Parts Manual 10303P, 80363P, 80383P & 80403P. Wide Row 3-Point Planter. Copyright 2009 Printed 10/21/ P Rev.A
|
|
|
- Merryl Dean
- 5 years ago
- Views:
Transcription
1 Parts Manual Wide Row 3-Point Planter 10303P, 80363P, 80383P & 80403P Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2009 Printed 10/21/ P Rev.A
2 Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frames...6 Frame...6 Drives...8 Gauge Wheel Arm & Spring Link...8 Lower Drive...10 Tire & Hub Drive...12 Upper Right Hand Drive...14 Transmission...16 Sprocket Storage & Transmission Shield...18 Decals...20 Decal Placement...20 Options...22 Flat Fold Marker...22 Marker Disk Assembly (January 1996+)...24 Marker Disk Assembly (December 1995-)...26 Marker Hydraulics...28 Marker Hydraulic Cylinder ( C)...30 Marker Sequence Valve ( C)...32 Marker Stand...34 Terra Tine Unit Mount...36 Terra Tine Wheel Assembly Copyright 2009 All rights reserved Printed 10/21/09 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P Rev.A /21/09
3 Alphabetized Selected Models D Decal Placement...20 F Flat Fold Marker...22 Frame...6 G Gauge Wheel Arm & Spring Link...8 L Lower Drive...10 M Marker Disk Assembly (December 1995-)...26 Marker Disk Assembly (January 1996+)...24 Marker Hydraulic Cylinder ( C)...30 Marker Hydraulics...28 Marker Sequence Valve ( C)...32 Marker Stand...34 S Sprocket Storage & Transmission Shield...18 T Terra Tine Unit Mount...36 Terra Tine Wheel Assembly...38 Tire & Hub Drive...12 Transmission...16 U Upper Right Hand Drive /21/ P Rev.A
4 P Rev.A -4-10/21/09
5 10/21/ P Rev.A
6 Frame P Rev.A /21/09
7 Frame Frames Ref. Part No. Part Description Comments Revision dwg H C C C D C C C C C C D C C D D C C H C H H C C C C Image No. WIDE ROW FRAME WELDMENT HHCS 5/16-18X1 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT SMV BAR DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1 GR5 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT CAP, FRAME HHCS 5/8-11X1 3/4 GR5 HHCS 3/8-16X1 GR5 SUPPORT, COUNTER SHAFT RPBY C WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT FRAME STAND HANDLE PIN HITCH 1/2 X 3 USABLE LG FRAME STAND WELD FRAME STAND MOUNT PIN SPIROL 3/8X2 1/2 PLAIN U-BOLT 5/8 X 7 1/32 X 8 1/2 PIN HITCH 1 7/16 X 8 3/8 PLT PIN HITCH 1 1/4 X 4 1/2 Obsolete. No longer available. 10/21/ P Rev.A
8 Gauge Wheel Arm & Spring Link P Rev.A /21/09
9 Drives Gauge Wheel Arm & Spring Link Ref. Part No. Part Description Comments Revision dwg S C D D C D C H C C C D H C C C C S D V H D C Image No. LINK, SPRING ADJUSTER NUT ACME THD 1-5 WASHER, HEAVY FLAT BLOCK MOUNTING SPRING COMP 2.69X3.25X.375W LINK, ADJUSTMENT BUSHING CYL 1 1/4 X 1 X 1 ADJ ROD WELD GREASE ZERK STRAIGHT 1/4-28 HHCS 3/4-10X1 1/2 GR5 NYL PLT U-BOLT 3/4-10 CORNER 7 SQ SLEEVE SPRING LINK MOUNT MOUNT, GAUGE WHEEL WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X1 1/4 GR5 PIVOT TUBE ASSY TUBE PIVOT BEARING.880 HEX BORE 205DD WHEEL ARM WELD PIN SPRING LINK PIN ROLL 1/4 X 1 1/2 LG PLT Includes items 2 thru 9. Includes items 19 & /21/ P Rev.A
10 Lower Drive P Rev.A /21/09
11 Lower Drive Drives Ref. Part No. Part Description Comments Revision dwg S K C C C C H D C C C C D H C C C D C D C D C C C D S S Image No. HUB ASSEMBLY, DRIVE TIRE 9.5LX15 ON 6IN 5BOLT RIM WASHER LOCK SPRING 3/4 PLT HHCS 3/4-10X2 1/4 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT SHIELD WELD DR GA WHL SHAFT JACK SPKT 40B29 X.885 HEX BORE WASHER MACH 1 3/4 X 1 X 18 GA PIN ROLL 1/4 X 1 1/2 LG PLT PRESS WHEEL ARM PIVOT BUSHING BOLT IDLER PIVOT SHIELD WELD OUTER DGW HFSS 1/4-20X5/8 GR5 RPBY D HHCS 1/2-13X2 3/4 GR5 SLEEVE SPACER SHIELD SPRING EXT 1.06ODX3.5X.135W IDLER BOLT NO T IDLER SPKT. FIRMING WHL, MOUNTING COLLAR NUT LOCK 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X7/8 GR5 PLATE, IDLER IDLER ASSY GA WHL RH IDLER ASSY GA WHL LH Refer to "Tire & Hub Drive" for breakdown. Refer to "Tire & Hub Drive" for breakdown. Includes items 20 thru 26. Includes items 20 thru /21/ P Rev.A
12 Tire & Hub Drive P Rev.A /21/09
13 Drives Tire & Hub Drive Ref. Part No. Part Description Comments Revision dwg S C C C D H H C WB16 HA C C C K C C C Image No. HUB ASSEMBLY, DRIVE HHCS 5/16-18X2 1/4 GR5 WASHER LOCK SPRING 5/16 PLT SPKT 40A30 X 2 3/4 BORE SPACER, SPROCKET SPINDLE WELDMENT RPBY H BRG CONE 1.50ID 13600LA90028 REP BY C STUD HUB CTD WHEEL HUB GREASE ZERK STRAIGHT 1/4-28 NUT LUG 1/2-20X90DEG PLT 13/16 NUT HEX JAM 1 1/2-12 PLT TIRE 9.5LX15 ON 6IN 5BOLT RIM RPBY C WHEEL 6 X 15 X 5 BOLT VALVE STEM TR415X.625X1 1/4 LG Includes items 2 thru 13. Shown Includes items 15, 16 & 17. 2nd rev. use existing stock; 1st rev. 10/21/ P Rev.A
14 Upper Right Hand Drive P Rev.A /21/09
