Slim Ducted type. Contents MMD-AP 4SPH2UL MMD-AP0094SPH2UL MMD-AP0124SPH2UL MMD-AP0154SPH2UL MMD-AP0184SPH2UL

Transcription

1 E5-3I D-AP 4SP2U Slim Ducted type D-AP0074SP2U D-AP0094SP2U D-AP024SP2U D-AP054SP2U D-AP084SP2U Contents. Specifications 2. Dimensions 3. Center of gravity 4. Piping diagram 5. Wiring diagram 6. Electrical current characteristics 7. Sensible capacity table 8. Fan characteristics (No filter) 9. Sound data. Accessories. Reference

2 D-AP 4SP2U E5-3I. Specifications Slim Ducted type odel name D- AP0074SP2U AP0094SP2U AP024SP2U AP054SP2U AP084SP2U Cooling Capacity kbtu/h eating Capacity kbtu/h Electrical characteristics Appearance Power supply 2 V (8/2 V) phase z Power consumption kw Zinc hot dipping steel plate eight In 8.3 Unit Width In 33.3 Dimension Depth In 25.4 eight In.5 Packing Width In 4 Depth In.3 Total weight eat exchanger Unit lbs 49 5 Packed unit lbs 57 Finned tube Fan unit Air filter Fan Centrifugal fan Standard air flow (igh/id/ow) cfm 38/276/ /6/265 6/353/6 459/0/34 otor W External static pressure (*) In WG 0.08 (Factory default) (Factory default) (Factory default) Field supply 0.08 (Factory default) (Factory default) Gas side In 3/8" 3/8" 3/8" /2" /2" Connecting pipe iquid side In /4" /4" /4" /4" /4" Drain port (Nominal dia.) In VP25(Polyvinyl chloride tube: External Dia.-/4 Internal Dia.) level (*2) (igh/id/ow) Under air intake db(a) 39/36/33 4/38/35 4/38.5/ /4/37.5 Back air intake db(a) 3// /3.5/ /33.5/ 37/34/32 Option parts Auxiliary fresh air flange TCB-FFURU Note (*) Non attached filter (*2) The actual values in an external operating environment are generally higher than the indicated values due to the contribution from ambient noise. 2

3 E5-3I D-AP 4SP2U 2. Dimensions D-AP0074SP2U, AP0094SP2U, AP024SP2U, AP054SP2U, AP084SP2U 0.8" (9.3) Unit external dimension 33.3"(845) 2.2"(57) 3." (80) 5.7" (45) 6.8"(7.4) (outside) 0.8" (9.3) 8.3"(2) 4-0.2"(4) 3.6"(92) 0.8" () 0.8"() 0.8"() Air discharge flange outside 3.7"(805) 0.8"() 2.6" (67) anging bolt pitch."(5) Unit external dimension 25.4"(645) 4."(359) 4."(3).2"(3).6"(4) 9.2"(234).6"() Refrigerant pipe connecting port B (iquid side) Refrigerant pipe connecting port A (Gas side) 4.6"(372) 6.6"(422) 9.8"(2) 3." (80) 2.3" (59) For Fresh Air Intake (knock-out hole) 0.8"(9.3) anging bolt pitch 35.8"(9) 2.6" (67).3"(33) 6.4"(63) Drain-up port conduit hole for power supply cable 6.8" (7.4) Electrical control box ole for control wire and remote control wiring 0.8"(9.3) 0.8" () Air intake flange outside 3.7"(805) 0.8"() Installation space Note). Indoor unit does not have air filter its inside. So be sure to set an air filter(local arrangements) in the position maintained easily such as a air intake grille (If there is no air filter, dusts are blocked in the air heat exchanger and it may cause failure or water leak inair-conditioner.) 2. eave sufficient space to remove the air filter when you attach it. Air discharge 3.9"(0) or more 5.8"(0) or more <Under air intake> 0.2"(5) or more 0.2" (5) or more 8.3"(2) Unit: in (mm) odel D- A B AP0074SP2U AP0094SP2U AP024SP2U AP054SP2U AP084SP2U Service space Ø3/8" (9.5) Ø/2" (2.7) Ø/4" (6.4) Ø/4" (6.4) Indoorunit 5.8"(0) or less 23." (587) or less Ceiling bottom surface Drain-up standing-up size Stand-up 33.5"(8) or less Note) AsABSis used for the drain discharge port ofthe main unit, the vinyl chlor paste cannot be used. Use the flexible hose (Band fix) includedinthe package. Ceiling Air intake 8.3" (2) 3.9"(0) or more.2"(285) or more Ceiling Air discharge 2.0"() 3.9"(0) 39.2"(995) 29.3"(745) <Back air intake> 0.2"(5) or more Ceiling Air intake.8"(0) or more 8.3" (2) 9.3"(235) or more 39.2"(995) 29.3"(745) Ceiling opening size 3

