. 0 Insert Made Cat.-Nr

Transcription

1 Hand tools. Insert Made Cat.-Nr Bicolour insert made of polyethylene (PE), colour black/blue. Resistant against most oils and chemicals thanks to closed-cell design. Contrasting colour and precisely tailored cut-outs ensure that you recognise which tools are missing at once. Application For easy keeping track of, good organisation, and protection of tools in drawers. TCS insert Suitable for tool carts Brand cat.-no. 238 x 32 and 476 x 32 ATORN ATORN HHW HHW HHW Gedore x 348 and 27 x 348 ATORN Sets of measuring tools 1 slide callipers 1 mm, 1 scriber straight/offset, 2 mm, 1 dividers 2 mm, 1 setting angle DIN 87/2, 1 x 1 mm, 1 bevel protractors 12 x 1 mm, 1 tape rule 3 m, 1 measuring rod 3 x 13 x,3 mm, stainless. Complete set empty insert Version TCS insert Slide callipers 7-part analogue 238 x part analogue 264 x part digital 238 x part digital 264 x x x Sets of measuring tools slide callipers 1 mm, 1 micrometer gauge -2 mm, 1 scriber straight/offset, 2 mm, 1 bow spring divider 12 mm, 1 knife-edged straight edge DIN 874, 12 mm, stainless, 1 setting angle DIN 87/1, 1 x 7 mm, stainless, 1 bevelled-edged steel square DIN 87/, 7 x mm, stainless, 1 set of thickness gauges, conical, 2 gauges,,-1, mm, 1 measuring rod 3 x 13 x, mm, stainless. Complete set empty insert Version TCS insert Slide callipers 9-part analogue 264 x part digital 264 x x

2 Tool sets ATORN junior hacksaw, 12 spare saw blades, 1 saw frame without blade, 11 spare saw blades, 1 scriber straight/offset, 2 mm, 1 setting angle DIN 87/2, 2 x 13 mm, 1 tape rule 3 m, 1 measuring rod 3 x 13 x,3 mm, stainless. Sets of saws and laying-out tools TCS insert part 476 x part 27 x x x Sets of files and brushes files flat, semicircular, triangular, square-end, round 2 mm, cut no. 2, 1 file brush, 1 wire brush 3 rows. TCS insert part 476 x part 27 x x x part, angled head 1. Set of double open-end wrenches DIN 311, ISO TCS insert size mm 8-part 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 2 x x x

3 part, ring end with Energy profile and 1 offset. Set of combination wrenches DIN 3113 A, ISO 7738 A Hand tools TCS insert size mm 12-part 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 17 / 19 / x x part, on both sides deeply offset, with Energy profile. Set of offset ring wrenches DIN 838, ISO TCS insert size mm 8-part 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 2 x x x part, chrome-vanadium steel. Set of hexagonal socket wrenches x N hexagonal bits with Energy profile, size, / 7 / 8 / 1 / 13 mm, J 3 bits for Allen screws, size 3 / 4 / mm, 1 ea. reversible ratchet, handle with sliding piece, Cardan joint, 1 ea. extension and 1 mm. v N 11 hexagonal bits with Energy profile, size 1/ 13 / 16 / 17 / 18 / 19 / 22 / 24 / 2 7 / 3 / 32 mm, J 6 bits for Allen screws, size 6 / 8 / 1 / 12 / 14 / 17 mm, 1 ea. reversible ratchet, handle with sliding piece, Cardan joint, 1 ea. extension 12 and 2 mm. TCS insert part 264 x x

4 Tool sets part Long hexagon wrench with ball head in ergonomically-shaped holder. Screwdriver with hexagonal blade with hexagonal shoulder at handle end for using a wrench and multi-component handle with extra large soft zones. Set of screwdrivers/hexagon wrenches J V 9 wrenches size 1, / 2 / 2, / 3 / 4 / / 6 / 8 / 1 mm, Q 3 workshop screwdrivers, x 1 / 6, x 12 / 8 x 1 mm, D 3 Phillips screwdrivers PH 1 / 2 / 3, E 2 Phillips screwdrivers PZ 1 / 2. TCS insert part 264 x x Set of VDE electrician s screwdrivers Q 4 VDE electrician's screwdriver for slotted screws 2, x 7 / 3, x 1 / 4 x 1 /, x 12 mm, D 3 VDE electrician's Phillips screwdriver PH / 1 / 2, Q 1 VDE voltage tester 3, x 7, 1-2 V. TCS insert part 238 x part 264 x x x Set of TORX screwdrivers (for screws with pilot pin) TCS insert Size T 7-part 6 / 7 / 8 / 9 / 1 / 1 / x part 6 / 7 / 8 / 9 / 1 / 1 / x x x

5 967 Set of files/hammering tools Hand tools files flat, semicircular, triangular, square-end, round 2 mm, cut no. 2, 1 machinist's hammer g, 1 plastic hammer, Ø 27 mm, 1 centre punch x 12 mm, 2 drift punches 2 / 3 x 12 mm, 6 drive pin punches 3 / 4 / / 6 / 7 / 8 x 1 mm, 2 flat chisel 18 x 12 / 18 x 1 mm, 1 cape chisel, x 12 mm. TCS insert part 2 x x Set of hammering tools 1 machinist's hammer g, 1 centre punch 4 x 12 mm, 2 drift punches 2 / 3 x 12 mm, 6 drive pin punches 3 / 4 / / 6 / 7 / 8 x 1 mm, 1 flat chisel 18 x 1 mm, 1 cape chisel 6 x 1 mm. TCS insert part 238 x part 264 x x x Performance requires quality. Tool carts by ATORN: ATORN s high-quality workshop furnishings. 9.

