Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3" 12" Fabricated in Sizes 10" 36"
|
|
- Vanessa Nelson
- 5 years ago
- Views:
Transcription
1 Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes " " Fabricated in Sizes 0" " Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry. They conform to all municipal, federal, and military requirements. They are tested for joint tightness, internal stress and dimensional stability. The Series is engineered for the harsh environment of construction, shipping, handling and installation. ed below are some of the uses of Solvent Weld Sewer fittings: Onsite Disposal Closed loop septic fields Open system septic fields Engineered systems Laterals to Municipal Sewers (sanitary & storm) Surface Drainage Foundation Drains Radon Gas Venting Yard Drainage Downspouts ool Drainage Area Drainage Landscape Drainage Certifications Royal lastic Trends Solvent Weld Sewer fittings are third party tested and listed by NSF, UC, and CSA to meet specifications defined in ASTM D and CSA B.. Short Specs " through " injection molded solvent weld SDR 5 sewer fittings shall be manufactured in accordance with ASTM D and CSA B.. They shall be molded from virgin VC compound having a minimum cell classification of 5 or in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D7. Injection molded solvent weld SDR 5 Sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D, and, in applicable configurations by the International Association of lumbing and Municipal Officials (IAMO) to meet the requirements of the Uniform lumbing Code (UC) as applicable, and by the Canadian Standards Association (CSA) to meet CSA B.. ATTENTION: Royal Building roducts fittings are not to be used with compressed air or gases. Royal does not recommend that piping systems that include its products be tested with compressed air or gases. Third y Tested Royal Building roducts (formerly lastic Trends) 500 Mound Road Shelby Twp., MI Toll Free: Fax:
2 00590 Straight Tee HxHxH * x * x * x * x * x * x * x *0 x *0 x *0 x *0 x 0 * x * x * x * x 0 * x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x ,0.,.0,59.0,999.07,09.9,.7,50.7,.0,9.5,.5,0.5,05.7,.,5.0,79.7,0.5,0.5 5,9.,5.7 5,7.7 5,5.7 5,57. 5,9. 5,77.9 7,95.9 9,90.5,00.9 5,5. 5,559.,.9,7.9 7,9.,9.,.9 0,50.9 0,759.0,.77 7,0. 7,.95,55.05,577. 9,79.0 0, ,9.0,7.,5.9,. 7, ,. 9,50.5 0,.,07.70,7.,0.0,9.9,.05,.5,90. 5,. 5 Degree Wye HxHxH * x * x * x * x * x * x * x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x , ,95.,9.,5.70,00.,099.0,7.75,7.9,.,9.7,59.,05.,09.,.,5.9,0.,. 5,0.0,9.59,055., ,.0 5,79.9 5,50.7 5,979.,0.,.7 9,755.,.9 5,0. 5,7.9,05.5 7,00. 7,.0,5.9 9,9.7,0.0, ,57. 7,5. 7,50.,75.5 9, ,.0,7.7,9.0,7.0,57.5 5,0.,9. 9,97.0 9,97.5,.5,97.09,097.9,7. 5,5. 5,05.5 9,7.95 9,7.5,05.55 age Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable
