Trencher AP-TR48 & AP-TR PK Parts Manual. Copyright 2019 Printed 04/22/19

Transcription

1 Trencher AP-TR48 & AP-TR PK Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2019 Printed 04/22/19 Cover photo may show optional equipment not supplied with standard unit.

2 Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Hitch Assembly...6 Boom and Hitch Assembly...6 Boom Mount With Bearings...8 Depth Indicator...10 Grease Cylinder Chain Tensioner...12 Section 3: Chain Options...14 Alligator and Cup Teeth 2 Pitch 6" Wide...14 Alligator and Cup Teeth 2 Pitch 8" Wide...16 Alligator and Cup Teeth 2 Pitch 10" Wide...18 Scorpion and Cup Teeth 2 Pitch 6" Wide...20 Scorpion and Cup Teeth 2 Pitch 8" Wide...22 Scorpion and Cup Teeth 2 Pitch 10" Wide...24 Standard Cup Teeth 2 Pitch 6" Wide...26 Standard Cup Teeth 2 Pitch 8" Wide...28 Standard Cup Teeth 2 Pitch 10" Wide...30 Standard Cup Teeth 4 Pitch 6" Wide...32 Standard Cup Teeth 4 Pitch 8" Wide...34 Standard Cup Teeth 4 Pitch 10" Wide...36 The Master Link...38 Section 4: Hydraulic Options & Accessories...40 Hydraulic Cylinder C Side Shift...40 Motor High Flow GPM...42 Motor Standard Flow GPM...44 Side Shift Hydraulics...46 Side Shift Manual...48 Section 5: Decals & Paint...50 Decal Placement...50 Touch-up Paints Copyright All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 AP-TR48 & AP-TR60 Trencher PK 04/22/19

3 Alphabetized A B D G H K M S T Alligator and Cup Teeth 2 Pitch 6" Wide...14 Alligator and Cup Teeth 2 Pitch 8" Wide...16 Alligator and Cup Teeth 2 Pitch 10" Wide...18 Boom and Hitch Assembly...6 Boom Mount With Bearings...8 Decal Placement...50 Depth Indicator...10 Grease Cylinder Chain Tensioner...12 Hydraulic Cylinder C Side Shift...40 Touch-up Paints...52 Motor High Flow GPM...42 Motor Standard Flow GPM...44 Scorpion and Cup Teeth 2 Pitch 6" Wide...20 Scorpion and Cup Teeth 2 Pitch 8" Wide...22 Scorpion and Cup Teeth 2 Pitch 10" Wide...24 Side Shift Hydraulics...46 Side Shift Manual...48 Standard Cup Teeth 2 Pitch 6" Wide...26 Standard Cup Teeth 2 Pitch 8" Wide...28 Standard Cup Teeth 2 Pitch 10" Wide...30 Standard Cup Teeth 4 Pitch 6" Wide...32 Standard Cup Teeth 4 Pitch 8" Wide...34 Standard Cup Teeth 4 Pitch 10" Wide...36 The Master Link /22/19 AP-TR48 & AP-TR60 Trencher PK 3

