NVR MOBILE SERIES. GPS, Wi-Fi & 3G connection. Up to 2 TB. Up to 4 IP cameras SCATI FENIX

Transcription

1 NVR MOBILE SERIES GPS, Wi-Fi & 3G connection Up to 4 IP cameras Up to 2 TB

2 NVR MOBILE SERIES FENIX mobile series provides powerful monitoring functionalities, including audio and video decoding, Wi-Fi wireless network transmission, satellite positioning service, secure data storage, and hard drive vibration damping. It can cooperate with other devices to build a comprehensive surveillance system. With FENIX software preconfigured, these devices offer a wide range of options for achieving maximum performance from your CCTV system while also efficiently managing storage and bandwidth. The FENIX recorders are fully integrated with the cameras and the applications of the Control Center. This integration provides a complete and scalable video surveillance solution with seamless operation among the solution specifically designed for your needs. Relevant Features and Functions of NVR Series FNM5-4-P2: 3G (WCDMA) providing flexible data transmission solutions; Pluggable GPS (Global Positioning System) module precisely positioning the vehicle via the satellite and recording the location information in the video stream; 4 independent network interfaces connectable to 4 IP cameras; each channel supports up to 1080P resolution with H.264 STD encoding technology; Two 2.5-inch HDDs/SSDs and one SD card pluggable, adopting hard disk vibration damping technology; Backup recording on SD card when the HDDs/SSDs are broken; Information collection interfaces collect driving information such as left/right turn, braking, rolling back Support accessing via WEB browser; Wide-range power input (9 to 32 VDC); Ignition startup and delay (0 h to 6 h) shutdown; Power-off protection prevents key data from loss; Standard 1DIN dimensions; Aluminum die-cast chassis of good heat dissipation performance Hard disk box with USB interface supports intelligent temperature control and data export; 2

3 ORDERING INFORMATION The references for the available FENIX models are specified below. FNM5-4-P2-(X) FNM5-4-P2-1 Video recorder-player and editor for 4 IP cameras with GPS and 3G module. AVAILABLE MODELS FNM5-4-P2-2 Video recorder-player and editor for 4 IP cameras with GPS, 3G module and Wi-Fi. FNM5-4-P2-(X) VIDEO & AUDIO INPUT/OUTPUT IP video input 4-ch Audio input/output 4-ch / 2-ch VGA output 1-ch. Resolution: /60Hz, /60Hz, /60Hz, /60Hz CVBS output 2-ch. Resolution: PAL: , NTSC: DECODING PARAMETERS Video compression H.264 STD Frame rate 25 fps (PAL)/30 (NTSC) Audio compression G.711 Playback Local playback: single channel playback; Web playback: single channel playback and multi-channel synchronous playback. Type Capacity Protection Backup HARD DISK Two 2.5-inch SATA HDDs/SSDs Up to 1TB capacity for each disk supported 3-generation hard disk box USB interfaces on hard disk box and device front panel supporting data backup WIRELESS NETWORK & POSITIONING 3G Wi-Fi GNSS WCDMA b/g/n supported, 2.4GHz GPS EXTERNAL INTERFACE Two-way audio 1-ch, G. 722 Sensor-in 4 high/low level signal inputs; 1 pulse signal input (reserved) Alarm input/output 3 high/low level signal inputs / 2 signal outputs Network interface 1 RJ45 10M/100M self-adaptive Ethernet interface. Serial interface 1 RS-232 interface. 1 RS-422 interface, including reserved auto announcer interface. USB interface 1 USB2.0 interface on the front panel; 1 USB 5-pin aviation plug on the rear panel. PoE interface 4 RJ45 10M/100M self-adaptive PoE interfaces. SIM card 1, standard SIM card slot SD card 1, standard SD card slot GENERAL Operating system Embedded Linux operation system Operating method Local operation, IR remote control, Web operation Power supply 9 to 32 VDC Consumption Standby: Max. 0.5W; Full load: Max.20W (without IP cameras or hard disks) Working temperature -10 ºC to +55 ºC (+14 ºF to +131 ºF) Working humidity 10% to 90% Dimensions (W D H) 178 mm 170 mm 50 mm (7.0" 6.7" 2.0") Weight 1.6 kg (3.53 lb) (without hard disk or SSD) All characteristics and technical specifications may be subject to modifications considered necessary by the manufacturer to improve the product. The information in this datasheet is indicative and is declared to be valid except for typographic errors. All brand and product names in this datasheet are property of Scati labs, S.A. and their use without prior permission is strictly forbidden. For further information, please contact info@scati.com Rev.0 3