6 Tool sets 968 Set of pliers/scissors part Head of pliers and diagonal cutting pliers highly polished, chrome-plated, 2-component grips with handguard. Multi-purpose scissors head made of stainless steel. Waterpump pliers with sliding slip joint, 7-x adjustable, with squeeze protection combination pliers 18 mm, 1 flat round-nosed pliers 2 mm, 1 waterpump pliers 2 mm, 1 diagonal cutting pliers 16 mm, 1 multi-purpose scissors 19 mm. TCS insert part 264 x x Set of VDE electrician's pliers 1 VDE electrician's combination pliers 18 mm, 1 VDE electrician's flat round-nosed pliers 4 offset, 2 mm, 1 VDE electrician's diagonal cutting pliers 16 mm, 1 wire stripping pliers,8-6 mm. TCS insert part 238 x part 264 x x x Set of snap ring (circlip) pliers internal snap ring (circlip) pliers, straight tips, for borehole Ø 8-13 / 12-2 / 19-6 mm, 3 external snap ring (circlip) pliers, straight tips, for shaft Ø 3-1 / 1-2 / 19-6 mm. TCS insert part 238 x part 264 x x x

7 166 Suitable tool holder assortments (see cat.-no ) and suitable tool cabinets (see cat.-no. 821) not included. Tool set (-part) Hand tools 166 v 14 hexagonal socket wrench bits, size 1-32 mm, 1 reversible ratchet, 2 mm, 1 handle with sliding piece, 1 Cardan joint, 2 extensions, 12 / 2 mm, 11 double open-end wrenches, size 6-32 mm, 9 double open-end wrenches, size 6-23 mm, 4 screwdrivers,,4 x 2, x /,6 x 3, x 12 /,8 x 4 x 1 / 1 x, x 1 mm, 4 Phillips screwdrivers, PH 1 / 2, PZ 1 / 2, 1 machinist s hammer, g, 1 plastic hammer, Ø 32 mm, 1 drift punch, Ø 2 mm, 1 flat chisel, blade width 18 mm, 1 cape chisel, blade width 6, mm, 1 combination pliers, 18 mm, 1 waterpump pliers, 24 mm, 1 diagonal cutting pliers, 14 mm part Suitable tool holder assortments (see cat.-no ) and suitable tool cabinets (see cat.-no. 821) not included. Tool set (74 pcs.) adjustable wrench, for size - 27 mm, 21 combination wrenches, size 6-32 mm, 1 tyre lever, mm, 8 ball head hexagon wrench, size 2-1 mm, 4 screwdrivers,,6 x 3, x 1 /,8 x 4, x 9 / 1, x, x 1 / 1,2 x 7 x 12 mm, 2 Phillips screwdrivers, PH 1 / 2, 1 machinist s hammer, g, 1 soft face hammer, Ø 4 mm, 1 centre punch, Ø 4 mm, 2 drift punches, Ø 2 / 3 mm, 3 flat chisels, blade width 18 / 18 / 24 mm, 1 cape chisel, blade width, mm, 1 combination pliers, 18 mm, 1 flat round-nosed pliers, 16 mm, 1 waterpump pliers, 24 mm, 1 diagonal cutting pliers, 14 mm, 1 pocket slide calliper, 1 mm, 1 scriber, 1 flat steel square with stop, 1 x 7 mm, 1 wooden folding rule, 2 m, 1 pocket tape rule, m, 1 rule, 3 mm, 1 hacksaw with 1 sawblades, 24 teeth, 4 files, 2 mm, H2 (flat, semicircular, round, triangular), 1 Ideal plate shears, 24 mm, 1 triangular scraper, 2 mm, 1 pair of nylon safety goggles part

8 Tool sets 1662 Tool set (9-part) Suitable tool holder assortments (see cat.-no ) and suitable tool cabinets (see cat.-no. 821) not included x 12 hexagonal socket wrench bits, size 4-13 mm, 1 reversible ratchet, 14 mm, 1 handle with sliding piece, 1 Cardan joint, 1 extension, mm, socket wrench bits for Allen screws, size 3 / 4 / / 6 / 8 mm, 3 bits for slotted screws, 4 /, / 6, mm, 2 bits for Phillips recess head screws, PH 1 / 2, 2 bits for Phillips recess head screws, PZ 1 / 2, 9 double open-end wrenches, size 6-23 mm, 8 hexagon wrenches, size 2-1 mm, 1 jeweller s screwdriver with 4 blades, 4 screwdrivers,,6 x 3, x 7 /,8 x 4, x 9 / 1, x, x 1 / 1,2 x 7 x 12 mm, 2 Phillips screwdrivers, PH 1 / 2, 1 offset screwdriver, 4 x 4 mm, 1 hand vice, 13 mm, 2 machinist s hammers, 2 / g, 1 centre punch, Ø 4 mm, 8 drive pin punches with guide sleeve,,9 up to,9 mm, 1 flat chisel, blade width 18 mm, 1 combination pliers, 16 mm, 1 flat round-nosed pliers, 16 mm, 1 long-nose flat pliers, 16 mm, 1 waterpump pliers, 24 mm, 1 diagonal cutting pliers, 16 mm, 1 pocket slide calliper, 1 mm, 1 pocket tape rule, m, 1 junior hacksaw, 146 mm, 4 files, 2 mm, H2 (flat, semicircular, round, triangular), 6 die sinker's files, 1 mm, H2 (flat, flat point, semicircular, round, triangular, square), 1 file card, 11 x 4 mm, 1 precision tweezers, 13 mm, 1 awl, 1 Ideal plate shears, 24 mm, 1 precision mechanic's scraper, 8 mm, 1 oiler, 6 ml part 21 Performance requires quality. Screwdrivers by ATORN: ATORN s high-quality hand tools