4 4 AP-TR48 & AP-TR60 Trencher PK 04/22/19

5 04/22/19 AP-TR48 & AP-TR60 Trencher PK 5

6 Boom and Hitch Assembly Section 2: Hitch Assembly AP-TR48 & AP-TR60 Trencher PK 04/22/19

7 Boom and Hitch Assembly Section 2: Hitch Assembly Ref. Part No. Part Description Comments Revision Dwg D H H H H H H S C D H H H H S S H H D D D D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C Drawing Image Number MON FTG GREASE 1/8-27 NPT STRT MON BLEEDR FTG 5/ /4TURN SKID STEP LONG, CAST STEEL AUGER SHAFT WMT TOP/BTM RAIL 4FT EXT. TOP/BTM RAIL 5FT EXT. ARM BOOM END WLDMT. 4FT ARM BOOM END WLDMT. 5FT ROLLER SHAFT WLDMT ROLLER W/BRGS & SHIELDS BRG 1.00SQX3.15X1.44W ROLLER MACHINED MOTOR MOUNT FRAME FRONT CRUMBER ARM WLDMT OFFSET BAR WLDMT DEPTH INDICATOR BOOM MOUNT W/BRG AUGER 15 1/2" DIA., LG WMT CRUMBER FRAME WLDMNT COVER, ZERK CRUMBER SHOE 6" CRUMBER SHOE 8" CRUMBER SHOE 10" SKID STEP CASTING BLACK DEFLECTOR LINKAGE CRUMBER HHCS 3/8-16X3 GR5 HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X3 1/2 GR5 HFSS 1/2-13X1 1/4 GR8 HHCS 3/8-16X3 1/2 GR5 HHCS 5/8-11X3 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 RHSNB 5/16-18X1 GR5 RHSNB 3/8-16X1 1/2 GR5 HFS 1/2-13 X 1 GR8 PLT HHCS 1/2-13X2 GR8 NUT HEX 5/16-18 PLT NUT HEX 3/8-16 PLT NUT HEX 1/2-13 PLT NUT LOCK 5/8-11 PLT NUT MAC-LOK FLG 3/8-16 GR F NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 HARD ASTMF436 WASHER FLAT 1/2 USS HARD PLT SPKT 160A15 8 HOLES SP 12PT FLG HD 5/8-11X2.5 PLT HFS 3/8-16X1 1/4 GR8 ZNYCR CYL. GREASE 1.25X RL CAP PLUG - CCF-5/ BLACK TR48 TR60 TR48 TR60 6" Chain 8" Chain 10" Chain TR60 04/22/19 AP-TR48 & AP-TR60 Trencher PK 7

8 Boom Mount With Bearings Section 2: Hitch Assembly AP-TR48 & AP-TR60 Trencher PK 04/22/19

9 Boom Mount With Bearings Section 2: Hitch Assembly Ref. Part No. Part Description Comments Revision Dwg S H D D C C C C Drawing Image Number BOOM MOUNT W/BRG BOOM ARM WMT SHAFT DRIVE BRG SPACER SNAP RING EXT SNAP RING INT [140MM] BRG BALL 3.14IDX5.51ODX1.10 SL BRG BALL 3.14IDX5.51OD DBL ROW 04/22/19 AP-TR48 & AP-TR60 Trencher PK 9

10 Depth Indicator Section 2: Hitch Assembly AP-TR48 & AP-TR60 Trencher PK 04/22/19

11 Section 2: Hitch Assembly Depth Indicator Ref. Part No. Part Description Comments Revision Dwg S D H C C C C C C C Drawing Image Number DEPTH INDICATOR WEIGHTED INDICATOR DEPTH INDICATOR WLDMT HHCS 5/16-18X1 GR5 SHOULDER BOLT 3/8X1/2X5/16-18 NUT HEX WHIZ 5/16-18 PLT WASHER FLAT 3/8 USS PLT DECAL PATENT LEVEL INDICATOR DECAL PATENT PENDING DECAL DEPTH INDICATOR TRENCHER S/N K+ S/N K- 04/22/19 AP-TR48 & AP-TR60 Trencher PK 11

12 Grease Cylinder Chain Tensioner Section 2: Hitch Assembly AP-TR48 & AP-TR60 Trencher PK 04/22/19

13 Grease Cylinder Chain Tensioner Section 2: Hitch Assembly Ref. Part No. Part Description Comments Revision Dwg C Drawing Image Number CYLINDER 2X22X1.125 ROD MON TUBE WELDMENT MON ROD WELDMENT MON FTNG PLUG 7/16-20 ORB SCKT MON FTG GREASE 1/8-27 NPT STRT MON BLEEDR FTG 5/ /4TURN MON WIRE RING MON SEAL ZURCON U-CUP RU MON SEAL WIPER 1.25 SNAP IN DA 04/22/19 AP-TR48 & AP-TR60 Trencher PK 13