4 D-AP 4SP2U E5-3I 3. Center of gravity odel name X (In) Y (In) Z (In) D-AP0074SP2U D-AP0094SP2U D-AP024SP2U D-AP054SP2U D-AP084SP2U Total weight (lbs) Air intake Air discharge 4. Piping diagram iquid side Gas side Strainer Capillary Tube Air heat exchanger at indoor side Pulse otor Valve Sensor (TC2) Sensor (TCJ) Sensor (TA) Fan Fan otor Sensor (TC) 4

5 E5-3I D-AP 4SP2U 5. Wiring diagram D-AP0074SP2U, AP0094SP2U, AP024SP2U, AP054SP2U, AP084SP2U PV pressure set up) (External static F S 3 FS 6 3 CN34 (RED) CN33(WI) (WI) CN333 CN334 (WI) (WI) CN CN (WI) (WI) CN CN82 (BU) (BU) D CN68 3 RY2 TA t 2 CN4 (YE) (CK) CN7 TCJ t 2 CN2 (RED) (DISP) CN72 F T6.3 A 2 V Flow Selector unit Ground screw F2 TC2 RED t 2 CN (BK) T3.5 A 2 V 3 + WI + TC Power supply circuit (BK) CN67 t 2 CN0 (BRW) DCV DC5V DC2V DC 7V P BK TB0 2 - PN 2 3 CN80 (GRN) CN66 (WI) igh voltage Control P.C. Board for Indoor Unit 2 EXCT 2 CN73 (RED) Field Power supply 8/2-- CN (BU) CC CN (WI) Indoor unit Ground screw CN4 (BU) CN8 (BK) (WI) 4 5 (YE) CN32 (WI) CN6 2 3 CN (BU) BK BU BU BK 3 CN (WI) CN CN9 3 (YE) TB02 UU2 A B ow voltage 3WAY OPTION FAN DRIVE COOR.Broken line indicate the wiring at site. ong dashed short dashed line indicate the accessories. 2. indicates the terminal block. indicates the connection terminal. indicates the connector on the control P.C. board. IDENTIFICATION RED : RED WI : WITE Parts Name Connector A B UU2 YE : YEOW BU : BUE BK :BACK Drain Pump otor Fuse Fan otor GRY : GRAY PNK : PINK Float Switch Drain Control Relay Symbol CN** D F,2 F FS indicates the protection ground. indicates the control P.C. board ORN : ORANGE Indoor temp sensor RY2 TA BRW : BROWN GRN : GREEN Terminal Block Temp sensor TB0,02 TC,TC2,TCJ Wired Remote Control (Sold separately) aybe Outdoor unit or Indoor unit 5

6 D-AP 4SP2U E5-3I 6. Electrical current characteristics Type Slim Ducted type odel Nominal Voltage (V-Ph-z) Voltage Range (V) Power consumption FA CA OCP in ax kw A A A D-AP0074SP2U 8/ D-AP0094SP2U 8/ D-AP024SP2U 8/ D-AP054SP2U 8/ D-AP084SP2U 8/ CA: inimum Circuit Amps OCP: aximum Overcurrent Protection (Amps) FA: Full oad Amps 6