15 Drives Upper Right Hand Drive Ref. Part No. Part Description Comments Revision dwg C H H C C D C C C V C H C C C D C C D D C D S S C D C C D C D S D S C C D S D C D D D D Image No. HFSS 1/4-20X5/8 GR5 SHIELD WLD, LH CTR.SHFT.SUPT. SHIELD WLD, RH CTR.SHFT.SUPT. RPBY D PIN ROLL 1/4 X 1 1/2 LG PLT SHAFT JACK WASHER MACH 1 3/4 X 1 X 18 GA SPKT 40C30 X 7/8 HEX BORE SPRING EXT 1.06ODX5.5X.135W BEARING.880 HEX BORE 205DD DOUBLE DISK ARM PIVOT BUSHINGS SUPPORT, COUNTER SHFT WLD WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X7/8 GR5 WASHER FLAT 3/8 USS PLT SLEEVE IDLER PIVOT NUT HEX 3/8-16 PLT NUT LOCK 3/8-16 PLT FIRMING WHL, MOUNTING COLLAR PLATE, IDLER NO T IDLER SPKT. IDLER BOLT IDLER ASSY CTR SHFT SUPT RH IDLER ASSY CTR SHFT SUPT LH HSHCS 1/4-20X7/8 CLUTCH, SIDE PLATE C/BORED SPKT 40A28 SPECIAL BORE KEY, RATCHET CLUTCH POLYURETHANE RATCHET SPRING HUB, RATCHET CLUTCH CLUTCH, SIDE PLATE TAPPED RATCHET CLUTCH ASSEMBLY SHAFT COUNTER SUPPORT COUNTER SHAFT HHCS 3/8-16X1 GR5 SCREW SET 5/16-18 SKT KP X 3/8 COLLAR LOCK 7/8 HEX LOCK COLLAR, 7/8 HEX W/ SET SC COUPLER SHEAR PIN ROLL 1/4 X 1 1/2 LG PLT SHAFT COUNTER 6-30 SHAFT COUNTER 8-30 SHAFT DRILL 6-30 SHAFT DRILL 8-30 Shown. Includes items 17 thru /21/ P Rev.A
16 Transmission P Rev.A /21/09
17 Transmission Drives Ref. Part No. Part Description Comments Revision dwg C C D C C V H C C C C D D C C C C D C C C H C D S S L D C D D D D C C C D D Image No. CHAIN, #40 72P W/CONN SPKT 40C23 X 7/8 HEX BORE SHAFT, TRANSMISSION WASHER MACH 1.50 X 1.00 X 18GA PIN ROLL 1/4 X 1 1/2 LG PLT BEARING.880 HEX BORE 205DD TRANSMISSION WELD WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X7/8 GR5 NUT-HEX 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT SLEEVE LEVER MOUNT LEVER IDLER SPRING WASHER FLAT 1/4 SAE PLT HHCS 1/4-20X1 GR5 SPRING EXT 7/8ODX4.468X.1W CCOUPLER 3/8-16 X 1 3/4 FIRMING WHL, MOUNTING COLLAR PRESS WHEEL ARM PIVOT BUSHING NUT LOCK 3/8-16 PLT SPKT 41B24 X.750 RD BORE IDLER WELD, TRANSMISSION NO T IDLER SPKT. IDLER BOLT IDLER ASSY, SPKT IDLER ASSY TRANSMISSION TRANSMISSION ASSY COUPLER SHEAR PIN COTTER 1/4 X 2 PLT SHAFT COUNTER 6-30 SHAFT COUNTER 8-30 SHAFT DRILL 6-30 SHAFT DRILL 8-30 HHCS 5/16-18X3/4 GR5 NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT COUPLER, SHEAR OUTPUT LEVER IDLER SPRING (January 1996+) (December 1995-) (January 1996+) (December 1995-) 2nd rev. 1st rev. 2nd rev. 1st rev. 10/21/ P Rev.A
18 Sprocket Storage & Transmission Shield P Rev.A /21/09
19 Drives Sprocket Storage & Transmission Shield Ref. Part No. Part Description Comments Revision dwg C C H S C C C C C C C C S H C C C C C C C C Image No. NUT HEX JAM 3/8-16 PLT KNOB, TRANS. SHIELD SHIELD WELD, TRANSMISSION TRANSMISSION SHIELD ASSY HHCS 3/8-16X3/4 GR5 RPBY C U-BOLT 3/4-10 CORNER 7 SQ WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT SPRKT STORAGE ASSY SPRKT STORAGE WELD SPKT 40C17 X 7/8 HEX BORE SPKT 40C28 X 7/8 HEX BORE SPKT 40C27 X 7/8 HEX BORE SPKT 40C26 X 7/8 HEX BORE SPKT 40C25 X 7/8 HEX BORE SPKT 40C24 X 7/8 HEX BORE SPKT 40C19 X 7/8 HEX BORE PIN LINCH 1/4 X 1 3/4 PLT Includes items 2 & 3. Includes items 13 thru 21. 2nd rev. use existing stock; 1st rev. 10/21/ P Rev.A
20 Decal Placement P Rev.A /21/09
21 Decals Decal Placement Ref. Part No. Part Description Comments Revision dwg C C C C C C C C C C C C C Image No. DECAL GREASE 50 HRS LH DECAL GREASE 50 HRS RH DECAL GREAT PLAINS PLANTER DECAL 8040 PLANTER DECAL 8038 PLANTER DECAL 8036 PLANTER DECAL 1030 PLANTER DECAL CAUTION OPERATIONAL MACH DECAL SLOW MOVING-GALV. BACKED DECAL WARNING 20 MPH TRANS LRG DECAL AMBER REFLECTOR DECAL RED REFLECTOR DECAL AG CHEMICALS DANGER 10/21/ P Rev.A
22 Flat Fold Marker P Rev.A /21/09
23 Flat Fold Marker Options Ref. Part No. Part Description Comments Revision dwg C C S S C D H H C H C D C H C D D D C C H C D H H C C E S H C C Image No. WASHER FLAT 1/2 USS PLT HHCS 1/2-13X3 1/2 GR5 RPBY S RPBY S NUT LOCK 1/2-13 PLT MARKER TUBE 42 IN LONG 8 ROW WIDE 2ND STAGE ARM WMNT 2ND STAGE MOUNT WMNT NUT LOCK 3/8-16 PLT 2ND STAGE MOUNT PIN WMNT HHCS 3/8-16X1 1/2 GR5 1ST STAGE MOUNTING PIN CYL 2.5X10X1.12 ROD (TIE) PLANTER MARKER MOUNT WMNT PIN ROLL 1/4 X 1 1/2 LG PLT C LUG PIN CYLINDER SPACER W/ HOLE CYLINDER SPACER SCREW SET 1/4-28X1/4 KNL CUP THREAD PROTECTOR - DELRIN CYLINDER TANG WMNT 1 1/4 X 1 X 3/4 HDR BUSHING CYLINDER LINK PIN 1ST STAGE ARM WMNT CYL. PIVOT PIN WMNT GREASE ZERK STRAIGHT 1/4-28 PIN COTTER 1/4 X 2 PLT PIVOT LINK WMNT WIDE ROW MKR PIVOT LINK ASSY TRANSFER LINK WMNT O-RING 1 ID X 1 1/4 OD X 1/8 U-BOLT 1/ /32 X 2 3/4 (January 1996+) Refer to "Marker Disk Assembly January 1996+)" for breakdown. (December 1995-) Refer to "Marker Disk Assembly (December 1995-)" for breakdown. Refer to "Marker Hydraulic Cylinder ( C)" for breakdown. 2nd rev. 1st rev. 10/21/ P Rev.A