9 1663 Suitable tool holder assortments (see cat.-no ) and suitable tool cabinets (see cat.-no. 821) not included. Tool set (12-part) x 12 hexagonal socket wrench bits, size 4-13 mm, 1 reversible ratchet, 14 mm, 1 handle with sliding piece, 1 Cardan joint, 1 extension, mm, socket wrench bits for Allen screws, size 3 / 4 / / 6 / 8 mm, 3 bits for slotted screws, 4 /, / 6, mm, 2 bits for Phillips recess head screws, PH 1 / 2, 2 bits for Phillips recess head screws, PZ 1 / 2, v 14 hexagonal socket wrench bits, size 1-32 mm, 1 reversible ratchet, 2 mm, 1 handle with sliding piece, 1 Cardan joint, 2 extension pieces, 12 / 2 mm, 1 ea. adjustable wrench, for sizes - 2 mm and - 3 mm, 11 double open-end wrench, size 6-32 mm, 12 double-ended ring wrench, size 6-32 mm, 7 screwdrivers,,4 x 2, x /, x 3 x 8 /,6 x 3, x 12 /,8 x 4 x 1 / 1 x, x 1 / 1,2 x 7 x 12 / 1,6 x 1 x 17 mm, Phillips screwdrivers, PH 1 / 2 / 3, PZ 1 / 2, 1 machinist's hammer, g, 1 plastic hammer, Ø 32 mm, 1 centre punch, Ø 4 mm, 2 drift punches, 2 / 3 mm, 1 flat chisel, cutting edge width 18 mm, 1 cape chisel, cutting edge width, mm, 1 combination pliers, 18 mm, 1 waterpump pliers, 24 mm, 1 high-leverage diagonal cutting pliers, 16 mm, 1 diagonal cutting pliers, 14 mm, 1 pocket tape rule, 3 m, 1 junior hacksaw with 12 saw blades, 32 teeth, 1 metal saw frame with 1 saw blades, 24 teeth Suitable tool holder assortments (see cat.-no ) and suitable tool cabinets (see cat.-no. 821) not included. Tool set (129 part) v 14 hexagonal socket wrench bits, size 1-32 mm, 1 reversible ratchet, 2 mm, 1 handle with sliding piece, 1 Cardan joint, 2 extension pieces, 12 / 2 mm, 1 adjustable wrench, for size up to 27 mm, 11 double open-end wrenches, size 6-32 mm, 21 combination wrenches, size 6-32 mm, 12 double-ended ring wrench, size 6-32 mm, 1 tyre lever, 4 mm, 8 hexagon wrench, size 2 / 2, / 3 / 4 / / 6 / 8 / 1 mm, screwdrivers,,8 x 4, x 9 / 1 x, x 1 / 1,2 x 7 x 12 / 1,6 x 1 x 17 / 2, x 14 x 2 mm, 4 Phillips screwdrivers, PH 1 / 2, PZ 1 / 2, 1 machinist's hammer, g, 1 soft face hammer, Ø 3 mm, 1 centre punch, Ø 4 mm, 4 drive pin punches, Ø 3 / 4 / / 6 mm, 2 flat chisels, cutting edge width 18 / 24 mm, 1 combination pliers, 18 mm, 1 internal snap ring pliers, for borehole Ø 19-6 mm, 1 external snap ring (circlip) pliers, for shaft Ø 19-6 mm, 1 waterpump pliers, 24 mm, 1 diagonal cutting pliers, 14 mm, 1 pocket tape rule, 3m, 1 junior hacksaw with 12 saw blades, 32 teeth, 1 metal saw frame with 1 saw blades, 24 teeth, 4 files, 2 mm, H2 (flat, semicircular, round, triangular), 1 wire brush, 4rows, 1 triangular scraper, 2 mm, 1 lubricator, 2 ml, 1 nylon safety goggles. Hand tools part part

10 Tool sets 61 Multi-purpose tool set (72-part) In bag made of grained cowhide. 61 Size Contents 1 junior hacksaw with multi-purpose sawblade 2 mm, 1 drill saw x 27 mm, 1 bevelled edge chisel 1 mm, 1 saw rasp 32 mm, 1 flat file cut 2 with handle 1 mm, 1 round file cut 2 with handle 1 mm, 1 multi-purpose scissors, straight 19 mm, 1 wire scratch brush 4 rows, 1 wall scraper mm, 1 plaster bowl, 1 flat stone chisel 2 mm, 1 pointed stone chisel 2 mm, 1 electrician s stone chisel 14 x 2 mm, 1 centre punch 12 x 1 mm, 1 machinist s hammer g, 1 double face blacksmith s hammer 1,2 kg, 1 Rabitz pincer 2 mm, 1 combination pliers 18 mm, 1 radio pliers 16 mm, 1 waterpump pliers 24 mm, 1 angled pipe tongs 1 inch, 3 screwdrivers 4 x 1, x 1, 7 x 1 mm, 2 Phillips screwdrivers PH 1 and 2, 1 voltage tester 1-2 V, 1 cable stripping knife, folding type with 1 blade, 1 pocket tape measure 2 m, 1 wooden folding rule 2 m, 1 aluminium spirit level 4 mm, 8 carbide-tipped masonry drills 2 ea., 6, 8, 1 Ø mm, 19 twist drills HSS,, mm increments 19 twist drills HSS,, mm increments 1-1 mm, 1 twist drill index box, 2 ring wrenches size 13 x 17, 19 x 24 mm, 3 double-ended spanners size 8 x 1, 13 x 17, 19 x 24 mm, 8 hexagon wrenches in box 2-1 mm. 611 In bag made of grained cowhide. Plumber s tool set (38-part) Application For general maintenance work in heaters, air conditioners, sanitary and installation. Contents part In leather bag Contents Size 1 angled pipe tongs S-jaws 1.1/2 inch / 42 mm, 1 waterpump pliers 24 mm, 1 combination pliers DIN mm, 1 carpenter's pincers DIN mm, 1 strap pipe wrench 23 x mm, 1 armature wrench 6 x 27 mm, 1 tube cutter up to 42 mm Ø, 1 basin wrench size 3 x 23 mm, 1 sanitary wrench size 17 x 1, M1, 1 sanitar cross wrench 3/8-1 inch, M8 - M12, 1 radiator valve wrench with ratchet 3/8-1 inch, 1 inside tube pliers 12-28/ 23 mm, 1 tube cutter up to 3 mm Ø, 1 tap seat reamer set 3/8-1 inch, 1 drain cleaner 13 mm, 1 cat tong trowel 4 /16 mm, 1 wall scraper, mm, 1 plaster bowl, 1 round brush 3 mm, 1 junior hacksaw, 1 engineers's file flat H 1 2 mm, 1 file handle, beechwood 13 mm, 1 hand wire brush 4 rows V2A-steel wire, 1 set of hexagon wrenches, 7-part in folding holder size 2, - 1 mm, 1 ea. workshop screwdriver, x 3, x 8 /,8 x, x 1 / 1, x 6, x 12 / 1,2 x 7, x 1 mm, 1 ea. Phillips screwdriver PH 1 and 2, 1 triangular hollow scraper 2 mm, 1 machinist's hammer, with hickory handle g. 1 double face blacksmith's hammer with ashwood handle 1,2 kg, 1 punch 12 x 12 mm, 1 pointed stone chisel 4 mm, 1 flat stone chisel 3 mm, 1 metal shears, right side cutting 3 mm, 1 wooden folding rule 2 m. Contents part In leather bag