3 Solvent Weld Sewer Fittings SDR 5 Straight Tee SxHxH x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x , ,00.0,.70,0.05,5.,79.9,9.9,79.,9.,5.,.,9.7,00.9,.9,509.5,775.7,0.9,.,7. 5,5.7,. 5,005.,7.7,.0,07.,5.5,59. 9,0. 0,.,70.05,55.0,9. 7,9. 7,75.90,9.7 9,75. 9,709.0,.0,7.7 7,055.,.5,5.5 9,7. 9,. 0,75.97,7.,77.05,50. 5,99.5,9.5 0,.7 0,.5 0,9.7,7.,.5,5.5,9.,59. 7,09.7,.79,7.5, Degree Wye SxHxH * x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x ,.,5. 9.7,0.0,7.9,00.07,797.,70.0,.7,9.,.9,77.7,79.0,9.7,50.,7.,7.9,.97,7.5 5,55. 5,9.55 7,00.5 9,.5 5,55.,.5,0.7,7.05,75.97,9.5 9,55.7,.,5.07,7.79,7.7 7,.5,059.9,. 9, ,99.9,77.5,. 7,90.5,57.9,. 0,05.9 0,57.0,5.7,7.9,00.9,.9,9. 7,.9,75.,0.,7.0,09.0,77. 5,0. 7,00.0 7,. 7,95.9,0.,5.,. Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable age
4 00590 * x * x * x * x * x * x * x 0 x 0 x 0 x x x x 5 x 5 x 5 x x x x x x x x x x 7 x 7 x 7 x x x x x x x Sanitary Tee (TY) HxHxH TY ,07.0.,0.5,55.5,0.9,.9,.,70.,0.7,.5, ,97.9,0.5,09.55,9.05 7,5. 7,9.7 7,7.0 9,.0 0,.9 0,75.,957.9 x x x x x x x 0 x 0 x 0 x x x x 5 x 5 x 5 x x x x x x x x x x 7 x 7 x 7 x x x x x x x Combo Wye & / Bend HxHxH ( iece) ,0.5,.,.,.7,0.7,0.05,.,00.99,59.9 5,95. 5,97.7 5,. 5,9.,77. 7,0. 7,50.,. 9,9. 0,05.0,5. Sanitary Tee (TY) SxHxH x x x x x x 0 x 0 x 0 x x x x 5 x 5 x 5 x x x x x x x x x x 7 x 7 x 7 x x x x x x x , ,7.9,05.05,7.,.,5.57,.0,7.,.5,9.90,5.7 5,75.95,05.0,99. 7,00. 7,0.0,7.5 9,00. 9,057. 0,559.77,97.5,0.7,75.5 Tee Cross HxHxHxH * x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 7 x 7 x ,09.9,9.0,9.0,.,7.0,5.7,90.0,5.5,59.0,79.5,0.,.,57.79,.0 5,5.5,9.,9.7 5,5. 7,. 7,0. 7,. Cleanout Tee HxHxFIT * x x Way Cleanout HxHxH * x x age Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable
5 Solvent Weld Sewer Fittings SDR 5 x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x x Double Sanitary Tee (TY) HxHxHxH ,0.5, ,50.5,70.,070.9,0.7,9.,757.0,5.7,.5,5.5,5.,079.,.7,.7,5., ,05.59,.07, ,7. 5,90.,.5 7,5.5,. 9,5.,. 7,99.7,5.,57.5 9,0.5 9,99.5,9. 5,9.0 9, ,90.,7. 0,00.7,9.7,79.,0.,9.,90.9 0,9.9,7.0 0,7.05 0,.,55.,.9 7,7. 0,0.0 0,5.,.7,.,5.5 0,57.,5.79,.7,7. 0,5.9,70.0 5,0. 5,55.0,.,5.5 0,57. 5,07.,9.55 * x * x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x 5 x 5 x 5 x 5 x 0 5 x 5 x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x x x x x 0 x x 5 x x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x 7 x 7 x x x x 0 x x 5 x x x x 7 x x x x x 0 x x 5 x x x x 7 x x Double 5 Degree Wye HxHxHxH , ,5.9,5.9,7.,.9,505.,7.5,07.7,.05,9.5,7.7,9.,.,.7,.,0.7,7.7,95.79,7.9 5,.,00.7,75.0,0.77 9,.5,9. 5,9. 7,0.7,0.77,.9,9. 9,.5,9.7, ,7.7 7,5. 7,0. 9,57.9 0,.,95.0,09.,07.5,.5,.5 7,5.5 9,9.7 0,.5,.,05., ,.9,7.5 0,50.50,79.,9.50,07.,9.,. 5,9.9 7,. 9,.9,9.,. 5,7.5,.5,77.9 7, ,70.55 Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable age 5
