EnSight 10 Basic Training Exercises
|
|
- Denis Evans
- 5 years ago
- Views:
Transcription
1 Exercise 1: Color the Comanche helicopter EnSight 10 Basic Training Exercises 1. Start EnSight 10 and press the Cancel button on the Welcome screen 2. Click on File -> Open and select the Simple Interface (see the image below on the left) 3. Set the File Type to Wavefront OBJ (at the end of the list) and go to the../ensight 10 Training/ Exercises/EnSight Basic Exercises/Exercise 1 - Comanche/Comanche.obj (see the image below on the left) Select each part or groups of parts and click the Color Wheel icon on the Quick Edit Menu to change the color, shading type and opacity if needed (see the image above on the right) 5. Click the More button under the color swatches and color the body of the Comanche with a military green color; for instance Red = 17, Green = 28 and Blue = Set the opacity of the cockpit glass to 0.65 and color it with a medium gray color 7. Color the 2 seats with a tan color; for instance Red = 140, Green = 120 and Blue = The end result should look like the Comanche pictured here 1
2 Exercise 2: Create streamlines, particle traces and a clip plane around the Chevrolet Traverse SUV 1. Click on File -> Open and click the OK button on the New Case menu and keep the default of Replace Currently Loaded Data (see the image below on the left); select the Simple Interface again Set the File Type to Case and go to the../ensight 10 Training/Exercises/EnSight Basic Exercises/Exercise 2 - GM Traverse/gmt561-psd-drag.case 3. Hide parts 1-9 and by either clicking the eye icon or by right clicking and selecting Hide (see the image above on the right) 4. Rotate the car so the Z-axis is pointing up and fit the geometry to the viewport by clicking the icon on the Quick Settings toolbar 5. Switch on the Line Tool by clicking on the Line Tool icon ; you probably won't see the Line Tool because it's hidden inside of the car Go to the Parts List and right click on any part and click Part Select -> Visible, this selects all the visible parts in the model Click on the eye icon on the Feature Toolbar and switch off the visibility for all visible parts or right click and select Hide; the Line Tool is now visible Drag the Line Tool by its center and adjust the tool by its end points so it's in front of the car; make sure the Line Tool is in the correct position by rotating the view or by using the side, front and top view of the car; we'll use the Line Tool to emit streamlines from Click the eye icon again to make the car visible again or right click and select Show Make sure the visible parts are still selected in the Parts List and color all visible parts grey, for instance by right clicking in the Parts List or on the car and selecting Grey 6. Select parts 1-9 in the Parts List 7. Click the Particle Traces icon on the Feature Toolbar and the Particle Traces menu is displayed 8. Take the default settings but under Emit From select the Line Tool and click on the Create with Selected Parts button; please note the *Working* message in the Message Area in the lower left hand corner of the EnSight window while EnSight is calculating the streamlines; after a few seconds you should see some streamlines but if you don't, make sure the Line Tool is in the fluid domain by placing it closer to the car 2
3 9. Try some of the options such as: # Points (change to 25 for instance), set the Direction to +/- 10. Color the Particle Trace Part by a variable, for instance the pressure_coefficient, by either using the Color Wheel, right clicking on the Particle Trace Part or by using drag-and-drop from the Variable Object List 11. Modify the range of the color palette by moving the cursor over the legend and dragging the min and max values - make the range from 1.0 to -1.0 (see the image on the left below); the model should look something like the picture below on the right Left click on the streamlines in the graphics window and an 8-arrow icon will appear; left click on these arrows (the cursor will change to a pointing finger) and drag the streamlines interactively (it's like having a smoke generator in a wind tunnel) Double click the Particle Trace Part in the Parts List; toggle the Animate button on the Edit Attributes menu and click the Animate Settings button; under Tracer Head Representation select Arrows; see what the effects are of changing the Scale and the Detail 14. Hide the Particle Trace Part and see only the particles fly by; what are the effects of Tracer Time and Tracer Delta changes? Toggle the Multiple Pulses on and change the Pulse Interval 3
