Parts Manual 850TM & 1000TM. Turbo Max. Copyright 2017 Printed 06/12/ P

Transcription

1 Table of Contents Part Number Index Parts Manual Turbo Max 850TM & 1000TM Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 06/12/ P

2 Table of Contents Table of Contents Part Number Index Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Hitch Assembly...6 Center Frame...8 Center Truss & Level Bar Assembly...10 Center Gang Bar Assembly...12 Lights & Decals...14 Section 3: Transport...16 Transport Assembly...16 Section 4: Hydraulics...18 Hydraulic Depth Control...18 Hydraulic Lift System...20 Hydraulic Cylinder ( C 3.75X10X1.38 ROD)...22 Hydraulic Cylinder ( C 3.25X2.5X1.25 ROD)...24 Section 5: Gangs...26 Turbo Gang Assembly...26 Section 6: Attachments...28 Rolling Harrow Assembly...28 Heavy Reel Following Rolling Harrow Assembly...30 Drag Mount Assembly...32 Section 7: Options...34 Hydraulic Gang Angle System, Optional...34 Weight Package, Optional...36 Part Number Index...38 Copyright 2017 All rights reserved Printed 06/12/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America P /12/17

3 Table of Contents Part Number Index Alphabetized Table of Contents Selected Models C Center Frame...8 Center Gang Bar Assembly...12 Center Truss & Level Bar Assembly...10 D Drag Mount Assembly...32 H Heavy Reel Following Rolling Harrow Assembly...30 Hitch Assembly...6 Hydraulic Cylinder ( C 3.75X10X1.38 ROD)...22 Hydraulic Cylinder ( C 3.25X2.5X1.25 ROD)...24 Hydraulic Depth Control...18 Hydraulic Gang Angle System, Optional...34 Hydraulic Lift System...20 L Lights & Decals...14 R Rolling Harrow Assembly...28 T Transport Assembly...16 Turbo Gang Assembly...26 W Weight Package, Optional /12/ P

4 Table of Contents P Part Number Index -4-06/12/17

5 Table of Contents Part Number Index 06/12/ P

6 Hitch Assembly Table of Contents Part Number Index P /12/17

7 Hitch Assembly Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H C C C C C C PPI-203VR PPI-205H PPI-302V C V D C C C C C D C C C C C C C C C C H C C C S C H D C H C H H C C C C C D D C D C C C C C Image No. HITCH FRAME 1800TM HHCS 1 1/4-7X8 GR8 PLT WASHER FLAT 1 1/4 SAE PLT NUT HEX TOP LOCK 1 1/4-7 PLT SQUARE SCREW JACK 5000LBS. HITCH BASE - CAT III & IV CAT V PERFECT HITCH V-BLOCK CUSHION TOP PLATE - CAT 3 HHCS 3/4-10X3 GR5 HITCH TONGUE CAT III ASSEMBLY SAFETY CHAIN SUPPORT HHCS 1-8X8 GR8 PLT SPTHD WASHER FLAT 1 SAE WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT HITCH CLEVIS W/BOLT SAFETY CHAIN LB HHCS 7/8-9X3 GR5 WASHER FLAT 7/8 SAE PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT SPRING HOSE LOOP HEAVY HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT BUSHING CYL 1 1/4 X 1 X 1 BUSHING SPINDLE 1 1/2X1 1/4X1 H - BRACKET PIN CLEVIS 1 X 2 29/64 USABLE WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 LEVEL TURNBUCKLE NUT HEX LOCK 1-8 PLT FRONT SHORT LEVEL BAR HHCS 1 1/4-7X8 1/2 GR8 SPTH HHB 1-8X6 GR8 PLT SPTHD TURNBUCKLE SUB ASSY RH THREAD NUT HEX JAM 1 1/2-12 PLT TURNBUCKLE SUB ASSY TURNBUCKLE SUB ASSY LH THREAD MANUAL PAK 1" W/GASKET HHCS 1/4-20X1 GR5 MINI END WHEEL PRESS WHEEL WASHER LOCK SPRING 1/4 PLT NUT-HEX 1/4-20 PLT TRNBCKLE WRENCH 2 5/ /16 GANG WRENCH 1 3/4 PIN LYNCH 3/16 W/COTTER/CHAIN HYD HOSE CLAMP BRACKET HHCS 5/16-18X5/8 HHCS 5/16-18X1 1/4 GR5 HHCS 5/16-18X2 1/4 GR5 WASHER LOCK SPRING 5/16 PLT HHCS 1-8X7 1/2 GR8 SPTHD PLT Includes items 6, DO NOT use if tractor drawbar has hammer strap. Will not work with cat V. Single set of Hoses Double set of Hoses Triple set of Hoses 06/12/ P

