RS232 Protocol Function List

Transcription

1 RS3 Protocol Function List

2 Baud Rate : 900 Data Bits: 8 Parity: None Stop Bits: Flow Control : None UART6550 FIFO: Disable Note: It supports data rates from 9600 to 500 bps. The default is 900 bps. Depending on the equipment, a lower baud rate may be recommended for long cable runs. Write Command ~ X X X X X n CR Lead Code Projector ID Command space variable carriage return Prefix Response Format 00~99 (00: All projectors) Pass: P Fail: F 000~999 0~9999 suffix Read Command ~ X X X X X n CR Lead Code Projector ID Command space variable carriage return Prefix Response Format 00~99 (00: All projectors) Pass: O k n Fail: F Variable 000~999 0~9999 suffix System Automatically Send I N F O n variable Note: There is a <CR> after all ASCII commands. 0D is the HEX code for <CR> in ASCII code. English

3 Character to HEX table Character HEX ~ 7E Space 0 CR (Enter) 0D e.g. ASCII to HEX RS3 Command ~ CR HEX 7E D English 3

4 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter PICTURE Presentation Video 3 3 Bright ~ X X 0 ~ X X 3 O k Display Mode DICOM SIM 3 3 Blending 4 4 User 5 5 Save to User Brightness 0 ~ 00 ~ X X 0 ~ 00 ~ X X 5 O k % Contrast 0 ~ 00 ~ X X 0 ~ 00 ~ X X 6 O k % Sharpness 0 ~ 4 ~ X X 3 0 ~ 4 Color 0 ~ 00 ~ X X ~ 00 Tint 0 ~ 00 ~ X X ~ 00 Phase 0 ~ 00 ~ X X ~ 00 Frequency 0 ~ 00 ~ X X ~ 00 Horz Position 0 ~ 00 ~ X X ~ 00 Vert Position 0 ~ 00 ~ X X ~ 00 Auto Image ~ X X 0 Enable 0 & ~ X X 4 0 On Auto Test Pattern 0 & ~ X X 4 On Red Part of Red ~ X X 4 (0 ~ 000) Green Part of Red ~ X X 4 3 (0 ~ 000) Blue Part of Red ~ X X 4 4 (0 ~ 000) Color Matching Green Part of Green ~ X X 4 5 (0 ~ 000) Red Part of Green ~ X X 4 6 (0 ~ 000) Blue Part of Green ~ X X 4 7 (0 ~ 000) Blue Part of Blue ~ X X 4 8 (0 ~ 000) Red Part of Blue ~ X X 4 9 (0 ~ 000) Green Part of Blue ~ X X 4 0 (0 ~ 000) Red Part of White ~ X X 4 (0 ~ 000) Green Part of White ~ X X 4 (0 ~ 000) 4 English

5 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter PICTURE Color Matching Advanced Blue Part of White ~ X X 4 3 (0 ~ 000) Reset to Default White Peaking 0-00 Gamma Color Temperature Color Space Color Settings No 0 & ~ X X 5 Yes VIdeo Film Bright ~ X X 3 5 CRT 3 DICOM Gamma. 7 Warmest Warm ~ X X 3 6 ~ X X 8 O k Cool 3 3 Bright 5 7 RGB Color Enhancement 0 ~ Film Mode Extreme Black REC709 5 REC60 ~ X X RGB Video 4 Auto Red Gain ~ X X 4 0 ~ 00 Green Gain ~ X X 5 0 ~ 00 Blue Gain ~ X X 6 0 ~ 00 Red set ~ X X 7 0 ~ 00 Green set ~ X X 8 0 ~ 00 Blue set ~ X X 9 0 ~ 00 Reset RGB Gain/ set On On ~ X X 5 7 English 5

