Release Date: May 10, Revision 1.1; May 12, 2016

Size: px

Start display at page:

Download "Release Date: May 10, Revision 1.1; May 12, 2016"

June Crawford
5 years ago
Views:

1 ArrayOS APV Release Note Introduction ArrayOS APV Release Notes Release Date: May 10, 2016 Revision 1.1; May 12, 2016 This release note summarizes the general enhancements, resolved issues and known limitations for ArrayOS APV Contacting Customer Support To contact Array Networks Customer Support, please call or the team at Additional Information: Array Networks, Inc McCarthy Blvd. Milpitas, CA Phone: (408) Toll Free: (1-866-MY-ARRAY) Fax: (408) Telephone access to Array Networks is available Monday - Friday, 9 A.M. to 5 P.M. PST. Array Networks, Inc. All Rights Reserved. 1

2 ArrayOS APV Release Note Table of Contents REVISION HISTORY... 3 ENHANCEMENTS... 4 Server Load Balance (SLB)... 4 Link Load Balance (LLB)... 4 General System/Tools... 4 WebUI... 4 Legacy WebUI... 5 RESOLVED ISSUES... 7 Server Load Balance (SLB)... 7 High Availability (HA)... 7 General System/Tools... 7 WebUI... 8 Legacy WebUI... 8 vapv... 9 KNOWN LIMITATIONS Array Networks, Inc. All Rights Reserved. 2

4 ENHANCEMENTS Server Load Balance (SLB) Adding HTTP/2 configuration to the output of show slb summary (ID: 60810) To help the administrator better monitor the system, the configurations of slb virtual option http2 enable and slb group option http2 have been added to the output of the show slb summary command. Link Load Balance (LLB) Supporting changing weight value of LLB link route (ID: 56636) Previously, after an LLB link route was configured using the llb link route command, the weight value of the link route could not be changed. From ArrayOS APV , the administrator can change the weight value of the existing link route as required using the llb link route command. General System/Tools Adding logs for system login failures (ID: 60782) Now, logs will be recorded for system login failures. For example: INFO 2016 Apr 19 14:44:11 user array log in by SSH from ip port to ip port 22 failed Optimizing log for the config terminal command (ID: 60600) Previously, the log for the config terminal command was in the format of CLI: User array executed cmd c t, and the abbreviation would confuse administrators. Now, the log format is changed to User array executed cmd config terminal. WebUI Adding registration status and link (ID: 61741) The Registration Status and Register Now link have been added to System Dashboard. Array Networks, Inc. All Rights Reserved. 4

5 Adding two themes (ID: 60372) From ArrayOS APV , two themes have been added to provide diverse styles. Statistics graph enhancements (ID: 60318&61560) The following statistics graph enhancements have been added: In Dashboard > Graphs, statistics graphs have been added for the Compression, Cache, Proxy and SSL functions. The statistics graph for system memory utilization has been moved from System Status in Dashboard to Dashboard > Graphs. The statistics graph for network memory utilization has been added to System Status in Dashboard. Legacy WebUI Enhancing WebUI access security (ID: 61767) To enhance access security, the access to WebUI using RC4 cipher suites has been disallowed. Optimizing configuration methods for legacy WebUI (ID: 60599) Previously, both the WebUI and legacy WebUI were controlled by the webui {on off} command. That is, when the webui on command was executed, both WebUI and legacy WebUI were enabled, and legacy WebUI used the fixed port number 8080 for access, which could not be changed. Such system behavior would confuse administrators and using fixed port 8080 might lead to security risks. Now, the WebUI and legacy WebUI can be enabled independently, and the port for accessing legacy WebUI is configurable. To support this enhancement, the following commands are added: webui legacy {on off} This command is used to enable or disable the legacy WebUI. By default, the legacy WebUI is disabled. webui legacy port <port> This command is used to change the port number for accessing the legacy WebUI. If this command is not configured, the default port number 8889 will be used. clear webui legacy port This command is used to reset the port number for accessing the legacy WebUI to the default value Array Networks, Inc. All Rights Reserved. 5