4 NVR MOBILE SERIES GPS, Wi-Fi & 3G connection Up to 8 IP cameras Up to 2 TB

5 NVR MOBILE SERIES FENIX mobile series provides powerful monitoring functionalities, including audio and video decoding, Wi-Fi wireless network transmission, satellite positioning service, secure data storage, and hard drive vibration damping. It can cooperate with other devices to build a comprehensive surveillance system. With FENIX software preconfigured, these devices offer a wide range of options for achieving maximum performance from your CCTV system while also efficiently managing storage and bandwidth. The FENIX recorders are fully integrated with the cameras and the applications of the Control Center. This integration provides a complete and scalable video surveillance solution with seamless operation among the solution specifically designed for your needs. Relevant Features and Functions of NVR Mobile Series FNM7-8-PS2: 3G (WCDMA) providing flexible data transmission solutions. GPS (Global Positioning System) module precisely positioning the vehicle via the satellite and recording the location information in the video stream. WIFI module providing flexible data transmission solutions. IP camera connection with SCATI private protocol and ONVIF protocol supported. 8 independent network interfaces connectable to 8 IP cameras; each channel supports up to 1080P resolution with H.264 STD encoding technology. Two pluggable 2.5-inch HDDs/SSDs, adopting hard disk vibration damping technology. Information collection interfaces collect driving information such as left/right turn, braking, rolling back Wide-range power input (9 to 32 VDC). Ignition startup and delay (0 h to 6 h) shutdown. Power-off protection prevents key data from loss. Specialized aviation plugs ensure signal stability. Aluminum die-cast chassis of good heat dissipation performance. Hard disk box with USB interface supports intelligent temperature control and data export. 2

6 ORDERING INFORMATION The references for the available FENIX models are specified below. FNM7-8-PS2-(X) FNM7-8-PS2-1 Video recorder-player and editor for 8 IP cameras with GPS and 3G module. AVAILABLE MODELS FNM7-8-PS2-2 Video recorder-player and editor for 8 IP cameras with GPS, 3G module and Wi-Fi. FNM7-8-PS2-(X) VIDEO & AUDIO INPUT/OUTPUT IP video input 8-ch Audio input 8-ch VGA output 1-ch. Resolution: /60Hz, /60Hz, /60Hz, /60Hz CVBS output 3-ch Aviation plug (1.0 Vp-p, 75 Ω);. Resolution: PAL: , NTSC: Audio output 3-ch Aviation plug (linear level,600 Ω) DECODING PARAMETERS Video compression H.264 STD Frame rate 25 fps (PAL)/30 (NTSC) Audio compression G.711 Playback Local playback: single channel playback Type Capacity HARD DISK Two 2.5-inch SATA HDDs/SSDs Up to 1TB capacity for each disk supported WIRELESS NETWORK & POSITIONING Dialing Wi-Fi GNSS WCDMA and FDD-LTE module are supported 1, 3G/4G dialing antenna b/g/n supported, 2.4GHz, only on FNM7-8-PS2-2 model 1 navigation satellite antenna interface for GPS EXTERNAL INTERFACE Two-way audio 1-ch, G. 722 Sensor-in 4 high/low level signal inputs; 1 pulse signal input (reserved) Alarm input 3 high/low level signal inputs Alarm output 2 signal outputs Network interface 1 RJ45 10M/100M self-adaptive Ethernet interface. Serial interface 1 RS-232, 1 RS-422, USB interface 1 USB2.0 interface on the front panel PoE interface 8 RJ45 10M/100M self-adaptive PoE interfaces, 802.3af, Total consumption: 40W esata interface 1 SIM card 1, standard SIM card slot GENERAL Operating system Embedded Linux operation system Operating method Local operation, IR remote control, Web operation Power supply 9 to 32 VDC Consumption Standby: Max. 0.5W; Full load: Max.20W (without IP cameras or hard disks) Working temperature -10 ºC to +55 ºC (+14 ºF to +131 ºF) Working humidity 10% to 90% Dimensions (W D H) 245.8mm 202mm 86.87mm Weight 3.5kg (7.72 lb) (without hard disk or SSD) All characteristics and technical specifications may be subject to modifications considered necessary by the manufacturer to improve the product. The information in this datasheet is indicative and is declared to be valid except for typographic errors. All brand and product names in this datasheet are property of Scati labs, S.A. and their use without prior permission is strictly forbidden. For further information, please contact info@scati.com Rev.0 3