8 Center Frame Table of Contents Part Number Index P /12/17

9 Center Frame Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg H H H C D C S D D C C C C C C C C C C C C C C C C C Image No. CENTER FRAME TM TORQUE TUBE TM LIFT STRAP CYL REP 3.75X10X1.38 ROD (TIE) PLATE - TORCHED BUSHING CYL 1 1/4 X 1 X 1 CYLINDER MOUNT BAR TURBO MAX 4.25X10 CYL TRANSPORT LOCK SMV MOUNT DECAL SLOW MOVING-GALV. BACKED U-BOLT 1/2-13 X 3 1/32 X 6 PIN 1.25X5.79 USBL HRD PLT HHCS 3/8-16X2 1/4 GR8 SPTHD NUT HEX TOP LOCK 3/8-16 PLT PIN CLVS 1.0X3.13 USBL WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 HHCS 1-8X3 1/4 GR8 SPTHD HHCS 1-8X4 GR8 SPTHD NUT HEX LOCK 1-8 PLT PIN BENT.38X3.0 USBL W/PIN WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT SCREW PAN HD 1/4-20 X 3/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/4-13 PLT 06/12/ P

10 Table of Contents Center Truss & Level Bar Assembly Part Number Index P /12/17

11 Table of Contents Part Number Index Section 2: Frames Center Truss & Level Bar Assembly Ref. Part No. Part Description Comments Revision dwg H C C C C H C C C H C C H H C C C C C C Image No. HITCH TRUSS HHCS 3/4-10X2 GR5 HHCS 3/4-10X2 1/2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT LEVEL BAR 1200TM/1500TM PIN 1.0X8.67 USBL HRD PLT HHCS 3/8-16X2 1/4 GR 8 PLT NUT LOCK 3/8-16 NYLON INSERT LEVEL BAR SPRING ROD HHCS 3/4-10X2 GR8 SPRING COMP 4.5ODX1.125WX13L H - BRACKET SPRING GUIDE NUT HEX 1 1/2-6 PLT NUT HEX JAM 1 1/2-6 PLT BUSHING CYL 1 1/4 X 1 X 1 PIN CLVS 1.0X3.38 USBL WASHER MACH 1.5X1.00X.075 PIN COTTER 3/16 X 2 06/12/ P

12 Table of Contents Center Gang Bar Assembly Part Number Index P /12/17

13 Table of Contents Part Number Index Section 2: Frames Center Gang Bar Assembly Ref. Part No. Part Description Comments Revision dwg H H H H H H D C C C D C H S C C C C C C C C C C C D D C C D C C H H C H C S C C C C D Image No. GNAG BAR LH FRONT GANG BAR RH FRONT GANG BAR 1000 RH REAR GANG BAR 850 RH REAR GANG BAR 1000 LH REAR GANG BAR 850 LH REAR BOLT 1 1/4 X 12 1/8 WASHER FLAT 1 1/4 USS PLT NUT HEX SLOTTED 1 1/4-7 PIN COTTER 3/16 X TM BOTOM PLATE REAR DECAL TMX GAUGE ANGLE GAUGE TURNBUCKLE ASSEMBLY 1 1/4 X 1 X 3/4 HDR BUSHING WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT PIN CLEVIS 1 X 3 1/8 USABLE WASHER MACH 1.5X1.00X.075 RATCHET JACK - HD CYL REP 3.25X2.5X1.25 ROD(TIE) BRACKET HHCS 5/8-11X3 1/2 GR5 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT PLATE TORCHED PLATE TORCHED HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT TUBE RND HHCS 3/4-10X6 GR5 NUT HEX 3/4-10 PLT TURNBUCKLE TURNBUCKLE END PIN CLEVIS 1 X 3 1/4 USEABLE ANGLE GAUGE BKT U-BOLT 1/2-13 X 3 1/32 X 6 ADJUSTABLE LINK 14.50" NUT HEX TOP LOCK 3/8-16 PLT HHCS 3/8-16X1 1/4 GR5 3/8 ROD END 3/8-24 UNF RH THD 3/8 ROD END 3/8-24 UNF LH THD BAR RND - 3/8 THD Model 850 & 1000 Model 850 & 1000 Model 1000 (Shown) Model 850 Model 1000 (Shown) Model 850 Includes items Manual Gang Adjust Only (Standard) Hydraulic Gang Adjust (Optional) Includes items Used to attach adjustable link to angle gauge and gang bar. Used to attach adjustable link to angle gauge and gang bar. 06/12/ P