14 Alligator and Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

15 Alligator and Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A D D D C C C C C C C C C C C C C C C C C Image No. DIG CHAIN ALLIG/CP UT20006M35 DIG CHAIN ALLIG/CP UT20006M40 * SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH ALLIGATOR LH CNT-4" BIT HLDR ALLIGATOR RH CNT-4" BIT HLDR ALLIGATOR LH 5" BIT HLDR ALLIGATOR RH 5" BIT HLDR ALLIGATOR LH 6" BIT HLDR ALLIGATOR RH 6" BIT HLDR CARBIDE BIT W/FLARE & CLIP HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=12ea, TR60=12ea TR48=46ea, TR60=52ea TR48=12ea, TR60=16ea TR48=70ea, TR60=80ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=11ea, TR60=13ea TR48=11ea, TR60=13ea TR48=6ea, TR60=7ea TR48=6ea, TR60=7ea TR48=3ea, TR60=3ea TR48=3ea, TR60=3ea TR48=3ea, TR60=3ea TR48=3ea, TR60=3ea TR48=24ea, TR60=26ea TR48=24ea, TR60=28ea TR48=12ea, TR60=16ea TR48=10ea, TR60=12ea TR48=12ea, TR60=12ea TR48=12ea, TR60=12ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 15

16 Alligator and Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

17 Alligator and Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H D D D C C C C C C C C C C C C C C C C C C C Image No. DIG CHAIN ALLIG/CP UT20008M35 DIG CHAIN ALLIG/CP UT20008M40 * SPREADER WLDMT 8" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH ALLIGATOR LH CNT-4" BIT HLDR ALLIGATOR RH CNT-4" BIT HLDR ALLIGATOR LH 5" BIT HLDR ALLIGATOR RH 5" BIT HLDR ALLIGATOR LH 6" BIT HLDR ALLIGATOR RH 6" BIT HLDR CARBIDE BIT W/FLARE & CLIP HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X2 3/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=4ea, TR60=4ea TR48=10ea, TR60=12ea TR48=40ea, TR60=48ea TR48=12ea, TR60=12ea TR48=70ea, TR60=80ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=11ea, TR60=14ea TR48=11ea, TR60=14ea TR48=6ea, TR60=6ea TR48=6ea, TR60=6ea TR48=4ea, TR60=5ea TR48=4ea, TR60=5ea TR48=2ea, TR60=3ea TR48=2ea, TR60=3ea TR48=24ea, TR60=28ea TR48=8ea, TR60=8ea TR48=8ea, TR60=8ea TR48=22ea, TR60=24ea TR48=12ea, TR60=12ea TR48=8ea, TR60=12ea TR48=12ea, TR60=12ea TR48=8ea, TR60=12ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 17

18 Alligator and Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

19 Alligator and Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H H D D D C C C C C C C C C C C C C C C C C C C Image No. DIG CHAIN ALLIG/CP UT20010M35 DIG CHAIN ALLIG/CP UT20010M40 * SPREADER WLDMT 8" SPREADER WLDMT 10" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH ALLIGATOR LH CNT-4" BIT HLDR ALLIGATOR RH CNT-4" BIT HLDR ALLIGATOR LH 5" BIT HLDR ALLIGATOR RH 5" BIT HLDR ALLIGATOR LH 6" BIT HLDR ALLIGATOR RH 6" BIT HLDR CARBIDE BIT W/FLARE & CLIP HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X2 3/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=4ea, TR60=4ea TR48=4ea, TR60=4ea TR48=8ea, TR60=12ea TR48=34ea, TR60=40ea TR48=12ea, TR60=12ea TR48=86ea, TR60=96ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=13ea, TR60=14ea TR48=12ea, TR60=14ea TR48=5ea, TR60=6ea TR48=5ea, TR60=6ea TR48=6ea, TR60=6ea TR48=6ea, TR60=6ea TR48=2ea, TR60=2ea TR48=2ea, TR60=2ea TR48=26ea, TR60=28ea TR48=8ea, TR60=8ea TR48=8ea, TR60=8ea TR48=20ea, TR60=24ea TR48=18ea, TR60=20ea TR48=8ea, TR60=8ea TR48=16ea, TR60=20ea TR48=8ea, TR60=8ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 19