7 E5-3I D-AP 4SP2U 7. Sensible capacity table Slim Ducted type (D-AP 4SP2U) TC: Total capacity [Btu/h] SC: Sensible capacity [Btu/h] unit size outdoor air temp. FDB indoor air temp. 59 FWB 6 FWB 64 FWB 67 FWB 68 FWB 72 FWB 75 FWB 7 FDB 73 FDB 77 FDB 80 FDB 82 FDB 86 FDB 90 FDB TC SC TC SC TC SC TC SC TC SC TC SC TC SC

8 D-AP 4SP2U E5-3I Slim Ducted type (D-AP 4SP2U) TC: Total capacity [Btu/h] SC: Sensible capacity [Btu/h] unit size outdoor air temp. FDB indoor air temp. 59 FWB 6 FWB 64 FWB 67 FWB 68 FWB 72 FWB 75 FWB 7 FDB 73 FDB 77 FDB 80 FDB 82 FDB 86 FDB 90 FDB TC SC TC SC TC SC TC SC TC SC TC SC TC SC

9 E5-3I D-AP 4SP2U 8. Fan characteristics (No filter) D-AP0074SP2U, AP0094SP2U 0.2 Standard Air flow : 38 cfm D-AP024SP2U 0.2 Standard Air flow : 353 cfm 0.0 igh(0. in.wg) 0.0 igh(0. in.wg) External static pressure (in.wg) Air flow rate lower limit ow(0. in.wg) ow(0.4 in.wg) igh(0.4 in.wg) igh(0.08 in.wg) Air flow rate upper limit External static pressure (in.wg) Air flow rate lower limit ow(0. in.wg) ow(0.4 in.wg) igh(0.4 in.wg) igh(0.08 in.wg) Air flow rate upper limit ow(0.80 in.wg) 0.0 ow(0.80 in.wg) Air flow rate (cfm) Air flow rate (cfm) D-AP054SP2U D-AP084SP2U 0.2 Standard Air flow : 6 cfm 0.2 Standard Air flow : 459 cfm igh(0. in.wg) igh(0. in.wg) External static pressure (in.wg) Air flow rate lower limit ow(0. in.wg) ow(0.4 in.wg) igh(0.4 in.wg) igh(0.08 in.wg) Air flow rate upper limit External static pressure (in.wg) Air flow rate lower limit ow(0. in.wg) ow(0.4 in.wg) igh(0.4 in.wg) igh(0.08 in.wg) Air flow rate upper limit 0.0 ow(0.80 in.wg) 0.0 ow(0.80 in.wg) Air flow rate (cfm) Air flow rate (cfm) 9

10 D-AP 4SP2U E5-3I 9. Sound data D-AP0074SP2U, D-AP0094SP2U [easuring location] Back air intake [External static pressure Pa] Fan tap 3 28 Air discharge 6.56 ft (2 m) Duct Center 4.92 ft (.5 m) icrophone 3.28 ft ( m) Duct Air intake NC- NC Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC- NC Octave band center frequency (z) Octave band center frequency (z) NC- NC-

11 E5-3I D-AP 4SP2U D-AP024SP2U [easuring location] Back air intake [External static pressure Pa] Fan tap ft (2 m) 3.28 ft ( m) Duct Air discharge Center 4.92 ft (.5 m) icrophone Duct Air intake NC NC- Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC- NC Octave band center frequency (z) NC- NC Octave band center frequency (z)

12 D-AP 4SP2U E5-3I D-AP054SP2U [easuring location] Back air intake [External static pressure Pa] Fan tap Air discharge 6.56 ft (2 m) Duct Center 4.92 ft (.5 m) icrophone 3.28 ft ( m) Duct Air intake NC NC- Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC- NC NC- NC Octave band center frequency (z) Octave band center frequency (z) 2

13 E5-3I D-AP 4SP2U D-AP084SP2U [easuring location] Back air intake [External static pressure Pa] Fan tap ft (2 m) 3.28 ft ( m) Air discharge Duct Center 4.92 ft (.5 m) icrophone Duct Air intake NC- NC- Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC- NC Octave band center frequency (z) NC Octave band center frequency (z) NC- 3

14 D-AP 4SP2U E5-3I D-AP0074SP2U, D-AP0094SP2U [easuring location] Under air intake [External static pressure Pa] 6.56 ft (2 m) Fan tap Air discharge Duct Center 4.92 ft (.5 m) Air intake icrophone NC- NC Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC Octave band center frequency (z) NC Octave band center frequency (z) NC- NC- 4