4 15. Switch off the Particle Trace animation by double clicking the Particle Trace Part in the Parts List and switching the Animate toggle off 16. Select parts 1-9 and create a clip by clicking the Clip icon on the Feature toolbar; select the Mesh Slice to be in Y and set the Value to 0 (see the image below on the left) which is the center plane of the car; color the clip plane by the Velocity variable and set the color range to 0-40; make the clip plane transparent with an opaque value of 0.85; your model should look something like the picture below on the right Please note that you can also left click on the clip plane and move the plane interactively; however, this is a lot more taxing on the CPU and GPU so it probably won't update as fast as moving streamlines Extra Credit 18. Create Vector Arrows by clicking the icon on the Feature toolbar; select the Clip Plane Part and for the Variable select the velocity and set the Density to 0.1; color the Vector Arrow Part with the velocity variable for instance 19. Select parts 1-9 and create an Isosurface by clicking the icon; set the Variable to total_pressure and set the Value to 0; color the Isosurface Part with the turb_kinetic_energy variable and modify the range to Color the entire car by the pressure_coefficient but do not use the Color Wheel or a right click of the mouse 4
5 Exercise 3: Query and plot using the Line Tool and query a point on a clip plane of a stir tank 1. Click on File -> Open and click the OK button on the New Case menu and keep the default of Replace Currently Loaded Data; select the Simple Interface again 2. Set the File Type to Case and go to the../ensight 10 Training/Exercises/EnSight Basic Exercises/Exercise 3 & 4 Stir Tank/stir_tank.case 3. Hide parts 3, 5 and 6 4. Switch on the Line Tool by clicking on the Line Tool icon ; you probably won't see the Line Tool because it's hidden inside of the yellow part with Part Id = 4; move the Line Tool so it's inside of the Flow Field (Part Id = 1) 5. Use the Line Tool to create a query and plot of the static pressure along the Line Tool (right click on the Line Tool); see if you can make the plot look like the one below 6. Create a clip in the Flow Field with a Mesh Slice in X and query a point on the clip using the Interactive Probe Query feature by clicking the icon; select Surface Pick for the Query and select Velocity for the Variable, then click the P-key or click the mouse wheel on the clip plane 7. Set the Query back to None at the end of the exercise 5
6 Exercise 4: Stir tank with multiple viewports and dynamic labels 1. Click on File -> Open and click the OK button on the New Case menu and keep the default of Replace Currently Loaded Data; select the Simple Interface again 2. Set the File Type to Case and go to the../ensight 10 Training/Exercises/EnSight Basic Exercises/Exercise 3 & 4 Stir Tank/stir_tank.case 3. Hide parts 3, 5 and 6 4. Make a clip plane with a Mesh Slice at X = 1.0 (select the Flow Field as the parent); create vector arrows on the clip plane with a Density of 0.25, so select the Clip Plane Part that you've just created as the parent, and color the vector arrows by the velocity; hide the Clip Plane Part so only the vector arrows are visible 5. As you can see, the vector arrows are coming out of the Clip Plane Part and it would be nice to just have the tangential component in the clip plane; to do this, double click the Vector Arrows Part in the Parts List and toggle the Advanced button on the Edit Attributes for tagged Vector Arrow (see the image below on the left) Set the Projection to Tangential and set the Scale Factor to 2.5; the model should look something like the picture above on the right 7. Create a new viewport by right clicking on the background and selecting Viewports -> Create; the new viewport can be moved and resized; move it to the top left corner of the graphics window and make the size a little bigger by dragging one of the corners 8. Right click in the background of the new viewport and select Part Visibility -> Hide All; the new viewport is now not showing anything at all; in the Parts List, click on the Vector Arrow Part and drag it into the new viewport; now the new viewport only displays the Vector Arrow Part (make you are looking at the +X view; use the icon and select +X if the view is incorrect) 6
7 9. Create a new text annotation by right clicking in the background and selecting Quick Text; edit the text to 'Clip Section at X = ' then click on the Special Values tab and select Part Value and select Clip Plane ->> 0001, then click the Insert Special Item button (see the image below on the left); the Part Value takes the current value of the X-value of the section clip and pastes it into the text string so it's dynamically linked to the position of the clip plane (and the Vector Arrow Part since it's a child of the Clip Plane ->> 0001 part) 10. Your model should look something like the picture below on the right Make a clip plane with a Mesh Slice at X = 0.5 (select the Flow Field as the parent) and color the clip plane by the velocity; create another new viewport and put it below the viewport you've created in the top left corner; create another dynamic annotation just like the one for the top left viewport (see image below) 7
EnSight 10.2 Basic Training. Martin J. Faber Sr. Account Manager, North America
EnSight 10.2 Basic Training Martin J. Faber Sr. Account Manager, North America EnSight 10.2 Basic Training Overview 1 2 Training Objectives What are we trying to achieve with this training The Basics EnSight
More informationFlow Sim. Chapter 12. F1 Car. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.