24 Marker Disk Assembly (January 1996+) P Rev.A /21/09
25 Options Marker Disk Assembly (January 1996+) Ref. Part No. Part Description Comments Revision dwg S H C C C C C C C C C C C H Image No. RPBY S 1 SPINDLE MARKER WELDMENT PIN COTTER 5/32 X 1 PLT TINE GAUGE WHEEL HUB SEAL BRG CONE 1.00ID L44643 BRG CUP 1.98OD L44610 RPBY BO-47 WASHER FLAT 3/4 SAE PLT NUT HEX SLOTTED 3/4-16 RPBY C NUT LUG 1/2-20X60DEG PLT(.75AF TINE GW HUB 16 4-BOLT NOTCHED MARKER DISK DEPTH BAND 12 4-BOLT 10/21/ P Rev.A
26 Marker Disk Assembly (December 1995-) P Rev.A /21/09
27 Options Marker Disk Assembly (December 1995-) Ref. Part No. Part Description Comments Revision dwg S H C C C C C C C C C C H C Image No. RPBY S MARKER DISK SPINDLE WELDMENT SEAL 1 X X.469 BRG CONE.75IDX.65WD #LM11949 BRG CUP 1.78ODX.46WD #LM11910 RPBY S GREASE CAP X.89 RPBY S WASHER FLAT 5/8 SAE PLT NUT HEX SLOTTED 5/8-18 PLT PIN COTTER 5/32 X 1 1/4 LG 14 4-BOLT MARKER DISK DEPTH BAND 10 4-BOLT 4B.C. HHCS 1/2-20X1 GR5 Refer to "Marker Disk Assembly (January 1996+)". 10/21/ P Rev.A
28 Marker Hydraulics P Rev.A /21/09
29 Options Marker Hydraulics Ref. Part No. Part Description Comments Revision dwg C C C C C C C Image No. CYL 2.5X10X1.12 ROD (TIE) EL 9/16MJIC 9/16MORB HH1/4R /16FJIC HH1/4R /16FJIC 1/2MPTM VALVE,SEQUENCE SHOEMAKER WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 Refer to "Marker Hydraulic Cylinder ( C)" for breakdown. Refer to "Marker Sequence Valve ( C)" for breakdown. 10/21/ P Rev.A
30 Marker Hydraulic Cylinder ( C) P Rev.A /21/09
31 Options Marker Hydraulic Cylinder ( C) Ref. Part No. Part Description Comments Revision dwg A0022 4M3102 BACK-UP 3R0310 2A0012 2M3393 5M3118 7M3318 6R0154 2A C C Image No. RPBY C RPBY 4M3108 Only available in item 15. O-RING MW HEAD RPBY C O-RING BACK-UP WIPER SEAL MW ROD MW TUBE MW TIE ROD BASE MIDWAY MW PLUG SEAL KIT MW 2.5 CYL 3A3102 CYL 2.5X10X1.12 ROD (TIE) Only available in item 15. Only available in item 15. Only available in item 15. Only available in item /21/ P Rev.A
32 Marker Sequence Valve ( C) P Rev.A /21/09
33 Options Marker Sequence Valve ( C) Ref. Part No. Part Description Comments Revision dwg C Image No. SHOEMAKER BODY MKR SEQ VALVE SHOEMAKER O-RING SHOEMAKER PLUG, HEX SOCKET SHOEMAKER NEEDLE,FLOW CONTROL SHOEMAKER.125 SPRING PIN SHOEMAKER SPRING COMPRESSION RPBY RPBY SEAL KIT SHOEMAKER SCREW, FLOW CON.ADJ. SHOEMAKER HEX, JAM NUT Z PLTD. RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT RPBY SEAL KIT SHOEMAKER O-RING SHOEMAKER FITTING PORT ADPT. SHOEMAKER HEX,SKT O-RING PLUG SHOEMAKER O-RING SHOEMAKER SAE #6 TO #6 STRGHT RPBY SHOEMAKER SPOOL,MKR SEQ..055 VALVE,SEQUENCE SHOEMAKER 2nd rev. use existing stock; 1st rev. 10/21/ P Rev.A
34 Marker Stand P Rev.A /21/09
35 Marker Stand Options Ref. Part No. Part Description Comments Revision dwg H D C C C C C C Image No. MARKER STAND WELDMENT MARKER PLATE NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 5/8-11 X 7 1/32 X 8 U-BOLT 3/8-16 X 2 X 2 3/4 10/21/ P Rev.A
36 Terra Tine Unit Mount P Rev.A /21/09
37 Options Terra Tine Unit Mount Ref. Part No. Part Description Comments Revision dwg K K C C D C H H C C C S S C H H D D C D D C H H C C C Image No. TERRA-TINE WHEEL RH TERRA-TINE WHEEL LH WASHER 1 1/4 X 3/4 X 18 GA PLT HHCS 3/4-10X1 1/2 GR5 DD BRG FLANGE DUST COVER NUT HEX FLG. LOCK 1/2-13 PLT. GP TERRA-TINE BRACKET RH GP TERRA-TINE BRACKET LH HHCS 1/2-13X1 1/4 GR5 DECAL SHARP OBJECT WARNING RPBY C PIVOT ASSEMBLY RH PIVOT ASSEMBLY LH RHSNB 1/2-13X1 1/2 GR5 ARM SHAFT WELDMENT RH ARM SHAFT WELDMENT LH SPRING TERRA-TINE LEFT ASSY SPRING TERRA-TINE RIGHT ASSY NUT HEX FLANGE 3/8-16 PLT TERRA-TINE SPRING ADJUSTER RH TERRA-TINE SPRING ADJUSTER LH PARALLEL ARM PIVOT BUSHING PIVOT MOUNT WELDMENT RH PIVOT MOUNT WELDMENT LH RHSNB 3/8-16X1 GR5 WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING 3/4 EXTERNAL HEAVY Refer to "Terra Tine Wheel Assembly" for breakdown. Refer to "Terra Tine Wheel Assembly" for breakdown. 10/21/ P Rev.A
38 Terra Tine Wheel Assembly P Rev.A /21/09
39 Options Terra Tine Wheel Assembly Ref. Part No. Part Description Comments Revision dwg C C D C C D C V C C Image No. NUT HEX FLANGE 1/4-20 PLT NUT HEX FLANGE 3/8-16 PLT TERRA-TINE FLANGE BACK SPRING TERRA-TINE FINGER SPRING TERRA-TINE FINGER 15 TERRA-TINE FLANGE FRONT RHSNB 3/8-16X3/4 GR5 BEARING.760 BORE 205DD HSG RIBB FLG 6BOLT PLT HHCS 1/4-20X5/8 GR5 10/21/ P Rev.A
