper process server response before client request is completed SSL Add SSL session ID for Fastlog SLB Add a debug tool for SLB traffic trace support WebUI Add SLB RDP for full Microsoft Terminal Services support on WebUI General Add Border Gateway Protocol (BGP) support LLB Fix reboot problem caused by removing SDNS site under load SLB Fix backup group not taking traffic problem with cookie-based policy WebUI Fix a hostname display problem General Fix system statistics counter overflow error when unit run over 280 days CLI Add SNMP v2c support for SDNS SNMP load balancing method CLI Check the input of snmp on {}, only allow default or v WebUI Update WebUI SSL Certificate/Key with strong cipher for better security WebUI Fix bond interface missing IP statistics update errors LLB Fix a LLB statistics report issue SSL Fix errors when passing certificate OID data has Chinese characters with customized name General Resolve a high CPU usage problem caused by rrdtool SLB Purge imported HTTP/SSL error pages as part of clear config factorydefault.

4 TM (GA) 2010/4/30 (build date ) General Fix an alert mail problem CLI Add SLB FTPS for implicit FTPS support CLI Add SLB RDP for full Microsoft Terminal Services support.

5 Appendix A Enhancement 27051; Support the external IP address for SLB FTP and SLB FTPS data connection. A new command is added for this enhancement. ftp passive externalip <vsname> <ip> vsname Ip The name of the virtual service. The external IP address. Enhancement 26413, 26411; Add SNMP v2c support for SDNS SNMP load balancing method. sdns snmp version [{v1 v2c}] The version of snmp protocol for manager to collect data, support v1 and v2c, default is snmp v2c. Enhancement 26412; Check the input of snmp on {}, only allow default or v3. snmp on [{default v3}] This command allows users to set the SNMP versions which are supported by the Array appliance SNMP agent. default means that the SNMP agent supports three SNMP versions: v1, v2 & v3. v3 means that SNMP agent only supports SNMP version 3. Enhancement 25653; Add regular expression support for command http acl url. http acl url <virtual_service> <path> [level 0 1 2] For the <path> parameter, add regular expression support. Enhancement 25230; Add regular expression support for the host field of commands http rewrite and http redirect. http rewrite request url <virtual_name> <policy_name> <priority> <orig_host> <path_regex> <new_host> <path_replacement> For the <new_host> parameter, add regular expression support. http rewrite response url <virtual_name> <policy_name> <priority> <orig_protocol> <orig_host> <path_regex> <new_protocol> <new_host> <path_replacement>

6 For the <new_host> parameter, add regular expression support. http redirect url <virtual_name> <policy_name> <priority> <orig_host> <path_regex> <new_protocol> <new_host> <path_replacement> <response_code> For the <new_host> parameter, add regular expression support. Enhancement 23631; Add a debug tool for SLB traffic trace support. A new command is added for this enhancement. show slb server <client_ip> <IP_Mask> [<vs_name> <time_inteval>] client_ IP IP_Mask vs_name time_inteval The client IP address. It supports a single IP address or a range of IPs. The client network mask. The name of the virtual service. It should be a valid Virtual Service Name; the client and server access information will be collected only under this Virtual Service when this option is specified. The time internal (in seconds) of client access information collection. The default value is 10. Enhancement 22162; Add SLB FTPS for implicit FTPS support. slb virtual ftps <virtual_name> <ip> [port] [max_conn] virtual_name ip port max_conn An assigned name, in the form of a character string, to the virtual service. Note: If the assigned name begins with a numeric character, then the string should be framed in double quotes. The virtual server IP address, in traditional dotted IP format. The virtual server port. When the port is 0, the virtual service is a virtual service with all-port range and this port range may be narrowed down by using the slb virtual port command. Set the maximum number of open connections per VIP. Default is 0. Enhancement 19797; Add SLB RDP for full Microsoft Terminal Services support.

7 slb virtual rdp <virtual_name> <ip> [port] [arp noarp] [maxconn] virtual_name ip port arp noarp max_conn An assigned name, in the form of a character string, to the virtual service. Note: If the assigned name begins with a numeric character, then the string should be framed in double quotes. The virtual server IP address, in traditional dotted IP format. The virtual server port. When the port is 0, the virtual service is a virtual service with all-port range and this port range may be narrowed down by using the slb virtual port command. If this parameter is provided, a noarp SLB virtual service is defined. A noarp SLB virtual service doesn t have its virtual IP address added in the network interfaces. Therefore, the virtual IP addresses of a noarp SLB virtual service can t be pinged or ARPed. This enables the client to send packets to the real service s IP address directly without knowing any new virtual IP address. In this case, Array appliance should be set as the client s gateway. The Array appliance will forward the traffic to the real servers after some kinds of SLB processing, e.g.: SSL acceleration. It defaults to arp. Set the maximum number of open connections per VIP. Default is 0. slb real rdp <real_name> <ip> [port] [maxconn] [tcp icmp] [hc_up] [hc_down] real_name ip port max_conn tcp icmp An alpha-numeric string for the real service name. Note: If the assigned name begins with a numeric character, then the string needs to be framed in double quotes. The real service s IP address The port number that the real service will answer incoming requests. When the port is 0, it is a port range real service, and its port range is considered all-port. Sets the maximum number of open connections per real server. Default is Health check type performed to determine real service availability.

8 hc_up hc_down The number of health checks to be performed with a positive result before marking the service as up. The default value is 3. The number of health checks to be performed with a negative result before determining the service as down. The default value is 3. For "slb group method <group_name> [algorithm]" Add algorithm "rdprt" for RDP Routing Token algorithm.