7 NVR MOBILE SERIES GPS, 3G & Wi-Fi connection Up to 16 IP cameras Up to 6 TB

8 NVR MOBILE SERIES FENIX mobile series provides powerful monitoring functionalities, including audio and video decoding, Wi-Fi wireless network transmission, satellite positioning service, secure data storage, and hard drive vibration damping. It can cooperate with other devices to build a comprehensive surveillance system. Thanks to the features of high stability, easy-to-carry and low power consumption, the FNM3-R116- A6 rail NVR series are widely applied to the surveillance projects of rail transportations. Relevant Features and Functions of NVR Mobile Series FNM3-R116-A6: User-friendly GUI providing easy and flexible operations. GPS (Global Positioning System) embedded module precisely positioning the vehicle via the satellite and recording the location information in the video stream. Wi-Fi and 3G connection available. IP camera connection with SCATI private protocol and ONVIF protocol supported. 2 Gigabit network interfaces. Each channel supports up to 2Mpx resolution with H.264 STD encoding technology. 6 pluggable 2.5-inch HDDs/SSDs, adopting hard drive vibration damping technology. Hard drive caddy with USB interface supporting intelligent temperature control and data export. Specialized aviation connectors ensuring signal stability. Delay (0 to 6h) shutdown and 24-hour scheduled startup/shutdown. Wide-range power input rangers from 60 VDC to 160 VDC. The recommended input is 110 VDC. Power-off protection avoiding key data from loss. Aluminum die-cast chassis with no fan design well adaptable to working environment. Ingress protection: IP54. Provides a new data storage strategy: No file system design makes data storage more stable and writing/reading speed higher. EN certified. 2

9 ORDERING INFORMATION The references for the available FENIX models are specified below. AVAILABLE MODELS FNM3-R116-A6 FNM3-R116-A6 Video and audio recorder for 16 IP cameras with SSD or HDD drives up to 6TB. GPS and Wi-Fi modules embedded. FNM3-R116-A6 VIDEO & AUDIO INPUT/OUTPUT IP video input Audio input VGA output CVBS output Audio output 16-ch 16-ch 1-ch. Resolution: /60Hz, /60Hz, /60Hz, /60Hz 1-ch, BNC interface 1-ch, BNC interface DECODING PARAMETERS Video compression H.264 STD Frame rate 25 fps (PAL)/30 (NTSC) Audio compression G.711 Recording resolution 3MP/1080p/720p Playback Local playback: single channel playback; Web playback: single channel playback and multi-channel synchronous playback. Type Capacity HARD DISK 3 hard drive caddies: (height: 9.5mm) SATA HDDs/SSDs (height: 7mm) SATA HDDs/SSDs Up to 1TB capacity for each disk supported WIRELESS NETWORK & POSITIONING Wi-Fi Dialing GNSS b/g/n supported, 2.4GHz 3G (WCDMA) only in FNM3-R116-A5-2 GPS EXTERNAL INTERFACE Alarm input Alarm output Network interface Serial interface USB interface 8-ch relay signal input 2-ch relay signal output 2 10M/100M/1000M self-adaptive Ethernet interface. One M12 interface for IP camera, and one RJ45 for debugging 1 x D89 2 x USB3.0 GENERAL Operating system Embedded Linux operating system Operating method Local operation, IR remote control, embedded Web server Power supply 110VDC (60 to 160 VDC) Consumption Standby: Max. 0.5W; Full load: Max.20W (without IP cameras or hard disks) Working temperature -10 ºC to +55 ºC Working humidity 10% to 95% Dimensions (W D H) mm Weight 6.5 Kg All characteristics and technical specifications may be subject to modifications considered necessary by the manufacturer to improve the product. The information in this datasheet is indicative and is declared to be valid except for typographic errors. All brand and product names in this datasheet are property of Scati labs, S.A. and their use without prior permission is strictly forbidden. For further information, please contact info@scati.com Rev.0 3