11 Hand tools Electrician s tool set (42-part) In bag made of grained cowhide with 42essential high-quality tools for electrical installation. All VDE-tools routine-tested in compliance with VDE 68/T21, IEC Contents Size 1 VDE combination pliers 18 mm, 1 VDE round-nose pliers 16 mm, 1 VDE telephone pliers 2 mm, 1 VDE diagonal cutting pliers 16 mm, 1 VDE cable shears 23 mm, 1 VDE wire stripper 16 mm, 1 multi-purpose pliers with PVC coated non-slip handles, 2 mm, 1 electronics diagonal cutting pliers 12 mm, 1 cable stripping knife, folding type, 1 blade and 2 scrapers, 1 Jokari cable stripping knife, 1 multi-purpose scissors, straight, 1 plastic folding rule, 2 m, 1 pointed stone chisel 2 mm, 1 flat stone chisel 2 mm, VDE hexagonal socket wrenches size, 6, 7, 8, 1 mm, 8 hexagon wrenches on ring 2-1 mm, 6 VDE screwdrivers Q 2, x 7 / 3, x 1 / 4 x 1 /, x 1, D 1 and 2, 1 VDE voltage tester 12-7 V, 1 electronics screwdriver Q 3 x 3 mm, 2 angled screwdrivers with hand guard Q size,, D 1 and 2, 1 machinist s hammer g, 1 double face blacksmith s hammer 1,2 kg, 1 electrician s stone chisel 14 x 2 mm, 1 Puk junior hacksaw, adjustable, with multi-purpose sawblade, 1 aluminium spirit level 4 mm. Contents part In leather bag Electrician s assembly tool case (26-part) Bag made of cowhide, black, aluminium-reinforced frame, fold-out front wall, carrying handle, quick-action locks, bottom studs, fixing rings, bottom tray made of sheet steel, galvanised, front bag, toolholder on front and back side. With 26 essential high-quality tools for electrical installation projects. All VDE tools routine-tested in compliance with VDE 68/T21, IEC Contents Size 1 combination pliers with ergosoft handles 16 mm, 1 radio pliers, angled nose, with ergosoft handles 16 mm, 1 diagonal cutting pliers with ergosoft handles 16 mm, 1 wire stripper with ergosoft handles 16 mm, 1 VDE cable stripping knife, straight, 1 machinist s hammer 3 g, 1 double face blacksmith s hammer 1 kg, 1 electrician s stone chisel 1 x 8 x 2 mm, 1 flat stone chisel 3 mm, 1 junior hacksaw PUK with multi-purpose sawblade, 1 plaster bowl made of rubber, 1 wooden folding rule, 2 m, 1 flat brush width 3 mm, 1 wall scraper width 4 mm, 6 VDE screwdrivers Q 2, x 8 / 3, x 1 / 4 x 1 /, x 12 mm, D PH 1 and 2, 6 screwdrivers Q voltage tester 3 x 146 mm, 1-2 V, Q 4 x 1 / x 1 / 7 x 1 mm, D PH 1 and 2. Contents part In leather bag

