COMMERCIAL R-410A Refrigerant Single Speed: Tons Dual Capacity: 2-6 Tons. Submittal Data English Language/IP Units SD1020AN 01/13

Transcription

1 OMMEIAL -0A efrigerant Single Speed: 0.7- Tons Dual apacity: - Tons Submittal Data English Language/IP Units SD00AN 0/

2 Model Nomenclature - NS V T L N B N N 7-9 SS 0 A Model Type NS = Single Speed ND = Dual apacity Vintage = Painted abinet D = Unpainted abinet abinet onfiguration H = Horizontal V = Vertical Unit apacity Single Speed: 009, 0, 0, 0, 0, 00 0, 0, 0, 00, 070 Dual apacity: 0, 0, 09, 0, 07 abinet onfiguration T = Vertical Top Discharge E = Horizontal End Discharge S = Horizontal Side Discharge B = Vertical Bottom Discharge (0-07) = Vertical ear Discharge (0-07) eturn Air onfiguration L = Left = ight Voltage 0 = 0-0/0/ = -77/0/ (009-0) = 0-0/0/ (0, 0-07) = 0/0/ (0, 0-07) = 7/0/ (0, 0, 00, 070, PS only) Hot Options 0 = No Hot Generator, No IntelliStart TM = Hot Generator, without pump, No IntelliStart, (0-07) = No Hot Generator, IntelliStart (0-07) = Hot Generator, without pump, IntelliStart,, (0-07) Blower Options 0 = PS Blower = Variable Speed EM Blower (0-07) = High Static Variable Speed EM Blower Option (0, 0, 0, 0, 09) = High Static PS Blower Option (0, 00, 0, 0, 0) Non-Standard Option Details SS = Standard Option QP = in. MEV Filter SF = Stainless Steel Drain Pan SG = in. MEV Filter with Stainless Steel Drain Pan Air oil/insulation Options = FormiShield/Extended ange = FormiShield/Standard ange = No oating/extended ange = No oating/standard ange ontrol Options = Premier Microprocessor = FX0 std. no communication = FX0 w/open N om ard = FX0 w/lonworks om ard 7 = FX0 w/bacnet om ard ontrol N = None = Flow egulator ( gpm/ton) V = -Way Valve P = Internal Pump (Secondary pumping) B = -Way Valve w/ Flow egulator Hot Gas Bypass/eheat N = None G = Hot Gas Bypass (0-07) = Hot Gas eheat (0-07) B = Hot Gas Bypass w/hot Gas eheat (0-07) Sound Kit A = None B = Sound Kit oax Options = opper N = upronickel ev.: 09 January 0D NOTES: Not available with Hot Gas eheat Only on 0-0/0/ Field installed external pump kit (DPK or DPK) required for hot water generation Not available on dual capacity models Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