10 HVR MOBILE SERIES GPS, Wi-Fi & 3G connection Up to 4 cameras Up to 1 TB

11 HVR MOBILE SERIES FENIX mobile series provides powerful monitoring functionalities, including audio and video decoding, Wi-Fi wireless network transmission, satellite positioning service, secure data storage, and hard drive vibration damping. It can cooperate with other devices to build a comprehensive surveillance system. With FENIX software preconfigured, these devices offer a wide range of options for achieving maximum performance from your CCTV system while also efficiently managing storage and bandwidth. The FENIX recorders are fully integrated with the cameras and the applications of the Control Center. This integration provides a complete and scalable video surveillance solution with seamless operation among the solution specifically designed for your needs. Relevant Features and Functions of HVR Series FNM5-4-AS1: 3G (WCDMA) providing flexible data transmission solutions. Pluggable GPS (Global Positioning System) module precisely positioning the vehicle via the satellite and recording the location information in the video stream. 4 analog channels of audio & video inputs connectable; each channel supporting up to WD1 resolution with H.264 STD encoding technology. One 2.5-inch HDDs/SSDs and one SD card pluggable, adopting hard disk vibration damping technology. Backup recording on SD card when the HDDs/SSDs are broken. Information collection interfaces collect driving information such as left/right turn, braking, rolling back Support accessing via WEB browser. Wide-range power input (9 to 32 VDC). Ignition startup and delay (0 h to 6 h) shutdown. Power-off protection prevents key data from loss. Standard 1DIN dimensions. Aluminum die-cast chassis of good heat dissipation performance. Hard disk box with USB interface supports intelligent temperature control and data export. 2

12 ORDERING INFORMATION The references for the available FENIX models are specified below. FNM5-4-AS1-(X) FNM5-4-AS1-1 Video recorder-player and editor for 4 IP cameras with GPS and 3G module. AVAILABLE MODELS FNM5-4-AS1-2 Video recorder-player and editor for 4 IP cameras with GPS, 3G module and Wi-Fi. FNM5-4-AS1-(X) VIDEO & AUDIO INPUT/OUTPUT Analog video input 4-ch Audio input/output 4-ch / 1-ch VGA output 1-ch. Resolution: , , , CVBS output 1-ch. Resolution: PAL: , NTSC: DECODING PARAMETERS Video compression H.264 STD Frame rate 25 fps (PAL)/30 (NTSC) Audio compression G.711 Playback Local playback: single channel playback; Web playback: single channel playback and multi-channel synchronous playback. Type Capacity Protection Backup HARD DISK One 2.5-inch SATA HDDs/SSDs Up to 1TB capacity for each disk supported 3-generation hard disk box USB interfaces on hard disk box and device front panel supporting data backup WIRELESS NETWORK & POSITIONING 3G Wi-Fi GNSS WCDMA b/g/n supported, 2.4GHz GPS EXTERNAL INTERFACE Two-way audio 1-ch, G. 722 Sensor-in 4 high/low level signal inputs; 1 pulse signal input (reserved) Alarm input/output 3 high/low level signal inputs / 2 signal outputs Network interface 1 RJ45 10M/100M self-adaptive Ethernet interface Serial interface 1 RS-232 interface, 1 RS-422 interface USB interface 1 USB2.0 interface on the front panel SIM card 1, standard SIM card slot SD card 1, standard SD card slot GENERAL Operating system Embedded Linux operation system Operating method Local operation, IR remote control, Web operation Power supply 9 to 32 VDC Consumption Standby: Max. 0.5W; Full load: Max.20W (without IP cameras or hard disks) Working temperature -10 ºC to +55 ºC (+14 ºF to +131 ºF) Working humidity 10% to 90% Dimensions (W D H) 178 mm 170 mm 50 mm (7.0" 6.7" 2.0") Weight 1.6 kg (3.53 lb) (without hard disk or SSD) All characteristics and technical specifications may be subject to modifications considered necessary by the manufacturer to improve the product. The information in this datasheet is indicative and is declared to be valid except for typographic errors. All brand and product names in this datasheet are property of Scati labs, S.A. and their use without prior permission is strictly forbidden. For further information, please contact info@scati.com Rev.0 3