6 00590 * * * * *0 * * * * * * * * * *0 * / Bend (90) HxH / Bend (90) SxH ,09.75,5.9,.,.,09.7,05.9 7,9.00 9, ,7.55,.,50.0,77.,79.7,. 7, * * * * *0 * * * * * * * * * *0 * / Bend (90) HxH Long Sweep / Bend (90) SxH Long Sweep / Bend (5) HxH / Bend (5) SxH / Bend (5) HxH (Extra Long Sweep Radius) / Bend (5) SxH (Extra Long Sweep Radius) , ,0.9,.9,.5,.,09.7,05.9 9,5., ,.,50.0,77.,70.,. 7, / Bend () HxH / Bend () SxH * * * * *0 * ,77.77,.,7.5,.,7.97,0.5,00. / Bend (.5) HxH / Bend (.5) SxH ,.0,.,50.0,77.,79.7,. 7, * * * * *0 * / Bend (.5) HxH (Extra Long Sweep Radius) / Bend (.5) SxH (Extra Long Sweep Radius) 90S 90S 90S ,77.77,.,7.5,.,7.97,0.5, ,5.,.,50.0,77.,79.7,. 7, age Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable
7 * * * * *0 * 5 7 * * * *0 * 5 7 x x x 0 x 0 x 0 x x x x x 0 5 x 5 x 5 x 5 x 0 5 x x x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x G G G G0 G L5 L L L L7 L L ,9.5,.,70.,5.9,.,70., ,.9,05.5,0.5,50.50, ,9.75,5.,755.0,9.90, , ,07.7,07.55,.,0.77,0.5,9.5,.,0.5,.0,.,57.,5.,59.7,.99,7.55,7.0,90.5,5.5 Solvent Weld Sewer Fittings SDR 5 / Bend (.5) HxH / Bend (.5) SxH Cap (H) Spigot lug (S) Eccentric Reducer Coupling HxH Stop Coupling HxH Drain Grate (S) * * * * *0 * 5 7 * * * * x x x 0 x 0 x 0 x x x x x 0 5 x 5 x 5 x 5 x 0 5 x x x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x Eccentric Reducer Bushing SxH ,9.5,.,70.,5.9,.,70., ,9.7,0.,5.9,.9 5,7., ,09.7,09.9,0.,.,0.7,9.,5.,5.,5.,575.9,5.0,9.90,7.0,.5,70.7 Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable age 7
8 * x * x * x * x * x * x *0 x *0 x *0 x * x * x * x * x 0 5 x 5 x 5 x 5 x 0 5 x x x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x x x x x 0 x x 5 x x x x 7 x x x x 0 x x 5 x x x x 7 x Concentric Reducer Coupling HxH Cast Iron ipe Adapter HxH C.I. Hub x Sewer Hub , ,07.5,07.55,.,0.77,0.5,9.5,.,0.5,.0,.,57.,5.,59.7,.99,7.55,7.0,90.5,5.5,9.,705.,7.,75.77,907.59,9.,0.7,0.,99.,7.,.0,.9 5,7. 7,. 9,9.9,99. 5,. 9,9.0,955.0,.,5.5 5,75.0 7,9. 9,9.7,95. 5,. 9,5.77 5,07.0,090.9,07.5 * x * x * x * x * x * x *0 x *0 x *0 x * x * x * x * x 0 5 x 5 x 5 x 5 x 0 5 x x x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x x x x x 0 x x 5 x x x x 7 x x x x 0 x x 5 x x x x 7 x ,09.7,09.9,0.,.,0.7,9.,5.,5.,5.,575.9,5.0,9.90,7.0,.5,70.7,7.,5.,50.0,55.,557.9,700.7,.55,.,95.9,5.,.7,07.0 5,.,7.5,0.79 0,9.7, ,9.9,97.7,0.9,07.0 5,.,7.5,770.0,5.,.0,7.7,55.9,99. 9,577.7 * 70. * Concentric Reducer Bushing SxH Clay ipe Adapter HxH Clay Hub x Sewer Hub age Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable
9 * x * x * x * x x 0 x 0 x 0 x * x * x * x x 0 x 0 x * x * x * x * x G G G G DWV Adapter Coupling HxH Solvent Sewer Hub x Solvent DWV Hub DWV Adapter Sleeve SxH DWV Spigot x Solvent Sewer Hub Gasketed Sewer Adapter HxG Solvent Sewer Hub x Gasket Sewer Hub Solvent Weld Sewer Fittings SDR 5 * x / * x * x / * x * x * x * x * x * x * x * x * x 0 x 0 x * x * x * x G9 G9 G9 G9 L90 L9 G90 G90 G90 DWV Adapter Bushing SxH Solvent Sewer Spigot x Solvent DWV Hub DWV Adapter Bushing SxH Chamfer (Long) Sewer Spigot x Solvent DWV Hub Gasketed Sewer Adapter SxG Solvent Sewer Spigot x Gasket Sewer Hub Gasketed DWV Adapter Coupling GxDWV G SDR Gasket Sewer Hub x Gasket DWV Hub * x * x * x H57 H5 H Gasketed DWV Adapter Bushing SxDWV G SDR Chamfer Sewer Spigot x Gasket DWV Hub * x * x * x H H H Gasketed DWV Adapter Coupling HxDWV G SDR Solvent Sewer Hub x Gasket DWV Hub * x * x * x H95 H95 H DWV Adapter Sleeve SxH Solvent DWV Spigot x SDR Solvent Sewer Hub * x * x x H0 H09 H Corrugated ipe Adapter SxH Corrugated Spigot x Solvent Sewer Hub Solvent Sewer Hub Adapter SxH Chamfer Sewer Spigot x Solvent Sewer Hub * x 7. * x G9.0 x G9 59. x G9 7. InLine Backwater Valve HxH x x x 0 x 0 x 5 x ,0.,.95, ,09.0 Terminal Backwater Valve (H) x x x Downspout Adapter (H) Downspout x Solvent Sewer Hub * x x * x x * x x * x x Note: Last dimension is pipe dimension Flushmount Downspout Adapter (H) Flushmount Downspout x Solvent Sewer Hub * x x 9 * x x 9 * x x 9 * x x 9 Note: Last dimension is pipe dimension Corrugated Flushmount Downspout Adapter (S) Flushmount Downspout x Corrugated Spigot * x x 9 * x x 9 * x x 9 Note: Last dimension is pipe dimension Male Adapter Solvent Sewer Hub x Male ipe Thread * * * Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable age 9
10 00590 Threaded lug Raised * * * * *0 * * x * x * x * x *0 x 0 * x x x x 0 x 0 x x x x x 0 x 0 x * * Female Adapter (Hub x FIT) SN SN ,09.7 Female Adapter with Countersunk lug (Hub x FIT) Female Adapter with Raised lug (Hub x FIT) IntelliCap with M Marker , , * * * *0 * * x * x * x * x *0 x 0 * x x x x 0 x 0 x x x x x 0 x x * * Threaded lug Countersunk 0 Fitting Cleanout (Spigot x FIT) SN SN Fitting Cleanout with Countersunk lug (Spigot x FIT) Fitting Cleanout with Raised lug (Spigot x FIT) IntelliDisc with M Marker , , Skirt Gasket for Saddle Tee " Inlet " Inlet G500 G Stainless Steel Clamp (Standard) 9/" Width Not to exceed 00 in/lb torque.0. Skirt Gasket for Saddle Wye " Inlet " Inlet G505 G Saddle Tee with DWV Inlet and SS Clamps Solvent Skirt x Solvent DWV Inlet x x x 0 x 0 x x x 5 x 5 x x x x x x x 7 x 7 x x x x x 0D 0D 0D 0D 0D D D 5D 5D D D D D D D 7D 7D D D D D Saddle Wye with DWV Inlet and SS Clamps Solvent Skirt x Solvent DWV Inlet x x x 0 x 0 x x x 5 x 5 x x x x x x x 7 x 7 x x x x x D D D D D D D 5D 5D D D D D D D 7D 7D D D D D age 0 Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable
11 * x * x * x *0 x *0 x 0 x * x * x x x 0 *5 x *5 x 5 x 5 x 0 5 x * x * x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x x x x x 0 x x 5 x x x x 7 x x x x 0 x x 5 x x x x 7 x * x * x * x Saddle Tee with Stainless Steel Clamps Extended Solvent Skirt x Solvent Sewer Inlet ,0.59, ,0.,0.0, ,090.,.,900., ,0.0,.75,77.5,995.,9.07, ,09.,0.9,.9,095.7,07.7,09.77,799.7 Saddle Tee with Locator Ring and SS Clamps Extended Solvent Skirt with Locator Ring x Solvent Sewer Inlet Solvent Weld Sewer Fittings SDR 5 * x * x * x *0 x *0 x 0 x * x * x x x 0 *5 x *5 x 5 x 5 x 0 5 x x x x x 0 x x 5 x x x x 0 x x 5 x x x x x 0 x x 5 x x 7 x 7 x 7 x 7 x 0 7 x 7 x 5 7 x 7 x 7 x x x x x 0 x x 5 x x x x 7 x x x x 0 x x 5 x x x x 7 x * x * x Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Solvent Sewer Inlet , ,0.0, ,00.99,.,50.,50., ,059.,.,7.99,5.79,90., ,.0,.75,.,59.9,99.,.5, ,.00,.,5.,7.,09.5,55.99,5.9, ,.0,9.0,.,7.,0.5,.7,77.5,.0,.5 Saddle Wye with Locator Ring and SS Clamps Extended Solvent Skirt with Locator Ring x Solvent Sewer Inlet Specifications: ASTM D, F79, CSA B. NonStock items are noncancelable, nonreturnable age
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36
Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes Fabricated in Sizes 0 Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry. They
More informationSam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.
More informationSeries P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
More informationThird Party Tested. Sam Roberts & Associates, Inc.
Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"
eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed
More informationPVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
More informationPVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
More informationPVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
More informationPVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE OCTOBER 1, 2018 DWV-PVC 2 x FPT x MPT
More informationPipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE JANUARY 2, 2019 DWV-PVC 2 x FPT x MPT
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices
Discount Codes 07 DWV-PVC through 8 22 VAC Corrected Pricing hi-lited in Yellow DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: July 1, 2014 x FPT KEY:...ub
More informationPIPE FITTINGS - PLASTIC - ABS/DWV ARH A
PIPE FITTINGS - PLASTIC - ABS/DWV ARH 172-251A NIBCO DRAINAGE FITTINGS AUG 7 2015 VENDOR NUMBER 039923 CANCELS APR 3 2015 SOIL PIPE ADAPTER, CAST IRON - Hub x Hub 19400 5800 2" $23.66 $47.32 + 19402 5800
More informationAir-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
More informationADAPTERS. Fig. No. Packaging C $ C x 1 1 / Fig. No.