3 AHI/ISO - Performance atings PS Motor Model apacity Modulation Flow ate gpm cfm apacity Btu/h Loop Heat Pump Ground Heat Pump Ground Loop Heat Pump ooling EWT F EE Btu/h/W Heating EWT F apacity Btu/h OP ooling EWT 9 F apacity Btu/h EE Btu/h/W Heating EWT 0 F apacity Btu/h OP ooling Brine Full Load 77 F Part Load F apacity Btu/h EE Btu/h/W Heating Brine Full Load F Part Load F apacity Btu/h OP Energy Star ated 009 Single.0 0 9,00.,00. 0,00. 0,00. 9,00.7 7,00. yes 0 Single. 00,00.7,00.,00.,00., ,00.7 yes 0 Single.0 00,00.9,00.,700.0,00.,000.0,000. yes 0 Single.0 00,000.,000.,000. 9,000.,00.0,700. yes 0 Single.0 0 0,00 7.,000.0, ,00.0,00 0.,000. yes 00 Single.0 900,00.,700. 0,900 7.,00. 9,00. 9,00. yes 0 Single , ,900.,00.7 0,00.7,00 9.,00.0 yes 0 Single ,00.,00.,00.,900.,00. 7,00.7 yes 0 Single.0 00,00.,00.0,00.,00.,900 7.,00. yes 00 Single.0 00, ,00. 7,700.,00.,00.,00.7 yes 070 Single ,00., ,00.,00.0 7,00 7.,000. yes ooling capacities based upon 0. F DB,. F WB entering air temperature. 0//0 Heating capacities based upon F DB, 9 F WB entering air temperature. All ratings based upon 0V operation. Variable Speed EM Motor Model apacity Modulation Flow ate gpm cfm apacity Btu/h Loop Heat Pump Ground Heat Pump Ground Loop Heat Pump ooling EWT F EE Btu/h/W Heating EWT F apacity Btu/h OP ooling EWT 9 F apacity Btu/h EE Btu/h/W Heating EWT 0 F apacity Btu/h OP ooling Brine Full Load 77 F Part Load F apacity Btu/h EE Btu/h/W Heating Brine Full Load F Part Load F apacity Btu/h 0 Single.0 00,00.,00., ,00.7,000.,000.0 yes 0 Single.0 00,000.,000.,000. 9,000.7,00 9.0,700. yes 0 Single.0 0 0,700 7.,00., ,00.,700.0,000.0 yes 00 Single.0 900,00 9.,700.,00.,00.0 9,00.9 0,000.0 yes 0 Single ,00 9.,000. 7, ,00.,000.0,00. yes 0 Single ,00 9.,00.9,00 9.,900.,000. 7,00. yes 0 Single ,000 7.,00.,000.,00. 9,00 9.7,00.0 yes 00 Single.0 00, ,00. 7,000.,00.7,00 9.,00.9 yes 070 Single ,00.0,00. 79,00.,00. 7,00.,000.7 yes Full.0 90,000.0,000. 9,000.0,00.0 7,00. 9,00. Part ,00.,00.,000.,00.,00.,00.7 Full ,000 7.,00. 9,00.,00.0 0, ,000. Part.0 000, ,00. 0,00.,00. 0,00 0.0,00. Full.0 00,00. 7,00.,00.7 7,00.7 0, ,00. Part.0 00,900.,900. 7,00.,000.,700.,000.7 Full.0 00,00. 7,00. 70,700.7,00. 7,00.0,00.9 Part ,000.,00., ,00.,00.,000. Full ,000.0, , ,900. 7,00., Part.0 00,000.,00.,00.0,000.,00.,000. ooling capacities based upon 0. F DB,. F WB entering air temperature. Heating capacities based upon F DB, 9 F WB entering air temperature. All ratings based upon 0V operation. OP Energy Star ated yes yes yes yes yes 0//0 All Envision Series product is Safety listed under UL99 thru ETL and performance listed with AHI in accordance with standard -. The Envision Series is also Energy Star rated. Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

4 Vertical Dimensional Data Top Air Discharge LEFT ETUN Field Installed Duct Flange Legend AP = Alternate Service Panel BP = Blower Service Panel P = ontrol Access Panel MP = ompressor Service Panel AI OIL L Filter ack Width Access Panels B B N O O N [cm] Alternate Service Access Left eturn (ight eturn opposite side) BP AP A M Q FONT AI OIL SIDE AI OIL SIDE FONT M A P MP P AP [cm] Service Access Left eturn (ight eturn opposite side) TOP VIEW - IGHT ETUN TOP VIEW - LEFT ETUN [cm] Service Access S S.00 (. mm) U U FILTE AK ONNETION AI OIL FILTE AK ONNETION BP T T FONT. (. cm) AP BAK BAK MP IGHT VIEW - IGHT ETUN LEFT VIEW - LEFT ETUN FONT VIEW FONT POWE SUPPLY / (9. mm) KNOKOUT LOW VOLTAGE / (.7 mm) KNOKOUT MP I J K P. (. cm) ONDENSATE /" PV GLUE SOKET F G H E D Vertical Models A Width Overall abinet B Depth Height* onnections I F G H / cond D E Loop HWG HWG HWG ond- Low In Out FPT FPT In Out ensate Voltage Electrical Knockouts 0//0 ondensate is / in. PV female glue socket and is switchable from front to side. Vertical unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit. in. and is suitable for duct connection. Discharge flange is field installed and extends in. [. mm] from cabinet. J / cond Ext Pump K / cond Power Supply L Filter ack Width Discharge onnection duct flange installed (±0.0 in) M Supply Width N Supply Depth O P Q eturn onnection using std deluxe filter rack (±0.0 in) in /" /" cm mm.7 mm in /" /" cm mm.7 mm in /" /" cm mm.7 mm in " /" cm mm.7 mm S eturn Depth T eturn Height U Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