Chapter 12 F1 Car Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar and
More informationRhinoCFD Tutorial. Flow Past a Sphere
RhinoCFD Tutorial Flow Past a Sphere RhinoCFD Ocial document produced by CHAM September 26, 2017 Introduction Flow Past a Sphere This tutorial will describe a simple calculation of ow around a sphere and
More informationTUTORIAL 03: RHINO DRAWING & ORGANIZATIONAL AIDS. By Jeremy L Roh, Professor of Digital Methods I UNC Charlotte s School of Architecture
TUTORIAL 03: RHINO DRAWING & ORGANIZATIONAL AIDS By Jeremy L Roh, Professor of Digital Methods I UNC Charlotte s School of Architecture Modeling in 3D requires the use of various drawing and organizational
More informationVisualization with ParaView
Visualization with Before we begin Make sure you have 3.10.1 installed so you can follow along in the lab section http://paraview.org/paraview/resources/software.html http://www.paraview.org/ Background
More informationINTViewer Tutorial Cube Tutorial
INTViewer Tutorial Cube Tutorial This tutorial shows how to use INTViewer to display a seismic cube stored in a Seismic file. Windows created will include INLINE, XLINE, Time Slice and an arbitrary traverse,
More informationAdjust model for 3D Printing. Direct modeling tools 13,0600,1489,1616(SP6)
Adjust model for 3D Printing Direct modeling tools 13,0600,1489,1616(SP6) Sometimes, the model needs to be prepared or adapted for printing. Adding material, change of a draft angles are an example. In
More informationGUIDE TO View3D. Introduction to View3D
View3D Guide Introduction to View3D... 1 Starting Hampson-Russell Software... 2 Starting View3D... 4 A Brief Summary of the View3D Process... 8 Loading the Seismic and Horizon Data... 8 Viewing the Data...
More informationClickteam Fusion 2.5 Creating a Debug System - Guide
INTRODUCTION In this guide, we will look at how to create your own 'debug' system in Fusion 2.5. Sometimes when you're developing and testing a game, you want to see some of the real-time values of certain
More informationIn this tutorial, you will create a scene with sandman dispersing in sand, as shown in in the image below.
Particle Flow In this tutorial, you will create a scene with sandman dispersing in sand, as shown in in the image below. Creating the Project Folder 1. Create a project folder with the name c17_tut1 at
More informationMicrosoft Excel 2007 Lesson 7: Charts and Comments
Microsoft Excel 2007 Lesson 7: Charts and Comments Open Example.xlsx if it is not already open. Click on the Example 3 tab to see the worksheet for this lesson. This is essentially the same worksheet that
More informationPress the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
More informationWhat s New in the GM EPC
What s New in the GM EPC The GM Next Gen EPC has numerous new features designed to make finding the right part faster and easier. For detailed instructions on using each feature, select User Guide from
More informationExercise 5 Animated Excel Charts in PowerPoint
Exercise 5 Animated Excel Charts in PowerPoint This is a fun exercise to show you how even graphs can become even more interesting if you use multimedia. You will write some slides on your own to summarize
More informationIntroduction to PowerPoint 2007
Introduction to PowerPoint 2007 PowerPoint is one of the programs included in the Microsoft Office suite. It s used to create presentations, also called slide shows, that are typically displayed via a
More informationGetting Started. What is SAS/SPECTRAVIEW Software? CHAPTER 1
3 CHAPTER 1 Getting Started What is SAS/SPECTRAVIEW Software? 3 Using SAS/SPECTRAVIEW Software 5 Data Set Requirements 5 How the Software Displays Data 6 Spatial Data 6 Non-Spatial Data 7 Summary of Software
More informationCopyright 2015 The evsm Group, All Rights Reserved. Product C. Product A. Product B. Production Activity. Cycle Time 2. Uptime Percent.