20 Scorpion and Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

21 Scorpion and Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A D D D C C C C C C C C C C C C C C C C Image No. DIG CHAIN SCRP/CP UT20006C35 DIG CHAIN SCRP/CP UT20006C40 * SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH SCORPION RH 6" BOLT ON SCORPION LH 6" BOLT ON SCORPION LH BOLT ON CNT-4" SCORPION RH BOLT ON CNT-4" SCORPION LH 5" BOLT ON SCORPION RH 5" BOLT ON HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=12ea, TR60=12ea TR48=46ea, TR60=52ea TR48=12ea, TR60=16ea TR48=70ea, TR60=80ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=11ea, TR60=13ea TR48=11ea, TR60=13ea TR48=3ea, TR60=3eac TR48=3ea, TR60=3ea TR48=6ea, TR60=6ea TR48=6ea, TR60=6ea TR48=3ea, TR60=3ea TR48=3ea, TR60=3ea TR48=24ea, TR60=26ea TR48=12ea, TR60=12ea TR48=10ea, TR60=12ea TR48=12ea, TR60=12ea TR48=12ea, TR60=12ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 21

22 Scorpion and Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

23 Scorpion and Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H D D D C C C C C C C C C C C C C C C C C C Image No. DIG CHAIN SCRP/CP UT20008C35 DIG CHAIN SCRP/CP UT20008C40 * SPREADER WLDMT 8" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH SCORPION RH 6" BOLT ON SCORPION LH 6" BOLT ON SCORPION LH BOLT ON CNT-4" SCORPION RH BOLT ON CNT-4" SCORPION LH 5" BOLT ON SCORPION RH 5" BOLT ON HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X2 3/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=4ea, TR60=4ea TR48=10ea, TR60=12ea TR48=40ea, TR60=48ea TR48=12ea, TR60=12ea TR48=70ea, TR60=80ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=11ea, TR60=14ea TR48=11ea, TR60=14ea TR48=2ea, TR60=3ea TR48=2ea, TR60=3ea TR48=6ea, TR60=6ea TR48=6ea, TR60=6ea TR48=4ea, TR60=5ea TR48=4ea, TR60=5ea TR48=8ea, TR60=8ea TR48=8ea, TR60=8ea TR48=22ea, TR60=24ea TR48=12ea, TR60=12ea TR48=8ea, TR60=12ea TR48=12ea, TR60=12ea TR48=8ea, TR60=12ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 23

24 Scorpion and Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

25 Scorpion and Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H H D D D C C C C C C C C C C C C C C C C C C Image No. DIG CHAIN SCRP/CP UT20010C35 DIG CHAIN SCRP/CP UT20010C40 * SPREADER WLDMT 8" SPREADER WLDMT 10" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG SPACER INSIDE 1.05"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH SCORPION RH 6" BOLT ON SCORPION LH 6" BOLT ON SCORPION LH BOLT ON CNT-4" SCORPION RH BOLT ON CNT-4" SCORPION LH 5" BOLT ON SCORPION RH 5" BOLT ON HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X2 3/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT HHCS 1/2-20X3 1/2 GR8 PLT HHCS 1/2-20X3 3/4 GR8 PLT HHCS 1/2-20X4 1/2 GR8 PLT TR48=4ea, TR60=4ea TR48=4ea, TR60=4ea TR48=8ea, TR60=12ea TR48=34ea, TR60=40ea TR48=12ea, TR60=12ea TR48=86ea, TR60=96ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=13ea, TR60=14ea TR48=12ea, TR60=14ea TR48=2ea, TR60=2ea TR48=2ea, TR60=2ea TR48=5ea, TR60=6ea TR48=5ea, TR60=6ea TR48=6ea, TR60=6ea TR48=6ea, TR60=6ea TR48=8ea, TR60=8ea TR48=8ea, TR60=8ea TR48=20ea, TR60=24ea TR48=18ea, TR60=20ea TR48=8ea, TR60=8ea TR48=16ea, TR60=20ea TR48=8ea, TR60=8ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 25

26 Standard Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

27 Standard Cup Teeth 2 Pitch 6" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A D D C C C C C C C Drawing Image Number DIG CHAIN 2P-CUP UT20006W35 DIG CHAIN 2P-CUP UT20006W40 * SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=24ea, TR60=28ea TR48=34ea, TR60=50ea TR48=70ea, TR60=80ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=17ea, TR60=20ea TR48=18ea, TR60=19ea TR48=36ea, TR60=28ea TR48=34ea, TR60=52ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 27