5 Vertical Dimensional Data cont. Bottomflow LEFT ETUN IGHT ETUN MP AP.70 (. cm) P MP P FILTE AK ONNETION S S FILTE AK ONNETION T T K J I BP D E F G AP BP B LEFT SIDE Q B IGHT SIDE Q.90 (.7 cm) Optional [cm] Service Access ight eturn (Opposite Side for Left eturn) [cm] Service Access L O N L A FONT H M N LEFT BOTTOM DISHAGE FLOO FOOT PINT O IGHT BOTTOM DISHAGE FLOO FOOT PINT P Legend AP =Alternate Service Panel BP =Blower Service Panel P =ontrol Access Panel MP=ompressor Service Panel Bottomflow Models Overall abinet onnections Electrical Knockouts Discharge onnection I K duct flange installed (±0.0 in) J F G H Loop / cond / cond / cond N O B D E HWG HWG HWG ondensate FPT Voltage Supply Width Low Power Depth Height In Out Ext Pump L M Supply Supply FPT In Out Depth A Width eturn onnection using std deluxe filter rack (±0.0 in) 0- in /" /" cm mm.7 mm in " /" cm mm.7 mm ondensate is / in. PV female glue socket and is switchable from side to front. 0//0 Vertical bottomflow unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit. in. and is suitable for duct connection bottomflow units use 0 in. x in. air filter. P Q eturn Depth S eturn Height T Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

6 Vertical Dimensional Data cont. ear Air Discharge BP AI OIL Legend AP = Alternate Service Panel BP = Blower Service Panel P = ontrol Access Panel MP = ompressor Service Panel BP AP. Power Supply /" (9. mm) HV Knockout K J I /" (.7 mm) LV Knockout P FONT VIEW ight eturn D E H F G ft [cm] Service Access Points Primary P AP Secondary B.00 S L Q A A P.00 L B S U U N N T FILTE AK ONNETION M M FILTE AK ONNETION T FONT H. AP AI OIL O O AI OIL Power Supply /" (9. mm) HV Knockout /" (.7 mm) LV Knockout FONT J K MP I SIDE VIEW ight eturn EA VIEW ight eturn EA VIEW Left eturn SIDE VIEW Left eturn Vertical Models Overall abinet onnections Electrical Knockouts I J K Loop / / / F G H HWG B D E cond cond cond HWG HWG ond- FPT Depth Height* In Out FPT Low Ext Power In Out ensate Voltage Pump Supply A Width 0- in /" /". 0.. N/A cm mm.7 mm N/A in " /" cm mm.7 mm ondensate is / in. PV female glue socket and is switchable from side to front. 0//0 Vertical unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit. in. and is suitable for duct connection. Discharge flange is field installed and extends in. [. mm] from cabinet. KK / cond Power Supply L Filter ack Width Discharge onnection duct flange installed (±0.0 in) M Supply Width N Supply Depth O P Q eturn onnection using std deluxe filter rack (±0.0 in) S eturn Depth T eturn Height U Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