12 Tool sets 97 Tool set (2-part) V 2-part, in 2-component soft foam insert. Safety-Insert system: All tools are stored vibration-free, missing tools are evident at once.. Application Suitable for all HAZET tool carts -Assistent- with drawers combination wrenches size 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 / 24 mm, 8 ring wrenches size 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 21 x 22 mm part Tool set (6-part) V 6-part, in 2-component soft foam insert. Safety-Insert system: All tools are stored vibration-free, missing tools are evident at once.. Application Suitable for all HAZET tool carts -Assistent- with drawers. x 12 hexagonal socket wrench bits size 4 / /, / 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 mm, J Allen key screwdriver bits size 3 / 4 / / 6 / 8 mm, Q 3 screwdriver bits,6 x 3, / 1 x, / 1,2 x 8 mm, D 2 Phillips screwdriver bits PH 1 / PH 2, E 2 Phillips screwdriver bits PZ 1 / PZ 2, 1 reversible ratchet, 1 T-handle, 1 bit holder, 2 extension pieces / 147 mm, 1 Cardan joint. v 21 hexagonal socket wrench bits size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / 23 / 24 / 26 / 27 / 28 / 3 / 32 / 34 mm, 1 reversible ratchet, 1 T-handle, 2 extension pieces 123 / 248 mm, 1 Cardan joint part Tool set (7-part) V 7-part, in 2-component soft foam insert. Safety-Insert system: All tools are stored vibration-free, missing tools are evident at once.. Application Suitable for all HAZET tool carts -Assistent- with drawers. x 4 TORX socket wrench bits E 4 / / 6 / 7 / 8, C 11 TORX screwdriver bits with borehole T 6 / 7 / 8 / 9 / 1 / 1 / 2 / 2 / 27 / 3 / 4, M 1 TORX screwdriver bit long T 2, 1 bit reversible ratchet, w> 12 hexagonal socket wrench bits size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 mm, 4 4 TORX socket wrench bits E 1 / 11 / 12 / 14, M 2 TORX screwdriver bits T 4 / 4, 1 reversible ratchet, 3 extensions 74 / 1 / 24 mm, 1 Cardan joint, 2 connectors 1/4 J x 1/4. inch and 1/4 J x 3/8. inch, v4 4 TORX socket wrench bits E 16 / 18 / 2 / 24, M 3 TORX screwdriver bits T / / 6, 4 4 TORX ring wrenches E 6 x 8 / 1 x 12 / 14 x 18 / 2 x 24, M 11 TORX wrenches T 6 / 7 / 8 / 9 / 1 / 1 / 2 / 2 / 27 / 3 / 4, M 1 TORX trinamic screwdrivers T 6 / 7 / 8 / 9 / 1 / 1 / 2 / 2 / 27 / part

13 973 Tool set (27-part) V 27-part, in 2-component soft foam insert. Safety-Insert system: All tools are stored vibration-free, missing tools are evident at once.. Hand tools Application Suitable for all HAZET tool carts -Assistent- with drawers. 973 Q 6 trinamic screwdriver for slotted screws,4 x 2, /, x 3 /,6 x 3, /,8 x 4 / 1,2 x 6, / 1,2 x 8, mm, D 2 trinamic Phillips screwdrivers PH 1 / PH 2, M TORX trinamic screwdrivers screwdrivers T 1 / 1 / 2 / 2 / 3, Q 1 ULTRA screwdriver short 1, x, mm, D 1 ULTRA Phillips screwdriver short PH 2, 1 machinist's hammer, 1 centre punch, 4 drive pin punches, 2 flat chisels, 1 combination pliers, 1 flat round-nosed pliers, 1 diagonal cutting pliers, 1 waterpump pliers part 11 V 1677 Tool set (9 pcs.) x 13 hexagonal socket wrench bits, size 4-14 mm, 1 reversible ratchet, 11 mm, 1 handle with joint, 143 mm, 1 T-handle, 11 mm, 1 handle grip, 134 mm, 2 extensions, / 147 mm, 1 Cardan joint, v 19 hexagonal socket wrench bits, size 1-34 mm, 1 reversible ratchet, 27 mm, 2 extensions, 123 / 248 mm, 1 T-handle, 298 mm, 1 Cardan joint, 2 adjustable wrenches, up to 18 resp. 28 mm, 1 double open-end wrenches, size 6-32 mm, 1 double open-end wrenches, size 6-32 mm, 7 screwdrivers,,4 x 2, x 7 /, x 3 x 8 /,6 x 3, x 1 /,8 x 4 x 1 / 1 x, x 1 / 1,2 x 8 x 1 / 1,6 x 1 x 17 mm, Phillips screwdrivers, PH 1 / 2 / 3, PZ 1 / 2, 1 machinist s hammer, g, 1 soft face hammer, Ø 3 mm, 2 flat chisels, blade width 18 / 24 mm, 1 cape chisel, blade width 6 mm, 2 drift punches, Ø 2 / 4 mm, 1 centre punch, shank Ø 12 mm, 3 multi-purpose pliers, 18 / 26 / 31 mm, 1 flat round-nosed pliers, 2 mm, 1 high-leverage diagonal cutting pliers, 17 mm, 1 high-leverage diagonal cutting pliers, 16 mm, 1 metal hacksaw, incl. 1 sawblade, 3 mm, 1 junior metal hacksaw, incl. 1 sawblade, 1 mm, 1 tape rule, 2 m part