40 The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page K...11, H H H S...23, D H D D D D H H H D H H H E H D S H H S...23, D...11, 15, V...9, 15, V D D H D H D H H S D S K D K A A A M R D H H H H D S L S S S S S S S...11, D H D H D D S H H H H H S H D H S S H H H D...11, H D...11, 15, S D D D D...11, H D D S D D D D...15, D...15, D D...15, D...15, D...15, D D D D D D D D D H H M M R M C...9, 13, C C C C...7, C C...19, C C...7, 15, C C...9, C C C C C C C C C C C...11, C C C...11, 15, C C C...7, C...7, C C...11, 15, 17, C...7, 15, 19, C C C...9, C...7, C...9, C C...37, C C C C C C C C...7, C C...7, 13, C C... 7, 11, 15, 17, 19, 29, C C C C...7, C...9, 11, C C C...11, C C C C...17, C C C C C C...9, 11, 15, 17, C C C...9, C C C C C C C C C C C C C C C C C C C C C C C C C...23, 29, C...29, C C C C C C C C C C C C C C...11, 15, C C...11, C C C C...7, C C C C C C C C C C C C C C C C C C C C P Rev.A /21/09
41 (continued) Part Number Page C C C C C C C C C...39 BACK-UP...31 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg HA WB /21/ P Rev.A
42 Great Plains Mfg., Inc E. North Street Salina, Kansas USA
Parts Manual. Lister-Cultivator LC25. Copyright 2017 Printed 06/28/ P
Table of Contents Parts Manual LC25 Lister-Cultivator Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
Parts Manual. Levee Seeder LS10 & LS12. Copyright 2018 Printed 04/19/ P
Table of Contents Parts Manual LS10 & LS12 Levee Seeder Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
Parts Manual. Center Pivot Hitch CPH-12, CPH-15, & CPH-20. Copyright 2017 Printed 03/27/ P
Table of Contents Part Number Index Parts Manual CPH-12, CPH-15, & CPH-20 Center Pivot Hitch 1994+ Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Click Here To View Item at
Click Here To View Item at www.gappower.com Primary Seeder PS1548 & PS1572 21491 313-164P Parts Manual Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Parts Manual. 30' High Clearance Full Press Drill. No Image Copyright 2007 Printed 12/26/ P
Table of Contents Part Number Index Parts Manual 1980-1985 30' High Clearance Full Press Drill No Image Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Parts Manual. Three-Point Soybean Machine 1515, 2015, & Copyright 2016 Printed 11/08/ P
Table of Contents Part Number Index Parts Manual 1515, 2015, & 2515 Three-Point Soybean Machine Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are
Parts Manual. All Seeds Hitch AS-15 & AS-20. Copyright 2016 Printed 11/07/ P
Table of Contents Part Number Index Parts Manual AS-15 & AS-20 All Seeds Hitch 1994-1999 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Rear Blades RB3672, RB3684 & RB P Parts Manual. Copyright 2013 Printed 04/18/13
Rear Blades RB3672, RB3684 & RB3696 33389 301-388P Parts Manual Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Parts Manual 2020F, 2025F, 2520F & 2525F. 20' & 25' 3-Point Drill. Copyright 2017 Printed 08/29/ P
Table of Contents Part Number Index Parts Manual 20' & 25' 3-Point Drill 2020F, 2025F, 2520F & 2525F Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Parts Manual. Sub-Soiler Inline Ripper SS1300 & SS1700. Copyright 2017 Printed 06/28/ P
Table of Contents Part Number Index Parts Manual SS1300 & SS1700 Sub-Soiler Inline Ripper Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Parts Manual. Model SRU1999/SR5030 S/N KK1000, S/N KK1005, S/N KK1006, S/N KK1010 and later. Planter Row Unit RU1999 and SRU1999
Table of Contents Parts Manual Planter Row Unit RU1999 and SRU1999 Model SRU1999/SR5030 S/N KK1000, S/N KK1005, S/N KK1006, S/N KK1010 and later Read the Operator's manual entirely. When you see this symbol,
Parts Manual SS1800 & SS2000. Sub-Soiler Inline Ripper. Copyright 2017 Printed 08/07/ P
Table of Contents Part Number Index Parts Manual Sub-Soiler Inline Ripper SS1800 & SS2000 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Rear Blades RB05, RB15 & RBT P Parts Manual. Copyright 2015 Printed 01/15/16
Rear Blades RB05, RB15 & RBT15 10335 301-143P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Moldboard Plows MP10 & MP P Parts Manual. Copyright 2018 Printed 07/10/18
Table of Contents Moldboard Plows MP10 & MP20 39522 307-244P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Parts Manual 850TM & 1000TM. Turbo Max. Copyright 2017 Printed 06/12/ P
Table of Contents Part Number Index Parts Manual Turbo Max 850TM & 1000TM Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Parts Manual. 2700, 3000 and 3700 Drills. Three-Point Drills. Copyright 2018 Printed 09/24/ P-A
Table of Contents Part Number Index Parts Manual Three-Point Drills 2700, 3000 and 3700 Drills Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are
Parts Manual SS0300. Sub-Soiler Inline Ripper. Copyright 2017 Printed 01/18/ P
Table of Contents Part Number Index Parts Manual Sub-Soiler Inline Ripper SS0300 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow
Parts Manual. 500, 750 & 1000 Gallon. Semi Mounted Cart. Copyright 2017 Printed 02/06/ P
Table of Contents Parts Manual Semi Mounted Cart 500, 750 & 1000 Gallon Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Parts Manual. Precision Hitch Precision Fertilizer Hitch PH-15, PH-20, PFH-15, & PFH-20. Copyright 2017 Printed 10/11/ P
Table of Contents Part Number Index Parts Manual PH-15, PH-20, PFH-15, & PFH-20 Precision Hitch Precision Fertilizer Hitch Read the Operator's manual entirely. When you see this symbol, the subsequent
Parts Manual END-WHEEL NO-TILL DRILL 705 S/N 1631Q+; 1005 S/N 4569U+ 705 and Copyright 2017 Printed 02/22/ P
Table of Contents Part Number Index Parts Manual 705 and 1005 END-WHEEL NO-TILL DRILL 705 S/N 1631Q+; 1005 S/N 4569U+ Read the Operator's manual entirely. When you see this symbol, the subsequent instructions
Parts Manual. 3-Point Drills 1510HDF, 2010HDF & 2510HDF. Copyright 2017 Printed 11/20/ P
Table of Contents Part Number Index Parts Manual 1510HDF, 2010HDF & 2510HDF 3-Point Drills Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Parts Manual 3SF No Image. 30' 3-Section Drill. Copyright 2018 Printed 04/11/ P
Table of Contents Part Number Index Parts Manual 30' 3-Section Drill 3SF30 1991-1995 No Image Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are
S-Tine Field Cultivator
S-Tine Field Cultivator FC15 39539 307-224P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Parts Manual Fluted, 2020 Fluted, 2420 Fluted. 15', 20' & 24' 3-Point Drills. Copyright 2017 Printed 02/21/ P
Table of Contents Part Number Index Parts Manual 15', 20' & 24' 3-Point Drills 1520 Fluted, 2020 Fluted, 2420 Fluted Read the Operator's manual entirely. When you see this symbol, the subsequent instructions
Parts Manual. 12', 15', & 20' 3-Point Drill , 1210, 1220, 1500, 1510, 1520, 2000, 2010 & Copyright 2018 Printed 12/27/ P
Table of Contents Part Number Index Parts Manual 1200, 1210, 1220, 1500, 1510, 1520, 2000, 2010 & 2020 12', 15', & 20' 3-Point Drill 1994+ Read the Operator's manual entirely. When you see this symbol,
Parts Manual. 7' & 10' End Wheel No-Till Drill EWNT7 & EWNT10. Copyright 2011 Printed 01/19/ P
Table of Contents Part Number Index Parts Manual EWNT7 & EWNT10 7' & 10' End Wheel No-Till Drill 1994-1998 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and
Parts Manual 2015P & 2515P. 3-Point Precision Bean Machine. Copyright 2016 Printed 11/08/ P
Table of Contents Parts Manual 3-Point Precision Bean Machine 2015P & 2515P Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow
Parts Manual. 3-Point Native Grass 3PNG12' & 3PNG15' Copyright 2018 Printed 12/20/ P
Table of Contents Part Number Index Parts Manual 3PNG12' & 3PNG15' 3-Point Native Grass Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Parts Manual. SD2600, SD3000, & SD3300 Updated. Short Disk Update Copyright 2018 Printed 10/15/ P
Table of Contents Part Number Index Parts Manual Short Disk Update 2018 SD2600, SD3000, & SD3300 Updated Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Parts Manual. 24' & 30' 2-Section Native Grass 2SNG24 & 2SNG30. Copyright 2017 Printed 12/28/ P
Table of Contents Part Number Index Parts Manual 2SNG24 & 2SNG30 24' & 30' 2-Section Native Grass Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Parts Manual 1200TM & 1500TM. Turbo Max (S/N C2411H+) Copyright 2017 Printed 04/17/ P
Table of Contents Part Number Index Parts Manual Turbo Max (S/N C2411H+) 1200TM & 1500TM Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Quick Hitch QH05, QH10, QH15, QH20 & QH P Parts Manual. Copyright 2018 Printed 01/19/18
Quick Hitch QH05, QH10, QH15, QH20 & QH30 22131 320-003P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without
Parts Manual 3N-4010, 3N-4010HDF & 3N No Till-Drill. Copyright 2018 Printed 05/08/ P
Table of Contents Part Number Index Parts Manual No Till-Drill 3N-4010, 3N-4010HDF & 3N-4020 Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are
RCR1242, RCR1248, RCR1260 & RCR1272
Rotary Cutter RCR1242, RCR1248, RCR1260 & RCR1272 30287 326-047P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow
Parts Manual. Precision Seeding System 2510HDP. Copyright 2016 Printed 11/28/ P
Table of Contents Parts Manual 2510HDP Precision Seeding System Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Parts Manual 2010P & 2020P. Precision Seeding System. Copyright 2016 Printed 11/02/ P
Table of Contents Part Number Index Parts Manual Precision Seeding System 2010P & 2020P Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Trencher AP-TR48 & AP-TR PK Parts Manual. Copyright 2019 Printed 04/22/19