7 Horizontal Dimensional Data IGHT ETUN Optional [cm] Service Access AP FONT Legend AP = Alternate Service Panel BP = Blower Service Panel P = ontrol Access Panel MP = ompressor Service Panel FONT MP Optional [cm] Service Access LEFT ETUN [. cm] MP ft [cm] Service Access AP [. cm] Optional [cm] Service Access H POWE SUPPLY /" KNOKOUT.9(. cm).9(. cm) H ONDENSATE LOW VOLTAGE /" KNOKOUT ONDENSATE END DISHAGE SIDE DISHAGE P SIDE DISHAGE END DISHAGE K F G J I E D.9 (7. cm) N O BP LOW VOLTAGE /" KNOKOUT A FONT VIEW O N.9(7. cm) L H Filter ack Air oil Side Blower Outlet M L M Blower Outlet Air oil Side Filter ack H. (. cm) A BP A. (. cm) IGHT ETUN END DISHAGE LEFT ETUN END DISHAGE L BP M Blower Outlet MP FONT FONT AP Blower Outlet M BP L P N IGHT ETUN SIDE DISHAGE LEFT ETUN SIDE DISHAGE N P Q S S Q.(. cm) T T FONT AP FILTE AK ONNETION FILTE AK ONNETION MP FONT IGHT ETUN IGHT VIEW B AI OIL AI OIL B LEFT ETUN LEFT VIEW NOTE: *Only models require four () hangers. Horizontal Models A Width Overall abinet B Depth Height* onnections Electrical Knockouts Discharge onnection I K duct flange installed (±0.0 in) J F G H Loop / cond / cond / cond M N D E HWG HWG HWG ond- Low Power In Out Ext Pump L Supply Supply O P FPT In Out ensate FPT Voltage Supply Height Depth Horizontal unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit. in. and is suitable for duct connection. eturn onnection ondensate using std deluxe filter rack (±0.0 in) Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and Q eturn Depth eturn Height S T PV Size in /" /" /" cm mm.7 mm mm in /" /" /" cm mm.7 mm mm in /" /" /" cm mm.7 mm mm in " /" /" cm mm.7 mm mm in " /" /" cm mm.7 mm mm in " /" /" cm mm.7 mm mm 0//0 SD00AN 0/ 7 Page of

8 Hanger Bracket Locations Hanger Dimensions Single Speed Dual apacity Model Hanger Kit Part Number Unit Hanger Dimensions A B D in..7.. n/a 99S00A0 cm.... n/a in..7.. n/a 99S00A0 cm.... n/a in.... n/a 99S00A0 cm n/a in S00A0 cm in S00A0 cm in S00A0 cm in.... n/a 99S00A0 cm n/a in S00A0 cm in S00A0 cm in S00A0 cm in S00A0 cm //0 Weight Distribution Table Single Speed Model Vertical Shipping Weight Horizontal Shipping Weight Horizontal Weight Distribution Front Back [9] [] [] [0] [0] [] 0 70 [] [] [] [0] [0] [] [9] [9] [] [9] [] [] [00] [00] [] [0] [7] [] 0 0 [] [] [] [9] [9] [] [9] [] [9] [9] [7] [7] [9] [] [70] [] [7] [] [7] [0] [70] [] [] [] 0 [9] [99] [] [] [] [0] [0] [] [7] [] [0] [] [] [] [70] [9] [] [] [] [] [] [] [] [0] [7] [7] [7] [] [] [] 09 [9] [99] [] [] [] [0] [] [9] [] [7] [] [] [] [] [70] [9] [] [] Weights are listed in lbs. [kg] // Dual apacity Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