14 Lights & Decals Table of Contents Part Number Index P /12/17

15 Lights & Decals Table of Contents Part Number Index Section 2: Frames Ref. Part No. Part Description Comments Revision dwg C C C C C C C C H H C C C C C C C C C C C C C C C C C C C C C C C ImageNo LIGHT HARNESS, 30' LEAD LIGHT NARNESS, ENHANCE MODULE LIGHT HARNESS, WISHBONE LIGHT HARNESS, RED LAMP LIGHT HARNESS, AMBER LIGHT HHCS 1/4-20X1 1/4 GR5 NUT-LOCK 1/4-20 PLT CABLE TIE.19X D 50LB LIGHT BKT TM RH LIGHT BKT TM LH U-BOLT 1/2-13 X 5 1/32 X 4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DECAL REFLECTOR ORANGE 2X9 DECAL NOTICE TRANSPORT LOCK DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL DISK DEPTH CONTROL DECAL TURBO-MAX DECAL GP&LOGO HARVEST/3X20 DECAL TURBO MAX DECAL TURBO MAX DECAL FLAG DECAL WARNING TONGUE RISING DECAL DANGER CRUSHING HAZARD DECAL COUPLER STORAGE, RED DECAL COUPLER STORAGE, BLACK DECAL DANGER ELECTROCUTION HA DECAL CAUTION GENERAL 4X5 DECAL WARNING HYD PRESS LONG DECAL GP PLANTING COMPONENTS DECAL DEGREE LH DECAL DEGREE RH Apply 1 1/8" back from the front frame tube. Apply 1 1/8" back from the front frame tube. 06/12/ P

16 Table of Contents Transport Assembly Part Number Index P /12/17

17 Table of Contents Part Number Index Section 3: Transport Transport Assembly Ref. Part No. Part Description Comments Revision dwg C C C C C C C C D C C C C C C C C C C Image No. SPINDLE 2.75 X SEAL GREASE 2.75X4.003X0.300 BEARING CONE 387-AS BRG CUP 3.8ID 382A TIRE/WHL 11LX15 12 PLY 8BLT BKS HEAVY 8-BOLT HUB BEARING CUP #LM BEARING CONE #LM HARDENED SPINDLE WASHER NUT HEX SLOTTED 1-14 PIN COTTER 7/32 X 2 GREASE CAP X.28 HUB STUD 5/8-18X2 1/2 GR5 NUT LUG 5/8-18 X 90 DEG PLT 8-BOLT HUB SPINDLE ASM 75-8 HHCS 3/4-10 X 5 GR5 NUT HEX TOP LOCK 3/4-10 PLT WHEEL 16.5X /8OFFSET BKSN TIRE TITAN 340/60R16.5 Includes items 18 & 19 Include items 1-4 & /12/ P

18 Table of Contents Hydraulic Depth Control Part Number Index P /12/17

19 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Depth Control Ref. Part No. Part Description Comments Revision dwg C C C H C C C H D H C C C S C C H H S C C C C Image No. HYD VALVE DEPTH CONTROL CROSS HHCS 5/16-18X2 GR5 WASHER LOCK SPRING 5/16 PLT DEPTH STOP TUBE HHCS 1/2-13X3 GR5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT DEPTH STOP BRACKET DEPTH STOP ROD 1/2" THREADED DEPTH STOP END SPRING COMP.781D.125W 2.63LG WASHER FLAT 1/2 HARD ASTMF436 1/2-13 4XPROJECTION WELD NUT DEPTH STOP ASSEMBLY HHCS 1/2-13X2 1/2 GR5 NUT HEX TOP LOCK 1/2-13 PLT ANGLE GAUGE BKT ANGLE GAUGE ADJUSTABLE LINK 14.50" HHCS 3/8-16X1 1/4 GR5 NUT HEX TOP LOCK 3/8-16 PLT U-BOLT 1/2-13 X 3 1/32 X 6 DECAL TMX GAUGE Includes items /12/ P