Trencher AP-TR48 & AP-TR60 70823 350-234PK Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
Snow Blowers SB1574 S/N P Parts Manual. Copyright 2015 Printed 03/17/15
Snow Blowers SB1574 S/N 881640-33099 370-126P Parts Manual Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Parts Manual. 24' & 30' 2-Section Drill SF24 & 2SF30. Copyright 2017 Printed 07/31/ P
Table of Contents Part Number Index Parts Manual 2SF24 & 2SF30 24' & 30' 2-Section Drill 1986+ Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are
Parts Manual 3N-3010P & 3N-3020P. 3-S No-Till Singulating 30' Copyright 2016 Printed 04/04/ P
Table of Contents Part Number Index Parts Manual 3-S No-Till Singulating 30' 3N-3010P & 3N-3020P Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings
Ripper Shanks RS15 & RS P Parts Manual. Copyright 2018 Printed 07/10/18
Ripper Shanks RS15 & RS20 39356 307-232P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
HP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
6-ROW PEANUT DIGGER-SHAKER-INVERTER (6-31, 6-36, 6-38 & 6-40)
6-ROW PEANUT DIGGER-SHAKER-INVERTER (6-31, 6-36, 6-38 & 6-40) (FOR MACHINES PRIOR TO 2002) 03-SERIES KELLEY MANUFACTURING CO. 80 Vernon Drive / Zip 31794 P.O. Drawer 1467 / Zip 31793 Tifton, GA Tel: 229-382-9393
Parts Manual. 3-Point No-Till Drill 3P1006NT. Copyright 2018 Printed 09/27/ P
Table of Contents Parts Manual 3P1006NT 3-Point No-Till Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
PARTS LISTING WR
13 ST624E 1.1998 PARTS LISTING 601 00 23-71 WR 01-07-98 ST624 Engine Assembly 9 12 13 41 43 44 51 53 31 33 34 53 58 58 59 60 57 63 60 67 68. AUGER FRAME. PULLEY 69. PULLEY 10 - ENGINE, 6HP (See Engine
PARTS LISTING WR
13 ST 824E 1.1998 PARTS LISTING 601 00 23-16 WR 02-02-98 ST824 Electric Starter Assembly 8 9 10 6. ENGINE 6 601 00 15 88 MOTOR, STARTER 7 601 00 15 89 SCREW, 1/4-20X.50 8 60 100 15 90 SCREW, #6-32X2.50
Parts Manual. Air Drill Cart ADC2350 & ADC2350B. Copyright 2018 Printed 10/02/ P
Table of Contents Part Number Index Parts Manual ADC2350 & ADC2350B Air Drill Cart Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious -
2-ROW AND 4-ROW PEANUT DIGGER-SHAKER-INVERTER (4-31, 4-36, 4-38 & 4-40)
2-ROW AND 4-ROW PEANUT DIGGER-SHAKER-INVERTER (4-31, 4-36, 4-38 & 4-40) (FOR MACHINES PRIOR TO 2002) 03-SERIES KELLEY MANUFACTURING CO. 80 Vernon Drive / Zip 31794 P.O. Drawer 1467 / Zip 31793 Tifton,
Parts Manual. Precision Seeding System 1510HDP & 1525P. Copyright 2016 Printed 11/02/ P
Table of Contents Part Number Index Parts Manual 1510HDP & 1525P Precision Seeding System Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
Parts Manual (2010HDP 2007+) & (2025P 2006-) Precision Seeding System. Copyright 2016 Printed 11/02/ P
Table of Contents Part Number Index Parts Manual Precision Seeding System (2010HDP 2007+) & (2025P 2006-) Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and
31AE660G022 Snow Thrower 1028 (2002) Page 1 of 13 Belt Drive & Engine Accessories
31AE660G022 Snow Thrower 1028 (2002) Page 1 of 13 Belt Drive & Engine Accessories 31AE660G022 Snow Thrower 1028 (2002) Page 2 of 13 Belt Drive & Engine Accessories 1 710-1652 1 /P Hex Washer Screw 1/4-20
31AH9Z74597 (2008) Page 1 of 16 Auger & Auger Housing
31AH9Z74597 (2008) Page 1 of 16 Auger & Auger Housing 31AH9Z74597 (2008) Page 2 of 16 Auger & Auger Housing 1 736-0159 1 S Flat Washer.349 ID x.879 OD x.063 2 714-0104 1 S Int. Cotter Pin 3 754-0222A 1
ST927E Spare Parts
ST927E 1996-01 Spare Parts ELECTRIC START REPAIR PARTS 9 8 7 6 6 601 00 15-88 MOTOR, STARTER TEC. 120V 7 601 00 15-89 SCREW 1/4-20X.50 HWASEMSTOR 8 601 00 15-90 SCREW #6-32 X 2.50 9 601 00 15-91 CORD,
PEANUT DIGGER-SHAKER-INVERTER
03-SERIES 6-ROW PEANUT DIGGER-SHAKER-INVERTER (6-31, 6-36, 6-38 & 6-40) PART NO. 03-PB-07 Printing Date JUN 2014 TABLE OF CONTENTS GEAR BOXES, 6R 1000 RPM... 2-3 GEAR BOXES, SHIELDS... 3 DRIVELINE, 1
1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
21AE662M cc Elec Roto-Tiller (2008) Page 1 of 13 Drive System
21AE662M066 250cc Elec Roto-Tiller (2008) Page 1 of 13 Drive System 21AE662M066 250cc Elec Roto-Tiller (2008) Page 2 of 13 Drive System 1 710-0331 1 /P Hex Screw, 3/8-24 x 2.25 Model 662 1 710-0539 1 /P
13BH660F009 YM-1338 (2001) Page 1 of 25 Axle & Wheels Front, Steering
13BH660F009 YM-1338 (2001) Page 1 of 25 Axle & Wheels Front, Steering 13BH660F009 YM-1338 (2001) Page 2 of 25 Axle & Wheels Front, Steering 1 731-0220 1 S Steering Wheel Cap 731-1459A 1 /P Steering Wheel
31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly
31AE9P6J590 SB-945 (2005-2) Page 1 of 16 Auger Assembly 31AE9P6J590 SB-945 (2005-2) Page 2 of 16 Auger Assembly 1 712-0717 1 Nut Insert 3/8-16 UNC 2 712-04063 1 /P Hex Flg. L-Nut 5/16-18 Gr. F Nylon 3