9 Physical Data - Single Speed SINGLE SPEED Model ompressor ( each) otary Scroll Factory harge 0A, oz [kg] Vertical 9 [0.] [.9] [.0] 0 [.] [.] 0 [.7] [.] [.] 9 [.7] 0 [.] [.] Factory harge 0A, oz [kg] Horizontal 9 [0.] [.9] [.0] 0 [.] 0 [.70] 0 [.7] [.] [.] 9 [.7] 9 [.7] [.] Blower Motor & Blower Blower Motor Type/Speeds Blower Motor- hp [W] Oversized PS Blower Motor - hp [W] Blower Wheel Size (Dia x W), in. [mm] Oversized Blower Wheel Size (Dia x W), in. [mm] EM Not Available EM Variable Speed PS PS Speeds PS Speeds EM Not Available / [7] / [7] / [7] / [7] / [7] / [7] / [7] [7] [7] PS /0 [7] /0 [7] / [] / [] / [9] / [9] / [7] / [7] / [7] [7] [7] EM Not Available [7] [7] [7] Not Available PS Not Available / [9] / [7] / [7] / [0] / [0] Not Available EM PS EM PS Not Available x [ x 0] x [ x 0] 9 x 7 [9 x 7] 9 x 7 [9 x 7] Not Available 9 x 7 [9 x 7] 9 x 7 [9 x 7] Not Available 9 x 7 [9 x 7] 9 x 7 [9 x 7] 9 x 7 [9 x 7] 9 x 7 [9 x 7] 9 x 7 [9 x 7] 9 x 7 [9 x 7] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] 0 x 0 [ x ] x 0 [79 x ] x 0 [79 x ] x 0 [79 x ] x 0 [79 x ] Not Available Not Available oax and Piping onnections Size - FPT - in [mm] / [.7] / [.7] / [9.0] / [9.0] / [9.0] / [9.0] [.] [.] [.] [.] [.] HWG onnection Size - FPT - in [mm] Not Available / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] oax & Piping Volume - gal [l] 0. [0.7] 0. [.] 0.0 [.] 0.0 [.] 0.7 [.].0 [.]. [.9]. [.9]. [.]. [.]. [.7] Vertical Air oil Dimensions (H x W), in. [mm] x x 9 x 0 9 x 0 x 0 x 0 x x x x x [0 x 0] [0 x 0] [ x 0] [ x 0] [7 x ] [7 x ] [7 x ] [ x ] [ x ] [9 x ] [9 x ] Air oil Total Face Area, ft [m]. [0.]. [0.7]. [0.]. [0.].9 [0.].9 [0.].9 [0.]. [0.70]. [0.70]. [0.]. [0.] Air oil Tube Size, in [mm] / [7.9] / [9.] / [7.9] / [7.9] / [9.] / [9.] / [9.] / [9.] / [9.] / [9.] / [9.] Air oil Number of rows Filter Standard - [mm] Pleated MEV Throwaway, in [mm] Filter Standard - [mm] Pleated MEV Throwaway, in [mm] Horizontal x 0 x 0 0 x [0 x 0] [0 x 0] [0 x 0] x 0 x 0 0 x [0 x 0] [0 x 0] [0 x 0] 0 x [0 x 0] 0 x [0 x 0] x [7 x 0] x [7 x 0] x [7 x 0] x [7 x 0] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x [7 x 9] Air oil Dimensions (H x W), in. [mm] x x x x x 0 x 0 0 x 0 x 0 0 x 0 0 x 0 x [0 x 0] [0 x 0] [7 x ] [7 x ] [7 x 7] [7 x 7] [0 x 9] [0 x 0] [0 x 0] [0 x ] [0 x ] Air oil Total Face Area, ft [m]. [0.]. [0.7]. [0.]. [0.].9 [0.].9 [0.].9 [0.]. [0.70]. [0.70]. [0.]. [0.] Air oil Tube Size, in [mm] / [7.9] / [9.] / [7.9] / [7.9] / [9.] / [9.] / [9.] / [9.] / [9.] / [9.] / [9.] Air oil Number of rows Filter Standard - [mm] Pleated MEV Throwaway, in [mm] Filter Standard - [mm] Pleated MEV Throwaway, in [mm] x 0 x 0 [0 x 0] [0 x 0] x 0 x 0 [0 x 0] [0 x 0] x [7 x 0] x [7 x 0] x [7 x 0] x [7 x 0] x [7 x ] x [7 x ] x [7 x ] x [7 x ] - 0 x 0 0 x 7 [0 x 0] [ x 90] - 0 x [0 x 9] 0 x 7 [ x 90] - 0 x 0 [0 x 0] - 0 x [0 x 9] - 0 x 0 [0 x 0] - 0 x [0 x 9] - 0 x 0 [0 x 0] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] // Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 9 Page of