EPEI Wizard Tutorial The EPEI wizard calculates the min possible and actual EPEI (Every Part Every Interval) intervals for multiple products going through a single station with differing demands and lot
More informationHow to view details for your project and view the project map
Tutorial How to view details for your project and view the project map Objectives This tutorial shows how to access EPANET model details and visualize model results using the Map page. Prerequisites Login
More informationExercise 1a: Interacting With HyperMesh
Exercise 1a: Interacting With HyperMesh This exercise will cover many of the basic concepts that are central to many of the features in HyperMesh. By the end of this exercise you should be familiar with
More informationAdjust model for 3D Printing. Positioning - Consider Other Parts 13,0600,1489,1635(SP6)
Adjust model for 3D Printing 13,0600,1489,1635(SP6) In this exercise, we will learn about parts positioning, and in particular, about the option Consider Other Parts. As we Position and Orientate parts
More informationDEEP I R O N I C S O F T W A R E IMAGE SEARCH
I R O N I C S O F T W A R E DEEP IMAGE SEARCH, L t d email:i r o n i c s u p p o r t @ g m a i l. c o m w w w. i r o n i c s o f t w a r e. c o m INTRODUCTION Deep is an image browser and search tool.
More informationSCENE FILE MANIPULATION SCENE FILE MANIPULATION GETTING STARTED MODELING ANIMATION MATERIALS + MAPPING RENDERING. Saving Files. Save.
SCENE FILE MANIPULATION SCENE FILE MANIPULATION There are several things you can do with a scene file in 3ds Max. You can save a file, save a file temporarily and retrieve it, and combine scene files.
More informationPage 1 of 10 Creating Cigarette Smoke In this tutorial, you use a particle system to create a stream of cigarette smoke trailing from an ashtray. The animation relies on space warps to affect the movement
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationCreative Uses of PowerPoint 2003
Creative Uses of PowerPoint 2003 Creating an Audio File 1) Connect your microphone 2) Click on Insert 3) Click on Movies and Sounds 4) Click on Record Sound Play Stop Record 5) Click on the Record button
More informationAutoCAD 2009 User InterfaceChapter1:
AutoCAD 2009 User InterfaceChapter1: Chapter 1 The AutoCAD 2009 interface has been enhanced to make AutoCAD even easier to use, while making as much screen space available as possible. In this chapter,
More information2. In the Start and End Dates section, use the Calendar icon to change the Displayed Start Date to 1/1/2015 and the Displayed End Date to 5/31/2015.
Tutorials Lesson 1 - Format a Schedule In this lesson you will learn how to: Change the schedule s date range. Change the date headings. Change the schedule dimensions. Change the legend and add a new
More informationIntroduction. Table Basics. Access 2010 Working with Tables. Video: Working with Tables in Access To Open an Existing Table: Page 1
Access 2010 Working with Tables Introduction Page 1 While there are four types of database objects in Access 2010, tables are arguably the most important. Even when you're using forms, queries, and reports,
More informationThe Basics of PowerPoint
MaryBeth Rajczewski The Basics of PowerPoint Microsoft PowerPoint is the premiere presentation software. It enables you to create professional presentations in a short amount of time. Presentations using
More informationPOWERFUL APPLICATIONS USING PYTHON IN ENSIGHT. Aric Meyer CEI Japan Users Meeting
POWERFUL APPLICATIONS USING PYTHON IN ENSIGHT Aric Meyer CEI Japan Users Meeting 2012-10-26 Outline 1. Overview of Python and EnSight 2. Detailed Introduction to 2 Tools 3. Quick Introduction to 6 Tools
More informationSciGraphica. Tutorial Manual - Tutorials 1and 2 Version 0.8.0
SciGraphica Tutorial Manual - Tutorials 1and 2 Version 0.8.0 Copyright (c) 2001 the SciGraphica documentation group Permission is granted to copy, distribute and/or modify this document under the terms
More informationTangents. In this tutorial we are going to take a look at how tangents can affect an animation.