14 Tool sets Tool cabinet 1679 V Tool set (116-part) Suitable tool cabinet and tool holding fixtures see cat.-no x 1 hexagonal socket wrench bits, size 4-11 mm, 1 reversible ratchet, 11 mm, 2 extensions, / 147 mm, 1 Cardan joint, v 2 hexagonal socket wrench bits, size 1-32 mm, 1 reversible ratchet, 27 mm, 2 extensions, 123 / 248 mm, 1 T-handle, 298 mm, 1 Cardan joint, 4 hexagonal sockets with screwdriver bit, size / 6 / 8 / 1 mm, 11 double open-end wrenches, size 6-32 mm, 17 combination wrenches, size 6-24 mm, 7 Allen keys, size 2-8 mm (set on ring), 7 TORX wrenches, T 8-4 (on ring), 4 workshop screwdrivers,,8 x 4 x 1 / 1 x, x 12 / 1,2 x 8 x 1 / 1,6 x 1 x 17 mm, 4 Phillips screwdrivers, PH 1 / 2, PZ 1 / 2, 1 machinist s hammer, g, 1 soft face hammer, Ø 3 mm, 2 flat chisels, blade width 18 / 24 mm, 4 drive pin punches, Ø 3 / 4 / / 6 mm, 1 centre punch, shank Ø 1 mm, 3 Multi-purpose pliers, 18 / 26 / 31 mm, 1 diagonal cutting pliers, 16 mm, 1 flat round-nosed pliers, 163 mm, 1 internal snap ring pliers, straight, for borehole Ø 19-6 mm, 1 external snap ring pliers, straight, for shaft Ø 19-6 mm, 1 tape rule, 2 m, 1 metal hacksaw, incl. 1 sawblade, 3 mm, 1 junior metal hacksaw, incl. of 1 sawblade 1 mm, 1 ea. round file, flat file, triangular file 2 mm, cut no. 2, 1 flat scraper, blade width 23 mm part Tool set (11-part) V 1681 x 11 hexagonal socket wrench bits, size 4-14 mm, hexagonal socket wrench bits with screwdriver bit, size 3 / 4 / / 6 / 8 mm, 4 screwdriver bits,,6 x 3, /,8 x 4 / 1 x, / 1,2 x 8 mm, 7 socket wrench bits for Phillips recess screws, PH 1-4, PZ 1-3, 1 reversible ratchet, 11 mm, 2 extensions, / 147 mm, 1 T-handle 11 mm, 1 handle 134 mm, 1 Cardan joint, v 2 hexagonal socket wrench bits, size 1-32 mm, 1 reversible ratchet, 27 mm, 2 extensions, 123 / 248 mm, 1 T-handle, 298 mm, 1 Cardan joint, 1 torque wrench, 4-2 Nm, 12 double open-end wrenches, size 6-32 mm, 12 double open-end wrenches, size 6-32 mm, 2 combination wrenches, size 6-32 mm, 7 Allen keys, size 2 / 2, / 3 / 4 / / 6 / 8 mm, on ring, 3 hexagonal socket wrenches with T-handle size 1 / 12 / 13 mm, 4 screwdrivers,,4 x 2 x 63 /,6 x 3, x 1 / 1 x, x 12 / 1,6 x 1 x 17 mm, 4 Phillips screwdrivers, PH 1 / 2, PZ 1 / 2, 2 Multi-purpose pliers, 18 / 26 mm, 2 machinist's hammers, 2 / g, 1 plastic soft face hammer, Ø 3 mm, 2 flat chisels, blade width 18 / 24 mm, 4 drive pin punches, Ø 3 / 4 / / 6 mm, 1 centre punch, shank Ø 1 mm, 1 flat scraper, blade width 23 mm, 2 self-locking multi-purpose pliers, 8-3 / 6- mm clamping range, 1 diagonal cutting pliers, 163 mm, 1 flat round-nosed pliers, 1 mm, 1 metal hacksaw, incl. 1 sawblade, 3 mm, 1 junior metal hacksaw, incl. 1 sawblade, 1 mm, 1 ea. round file, flat file, triangular file 2 mm, cut no. 2, 1 tape rule, 2 m, 1 magnetic retrieving tool, 2 mm, adhesive power 18 g, 1 oil squirt can (empty), 1 ml part

15 V 1683 Tool cabinets (empty) Made from high quality steel, powder-coated. With blinds, lockable with padlock. With perforated steel rear panels and side panels for individual storage of different tool assortements. With cabinet fixture device (see diagram) Tool holding fixtures With storage guide for tool set 116-part (cat.-no ). Tools not included. Figure shows an example. Application For mounting to the rear panel of the cabinet cat.-no Tool cabinet (empty) and tool holding fixtures Hand tools Cabinet Fixture W x D x H Weight mm kg empty 64 x 2 x for 116 parts 12 Performance requires quality. Tool carts by ATORN: ATORN s high-quality workshop furnishings

16 Tool sets 981 J Calendered, chrome-plated, slim design. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of double open-end wrenches DIN 311, ISO Size mm 9-part 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 21 x 23 / 22 x part 26 x 28 / 27 x 29 / 3 x J Calendered, chrome-plated, fine heads, ring end with OGV profile and offset 1. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of combination wrenches DIN 3113 A, ISO 7738 A Size mm 16-part 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 22 / part 27 / 29 / 3 / J 14-part, calendered, chrome-plated. Open end with ratchet operation. Ring end with OGV profile and offset 1. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Application Open end can be used like a reversible ratchet: Tighten the nut without removing the wrench (1), automatic -grip- to the next edge for a new tightening movement (2). Set of combination wrenches (1) (2) Size mm 14-part 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 22 / J 36-part, calendered, chrome-plated. In drawer Set of hexagonal socket wrenches N 1 hexagonal bits with OGV profile size, / 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 mm, J 4 bits for Allen screws size 3 / 4 / / 6 mm, Q 3 bits for slotted screws, 4, / 6, / 8 mm, E 2 bits for Phillips recess head screws PZ 1 / 2, 1 adapter, 1/4 inch square x 1/4 inch hexagonal (bit), 1 reversible ratchet, 1 handle with sliding piece, 1 bit holder, 1 Cardan joint, 1 ea. extension and 1 mm, J 1 hexagon wrenches size 2 / 2, / 3 / 4 / / 6 / 7 / 8 / 9 / 1 mm. module made of plastics, compatible with Facom tool carts and tool boxes part

17 981 J 21-part, calendered, chrome-plated. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of hexagonal socket wrenches Hand tools 981 N 17 hexagonal bits with OGV profile size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 / 23 / 24 / 27 / 3 / 32 mm, 1 reversible ratchet, 1 Cardan joint, 1 ea. extension 12 and 2 mm part J 7-part, galvanised, ergonomic handle. Hexagonal with Hex-Plus profile. Ball-shaped head (size 3 mm without) for tightening applications up to 3 inclination. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of hexagon wrenches with ball head Number of Size 9816 wrenches mm 7 3 / 4 / / 6 / 7 / 8 / J 7-part, burnished, ergonomic T-handle. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of TORX wrenches Application By use of the ergonomic handle, both ends of the key can be used very efficiently. TORX selector see cat.-no Number of Size 9821 wrenches T 7 1 / 1 / 2 / 2 / 27 / 3 / J 7-partIn drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of hammering tools machinist s hammer 8 g, 1 plastic hammer 38 g, with inserts Ø 32 mm, 1 centre punch Ø 6 mm, 3 drive pin punches, Ø 3,9 / / 4,9 /,9 mm, 1 flat chisel18 mm part