28 Standard Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

29 Standard Cup Teeth 2 Pitch 8" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H D D C C C C C C C C Drawing Image Number DIG CHAIN 2P-CUP UT20008W35 DIG CHAIN 2P-CUP UT20008W40 * SPREADER WLDMT 8" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=5ea, TR60=7ea TR48=20ea, TR60=24ea TR48=40ea, TR60=46ea TR48=70ea, TR60=90ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=20ea, TR60=22ea TR48=20ea, TR60=23ea TR48=20ea, TR60=20ea TR48=20ea, TR60=24ea TR48=40ea, TR60=46ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 29

30 Standard Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

31 Standard Cup Teeth 2 Pitch 10" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H H D D C C C C C C C C Image No. DIG CHAIN 2P-CUP UT20010W35 DIG CHAIN 2P-CUP UT20010W40 * SPREADER WLDMT 8" SPREADER WLDMT 10" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=4ea, TR60=5ea TR48=4ea, TR60=5ea TR48=18ea, TR60=20ea TR48=36ea, TR60=20ea TR48=86ea, TR60=100ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=21ea, TR60=25ea TR48=23ea, TR60=25ea TR48=16ea, TR60=20ea TR48=18ea, TR60=20ea TR48=52ea, TR60=60ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 31

32 Standard Cup Teeth 4 Pitch 6" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

33 Standard Cup Teeth 4 Pitch 6" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A D D C C C C C C C Image No. DIG CHAIN 4P-CUP UT200064W35 DIG CHAIN 4P-CUP UT200064W40 * SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=12ea, TR60=12ea TR48=24ea, TR60=28ea TR48=36ea, TR60=40ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=9ea, TR60=11ea TR48=9ea, TR60=11ea TR48=12ea, TR60=12ea TR48=24ea, TR60=28ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 33

34 Standard Cup Teeth 4 Pitch 8" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

35 Standard Cup Teeth 4 Pitch 8" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H D D C C C C C C C C Image No. DIG CHAIN 4P-CUP UT200084W35 DIG CHAIN 4P-CUP UT200084W40 * SPREADER WLDMT 8" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=2ea, TR60=2ea TR48=12ea, TR60=8ea TR48=20ea, TR60=24a TR48=20ea, TR60=44ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=10ea, TR60=11ea TR48=10ea, TR60=11ea TR48=8ea, TR60=8ea TR48=12ea, TR60=12ea TR48=20ea, TR60=24ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 35

36 Standard Cup Teeth 4 Pitch 10" Wide Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

37 Standard Cup Teeth 4 Pitch 10" Wide Section 3: Chain Options Ref. Part No. Part Description Comments Revision Dwg A A H H D D C C C C C C C C Image No. DIG CHAIN 4P-CUP UT200104W35 DIG CHAIN 4P-CUP UT200104W40 * SPREADER WLDMT 8" SPREADER WLDMT 10" SPACER INSIDE SHORT 1.55"LG SPACER INSIDE LONG 1.80"LG NUT HEX FLG/LK 1/2-20 PLT GR G PIN, MASTER " CHAIN MASTER KEEPER PIN CUP TOOTH LH CUP TOOTH RH HHCS 1/2-20X2 1/4 GR8 PLT HHCS 1/2-20X3 GR8 PLT HHCS 1/2-20X3 1/4 GR8 PLT TR48=2ea, TR60=2ea TR48=2ea, TR60=2ea TR48=8ea, TR60=12ea TR48=20ea, TR60=20ea TR48=44ea, TR60=48ea TR48=1ea, TR60=1ea TR48=1ea, TR60=1ea TR48=11ea, TR60=12ea TR48=11ea, TR60=12ea TR48=8ea, TR60=8ea TR48=8ea, TR60=12ea TR48=28ea, TR60=28ea 04/22/19 AP-TR48 & AP-TR60 Trencher PK 37

38 The Master Link Section 3: Chain Options AP-TR48 & AP-TR60 Trencher PK 04/22/19

39 Section 3: Chain Options The Master Link Ref. Part No. Part Description Comments Revision Dwg B C C Drawing Image Number 2"PTCH CHN,1STATION W/2PN&KPRS PIN, MASTER " CHAIN MASTER KEEPER PIN Includes Items #2 & #3. 04/22/19 AP-TR48 & AP-TR60 Trencher PK 39