Tangents In this tutorial we are going to take a look at how tangents can affect an animation. One of the 12 Principles of Animation is called Slow In and Slow Out. This refers to the spacing of the in
More informationAutodesk Fusion 360: Render. Overview
Overview Rendering is the process of generating an image by combining geometry, camera, texture, lighting and shading (also called materials) information using a computer program. Before an image can be
More informationUnderstanding the Interface
2. Understanding the Interface Adobe Photoshop CS2 for the Web H O T 2 Understanding the Interface The Welcome Screen Interface Overview Customizing Palette Locations Saving Custom Palette Locations Customizing
More informationGetting Started with LabVIEW Virtual Instruments
Getting Started with LabVIEW Virtual Instruments Approximate Time You can complete this exercise in approximately 30 minutes. Background LabVIEW programs are called virtual instruments, or VIs, because
More informationPre-Lab Excel Problem
Pre-Lab Excel Problem Read and follow the instructions carefully! Below you are given a problem which you are to solve using Excel. If you have not used the Excel spreadsheet a limited tutorial is given
More informationCreate a unit using United Streaming and PowerPoint. Materials: Microsoft PowerPoint, Internet access, United Streaming account
Create a unit using United Streaming and PowerPoint Materials: Microsoft PowerPoint, Internet access, United Streaming account Find United Streaming Clips: 1. Decide on a topic for your unit. 2. Search
More informationFlow Sim. Chapter 14 P-51. A. Set Up. B. Create Flow Simulation Project. Step 1. Click Flow Simulation. SolidWorks 10 Flow Sim P-51 Page 14-1
Chapter 14 A. Set Up. P-51 Flow Sim Step 1. If necessary, open your ASSEMBLY file. Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in the
More informationGUIDE TO VIEW3D. Introduction to View3D
View3D Guide Introduction to View3D... 1 Starting Hampson-Russell Software... 2 Starting View3D... 4 A Brief Summary of the View3D Process... 8 Loading the Seismic and Horizon Data... 8 Selection Errors...
More informationMcIDAS-V Tutorial Displaying Level II Radar Imagery updated July 2016 (software version 1.6)
McIDAS-V Tutorial Displaying Level II Radar Imagery updated July 2016 (software version 1.6) McIDAS-V is a free, open source, visualization and data analysis software package that is the next generation
More informationQuick Guide for Photoshop CC Basics April 2016 Training:
Photoshop CC Basics Creating a New File 1. Click File > New 2. Keep Default Photoshop Size selected in the Preset drop-down list. 3. Click OK. Showing Rulers 1. On the Menu bar, click View. 2. Click Rulers.
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationFull Search Map Tab. This map is the result of selecting the Map tab within Full Search.
Full Search Map Tab This map is the result of selecting the Map tab within Full Search. This map can be used when defining your parameters starting from a Full Search. Once you have entered your desired
More informationTutorials. Lesson 1 - Format a Schedule. In this lesson you will learn how to: Change the schedule s date range. Change the date headings.
In this lesson you will learn how to: Change the schedule s date range. Change the date headings. Tutorials Change the schedule dimensions. Change the legend and add a new legend entry. Work with pages
More informationFlow Sim. Chapter 16. Airplane. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 Airplane Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar
More informationSpiky Sphere. Finding the Sphere tool. Your first sphere
Spiky Sphere Finding the Sphere tool The Sphere tool is part of ShapeWizards suite called MagicBox (the other tools in the suite are Pursuit, Shell, Spiral). You can install all these tools at once by
More informationFirst Steps - Ball Valve Design
COSMOSFloWorks 2004 Tutorial 1 First Steps - Ball Valve Design This First Steps tutorial covers the flow of water through a ball valve assembly before and after some design changes. The objective is to
More informationAir Movement. Air Movement
2018 Air Movement In this tutorial you will create an air flow using a supply vent on one side of a room and an open vent on the opposite side. This is a very simple PyroSim/FDS simulation, but illustrates
More informationModeling Level Design
Summary This tutorial has introduced you to several of the tools you can use to make a low-polygon model with editable poly functionality. These tools can be adapted to the task of modeling any low-polygon
More informationHeat Exchanger Efficiency
6 Heat Exchanger Efficiency Flow Simulation can be used to study the fluid flow and heat transfer for a wide variety of engineering equipment. In this example we use Flow Simulation to determine the efficiency
More informationSOLIDWORKS: Lesson 1 - Basics and Modeling. Introduction to Robotics
SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals Introduction to Robotics SolidWorks SolidWorks is a 3D solid modeling package which allows users to develop full solid models in a simulated environment
More informationCreate a Scrapbook Page
Create a Scrapbook Page You are now going to create a scrapbook page that will contain an arrangement of pictures and text. 1. Open Photoshop start > programs > Adobe Master Collection > Photoshop CS5
More informationuse selection tools, layers & masks in PhotoPlus X4 Faking it! Combine three source photos and add text to create a composite image or montage.