Parts Manual. No-Till Air Drill NTA607HD & NTA2007HD. Copyright 2018 Printed 10/01/ P
Table of Contents Part Number Index Parts Manual NTA607HD & NTA2007HD No-Till Air Drill Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Rotary Cutters. RC2512 S/N & RC2512 Series 2 S/N P Parts Manual. Copyright 2018 Printed 07/10/18
Rotary Cutters RC2512 S/N 945550- & RC2512 Series 2 S/N 945551+ 30649 330-725P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious
PARTS MANUAL 2016 DEFOLIATOR ROW TH Avenue North Fargo, ND Phone: (701) Fax: (701)
PARTS MANUAL 0 DEFOLIATOR 70 ROW 00 7 TH Avenue North Fargo, ND 0 Phone: (70) - Fax: (70) -7 www.amitytech.com 00 TABLE OF CONTENTS HITCH ASSEMBLY. - DRIVE TRAIN - # FLAILS 7-0 # FLAILS - FLAIL TUBE ASSEMBLY
F60 MT Triple Stage Mast
P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. F60 MT Triple Stage Mast FOR PARTS AND SERVICE: TELEPHONE: (888) 946-3330
21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 1 of 13 Drive System
21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 1 of 13 Drive System 21C-64M1066 Bronco CRT Roto-Tiller (2008) Page 2 of 13 Drive System 1 656-04023A 1 Engine Pulley Bronco 1 656-04005A 1 /P Engine Pulley
ZTR. English. Please read the operator s manual carefully and make sure you understand the instructions before using the
RAM SERIES ZTR Parts manual RAM, B&S/, RAM 0, B&S/, RAM, HONDA/, RAM MAG, 0 KOH/0, RAM MAG 0, KAW/, RAM MAG 0, O HONDA/, RAM MAG 0, 0 KOH/ Please read the operator s manual carefully and make sure you
12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls
12A-979U190 LC-210SS (2001) Page 1 of 9 Cable Controls 12A-979U190 LC-210SS (2001) Page 2 of 9 Cable Controls 1 746-0939 1 S 6 Spd. Cable 2 656-0613 1 S Pulley Ass'y Multi-Spd. 3 710-0167 1 /P Scr. 1/4-20
03-SERIES 4 & 6-ROW FLEX DIGGER-SHAKER-INVERTER (CHAIN & BELT MODELS)
03-SERIES 4 & 6-ROW FLEX DIGGER-SHAKER-INVERTER (CHAIN & BELT MODELS) PART NO. 03-PB-08 PRINTING DATE: AUG 2015 TABLE OF CONTENTS 4-ROW FLEX INVERTER MAIN FRAME WITH TOOL BAR...2-3 FLEX INVERTER TURNBUCKLE...3
13AV60KG011 Bronco (2009) Page 1 of 23 Drive System
13AV60KG011 Bronco (2009) Page 1 of 23 Drive System 13AV60KG011 Bronco (2009) Page 2 of 23 Drive System 1 17840-0637 1 /P Mounting Bracket, Trans-axle 2 925-04039 1 /P Switch, Interlock 3 17962 1 Plate,
03-SERIES FOR CHAIN & BELT CONVEYOR MACHINES
0-SERIES FOR CHAIN & BELT CONVEYOR MACHINES PART NO. 0-PB- PRINTING DATE: APR 0 TABLE OF CONTENTS -ROW MAIN FRAME STANDARD SHANKS BLADES, CUT RODS & FROGS - X COULTER BRACKET OUTSIDE COULTER BRACKET DSI
HARDWARE KITS. Call in NY or Fax Outside the NY area, JCP. HARDWARE A F JCP
112 KITS 29601-000 10-229602-000 12-10 0166-015 12-100166-016 12-10 12-860331-A 0166-031 12-100166-032 12-15 230000-001 11-23001-001 11-23002-0 12-860331-B 12-860331-C 12-860331-D 12-860331-E 12-860331-F
SCRAMBLER 50 Model #A02EA05CA Rev. 01. E 2001 Polaris Sales Inc. PARTS MANUAL PN and MICROFICHE PN /02
SCRAMBLER 0 Model #A0EA0CA Rev. 0 E 00 Polaris Sales Inc. PARTS MANUAL PN 0 and MICROFICHE PN /0 Thispageleft intentionallyblank. TABLE OF CONTENTS Scrambler 0 A0EA0CA Parts Manual A AIR CLEANER... AXLE,
John Deere. MODEL: 510 Round Baler JD-P-PC1599
John Deere MODEL: 510 Round Baler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch
14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch 14AZ809H063 GTX2446 (2003) Page 2 of 26 Deck Assembly H 46 Inch 1 17982-0637 1 /P Spindle Reinforcement Plate 2 918-0430B 1 S Spindle Assembly,
1/2
http://partsradar.arinet.com/scripts/empartisapi.dll?mf&app=ariens&session=27f5776d-d5a8-4417-865b-d472735c5bb5&cat=2&assem=4658&imgma 1/2 Ref # Par t # Descr iption Context Note Foot Note Min Qty UOM
Page 3. Page Page 4. Page 5. Page 6. Page 2. Page 7
Parts manual Verti-Drain 416 Page 01 Code 1640 TM Page 3 Page -10 Page 4 Page Page 6 Page 2 Page Page 8 Page : PTO Page : Tines, adapters and turf hold down kits Page 13: Optional core collector Page
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 2 of 22 Deck Lift & Controls Ref # Part Number Qty S/P/F Description 1 603-04160B 1
RL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
POULTRY HOUSE CLEANER STANDARD & LOW PROFILE (4200 & 4200LP)
POULTRY HOUSE CLEANER STANDARD & LOW PROFILE (4200 & 4200LP) TO BE USED FOR MACHINES PRIOR TO 2002 42-SERIES KELLEY MANUFACTURING CO. 80 Vernon Drive / Zip 31794 P.O. Drawer 1467 / Zip 31793 Tifton, GA
03-SERIES WITH GEARBOX & HYDRAULIC MOTOR OPTIONS
0-SERIES WITH GEARBOX & HYDRAULIC MOTOR OPTIONS PART NO. 0-PB- PRINTING DATE: JUN 0 TABLE OF CONTENTS R WINDROWER MAIN FRAME STANDARD SHANKS & STRAIGHT BLADE & WINDROWER TINE ASSY - KNOCKER WHEEL ASSEMBLY