20 Table of Contents Hydraulic Lift System Part Number Index P /12/17

21 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Lift System Ref. Part No. Part Description Comments Revision dwg C C C C D C C C C C C C C C C C S C D Image No. CYL REP 3.75X10X1.38 ROD (TIE) HYD VALVE DEPTH CONTROL CROSS PL 3/4MORB HOLLOW HEX COUNTERBALANCE VALVE MAN. T.T. DOUBLE HYD TEE BLOCK AD 3/4MORB 3/4MJIC EL 3/4MJIC 3/4MORB EL 45 3/4MORB 3/4MJIC HH1/2R /4FJIC 3/4MORB HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HH1/2R /4FJIC HG HANDLE - BLACK EXT HG HANDLE - BLACK RET AD 3/4MORB 3/4FORB (HG) HG PAIR - BLACK MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") Refer to "Hydraulic Cylinder" for breakdown Cartridge# 3C7272 Includes items /12/ P

22 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.75X10X1.38 ROD) P /12/17

23 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.75X10X1.38 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M6816 3R4840 4R4109 5R4118 6R4164-ADI 7M6318 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI MW ROD 1 3/8 DIA MW HEAD PISTON MIDWAY MIDWAY TUBE MIDWAY ADI BASE MW TIE ROD 4 X 10 CYLINDER MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.75X A4103 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 06/12/ P

24 Table of Contents Part Number Index Hydraulic Cylinder ( C 3.25X2.5X1.25 ROD) P /12/17

25 Table of Contents Part Number Index Section 4: Hydraulics Hydraulic Cylinder ( C 3.25X2.5X1.25 ROD) Ref. Part No. Part Description Comments Revision dwg M7016-ADI 2M5408NC 3R2440 4R2109 5R2108 6R2162-ADI 7M5308 2A0024 2A C C C C C Image No. MIDWAY HARDENED CLEVIS ADI ROD HEAD PISTON TUBE BASE MW TIE ROD MW WIPER SEAL U-CUP O-RING MIDWAY BACK UP MIDWAY TEFLON SEAL LOADER WEAR RING O-RING MW PISTON NUT 1-14 MW TIE ROD NUT NUT HEX 3/8-16 PLAIN HHCS 3/8-16X1 3/4 GR5 SEAL KIT MW 3.25 RPHCYL 4A2104 PIN CLEVIS 1 X 3 1/8 USABLE PIN COTTER 3/16 X 2 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 Only in item 20 06/12/ P

26 Table of Contents Turbo Gang Assembly Part Number Index P /12/17

27 Table of Contents Part Number Index Section 5: Gangs Turbo Gang Assembly Ref. Part No. Part Description Comments Revision dwg D C D C D C D D D D D C C C C H D D D D D C C C C C C C C C C C C C D C H H C Image No. GANG MOUNT BRACKET 5/8 C-FLEX BRG HANGER 1X3 GANG BRACKET MOUNT PEER MF DISK BEARING HALF SPOOL CAST TC COULTER TURBO 20X.256X1.78 FULL SPOOL 7 1/2 GANG BOLT X GANG BOLT X GANG BOLT X WASHER FLAT 3/4X6 1/2X3/4 THK WASHER DURA-TIGHT 1.81ID X 7.0 WASHER MACH 2 1/2X1 3/4X10GA NUT HEX SLOTTED 1 3/4-5 REGULR HHCS 5/16-18X3 1/4 GR5 SCRAPER BAR BRACKET SCRAPER BAR /2 SCRAPER BAR - 50 SCRAPER BAR /2 SCRAPER - 15 SCRAPER 9 1/2" TURBOTILL HHCS 3/4-10X6 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X7 1/2 GR5 HHCS 5/8-11X7 GR8 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT U-BOLT 1/2-13 X 2 X 3 GR 5 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT NUT LOCK 3/4-10 PLT WASHER FLAT 1/4 USS PLT NUT HEX NYLOCK 5/16-18 PLT DELTA SCRAPER 7.5 SPACING U-BOLT 1/2-13 X 2 X 3 1/2 GR 5 GANG STOP BRKT RH GANG STOP BRKT LH HHCS 3/4-10X6 1/2 GR5 6 Blade 7 1/2" Space 7 Blade 7 1/2" Space 8 Blade 7 1/2" Space 4 7 1/2" Space 5 7 1/2" Space 6 7 1/2" Space Requires Lock Nut item 28 Center, Front Gangs All Models Center, Front Gangs All Models Center, Front Gangs All Models 06/12/ P