10 Physical Data - Dual apacity DUAL APAITY Model ompressor ( each) opeland -speed Scroll, UltraTech Factory harge -0A, oz. [kg] Vertical [.7] 7 [.] 9 [.] [.] 0 [.97] Factory harge -0A, oz. [kg] Horizontal 0 [.70] 7 [.] 9 [.] [.] 0 [.] EM Blower Motor and Blower Blower Motor Type/Speeds EM Variable Speed Blower Motor- hp [W] / [7] / [7] / [7] [7] [7] Oversized Blower Motor- hp [W] Not Available [7] [7] Not Available Blower Wheel Size (Dia x W), in. [mm] Oversized Blower Wheel Size (Dia x W), in. [mm] 9 x 7 [9 x 7] Not Available x 0 [79 x ] x 0 [79 x ] x 0 [79 x ] x 0 [79 x ] x 0 [79 x ] Not Available x 0 [79 x ] oax and Piping onnections Size - FPT - in. [mm] / [9.0] [.] [.] [.] [.] HWG onnection Size - FPT - in. [mm] / [.7] / [.7] / [.7] / [.7] / [.7] oax and Piping Volume - gal. [l] 0.7 [.]. [.9]. [.]. [.]. [.7] Vertical Air oil Dimensions (H x W), in. [mm] x 0 [7 x ] x [7 x ] x [ x ] x [9 x ] x [9 x ] Air oil Total Face Area, ft [m ].9 [0.].9 [0.]. [0.70]. [0.]. [0.] Air oil Tube Size, in. [mm] / [9.] / [9.] / [9.] / [9.] / [9.] Air oil Number of rows Filter Standard - in. [mm] Pleated MEV Throwaway, in [mm] Filter Standard - in. [mm] Pleated MEV Throwaway, in [mm] Horizontal Air oil Dimensions (H x W), in. [mm] x [7 x 0] x [7 x 0] x 0 [7 x 7] 0 x [7 x 9] 0 x [7 x 9] 0 x [0 x 9] 0 x [7 x 9] 0 x [7 x 9] 0 x 0 [0 x 0] 0 x [7 x 9] 0 x [7 x 9] 0 x [0 x ] 0 x [7 x 9] 0 x [7 x 9] 0 x [0 x ] Air oil Total Face Area, ft [m ].9 [0.].9 [0.]. [0.70]. [0.]. [0.] Air oil Tube Size, in [mm] / [9.] / [9.] / [9.] / [9.] / [9.] Air oil Number of rows Filter Standard - in. [mm] Pleated MEV Throwaway, in. [mm] Filter Standard - in. [mm] Pleated MEV Throwaway, in. [mm] - x [7 x ] - x [7 x ] - 0 x 7 [ x 90] - 0 x 7 [ x 90] - 0 x 0 [0 x 0] - 0 x [0 x 9] - 0 x 0 [0 x 0] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] - 0 x [0 x ] - 0 x [0 x 9] 0//0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 0 Page of

11 Electrical Availability PS Static Single Speed Models Dual apacity Models Voltage Option /0/ 0-0/0/ w/intellistart /0/ Standard 0-0/0/ 0/0/ 7/0/ 0-0/0/ 0-0/0/ w/intellistart /0/ High 0-0/0/ 0/0/ 7/0/ 0//0 Variable Speed EM Static Single Speed Models Dual apacity Models Voltage Option /0/ 0-0/0/ w/intellistart /0/ Standard 0-0/0/ 0/0/ 7/0/ 0-0/0/ 0-0/0/ w/intellistart /0/ High 0-0/0/ 0/0/ 7/0/ 0//0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

12 Electrical Data PS Motor Model ated Voltage Voltage Min/Max All Models Standard Models Internal Pump Models ompressor Blower Motor Total Unit Min irc Max Fuse/ Pump Total Unit Min irc Max Fuse/ M LA LA LA** FLA FLA Amp HA FLA FLA Amp HA /0/ 97/...0 n/a /0/ / n/a /0/ 97/ n/a /0/ / n/a /0/ 97/ n/a /0/ / n/a /0/ 97/ n/a /0/ / n/a /0/ 97/ /0/ / n/a * 0-0/0/ 97/ /0/ / n/a /0/ 97/ /0/ / n/a * 0-0/0/ 97/ /0/ / n/a /0/ 97/ /0/ / n/a /0/ 7/ n/a /0/ /0...0 n/a /0/ 97/ * 0-0/0/ 7/ n/a /0/ /0...0 n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 7/.9.. n/a... 0 n/a /0/ 97/ * 0-0/0/ 7/ n/a /0/ / n/a /0/ 7/.9.. n/a n/a /0/ 97/ /0/ 7/... n/a /0/ / n/a /0/ 7/ n/a n/a /0/ 97/ * 0-0/0/ 7/... n/a /0/ / n/a /0/ 7/ n/a n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 7/ n/a n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 7/ n/a n/a 9.. HA circuit breaker in USA only 0//0 * With optional high-static PS motor ** With optional IntelliStart TM, only available on 0-0/0/ Single Speed Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