PVC DWV FITTINGS SUGGESTED LIST PRICES PDWV-0918 Effective September 4, 2018 Supercedes PDWV-0318 of March 19, 2018 Prices and MTO status subject to change without notice Visit our website for the most
More informationSincerely, Your Partners at Specified Fittings
N E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
More informationMacon Plastics, Inc. Solvent Weld SCH 40/80 DWV
Catalog #210SDWV MP Macon Plastics, Inc. & DWV Fittings P R I C E L I S T Solvent Weld /80 DWV Effective Date: 02/02/15 Catalog : 210SDWV Revision: D Supercedes: 209SDWV Not sure if you have a current
More informationSincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
More informationCITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
More informationORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
More informationSCHEDULE 80 PVC. List Prices
SCHEDULE 80 PVC List Prices Effective: May 28, 2001 Revised June 2003 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints,
More informationBS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS
Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)
More informationSCHEDULE 40 PVC. List Prices
SCHEDULE 40 PVC List Prices Effective: November 14, 2005 Tee 401-003 3/8 100 1.99 401-005 0.64 401-007 0.73 401-010 1 50 1.38 401-012 1 1 /4 25 2.15 401-015 1 1 /2 25 2.61 401-020 2 25 3.80 401-025 2 1
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING
ICC-ES Report PMG-1082 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE
More informationDuo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
More informationPipes and fittings. Drain,Waste & Vent (DWV)
K e y P l a s t i c s I n n o v a t i v e d e s i g n & e x c e p t i o n a l s e r v i c e Pipes and fittings Drain,Waste & Vent (DWV) DWV Pipes and Fittings Contents 3 Pipes 4 Plain, I.O & Access Bends
More information2.1 PVC PIPE & FITTINGS DRAINAGE
2.1 pvc DRAINAGE pipe & fittings NOVADRAIN & SUPERTUFF EXTRA Drain Waste and Vent Pipes for Sewer and Drain (NON-PRESSURE APPLICATIONS ONLY) Compliance: Manufactured in accordance with AS / NZS 1260:1999
More informationContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More informationDWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS >
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > CSA B181.2 System 15 CAN/ULC S102.2 PVC is the most frequently specified
More informationDR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY
LIST PC920180410 HARCO LIST ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version of this price list LIST PC920180410 HARCO LIST
More informationSCHEDULE 80 CPVC. List Prices
SCHEDULE 80 CPVC List Prices Effective: September 26, 2010 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in CPVC fittings joints, can cause
More informationWITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
More informationDWV Systems Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > System 15 CSA B181.2 System XFR CAN/ULC S102.2 introduction PVC is the
More informationSpecialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage
Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and
More informationSpears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationPVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Product Catalogue www.ipexinc.com ISSUE DATE: APRIL 2011 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough
More informationPVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationUnitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
More informationBevel Seat. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN. we strive to:
BEVEL SEAT FITTINGS Bevel Seat For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence,
More informationWrot and Cast Pressure Fittings
Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................
More informationCall us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More informationSCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
More informationTerms And Conditions Of Sale
N E S Specified Fittings E S Washington Location Specified Fittings 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location Specified Fittings 483 Airport
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More information259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: Fax:
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: 01276 600200 Email: info@nfi.uk.com Fax: 01276 600161 NFI UK LTD NFI UK Harsh Environment Fibre Optic Connectors NFI UK harsh environment connectors
More informationChemDrain. ChemDrain CPVC Chemical Waste Drain System DIMENSIONAL CATALOG. (Updated November 13, 2018) DC-CD
DMESOAL AALOG hemdrain hemdrain PV hemical Waste Drain System (Updated ovember 13, 2018) 2005-2018 harlotte Pipe and Foundry ompany D-D hemdrain PV hemical Waste Drain System Dimensions All products manufactured