15 E5-3I D-AP 4SP2U D-AP024SP2U [easuring location] Under air intake [External static pressure Pa] 6.56 ft (2 m) Fan tap Air discharge Duct Center 4.92 ft (.5 m) Air intake icrophone NC NC- Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap Octave band center frequency (z) NC- NC Octave band center frequency (z) NC- NC- 5

16 D-AP 4SP2U E5-3I D-AP054SP2U [easuring location] Under air intake [External static pressure Pa] 6.56 ft (2 m) Fan tap Air discharge Duct Center 4.92 ft (.5 m) Air intake icrophone NC- NC Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC Octave band center frequency (z) NC Octave band center frequency (z) NC- NC- 6

17 E5-3I D-AP 4SP2U D-AP084SP2U [easuring location] Under air intake [External static pressure Pa] 6.56 ft (2 m) Fan tap Air discharge Duct Center 4.92 ft (.5 m) Air intake icrophone NC- NC Octave band center frequency (z) [External static pressure 35 Pa] Fan tap [External static pressure Pa] Fan tap NC Octave band center frequency (z) NC Octave band center frequency (z) NC- NC- 7

18 D-AP 4SP2U E5-3I. Accessories Optional part for Slim Ducted type Auxiliary fresh air TCB-FFURU Parts Name odel Name Applied odel Note Auxiliary fresh air flange TCB-FFURU D-AP0074 to 084SP2U For Fresh Air Intake by using the knockout hole (dia.=3.94") 8

19 E5-3I D-AP 4SP2U. Reference - Fresh Air Intake D-AP0074SP2U, AP0094SP2U, AP024SP2U Caution The fresh air shall be conditioned by heat reclaim ventilator or similar. Ensure the fresh air flow rate is determined so that mixed suction air and fresh air maintain the operating temperature. * Recommended conditioned air temperature is 53.6 F to 86 F. owever, make a fresh air flow rate within % of standard. odel name D-AP0074SP2U D-AP0094SP2U D-AP024SP2U Standard air flow (cfm) Install a air filter within the fresh air duct. (Fresh air does not pass through the filter of Indoor unit.) Insulate the fresh air duct. Electrically connect the fan of the eat exchanger unit and the Indoor unit to a single isolator. Static pressure (in.wg) Fresh air flow (cfm) Indoor unit Duct fan motor Fresh air Flange option: TCB-FURU Inter - lock circuit Connect the driving relay of the duct fan (DC 2V) between and 6 on the indoor P.C. board. (Rated current of the relay for duct fan should be up to 75 ma.) After installation, carry out a test run to check that the duct fan of the indoor unit start/stop simultaneously. (Carry out the test run following the installation manual of the indoor unit.) 9

20 D-AP 4SP2U E5-3I D-AP054SP2U, AP084SP2U Caution The fresh air shall be conditioned by heat reclaim ventilator or similar. Ensure the fresh air flow rate is determined so that mixed suction air and fresh air maintain the operating temperature. * Recommended conditioned air temperature is 53.6 F to 86 F. owever, make a fresh air flow rate within % of standard. odel name D-AP054SP2U D-AP084SP2U Standard air flow (cfm) Install a air filter within the fresh air duct. (Fresh air does not pass through the filter of Indoor unit.) Insulate the fresh air duct. Electrically connect the fan of the eat exchanger unit and the Indoor unit to a single isolator. Static Pressure (in.wg) AP05 AP Fresh Air flow (cfm) Indoor unit Duct fan motor Fresh air Flange option: TCB-FURU Inter - lock circuit Connect the driving relay of the duct fan (DC 2V) between and 6 on the indoor P.C. board. (Rated current of the relay for duct fan should be up to 75 ma.) After installation, carry out a test run to check that the duct fan of the indoor unit start/stop simultaneously. (Carry out the test run following the installation manual of the indoor unit.)

21 EO

22 EO

23 EO

24 Slim Ducted type Engineering Data Book odel name: D-AP 4SP2U arch, 6 First Edition