13 Electrical Data cont. Variable EM Motor Model ated Voltage Voltage Min/Max All Models Standard Models Internal Pump Models ompressor Blower Motor Total Unit Min irc Max Fuse/ Pump Total Unit Min irc Max Fuse/ M LA LA LA** FLA FLA Amp HA FLA FLA Amp HA 0 0-0/0/ 97/ n/a /0/ / n/a /0/ 97/ n/a /0/ / n/a /0/ 97/ /0/ / n/a /0/ 97/ /0/ / n/a /0/ 97/ /0/ / n/a /0/ 7/ n/a /0/ /0...0 n/a /0/ 97/ * /0/ / n/a /0/ 7/ n/a /0/ /0...0 n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 97/ * 0-0/0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ 7/... n/a /0/ / n/a /0/ 97/ * 0-0/0/ 7/... n/a /0/ / n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ / n/a /0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 97/ * 0-0/0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ 7/.0..0 n/a /0/ / n/a /0/ 97/ * 0-0/0/ 7/.0..0 n/a /0/ / n/a /0/ 97/ /0/ 7/ n/a /0/ / n/a /0/ 97/ /0/ 7/ n/a /0/ /0...0 n/a HA circuit breaker in USA only 0//0 * With optional HP EM motor ** With optional IntelliStart TM, only available on 0-0/0/ Single Speed Dual apacity AUTION: When installing a unit with an variable speed EM blower motor in 0/0/ voltage, a neutral wire is required to allow proper unit operation. Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

14 Blower Performance Data Standard PS Motor Model Blwr Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Spd Size HP H MH x / ML* L H MH* x / ML L H M 9 x 7 / L H M 9 x 7 / L H M 9 x 7 / L H M 9 x 7 / L H M 0 x 0 / L H M 0 x 0 / L H M 0 x 0 / L H M x L H M x L //0 Optional High Static PS Motor Model Blwr Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Spd Size HP H M 9 x 7 / L H M 9 x 7 / L H M 0 x 0 / L H M 0 x 0 / L H M 0 x 0 / L //0 Factory settings are in Bold. Air flow values are with dry coil and standard in. MEV filter. For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]). Then for velocities of 00 fpm reduce the static capability by 0.0 in. wg, 00 fpm by 0.0 in. wg, 00 fpm by 0.in. wg. and 00 fpm by 0. in. wg. * Setting for V operation. Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

15 Blower Performance Data cont. Variable Speed EM Motor MODEL MAX AI FLOW DIP SWITH SETTINGS ESP L L L L M M L H M M H H M H H w/hp* L M H L M H w/hp* L M H L M H w/hp* L M H L L M M H H MODEL MAX AI FLOW DIP SWITH SETTINGS ESP L M H L M H w/hp* L M H L M H w/hp* L M H L M H L M H /0/0 Factory settings are at recommended L-M-H DIP switch locations FM is controlled within ±% up to the maximum ESP M-H settings MUST be located within boldface FM range Max ESP includes allowance for wet coil and standard in. MEV filter Lowest and Highest DIP switch settings are assumed to be L and H respectively //07 A -position DIP switch package on the control allows the airflow levels to be set for low, medium, and high speed when using the variable speed EM blower motor. Only three of the DIP switches can be in the on position. The first on switch (the lowest position number) determines the low speed blower setting. The second on switch determines the medium speed blower setting. The third on switch determines the high speed blower setting. The example to the right shows SW on the control board configured for the following NS*0 airflow settings. Low Speed Blower: 900 cfm Medium Speed Blower: 0 cfm High Speed Blower: 0 cfm Off SW On Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

16 Operating Limits Operating Limits ooling Heating ( F) ( ) ( F) ( ) Air Limits Min. Ambient Air ated Ambient Air Max. Ambient Air Min. Entering Air ated Entering Air db/wb 0./. 7/9 0.0 Max. Entering Air db/wb 0/ /. 0.7 Limits Min. Entering Normal Entering Max. Entering NOTE: Minimum/maximum limits are only for start-up conditions, and are meant for bringing the space up to occupancy temperature. Units are not designed to operate at the minimum/maximum conditions on a regular basis. The operating limits are dependant upon three primary factors: ) water temperature, ) return air temperature, and ) ambient temperature. When any of the factors are at the minimum or maximum levels, the other two factors must be at the normal level for proper and reliable unit operation. Definitions ABBEVIATIONS AND DEFINITIONS: cfm = airflow, cubic feet/minute EWT = entering water temperature, Fahrenheit gpm = water flow in gallons/minute WPD = water pressure drop, psi and feet of water EAT = entering air temperature, Fahrenheit (dry bulb/wet bulb) H = air heating capacity, T = total cooling capacity, S = sensible cooling capacity, kw = total power unit input, kilowatts H = total heat of rejection, HE = total heat of extraction, HW = hot water generator capacity, EE = Energy Efficient atio = BTU output/watt input OP = oefficient of Performance = Btu output/btu input LWT = leaving water temperature, F LAT = leaving air temperature, F TH = total heating capacity, L = latent cooling capacity, S/T = sensible to total cooling ratio Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