6 To support this enhancement, the following commands are modified: Before: webui {on off} This command is used to enable or disable WebUI. After this command is executed, both the WebUI and legacy WebUI are enabled or disabled. Now: webui {on off} This command is used to enable or disable the WebUI. By default, the WebUI is disabled. Supporting one-time password for WebUI external authentication (ID: 57649) Previously, when the system used an external authentication server for administrator authentication, the login to the system via legacy WebUI would fail if the external authentication server required one-time password (OTP). Now, legacy WebUI supports the external authentication requiring OTP. Also, the legacy WebUI login page and the enable mode login page are integrated. With this enhancement, the administrator can successfully log into the system via legacy WebUI by entering the username, the OTP password obtained from the external authentication server, and the enable password of the system on the legacy WebUI login page. Array Networks, Inc. All Rights Reserved. 6

7 RESOLVED ISSUES Server Load Balance (SLB) RADIUS authentication health check configurations lost after system reboot (ID: 61558) After system reboot, the saved configurations of RADIUS authentication health check were lost. This issue has now been resolved. High Availability (HA) Failing to synchronize certificate and key in HA runtime synconfig (ID: 61654) When HA runtime synconfig was enabled, synchronizing a certificate and key between HA units failed after the ssl csr command was executed. This issue has now been resolved. Slight possibility of system malfunction with complicated configurations and heavy traffic (ID: 61598) When HA and other multiple functions were configured and traffic was heavy, there might be a slight possibility that the system malfunctioned such as SSL failure and WebUI turning disabled. This issue has now been resolved. General System/Tools Incomplete bond interface configurations captured in debug trace (ID: 61395) In the file containing debugging data of system activities, captured bond interface configuration was incomplete. This issue has now been resolved. System vulnerabilities (ID: 61040&61764&60787) ArrayOS APV has addressed the vulnerabilities reported as CVE and CVE Array Networks, Inc. All Rights Reserved. 7

8 Model mismatch prompt in configuration restore on Array APV 1600 Turbo (ID: 60808) On Array APV 1600 Turbo, when correct configurations were being restored from a remote host, the system would prompt The following items don't match: Model, do you want to continue [YES/NO]. This issue has now been resolved. Memory utilization error (ID: 60350&60954) When traffic was heavy, system memory overload might occur due to an overload check error. This issue has now been resolved. WebUI Failing to display system interfaces for HA groups (ID: 61997) When adding HA group-related configurations via WebUI, such as adding the floating IP for an HA group, the administrator could not associate the configuration with any system interface because no system interface was displayed in the interface drop-down list. This issue has now been resolved. Affected release: ArrayOS APV Failing to display active interfaces (ID: 61681) In Dashboard > System Dashboard, the active interfaces and its configurations were not displayed. This issue has now been resolved. Affected release: ArrayOS APV Failing to display health check status for real service with long name (ID: 60972) When the name of a real service consisted of 17 or more characters, the health check information of the real service was not displayed. This issue has now been resolved. Legacy WebUI Array Networks, Inc. All Rights Reserved. 8

9 Failing to enable HTTP content rewrite permit URL for virtual service with numeric name (ID: 59898) In Proxy > Caching Proxy > Content Rewrite > Rewrite List, if the name of a virtual service was numeric, adding content rewrite permit URL for the virtual service would fail. This issue has now been resolved. vapv Port status displayed as UP with cable unplugged (ID: 61860) Port status was displayed as UP even when the cable was unplugged. This issue has now been resolved. System reboot and license invalidity with high Hyper-V workloads (ID: 61207) When the workloads of the Hyper-V host were high, the vapv system might automatically reboot due to a CPU allocation error in Hyper-V, and system license would become invalid after the reboot. This issue has now been resolved. Array Networks, Inc. All Rights Reserved. 9

ArrayOS APV Release Note

ArrayOS APV Release Note Introduction Release Date: August 3, 2016 This release note summarizes the new features, general enhancements, resolved issues and known limitations for ArrayOS APV 8.6.0.30. Contacting Customer Support