40 Hydraulic Cylinder C Side Shift Section 4: Hydraulic Options & Accessories AP-TR48 & AP-TR60 Trencher PK 04/22/19

41 Hydraulic Cylinder C Side Shift Section 4: Hydraulic Options & Accessories Ref. Part No. Part Description Comments Revision Dwg C N/A N/A N/A N/A N/A N/A N/A N/A Drawing Image Number CYLILNDER 2x22x1.25 ROD * MON TUBE WELDMENT MON PISTON NUT MON PISTON TSS-ISO-WR MON CYLINDER HEAD MON ROD WELDMENT MON REPAIR KIT 20WR-112 TSS MON WEAR RING MON SEAL ZURCON WYNSEAL 2.00 MON RETAINING RING INT 2.00 MON WEAR RING MON SEAL ZURCON U-CUP RU MON SEAL WIPER 1.13 SNAP IN DA24 MON SEAL DUAL Z22 PU MON RETAINING RING EXT 2.00 Includes items #7 to #14 04/22/19 AP-TR48 & AP-TR60 Trencher PK 41

42 Motor High Flow GPM Section 4: Hydraulic Options & Accessories AP-TR48 & AP-TR60 Trencher PK 04/22/19

43 Motor High Flow GPM Section 4: Hydraulic Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A C C C C C C C C C C C C C C C C Drawing Image Number HIGH FLOW MOTOR GPM * CABLE TIE.31X21.5 6DIA 120LB HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT EL 45 9/16MJIC 9/16FJIC EL 45 9/16MJIC 9/16MORB AD 9/16MJIC BLKHD WITH LN CP 3/8 FEMALE QD 3/8FNPT CP 1 5/16FORB FEMALE QD CP 1 5/16FORB MALE QD HYD MOTOR, 57.4 CU IN HH3/8R /16FJIC EL /16MORB 1 5/16MJIC HH3/8R /16FJIC 3/8MNPT HH1R FJIC HH1R FJIC 1.31MORB DECAL GPM SEAL KIT EATON C/7C, C 04/22/19 AP-TR48 & AP-TR60 Trencher PK 43

44 Motor Standard Flow GPM Section 4: Hydraulic Options & Accessories AP-TR48 & AP-TR60 Trencher PK 04/22/19

45 Motor Standard Flow GPM Section 4: Hydraulic Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A C C C C C C C C C C C C C C C C Drawing Image Number STD FLOW MOTOR GPM * CABLE TIE.31X21.5 6DIA 120LB HHCS 1/2-13X2 1/2 GR5 WASHER LOCK SPRING 1/2 PLT HYD MOTOR, 34.9 CU IN BI-DIR EL 45 9/16MJIC 9/16FJIC EL 45 9/16MJIC 9/16MORB AD 9/16MJIC BLKHD WITH LN CP 3/8 FEMALE QD 3/8FNPT HH3/8R /16FJIC EL /16MORB 1 5/16MJIC HH3/8R /16FJIC 3/8MNPT HH3/4R FJIC 1.06MORB HH3/4R FJIC CUP 1 1/16FORB MALE QUICK CPLR CUP 1 1/16FORB FML QUICK CPLR DECAL GPM SEAL KIT EATON C/7C, C 04/22/19 AP-TR48 & AP-TR60 Trencher PK 45

46 Side Shift Hydraulics Section 4: Hydraulic Options & Accessories AP-TR48 & AP-TR60 Trencher PK 04/22/19

47 Side Shift Hydraulics Section 4: Hydraulic Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A D C C C C C C C C C C C C C C Drawing Image Number SIDE SHIFT HYD. SUPPORT BRACKET BLOCK HHCS 3/8-16X1 GR5 WASHER LOCK SPRING 3/8 PLT PIN COTTER 5/32 X 1 1/2 LONG PIN CLVS 1.0X3.38 USBL AD 9/16MJIC 3/4MORB EL 3/4MORB 9/16MJIC AD 1 5/16MORB 1 5/16MJIC EL /16MORB 1 5/16MJIC VALVE,SELECTOR 6WAY 2POS 40GPM CYL 2X22X1.125 ROD (WELDED) HH1/4R /16FJIC CORDURA DECAL SIDE SHIFT/TRENCHING HHCS 5/16-18X1 GR5 NUT LOCK 5/16-18 PLT Includes #2 to #14 04/22/19 AP-TR48 & AP-TR60 Trencher PK 47