How to use selection tools, layers & masks in PhotoPlus X4 Faking it! Combine three source photos and add text to create a composite image or montage. The example montage uses photographs of a famous building
More informationGetting Started with DADiSP
Section 1: Welcome to DADiSP Getting Started with DADiSP This guide is designed to introduce you to the DADiSP environment. It gives you the opportunity to build and manipulate your own sample Worksheets
More informationLearning the Pro/ENGINEER Interface
2 Learning the Pro/ENGINEER Interface This chapter introduces the Pro/ENGINEER interface tools: the menus, the dashboards, the selection tools and the viewing controls. As you go through this chapter,
More informationVIEWZ 1.3 USER MANUAL
VIEWZ 1.3 USER MANUAL 2007-08 Zeus Numerix ViewZ 1.3.0 User Manual Revision: 200806061429 The latest copy of this PDF may be downloaded from the website. An online (HTML) version is also available. Zeus
More informationTable of Contents. iii
The Print Shop 2.0 Table of Contents How do I...... 1 Getting Started... 3 How do I...... 3 Understand Print Shop tabs... 3 Preview a page... 5 View the image tray... 5 Show/hide page preview and image
More informationTutorials. Lesson 3 Work with Text
In this lesson you will learn how to: Add a border and shadow to the title. Add a block of freeform text. Customize freeform text. Tutorials Display dates with symbols. Annotate a symbol using symbol text.
More informationSIMCENTER 12 ACOUSTICS Beta
SIMCENTER 12 ACOUSTICS Beta 1/80 Contents FEM Fluid Tutorial Compressor Sound Radiation... 4 1. Import Structural Mesh... 5 2. Create an Acoustic Mesh... 7 3. Load Recipe... 20 4. Vibro-Acoustic Response
More informationSpring 2011 Workshop ESSENTIALS OF 3D MODELING IN RHINOCEROS February 10 th 2011 S.R. Crown Hall Lower Core Computer Lab
[1] Open Rhinoceros. PART 1 INTRODUCTION [4] Click and hold on the Boundary Lines in where they form a crossing and Drag from TOP RIGHT to BOTTOM LEFT to enable only the PERSPECTIVE VIEW. [2] When the
More informationMicrosoft Office Word 2013
Microsoft Office Word 2013 Working with Graphics University Information Technology Services Training, Outreach & Learning Technologies Copyright 2014 KSU Department of University Information Technology
More informationApple Modelling Tutorial
Apple Modelling Tutorial In this tutorial you will work with: Spline, Lathe, UVtexture Difficulty: Easy. Go to the front view and select the button. Draw a spline like this. Click and drag, click and drag.
More informationWeb Viewer Guide. HiPER LOOK Version Copyright 2016 PIXIA Corp. All Rights Reserved.