28 Table of Contents Rolling Harrow Assembly Part Number Index P /12/17

29 Table of Contents Part Number Index Section 6: Attachments Rolling Harrow Assembly Ref. Part No. Part Description Comments Revision dwg H C C C H H D D D C C C C C H D D D C C C H H C C C C C C C H C C Image No. DRAG FRAME TM HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT BRACKET - ROLLING HARROW LH BALL JOINT BRACKET ROLLING SPIKE TUBE (64) ROLLING SPIKE TUBE (70) ROLLING SPIKE TUBE (76) U-BOLT 5/8-11X3 1/32X4 1/2 SPT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1-8X4 GR5 NUT HEX 1-8 NYLON INSERT PLT BEARING HANGER (LONG) ROLLING SPIKE BOLT (68 1/4) ROLLING SPIKE BOLT (74 1/4) ROLLING SPIKE BOLT (80 1/4) BEARING FLG 1 1/2ID 5 IN SQ RHSNB 1/2-13X1 1/2 GR5 NUT HEX TOP LOCK 1/2-13PLT SPIDER WHEEL MED FEATHER SPIDER WHEEL LARGE SPIDER WHEEL FRONT SPACER SPIDER WHEEL REAR SPACER WASHER.13 X 2.69X 1.53 PLT NUT HEX SLOTTED 1 1/2-6 PLT HHCS 1/4-20X2 3/4 GR8 PLT WASHER FLAT 1/4 SAE PLT NUT HEX NYLOCK 1/4-20 SPIKE WHEEL SMALL WASHER MACH 2.25 X 1.50 X 10GA DECAL AMBER REFLECTOR 2X9 Mount Tube for 10 Wheel Gang Mount Tube for 11 Wheel Gang Mount Tube for 12 Wheel Gang Shaft for 10 Wheel Gang Shaft for 11 Wheel Gang Shaft for 12 Wheel Gang One on each side 06/12/ P

30 Table of Contents Part Number Index Heavy Reel Following Rolling Harrow Assembly P /12/17

31 Table of Contents Part Number Index Section 6: Attachments Heavy Reel Following Rolling Harrow Assembly Ref. Part No. Part Description Comments Revision dwg L C C H C C C H C C C D C C C D C C C C C H H C C D D C C C H H C C C C D C C C Image No. REEL ARM ASSEMBLY SPRG COM 1.47ODX.31WX11 3/8 BL WASHER FLAT 3/4 USS PLT SPRING BOLT PIN 3/4 X 2-1/8 - SNAP RING WASHER 1 1/4 X 3/4 X 18 GA PLT SNAP RING EXT 3/4".042T ADJ SLIDE BRACKET PIN BENT 5/8 X 2 3/4 USBL BOW-TIE LOCK PIN PIN CLEVIS 5/8 X 2 - SNAP RING LINK SNAP RING EXT 5/8 WASHER MACH 1.00 X.625 X 14GA HHCS 5/8-11X2 GR5 REEL ARM LEVER NUT HEX TOP LOCK 5/8-11 PLT NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NUT LOKCK 3/4-10 PLT HHCS 3/4-10X4 1/2 GR5 REEL ARM REEL ARM MOUNTING BRACKET U-BOLT 5/8-11X3 1/32X4 1/2 SPT U-BOLT 5/8-11X2 17/32X3 1/2 PART - 10' REEL PART - 11' REEL REEL MOUNTING BRACKET HHCS 1-8X4 GR5 WASHER FLAT 1 SAE PLT 5' HD REEL 6' HD REEL NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT NUT HEX TOP LOCK 1/2-13 PLT WASHER FLAT 1/2 SAE PLT REEL BRG SPACER BEARING FLG 1 1/2ID 5 IN SQ RHSNB 1/2-13X1 1/2 GR5 HHCS 5/8-11X4 GR5 Model 850 Model 1000 Models 850 & 1000 Model /12/ P