48 Side Shift Manual Section 4: Hydraulic Options & Accessories AP-TR48 & AP-TR60 Trencher PK 04/22/19

49 Side Shift Manual Section 4: Hydraulic Options & Accessories Ref. Part No. Part Description Comments Revision Dwg A D D D C C C C C Drawing Image Number SIDE SHIFT MANUAL SUPPORT PLATE HYD. CLAMP OUTSIDE CLAMP INSIDE W/THREADS HHCS 3/8-16X2 3/4 GR5 EL 1 5/16MJIC BLKHD 45 W/LN PLUG PLASTIC (1"SCHED. 40 PIPE HHCS 5/16-18X1 GR5 NUT LOCK 5/16-18 PLT Includes Items (#2 to #7) 04/22/19 AP-TR48 & AP-TR60 Trencher PK 49

50 Decal Placement Section 5: Decals & Paint AP-TR48 & AP-TR60 Trencher PK 04/22/19

51 Decal Placement Section 5: Decals & Paint Ref. Part No. Part Description Comments Revision Dwg C C C C C C C C C C C C C C C Drawing Image Number DECAL PATENT LEVEL INDICATOR DECAL PATENT PENDING DECAL DANGER THROWN OBJECT HAZ DECAL FLAG DECAL WARNING PINCH POINT GEN DECAL WARNING HIGH PRESSURE DECAL WARNING GENERAL SAFTEY DECAL WARNING READ MANUAL DECAL, DIG SAFE DECAL KUBOTA 10" DECAL DEPTH INDICATOR TRENCHER DANGER ROTATING CHAIN & AUGER DECAL TR48 WHITE DECAL TR60 WHITE DECAL SIDE SHIFT/TRENCHING S/N K+ S/N K- TR48 TR60 04/22/19 AP-TR48 & AP-TR60 Trencher PK 51

52 Touch-up Paints Section 5: Decals & Paint No diagram associated with this Parts List 52 AP-TR48 & AP-TR60 Trencher PK 04/22/19

53 Touch-up Paints Section 5: Decals & Paint Ref. Part No. Part Description Comments Revision C CTU CQT CGL GLOSS BLACK SPRAY CAN GLOSS BLACK TOUCH-UP 5OZ GLOSS BLACK QUART GLOSS BLACK GALLON All Products 04/22/19 AP-TR48 & AP-TR60 Trencher PK 53

54 The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page , , D D A H H H H H S H H H A H H H S...7, H A A S...7, A A A A A A A A A A A A A A A A A A A A A A A B H... 17, 19, 23, 25, 29, 31, 35, H...19, 25, 31, D... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, D... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, H A H D D D D D D D D D D D... 15, 17, 19, 21, 23, D D D D C...43, C C C C C C C C...43, C C...11, 47, C C C C C C C C C C...47, C C C C C C C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, C C C C...7, C...7, 43, C C C C C C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, C C C C...43, C...43, C C...11, C C C C C C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, C...21, 23, C...21, 23, C...21, 23, C...21, 23, C...15, 17, C...15, 17, C...15, 17, C...15, 17, C...15, 17, C...15, 17, C...21, 23, C...21, 23, C...15, 17, C CGL CQT CTU C C C C C C...43, C...43, C C C C C C C... 17, 19, 23, 25, 29, 31, 35, C...17, 19, 23, C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, C... 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, C... 15, 17, 19, 21, 23, C... 15, 17, 19, 21, 23, C... 15, 17, 19, 21, 23, C...11, C C C C C...7, C...43, C...43, C C...43, C C C C C C C C C C...11, C C C C...47, C C , 45 Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg Dwg N/A AP-TR48 & AP-TR60 Trencher PK 04/22/19

55 This Page Intentionally Left Blank 04/22/19 AP-TR48 & AP-TR60 Trencher PK 55

56