Web Viewer Guide 2016 HiPER LOOK Version 1.4.16.0 Copyright 2016 PIXIA Corp. All Rights Reserved. Table of Contents 1 System Requirements... 5 1.1 Prerequisites... 5 1.2 Web Browser... 5 2 HiPER LOOK Web
More informationDissolving Models with Particle Flow and Animated Opacity Map
Dissolving Models with Particle Flow and Animated Opacity Map In this tutorial we are going to start taking a look at Particle Flow, and one of its uses in digital effects of making a model look as though
More informationCapstone Appendix. A guide to your lab computer software
Capstone Appendix A guide to your lab computer software Important Notes Many of the Images will look slightly different from what you will see in lab. This is because each lab setup is different and so
More informationFace to Face Thermal Link with the Thermal Link Wizard
SECTION 1 Face to Face Thermal Link with the 1 SECTION 1 Face to Face Thermal Link with the Thermal Link Wizard The following is a list of files that will be needed for this tutorial. They can be found
More informationINTRODUCTION TO MATLAB INTERACTIVE GRAPHICS EXERCISES
INTRODUCTION TO MATLAB INTERACTIVE GRAPHICS EXERCISES Eric Peasley, Department of Engineering Science, University of Oxford version 3.0, 2017 MATLAB Interactive Graphics Exercises In these exercises you
More informationDisplay. Introduction page 67 2D Images page 68. All Orientations page 69 Single Image page 70 3D Images page 71
Display Introduction page 67 2D Images page 68 All Orientations page 69 Single Image page 70 3D Images page 71 Intersecting Sections page 71 Cube Sections page 72 Render page 73 1. Tissue Maps page 77
More informationPlotting: Customizing the Page Display
Plotting: Customizing the Page Display Setting the Page Orientation Graphs can be viewed in landscape or portrait page orientation. To change the page orientation of the active graph window, select File:Page
More informationIntroduction to SolidWorks for Technology. No1: Childs Toy
Introduction to SolidWorks for Technology No1: Childs Toy Table of Contents Table of Contents... 1 Introduction... 2 Part Modelling: Cab... 3 Part Modelling: Base... 6 Part Modelling: Wheel... 12 Assembly:
More informationMicrosoft Office Word 2016 for Windows
Microsoft Office Word 2016 for Windows Working with Graphics University Information Technology Services Learning Technologies, Training & Audiovisual Outreach Copyright 2016 KSU Division of University
More informationNetworks Florida Social Studies WorkText K-5 Digital Training Guide
Networks Florida Social Studies WorkText K-5 Digital Training Guide Table of Contents Page Navigating Social Studies Content 2 Lesson Plans 3 My Calendar 4 Customize Lesson Plans 5 Lesson Presentations
More informationHYPERSTUDIO TOOLS. THE GRAPHIC TOOL Use this tool to select graphics to edit. SPRAY PAINT CAN Scatter lots of tiny dots with this tool.
THE BROWSE TOOL Us it to go through the stack and click on buttons THE BUTTON TOOL Use this tool to select buttons to edit.. RECTANGLE TOOL This tool lets you capture a rectangular area to copy, cut, move,
More informationPolygon Modeling Basics Chapter 1 - Vertices
Polygon Modeling Basics Chapter 1 - Vertices In this tutorial we will cover the basic tools necessary for Polygon Modeling using the Vertex sub-object selection. It is less of a how to tutorial and more
More informationPowerPoint X. 1. The Project Gallery window with the PowerPoint presentation icon already selected. 2. Click on OK.
PowerPoint X Launching PowerPointX 1. Start PowerPointX by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft PowerPoint. PowerPoint
More informationHow to Add a Text Watermark to a Digital Image
How to Add a Text Watermark to a Digital Image Placing a watermark on pictures that you plan to publish to the web will identify them as your own work and discourage people from stealing your works or
More informationFLUENT Secondary flow in a teacup Author: John M. Cimbala, Penn State University Latest revision: 26 January 2016
FLUENT Secondary flow in a teacup Author: John M. Cimbala, Penn State University Latest revision: 26 January 2016 Note: These instructions are based on an older version of FLUENT, and some of the instructions
More information전산응용설계 (Computer Aided Design)
전산응용설계 (Computer Aided Design) CATIA (Computer Aided Three dimensional Interactive Application) 기계자동차공학부자동차공학전공 Chapter 3. CATIA 기초 학습내용 : 객체선택 (Selecting Objects) 객체감추기와보이기 (Hiding and Showing objects)
More informationEdupen Pro User Manual
Edupen Pro User Manual (software for interactive LCD/LED displays and monitors) Ver. 3 www.ahatouch.com Some services in Edupen Pro require dual touch capability. In order to use dual touch, your computer
More informationRenderize Live Overview
Renderize Live Overview The Renderize Live interface is designed to offer a comfortable, intuitive environment in which an operator can create projects. A project is a savable work session that contains
More informationTo show toolbars, double-click in the banner at the top or click the tools icon
8/15/2013 Welcome to Culver City s GIS Property Information Search 2.0. This instructional document provides an overview of most commonly used functionality in this streamlined, enhanced web map application.