6 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter OUTPUT Auto 7 7 Aspect Ratio 4:3 ~ X X 6 0 ~ X X 7 O k 6:0 3 3 Native 6 6 Overscan On H Digital Zoom 50% ~ 400% ~ X X ~ 400 V Digital Zoom 50% ~ 400% ~ X X ~ 400 H Digital Shift 0 ~ 00 ~ X X 6 3 0~00 V Digital Shift 0 ~ 00 ~ X X 6 4 0~00 H Keystone 0 ~ 40 ~ X X ~ 40 Image Warping V Keystone 0 ~ 40 ~ X X ~ 40 H Pincushion 0 ~ 00 ~ X X ~ 00 V Pincushion 0 ~ 00 ~ X X ~ 00 PIP/PBP Enable 0 ~ X X 3 0 On VGA 5 HDMI 7 Main Source Component ~ X X 4 ~ X X O k HDBaseT 6 DVI-D PIP/PBP VGA HDMI 7 Sub Source Component ~ X X ~ X X 3 O k HDBaseT 9 6 DVI-D 0 Swap ~ X X Small 3 Size Medium ~ X X Large 6 English

7 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter PBP, Main Left 5 PBP, Main Top 6 PBP, Main Right 7 OUTPUT PIP/PBP Layout PBP, Main Bottom 8 ~ X X PIP-Bottom Right 4 PIP-Bottom Left 3 PIP-Top Left PIP-Top Right English French 3 Spanish 5 German Language Italian ~ X X Russian 7 Chinese Simplified 4 Japanese 5 Korean 6 0 & Ceiling Mount On ~ X X 5 3 SETUP Auto 3 Rear Projection 0 & ~ X X 5 4 On Focus ~ X X Zoom ~ X X Lens Function Lens Shift ~ X X 8 4 Lens Calibration Yes/No (Dialog box) ~ X X 5 5 Lens Lock No ~ X X Yes Menu Transparency 0 ~ 9 ~ X X ~ 9 Menu Preferences 0 & Show Messages ~ X X 0 On English 7

8 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter Keypad LED Settings On Pin Pin Protect On ~ X X Change PIN DHCP IP Address LAN Subnet Mask Default Gateway MAC Address Apply Enable SETUP WLAN Start IP End IP Subnet Mask Communications Default Gateway MAC Address SSID Projector Name Network Restart Network Network Factory Reset Serial Port Baud Rate English

9 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter SETUP OPTION Communications Auto Source High Altitude Test Pattern Background Color Hot-Key settings Power Settings RS3 Serial Port Path HDBaseT Projector Address 0-99 ~ X X 7 9 (00 ~ 99) ~ X X 0 0 On 0 & 0 & ~ X X 0 On 0 Grid Red 5 Green 6 Blue 7 ~ X X 9 5 Yellow 8 Magenta 9 Cyan 0 White Black Logo 7 Blue ~ X X 0 4 Black White 5 Blank Screen Aspect Ratio Freeze Screen Overscan Standby Power Mode 0.5W mode ~ X X 4 Communication mode 0 & 0 & Direct Power On ~ X X 0 5 On English 9

10 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter OPTION Power Settings Light Source Settings Auto Power Sleep Timer Light Source Mode Constant Power Settings Constant Luminance Settings Total Projector Hours No 0 5 Mins 5 0 Mins 0 5 Mins ~ X X Mins 0 5 Mins 5 30 Mins 30 No 0 Hours 0 ~ X X Hours 40 6 Hours 360 Constant Power Constant Luminance Eco Mode 0-0 ~ X X 3 6 (0~0) 0-0 ~ X X 5 (0~0) Light Sensor Information Light Sensor Calibration Calibrated? (Display Yes/No) Model Name ~ X X 5 O k # Serial Number ~ X X O k # Native Resolution ~ X X 5 0 O k # Firmware ~ X X O k # 0 English

11 Level Level Level 3 Level 4 Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter OPTION Main Source 3 O k # - Resolution 4 O k # - Signal Format 5 O k # - Pixel Clock 6 O k # - Horz Refresh 7 O k # - Vert Refresh 8 O k # Sub Source ~ X X O k # - Resolution 0 O k # Information - Signal Format O k # - Pixel Clock O k # - Horz Refresh 3 O k # - Vert Refresh 4 O k # Light Source Mode 5 O k # Total Projector Hours ~ X X 0 8 O k # Standby Power Mode ~ X X O k # IP Address ~ X X O k ***_***_***_*** DHCP ~ X X O k # System Temperature ~ X X O k # Factory Reset Yes/No (Dialog box) ~ X X Service English