17 orrection Factor Tables Air Flow orrections (Dual apacity Part Load) Airflow ooling Heating cfm Per Ton of lg % of Nominal Total ap Sens ap Power Heat of ej Htg ap Power Heat of Ext /0/0 Air Flow orrections (Dual apacity Full Load and Single Speed) Airflow ooling Heating cfm Per Ton of lg % of Nominal Total ap Sens ap Power Heat of ej Htg ap Power Heat of Ext /0/0 ooling apacity orrections Entering Total Sensible ooling apacity Multipliers - Entering DB ºF Power Heat of Air WB ºF lg ap Input ejection * * * * * * * * * * * * * * * * * * * NOTE: * Sensible capacity equals total capacity at conditions shown. /0/09 Heating orrections Ent Air DB F Htg ap Power Heat of Ext /0/09 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 7 Page of

18 Antifreeze orrections atalog performance can be corrected for antifreeze use. Please use the following table and note the example given. Antifreeze Type Antifreeze % by wt ooling apacity Heating apacity Pressure Drop EWT - degf [Deg] 90 [.] 0 [-.] 0 [-.] Ethylene Glycol Propylene Glycol Ethanol Methanol Warning: Gray area represents antifreeze concentrations greater than % by weight and should be avoided due to the extreme performance penalty they represent. Antifreeze orrection Example Antifreeze solution is Propylene Glycol 0% by weight. Determine the corrected heating and cooling performance at 0 F and 90 F respectively as well as pressure drop at 0 F for an Envision Series NS*0-PS. The corrected cooling capacity at 90 F would be:,00 Btu/h x 0.99 =,09 Btu/h The corrected heating capacity at 0 F would be:,000 Btu/h x 0.9 =,9 Btu/h The corrected pressure drop at 0 F and gpm would be: 9.0 ft hd x.70 =. ft hd Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

19 Pressure Drop Single Speed Model Dual apacity Model GPM Pressure Drop (psi) Pressure Valve GPM v 0 F 0 F 70 F 90 F 0 F Drop (psi) / in / in / in / in / in / in in in in in in //0 0//0 GPM Pressure Drop (psi) Pressure Valve GPM v 0 F 0 F 70 F 90 F 0 F Drop (psi) / in / in in in in //0 0//0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 9 Page of

20 NS009 - Performance Data Single Speed PS (0 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H HEATING - EAT 70 F OOLING - EAT 0/7 F Power kw HE LAT ºF OP T S S/T atio Power kw H //0 EE Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 0 Page of

21 NS0 - Performance Data Single Speed PS (00 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H HEATING - EAT 70 F OOLING - EAT 0/7 F Power kw HE LAT ºF OP T S S/T atio Power kw H //0 EE Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

22 NS0 - Performance Data Single Speed PS (00 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H HEATING - EAT 70 F OOLING - EAT 0/7 F Power kw HE LAT ºF OP T S S/T atio Power kw H //0 EE Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

23 NS0 - Performance Data Single Speed PS (00 cfm) EWT F Flow ate GPM Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

24 NS0 - Performance Data Single Speed PS (700 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

25 NS00 - Performance Data Single Speed PS (900 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

26 NS0 - Performance Data Single Speed PS (0 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

27 NS0 - Performance Data Single Speed PS (0 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 7 Page of

28 NS0 - Performance Data Single Speed PS (00 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ Page of

29 NS00 - Performance Data Single Speed PS (000 cfm) EWT F Flow ate gpm Pressure Drop psi ft/hd H Power kw HEATING - EAT 70 F OOLING - EAT 0/7 F HE LAT ºF OP HW T S S/T atio Power kw H EE HW //0 Furnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact Furnace at for latest design and SD00AN 0/ 9 Page of