32 Table of Contents Drag Mount Assembly Part Number Index P /12/17

33 Table of Contents Part Number Index Section 6: Attachments Drag Mount Assembly Ref. Part No. Part Description Comments Revision dwg H H C C C Image No. ATTACHMENT BAR 1000TM ATTACHMENT BAR 850TM HHCS 3/4-10X2 GR5 WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT Model 1000 (Shown) Model /12/ P

34 Table of Contents Part Number Index Hydraulic Gang Angle System, Optional P /12/17

35 Table of Contents Part Number Index Section 7: Options Hydraulic Gang Angle System, Optional Ref. Part No. Part Description Comments Revision dwg C D D C C C C C C C C C S C D C C C Image No. CYL REP 3.25X2.5X1.25 ROD(TIE) ORIFICE PLATE 1/16 3/4 DOUBLE HYD TEE BLOCK LOCK VALVE EL 3/4MJIC 3/4MORB AD 3/4MORB 3/4MJIC HH3/8R /4MORB 3/4FJIC HH3/8R /4FJIC HH3/8R /4FJIC HG HANDLE - RED RET HG HANDLE - RED EXT AD 3/4MORB 3/4FORB (HG) HG PAIR - RED MORB-FORB CP 3/4FORB MALE QD POPPET TYPE HOSE WRAP,LARGE SIZE,SHORT(8") EL 45 3/4MORB 3/4MJIC HH3/8R /4FJIC HH3/8R /4FJIC Refer to "Hydraulic Cylinder" for breakdown Rod End Port Only Includes items /12/ P

36 Table of Contents Weight Package, Optional Part Number Index P /12/17

37 Table of Contents Part Number Index Section 7: Options Weight Package, Optional Ref. Part No. Part Description Comments Revision dwg S D D C C D C C A D C C C Image No. 750 LB WEIGHT ASSEMBLY PART LB WEIGHT ASSEMBLY PART LB WEIGHT ASSEMBLY HHCS 3/4-10X12 GR5 PLT WASHER FLAT 3/4 SAE PLT PART - WEIGHT BOX WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT 1500 LB TT CENTER FRME WGT KIT WEIGHT BOX STOP U-BOLT 1/2-13 X 4 1/32 X 5 1/4 WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT Includes items 2 thru 8 1 maximum, 2 weights. 06/12/ P

38 Table of Contents Part Number Index Part Number Index The Part Number Index is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page D D M7016-ADI...23, 25 2A A A , 25 2M5408NC M R R R R D S S H H S D S H H H D D D...21, D D D D D D D D D D D D D...21, D H H D D D D D D D D S D D D D D D D D V H H H H S H...13, H S H H H H H H H D D D D D H S H H H H H H H H H H H H...13, D D D D D A H C H D D H H H H H L H H H H H H H S R R R2162-ADI R4164-ADI M M C C C C C C C...23, C C C C...11, 13, 29, C C...13, C...29, C...13, C...29, C C C C C C C C C C C C C C C C C C C C C C C C C...7, C C... 9, 13, 15, 19, 27, C...13, 27, 29, C...27, C... 11, 13, 27, 29, 33, C...7, C C C C C C C C C...9, 13, C C C...23, C C C C C...7, C C C...19, 29, C C...7, C C...7, C... 7, 9, 13, 15, 19, 27, C C C...13, 27, 29, C... 11, 13, 27, 29, 33, C C C C...7, C...7, C C C C C C C C C...7, 9, 11, C C C C C... 7, 9, 11, 13, 23, C C C C...11, C...9, 13, 23, C C C C C C C C C...9, 13, C C C C...29, C C C C C C C C C...9, C...19, C C...13, C...21, C...21, C C C C...21, C C C C...21, C C C C C C C...21, C C C C C C C C P /12/17

39 Table of Contents Part Number Index Part Number Index (continued) Part Number Page Part Number Page C C C C C C C C C C C C C...29, C C C C C C C C C C C C C C C C C...15, C C C C C C C C C...13, C C C C C C...7, 9, C C C C C C C C C C...13 dwg , 25 dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg dwg PPI-203VR...7 PPI-205H...7 PPI-302V /12/ P

40 Great Plains Mfg., Inc E. North Street Salina, Kansas USA