12 Other Uart Command Item Command Range or Explanation Description Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter Filter Wheel Index [FIDX***] 0 ~ 79 ~ X X 5 8 0~79 ~ X X O k % Phosphor Wheel Index [PIDX***] 0 ~ 79 ~ X X ~ 79 ~ X X 5 3 O k % Power POWR 0& 0 0 ~ ~ X X 0 0 ~ X X 4 O k POWR0 On AV Mute AV Mute Disable 0& 0 0 ~ ~ X X 3 5 ~ X X O k AV Mute Enable Freeze Screen Unfreeze Screen 0& 0 ~ ~ X X 0 4 Freeze Screen Power On Power simulate Key input, 57 8 the value is Key Code 58 9 For example : 59 Key input ~ X X 4 0 Info [KEYG] is input 40 Power Key 0 [KEYG7] is input 60 Mode Menu key 36 Auto 4 Input 46 Up 0 Left Enter Right 3 Down 4 Menu 0 English

13 Item Command Range or Explanation Description Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter Key input Focus in Focus out Zoom in Zoom out Exit Gamma 6 Bright 9 Cont. 6 PIP 63 Lens H(Left) 64 Lens H(Right) 65 Focus(Up) Lens V(Up) simulate Key input, the value is Key Code Lens V(Down) For example : 67 ~ X X 4 0 Focus(Down) [KEYG] is input 35 Power Key Keystone H(Left) Keystone H(Right) [KEYG7] is input Menu key Zoom(Up) 3 Keystone V(Up) 5 Keystone V(Down) 6 Zoom(Down) 33 Shutter(AV Mute) 4 Hot Key 70 Pattern 7 Focus in - motor stop Focus in - motor go step 0 ~ Focus in - motor run Focus out - motor stop ~ X X Focus out - motor go step 0 ~ Focus out - motor run Zoom in - motor stop Zoom in - motor go step 0 ~ Zoom in - motor run Zoom out - motor stop ~ X X Zoom out - motor go step 0 ~ Zoom out - motor run 7 English 3

14 Item Command Range or Explanation Description Write CMD Set Parameter Optoma Read CMD Read Parameter Reply Parameter Left shift up - motor stop Lens Shift Up Left shift up - motor go step 0 ~ 3 Left shift up - motor run Left shift down - motor stop Lens Shift Down Left shift down - motor go step 0 ~ 4 Left shift down - motor run Left shift right - motor stop ~ X X 8 4 Lens Shift Right Left shift right - motor go step 0 ~ 6 Left shift right - motor run Left shift left - motor stop Lens Shift Left Left shift left - motor go step 0 ~ 5 Left shift left - motor run PIN Protect [PINP 345 ] ***** "345" is current PIN code. When PIN protect is off, input this command will turn PIN protect on, and vice versa. ~ X X ~9999 Change PIN [PINC"345,67890"] *****,***** The former 5 digits "345" is old PIN code, and the later 5 digits "67890" is new PIN code you want to set. IP Address [LIPA" "] ***.***.***.*** All network address string is need to input 5 digits ~ X X O k ***_***_***_*** 4 English

15 Error Message Item Command Range or Explanation Description Note Write CMD Error Message Standby mode Projector goto standby mode Warming up Projector warming up Cooling Down Projector cooling down Out of range Signal out of range 3 Lamp hours running out Lamp hours running out 8 Lamp Ignite Fail Laser fail to ignite R 0 Format board fail to power on and e Format Board Power On Fail p projector auto shutdown Color wheel unexpected stop and l Color Wheel Unexpected Stop y projector auto shutdown System over temperature and projector Over Temperature A 3 auto shutdown u FAN Lock Fan failure and projector auto shutdown t 4 Query command will reply all Error o I N F O FAN Lock Fan failure and projector auto shutdown messages in system 5 m FAN 3 Lock Fan 3 failure and projector auto shutdown a 6 t FAN 4 Lock Fan 4 failure and projector auto shutdown 7 i FAN 5 Lock Fan 5 failure and projector auto shutdown c 8 a Network communication failure and LAN fail then restart l 9 projector auto restart network l LD lower than 60% Available laser diodes is less than 60% y 0 Laser bank over temperature and LD NTC () Over Temperature projector auto shut down Laser bank over temperature and LD NTC () Over Temperature projector auto shut down High ambient temperature and projector High Ambient Temperature 3 auto dim to protect laser System Ready System ready 4 0 English 5

16