SG cc honda. PN: Rev Companion to SN Range: A04843
STUMP GRINDER SG30-30cc honda PARTS manual PN: 23 Rev 200 Companion to 23 SN Range: 06 - A03 Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear
RZT54 Kawasaki (2010 & After) Page 1 of 55 Deck Lift & Controls
RZT54 Kawasaki (2010 & After) Page 1 of 55 Deck Lift & Controls RZT54 Kawasaki (2010 & After) Page 2 of 55 Deck Lift & Controls 1 603-04160B-0637 1 /P Deck Lift Shaft Assembly 2 603-04322-0637 1 Lapbar
Husqvarna X4000. Illustrated Parts List Jun 2009
Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT
PARTS BOOK DIAMOND DISC 3PT HITCH MOUNT
PARTS BOOK DIAMOND DISC 3PT HITCH MOUNT DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION
13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories
13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories 13AN77KG011 Pony (2009) Page 2 of 21 Engine Accessories 1 683-04549-0637 1 /P Muffler Shield Assembly with Weld 2 710-0227 1 /P Screw, 8-18 x.500
Redexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202
Redexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202 Part# 1300 Part# 1700 Part# 2100 DESCRIPTION REMARKS QUA 1 844.060.060 Same Same Winged nut - M6 10 2 830.060.060 Same Same Self lock nut
m a g n u m ha r v e s t e r t h r e e an d fi v e ga n g as s e m b l y (Three Gang), (Five Gang)
0 Nordic Drive Cedar Falls, Iowa 0 USA Phone:.00. Fax:.. t h r e e an d fi v e ga n g as s e m b l y 0000 (Three Gang), 000 (Five Gang) /Page Number A-Frame Assembly Front Gang Assembly Back Gang Assembly
Sno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA
Sno-Thro Parts Manual Models 0 - STLE 0 - STLE 0000A /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you
MK-2025SSP LPG CONCRETE SAW PARTS LIST & EXPLODED VIEWS
www.mkdiamond.com MK-05SSP LPG CONCRETE SAW PARTS LIST & EXPLODED VIEWS Revision 101 06.015 Manual Part# 16895-PM Caution: Read all safety and operating instructions before using this equipment. This parts
Husqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts.
Husqvarna X000E Illustrated Parts List -0 0 Jun 00 MAINFRAME ASSEMBLY 0 X000E 000 MAINFRAME ASSEMBLY, X000 000 SHSB, / x / 00 SHAFT, ARBOR LOCK 00 FRAME, ROLL CAGE, X000 0 COVER, BELT GUARD 00 COVER, BELT
Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401
Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401 1 4191100 Winged nut 10 2 4100800 Self lock nut M6 10 3 2282183 Bottom PTO protection cover 1 4 4001030 Bolt M6 x 16 10 5 2281782 Top PTO protection
MODELS MR44B & MR44K (See drawings below for additional parts)
MODELS MRB & MRK (See drawings below for additional parts) 0 Cup Washer $. 00 Wir e Lock Pin,." x.0" $. 00 Screw Pin Shackle Clevi s $. 00 Worm Drive Hose Clamp (-/" to -/" Clamping Dia.) $. 0 Single Split
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
3000M UT Page 1 of 28 Air Cleaner
3000M UT-26021 Page 1 of 28 Air Cleaner 3000M UT-26021 Page 2 of 28 Air Cleaner Ref # Part Number Qty S/P/F Description 175 GM240308 1 CLEANER ASSY Includes ref 178 thru 182 176 GM002811 1 SCREW & WASHER
RL-C20 PARTS LIST # G USE THIS PARTS LIST FOR: For older hoists use the following: Parts List No E for Serial Number 4200 to 14761
RL-C20 PARTS LIST # 102688G USE THIS PARTS LIST FOR: Hoist Serial Number 14762 to For older hoists use the following: Parts List No. 102688E for Serial Number 4200 to 14761 IF YOUR HOIST DOES NOT FALL
TX-3 TILE SAW OPERATION & PARTS MANUAL
www.mkdiamond.com TILE SAW OPERATION & PARTS MANUAL Revision 00 0.09.009 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all
Rear-Engine Riders Parts Manual
Rear-Engine Riders Parts Manual Models 06 - RM0 0 - RM0 0 - RM00 0 - RM 06 - RM0 06 - RM0 0 - RM 0 - RM 0 - RM0 0600B /0 Supercedes 0600,A Printed in USA THE MANUAL Before you operate your unit, carefully
PARTS MANUAL PN and MICROFICHE PN /03. PREDATOR 90 Model #A04KA09CA Model #A04KA09CB. E 2003 Polaris Sales Inc.
PARTS MANUAL PN and MICROFICHE PN /0 PREDATOR 0 Model #A0KA0CA Model #A0KA0CB E 00 Polaris Sales Inc. This page left blank intentionally. TABLE OF CONTENTS PREDATOR 0 A0KA0CA and PREDATOR 0 A0KA0CB Parts
13WX79KT011 Horse (2010) Page 1 of 21 Engine Accessories
13WX79KT011 Horse (2010) Page 1 of 21 Engine Accessories 13WX79KT011 Horse (2010) Page 2 of 21 Engine Accessories 1 683-04549-0637 1 /P Muffler Shield Assembly with Weld 2 710-0227 1 /P Screw, 8-18 x.500
4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL
0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. TONGUE & JACK. VIEWING PLATFORM. PILLOW BLOCK BEARING. TWO SPEED -. SHIFTERS. OIL RESERVOIR INSTALL -. DRIVELINE CONFIGURATIONS -. DRIVESHAFTS.