More informationDRAINAGE PRODUCTS CATALOG
DRAINAGE PRODUCTS CATALOG 12 Round Drainage Boes 12 Standard Flat Grate Part #: 3017-GE 12 Flat Cover Part #: 3017-C The Polylok Drainage Bo is the most versatile bo on the market today. You can choose
More informationCPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexinc.com ISSUE DATE: APRIL 2015 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexna.com ISSUE DATE: NOVEMBER 2017 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationCONSTRUCTION & DEVELOPMENT MANUAL SUMTER COUNTY, FLORIDA
CONSTRUCTION & DEVELOPMENT MANUAL SUMTER COUNTY, FLORIDA Original: June 1, 2004 Revised: May 31, 2005 Revised: August 8, 2006 Revised: September 1, 2006 Revised: August 20, 2007 Revised: November 1, 2011
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue ISSUE DATE: SEPTEMBER 2016 We build tough products for tough environments. Bookmark Our Website www.ipexna.com PRODUCT INFO, TECHNICAL DOCUMENTS, ON-SIGHT TRAINING & MUCH
More informationPoly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
More informationThe Trade Soil & Waste Product Guide
The Trade Soil & Waste Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Trade Soil & Waste Product Guide. This
More informationBottom Loading & Recirculation Adapters
SM6958 March 2010 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: None Maintenance & Repair Manual Bottom Loading & Recirculation Adapters
More informationPost Office Box Tampa, FL (813) FAX (813)
Post Office Box 16039 - Tampa, FL 33687-6039 (813) 740-1144 - FAX (813) 627-9387 August 13, 2008 Contractor Attn: Estimating EXAMPLE TAKE-OFF Project: CENTRAL PASCO WATER SYSTEM IMPROVEMENTS - BOYETTE
More informationSection 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as
More informationCLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexna.com ISSUE DATE: MAY 2018 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationBLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
More informationPrice Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationR-4028 Cast Iron Underdrain. R-4030 to R-4040 Series
For a complete listing of FREE OPEN AREAS and PERIMETERS of all grates, refer to pages 306-311. R-4028 Cast Iron Underdrain Drawing demonstrates cast iron underdrain sections used along railroad right-of-way.
More informationTown North Sanitary Sewer Renewal PROJECT NO. WUSR09002 Gra-Tex Utilities, Inc Jackson Construction LTD ARK Conracting Services, LLC Tri-Tech Constru
PROJECT NO. WUSR09002 Gra-Tex Utilities, Inc Jackson Construction LTD ARK Conracting Services, LLC Tri-Tech Constru Bids Opened: Ju uly 19 Arlington, TX Fort Worth, TX Kennedale, TX Kennedale, TX Item
More informationUSA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
More informationSUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION
A SUBSIDIARY F PNEUTECH GRUP SUPERIR ALUMINIUM CMPRESSED AIR RETICULATIN INDUSTRIAL AIR SYSTEMS NZ FREEPHNE: Email: sales@industrialair.co.nz Web: www.industrialair.co.nz SUPERIR ALUMINIUM CMPRESSED AIR
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationWELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationSTEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
More informationIRRIGATION DIVISION PRODUCTS CATALOG
IRRIGATION DIVISION PRODUCTS CATALOG Irrigation Division For over 45 years, Turf Products has provided high quality irrig on supplies by delivering what you need, when you need it. Our Product Catalog
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0414 Effective April 28, 2014 Supercedes BLZM-0413R of April 22, 2013 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0717 Effective July 31, 2017 Supercedes BLZM-0414 of April 28, 2014 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationDiscount Codes. 05/B5 Inserts - PVC INSERTS - PVC. Cold Water Only. List Prices
Discount Codes 05/B5 s - PVC INSERTS - PVC Cold Water Only List Prices Effective: August 25, 2012 Revised September 2014 2 INSERTS - PVC Products Catalog www.lascofittings.com Pricing Effective August
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationPotable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationB34 SR & SN Medium Duty Commercial&Industrial Regulator
Product Bulletin KG IMAC Systems, Inc. 90 Main Street, PO Box 0 Tullytown, PA 9007 Tel. -800-9-GAS () 9-00 Fax:() 9-98 www.imacsystems.com B SR & SN Medium Duty Benefits Economical Space-saving design
More informationWater Distribution Products. Price List - June 1, 2010
Water Distribution Products Price List - June 1, 2010 2 Elster Perfection Elster Perfection Hydrosert PE Water Fittings Products Hydrosert Mechanical Couplings Hydrosert Elbows 61025 3/4 CTS SDR 9 25 $
More informationPE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
More information