More informationF1 in Schools Car Design Simulation Tutorial
F1 in Schools Car Design Simulation Tutorial Abstract: Gain basic understanding of simulation to quickly gain insight on the performance for drag on an F1 car. 1 P a g e Table of Contents Getting Started
More informationFlow Sim. Chapter 16. Airplane. A. Add-In. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 A. Add-In. Step 1. If necessary, open your ASSEMBLY file. Airplane Flow Sim Step 2. Click Tools Menu > Add-Ins. Step 3. In the dialog box, scroll down to Flow Simulation and place a check in
More informationImport a CAD Model 2018
Import a CAD Model 2018 Import CAD Model In this tutorial you will import a CAD file, then add a 500 kw burner fire. Figure 1. Burner fire in this example This tutorial demonstrates how to: Import a CAD
More informationAn Animated Scene. Pick a color for the street. Then use the Paint can to fill the lower part of the page with grass.
An Animated Scene In this project, you create a simple animated scene with graphics, a bit of text, a simple animation and some music. Click on the Steps below and be creative! Remember: if you must leave
More informationCS Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1
CS 1033 Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1 Upon completion of this lab, you should be able to: Open, create new, save
More informationEnterprise Timetabler Beginners Training Worksheet 1
Enterprise Timetabler Beginners Training Worksheet 1 1. Basic Customisation of the Enterprise Interface It is possible to change the default layouts of the Activity and View panes to show extra information
More information2 Solutions Chapter 3. Chapter 3: Practice Example 1
1 Solutions This section includes the step by step solutions for the practice exercise for the following chapters and sections: Chapter 3 Chapter 4 Chapter 5 Chapter 11: Rainbow Springs sample test Final
More informationsolidthinking Environment...1 Modeling Views...5 Console...13 Selecting Objects...15 Working Modes...19 World Browser...25 Construction Tree...
Copyright 1993-2009 solidthinking, Inc. All rights reserved. solidthinking and renderthinking are trademarks of solidthinking, Inc. All other trademarks or service marks are the property of their respective
More informationcreating files and saving for web
creating files and saving for web the template files assume a default image size of 300 x 300 pixels images intended for the web should be produced in rgb mode name your images in a logical format, so
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationViews of a 3-D Clevis
LESSON 5 Views of a 3-D Clevis Objectives: To become familiar with different view options. To create and modify z-axis and arbitrary clipping planes. PATRAN301ExerciseWorkbook-Release7.5 5-1 5-2 PATRAN
More informationActualtests.9A QA
Actualtests.9A0-351.51.QA Number: 9A0-351 Passing Score: 800 Time Limit: 120 min File Version: 5.6 http://www.gratisexam.com/ 9A0-351 Adobe Illustrator CC Recertification Exam Marvelous planning guide
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationINTRODUCTION TO THE MATLAB APPLICATION DESIGNER EXERCISES
INTRODUCTION TO THE MATLAB APPLICATION DESIGNER EXERCISES Eric Peasley, Department of Engineering Science, University of Oxford version 4.6, 2018 MATLAB Application Exercises In these exercises you will
More informationFlames in Particle Flow
Flames in Particle Flow In this tutorial we are going to take a look at creating some licking flames in Particle Flow. I warn you however, is that this method of fire creation is very processor intensive.
More informationLab 1: Microstrip Line
Lab 1: Microstrip Line In this lab, you will build a simple microstrip line to quickly familiarize yourself with the EMPro User Interface and how to setup FEM and FDTD simulations. If you are doing only
More informationCreating a Story in Expert Mode
Pictello (ipad, iphone and ipod touch). In this tutorial you will create a story using Expert mode. Create a New Story Tap Done With Story. Launch Pictello, and tap the plus sign in the toolbar. In the
More informationPen Tool, Fill Layers, Color Range, Levels Adjustments, Magic Wand tool, and shadowing techniques
Creating a superhero using the pen tool Topics covered: Pen Tool, Fill Layers, Color Range, Levels Adjustments, Magic Wand tool, and shadowing techniques Getting Started 1. Reset your work environment
More information