18 Tool sets 9818 J 11 -part, with handle. Damping handle, non-slip and ergonomically shaped, with finger guard. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of hammering tools centre punch Ø 6 mm, 4 drift punches Ø 3,9 / 4,9 /,9 / 7,8 mm, 6 drive pin punches Ø 1,9 / 2,9 / 3,9 / 4,9 /,9 / 7,9 mm part Pliers set J 2-part, consists of 1 waterpump pliers with -bimaterial-coated handles, 2 mm and 1grip pliers with aluminium coating, 2 mm, clamping range max. 4 mm. In drawer module made of plastics, compatible with Facom tool carts and tool boxes part 11 J 4-part, clamping range Ø 18-6 mm. In drawer module made of plastics, compatible with Facom tool carts and tool boxes. Set of snap ring (circlip) pliers internal snap ring pliers, straight jaws, 1 internal snap ring pliers, angled jaws 9, 1 external snap ring pliers, straight jaws, 1 external snap ring pliers, angled jaws part J All VDE tools routine-tested in compliance with VDE 68/T 21, IEC 9. Electrician s tool set (1-part) 983 Q VDE screwdrivers for slotted screws 2, / 3, / 4 /, / 6, mm, D 3 VDE screwdrivers for Phillips recess head screws PH / 1 / 2, 1 VDE diagonal cutting pliers, 1 VDE combination pliers, 1 VDE wire stripper, 1 multi-purpose crimping pliers for insulated terminals, 1 electronics diagonal cutting pliers, 1 electronics needle-nose pliers with diagonal cutting pliers, 1 cable stripping knife with recess for stripping insulation part

19 98 TCS tool set (98-part) Hand tools 98 (1) (2) Consists of 9 TCS (Tool Control-System) inserts with 98 tools. Resistant to chemicals, perfect fit of the tools, with easy access. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Suitable tool carts see cat.-no (3) (4) TCS insert Contents Size (1) 1 double open-end wrenches size 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / size 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 2 x 22 / 24 x 27 / 3 x 32 mm. (2) 18 combination wrenches size 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / 24 mm. (3) 1 socket wrench bits, hexagonal size, / 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 mm, 1 reversible ratchet 117 mm, 1 T-handle 116 mm, 1 bit holder 1 mm, 1 Cardan joint 37 mm, 2 extension pieces / 1 mm, 1 bit holder 2 mm, 1 hexagon wrenches, in holder 1, / 2 / 2, / 3 / 4 / / 6 / 8 / 1 / 12 mm. (4) 1 reversible ratchet 26, mm, 1 T-handle 3 mm, 1 Cardan joint 71 mm, 3 extension pieces 2 / 13 / 2 mm. () 17 socket wrench bits, hexagonal size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / 24 / 27 / 3 / 32 mm. (6) 4 workshop screwdrivers,6 x 3, x 7 /,8 x 4 x 1 / 1 x, x 12 / 1,2 x 6, x 1 mm, 3 Phillips screwdrivers PH 1 / 2 / 3. (7) 1 machinist's hammer g, 1 nylon hammer Ø 3 mm, 2 drive pin punches 6 x 1 / 6 x 17 mm, 1 drive pin punch with guide bushings 3,4 x 1 mm, 1 flat chisel 17 mm. (8) 1 combination pliers 18 mm, 1 flat round-nosed pliers 2 mm, 1 waterpump pliers 24 mm, 1 high-leverage diagonal cutting pliers 16 mm. (9) 1 internal snap ring (circlip) pliers J 2 (19-6 mm), 1 external snap ring (circlip) pliers A 2 (19-6 mm), 1 self-locking multi-purpose pliers 2 mm. () (6) (7) (8) (9) part

20 Tool sets 986 Set of combination wrenches DIN 3113 A, ISO 7738 A Ring end with AS-Drive profile, offset 1, chrome-plated, slim, flat heads, chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access.. 2-layer, 2- colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases. Suitable tool carts see cat.-no Size mm 17-part 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 / part 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / part 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 / 24 / 27 / 3 / 32 / Sets of offset ring wrenches DIN 838, ISO 114 Suitable tool carts see cat.-no Deeply offset on both ends, AS-Drive profile, rings with thin walls and polished, chrome-plated, made of chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases Size mm 8-part 6 x 7 / 8 x 9 / 1 x 11/ 12 x 13 / 14 x 1 / 16 x 17 / 18 x 21 / 19 x part 6 x 7 / 8 x 9 / 1 x 11/ 12 x 13 / 14 x 1 / 16 x 17 / 18 x 21 / 19 x 22 / 24 x 27 / 3 x Set of hexagonal socket wrenches 33-part, chrome-plated, chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases. Suitable tool carts see cat.-no N 11 hexagonal bits with AS-Drive profile size /, / 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 mm, J bits for Allen screws size 3 / 4 / / 6 / 8 mm, Q 3 bits for slotted screws,6 x 3, / 1, x, / 1,2 x 8 mm, D 4 bits for Phillips recess head screws PH 1 / 2 / 3 / 4, E 2 bits for Phillips recess head screws PZ 1 / 2, 1 bit holder, 1/4 inch square x 1/4 inch hexagonal (bit). 1 reversible ratchet, 1 handle with sliding piece, 1 bit holder, 1 Cardan joint, 1 connecting piece (1/4 x 3/8 inch), 1 ea. extension, 4 / 1 mm part

21 987 Set of hexagonal socket wrenches Hand tools 23-part, chrome-plated, chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access.. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases. Suitable tool carts see cat.-no N 16 hexagonal bits with AS-Drive profile size 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 mm, 1 reversible ratchet, 1 Cardan joint, 1 ea. connecting piece 1/4 x 3/8 inch and 1/2 x 3/8 inch, 1 ea. extension, 76 / 12 / 24 mm part Ratchet set part, chrome-plated, chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases. Suitable tool carts see cat.-no reversible ratchet, 1 handle with sliding piece, 1 Cardan joint, 1 ea. extension, 2 / 13 / 2 mm part Set of socket wrenches Chrome-plated, chrome-alloy steel. Tool Control System: resistant to chemicals, perfect fit of the tools, with easy access. 2-layer, 2-colour system: top black, bottom yellow. If there is no sign of yellow, all the tools are there. Compatible with Stahlwille tool carts and tool cases. Suitable tool carts see cat.-no N 17 hexagonal bits with AS-Drive profile size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / 24 / 27 / 3 / 32 mm, A 13 double hexagonal bits with AS-Drive profile size 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 3 mm, A 2 socket wrench bits, long, double hexagonal with AS-Drive profile size 22 / 27 mm N 17 hexagonal bits with AS-Drive profile size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 / 24 / 27 / 3 / 32 mm, part part

22 Tool sets 99 N In large insert (T 31 x B 31 mm) made of impactproof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of combination wrenches DIN 3113 A/B, ISO 7738 A/B part, 17 combination wrenches, ring end with UD profile and offset 1, with sectional shank, chrome-plated, rings polished. 8 hexagon wrenches in holder part, 17 combination wrenches, ring end with UD profile and 1 depressed centre, slim, flat heads, chrome-plated, rings polished. 8 hexagon wrenches in holder part, combination wrenches, ring end with UD profile and offset 1, with sectional shank, chrome-plated, rings polished combination wrenches size 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 2 / 21 / 22 mm, J 8 hexagon wrenches size 2 / 2, / 3 / 4 / / 6 / 8 / 1 mm combination wrenches 23 / 24 / 27 / 3 / 32 mm part 11 2-part 12 -part N 1-part, ratchet-type loosening or quick tightening with the ring ratchet (UD profile) in one go. Precision serration (72 teeth), low height. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof Set of ratchet combination wrenches ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems Size mm 1-part 8 / 1 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / N 1-part, jaw angle 1, chrome-plated, with flat, finely ground heads. In large insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of double open-end wrenches DIN 311, ISO Size mm 1-part 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 2 x 22 / 21 x 23 / 24 x N 8-part, deeply offset on both ends. Thin-walled, polishing rings with UD profile, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For Set of offset ring wrenches DIN 838, ISO 114 the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems Size mm 8-part 6 x 7 / 8 x 9 / 1 x 11 / 12 x 13 / 14 x 1 / 16 x 17 / 18 x 19 / 2 x

23 9917 N -part, heads 1 offset. Hexagonal jaw 3 offset, UD profile jaw 1 offset, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impactproof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of double open-end wrenches DIN 3118 Hand tools Size mm -part 8 x 1 / 1 x 11 / 12 x 14 / 13 x 1 / 17 x N 37-part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of hexagonal socket wrenches 992 N 12 hexagonal bits size 4 / /, / 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 mm, J bits for Allen screws size 3 / 4 / / 6 / 8 mm, 4 6 bits for outer TORX screws E 4 / / 6 / 7 / 8 / 1, G 9 bits for inner TORX screws T 8 / 9 / 1 / 1 / 2 / 2 / 27 / 3 / 4, 1 reversible ratchet, 1 handle with sliding piece, 1 bit holder with plastic handle, 1 Cardan joint, 1 extension 97 mm part N 24-part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of hexagonal socket wrenches 992 N 14 hexagonal bits size 6 / 7 / 8 / 9 / 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 mm, J bits for Allen screws size 4 / / 6 / 8 / 1 mm, 1 reversible ratchet, 1 handle with sliding piece, 1 Cardan joint, 1 ea. extension 12 / 2 mm part

24 Tool sets 9927 N 39-part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of socket wrenches and screwdriver bits 9927 J 6 hexagonal bits long, size 4 / / 6 / 7 / 8 / 1 mm, M 7 bits for inner TORX screws T 2 / 2 / 27 / 3 / 4 / 4 /, M 7 bits for inner TORX screws long, T 2 / 2 / 27 / 3 / 4 / 4 /, 4 8 bits for outer TORX screws E / 6 / 7 / 8 / 1 / 11 / 12 / 14, Q socket wrench bits for slotted screws, / 6, / 8 / 1 / 12 mm, D 3 socket wrench bits for Phillips recess head screws PH 1 / 2 / 3, E 3 bits for Phillips recess head screws PZ 1 / 2 / part Ratchet set N -part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, 1 reversible ratchet, 1 handle with sliding piece, 1 Cardan joint, 1 ea. extension 12 / 2 mm. black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems part N 26-part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of socket wrenches and screwdriver bits 9932 N 19 hexagonal bits size 1 / 11 / 12 / 13 / 14 / 1 / 16 / 17 / 18 / 19 / 21 / 22 / 23 / 24 / 26 / 27 / 28 / 3 / 32 mm, J 7 bits for Allen screws size 6 / 7 / 8 / 9 / 1 / 12 / 14 mm part N 1-part, chrome-plated. In 1/3 small insert (T 17, x B 31 mm) made of impact-proof ABS plastics, black shagreened. For the GEDORE insert system of tool carts and rolling workbenches with variable drawer division systems. Set of hexagon screwdrivers 9933 J 9 bits for Allen screws size / 6 / 7 / 8 / 9 / 1 / 12 / 14 / 17 mm, J 6 long bits for Allen screws size -9 / 6-9 / 8-9 / 1-14 / / mm part