Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320

Transcription

1 Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page

2 Gauge Stand with Hardened Steel Anvil Series 7 Standard version Fine adjustment 1 mm Table flatness 1.3 µm Squareness table-stem hole 0.4/100 µm/mm Standard accessories Description Flat anvil Serrated anvil 21JAA316 Bushing Ø 8 Optional accessories Description Convex anvil Ø58 Table dimensions Column Ø Max. measurement height Measuring table Ø Serrated (101462) Ø Flat (101461) Ø Serrated (101462) Stem hole ø ø 3/8" (9,53 mm), 8 mm with bush (standard accessory) ø 3/8" (9,53 mm), 8 mm with bush (standard accessory) ø 3/8" (9,53 mm), 8 mm with bush (standard accessory) ø30 80 ø8 / ø µm SR20 Ø 58 Ø32 Ø ø ,

3 Gauge Stand with Hardened Steel Anvil Fine adjustment 1 mm ( : screw on column) Table flatness 1.3 ( ) 2.3 ( , ) µm Squareness tablestem 0.4/100 µm/mm hole Series 215, Series 7 Standard version Standard accessories Description 21JAA316 Bushing Ø 8 21JAA329 Bushing Ø 8 21JAA330 Bushing Ø 9,53 21JAA316 only for JAA329 and 21JAA330 only for Optional accessories Description 21JAA331 Bushing Ø 15 21JAA331 : only for Table dimensions Column Ø Max. measurement height Stem hole ø x ø 3/8" ø 9,53 mm /ø 8 mm with bush x ø 3/8" 9,53 mm/ø 8 mm with bush x ø 20 mm (ø 8 mm/ø 3/8" ø 9,53 mm with bush)

4 Gauge Stand with Hardened Steel Anvil Series 913 Standard version Simple standard version. Column Ø Optional accessories 22 mm Description Horizontal measuring bow for comprehensive measuring applications. Centre distance : max Table dimensions Max. measurement height Stem hole ø ø mm x mm with Stand for Precision Bore Gauge Series 215 For batch-measurement of small parts. Optional accessories Description Detachable angle stop for safe and quick workpiece positioning under the measuring instrument, for Ø Maximum measuring height Table dimensions Measuring stroke ø 60 max

5 Gauge Stand with Granite Base Series 912 This gauge stand comes with a wear-resistant black granite table Base size Table dimensions Column Ø Max. measurement height Throat Arm ø Stem hole ø x 100 x x Table flatness [µm] Series 912 Black granite, fine diamond-lapped measuring table. Arm with 120 mm projection Base size 260 x 140 x 50 Table dimensions Column Ø Max. measurement height Throat Fine adjustment Stem hole ø Table flatness [µm] 200 x mm

6 Gauge Stand with Granite Base Series 215 This jointed magnetic stand offers you the following benefits: It comes with a mechanical locking system and allows fine adjustment. You can also fix a dial indicator in any position by mechanically clamping the articulated arm. Standard accessories Description 21JAA316 Bushing Ø 8 21JAA329 Bushing Ø 8 21JAA330 Bushing Ø 9,53 21JAA316 for , , JAA329 and 21JAA330 for Optional accessories Description 21JAA331 Bushing Ø 15 only for Table dimensions Column Ø Max. measurement height Fine adjustment x x x x Stem hole ø ø 3/8"/ ø 9,53mm (Ø 8 mm with bush) ø 3/8" /ø 9,53mm (ø 8 mm with bush) ø 3/8"/ ø 9,53mm (ø 8 mm with bush) ø 20 mm (ø 8 mm/3/8" 9,53 mm with bush) Table flatness [µm] Squareness table-stem hole [µm/mm] / / / /100 ø30 80 ø40 95 ø8 / ø9.53 ø8 / ø9.53 (160) µm 3.5µm (180) 200 (120) ( ) ø ø20 / ø9.53 / ø8 3.5µm

7 Jointed Magnetic Stand Series 011 with mechanical locking system and fine adjustment Allows a dial indicator to be fixed in any position by mechanically clamping the articulateded arm Clamping device Clamping force (vertical) [N] Base size (LxWxH) Total height Stem hole ø Working radius Thread Arm/Base magnetic x 30 x M6 x magnetic x 50 x M8 x magnetic x 50 x M8 x magnetic x 50 x M8 x

8 Jointed Magnetic Stand Series 7 This jointed magnetic stand offers you the following benefits: It comes with a mechanical locking system and allows fine adjustment. You can also fix a dial indicator in any position by mechanically clamping the articulated arm. Standard accessories Description 02AZA292 Bush for ø 8 stem 12.7 ø ø6 ø Clamping device Clamping force (vertical) [N] Base size (LxWxH) Fine adjustment Total height Working radius Stem hole ø Thread Arm/ Base 7033B magnetic x 60 x 55 ± , 8, 3/8" 1.75 M8 x Flexible Jointed Arm Series 011 / 56A Thread M 8 x 1.25 mm 56AAK793 Mechanical clamping Dimensions: see 7033B Mechanical clamping Dimensions : see Mechanical clamping Dimensions : see Working radius Stem hole ø ± ± ±400 8 Magnetic Base Series 011 / 7 V-block type. Base size Clamping force (vertical) Threaded bore [N] x 50 x M 8 x 1.25 mm B 50 x 60 x M 8 x 1.25 mm B 326

9 Base size (LxWxH) Stem hole ø 59 x 50 x 55 mm ø8mm with stem bush mm Magnetic Stand Series 7 V-block base type. Standard accessories Description 02AZC291 Reducing sleeve to hold 8 stems Optional accessories Description 02AZC cross arm 7010SN 7011SN 7010SN Base size (LxWxH) Stem hole ø 7011SN 58 x 50 x 55 mm ø8mm with stem bush mm Clamping device Fine adjustment Total height Working radius Thread Arm/Base 7010SN magnetic None M8 x SN magnetic yes M8 x 1.25 Series 7 With V-block base and flexible arm. Standard accessories Description 02AZC291 Reducing sleeve to hold 8 stems ø9.53 ø16 (330) (396) M (W) 58 (D) Total height Working radius Clamping device Thread Arm/Base magnetic M8 x

10 Magnetic Stand Series 7 This is a mini type of magnetic stand that offers you the following benefits: Mini measuring stand without magnet ON/OFF. It is designed to accept dial test indicators with 6mm or 8mm diameter stems, or dovetail. Base size (LxWxH) Stem hole ø Ø 8 Ø 6 ø 30 mm 6 / 8 mm Ø 6 Ø Clamping force (vertical) Total height Working radius Clamping device [N] [g] 7014 magnetic Ø 30 Series 913 Specially suitable for attaching to cylindrical parts. Magnetic base. Base size (LxWxH) Stem hole ø 114 x 88 x 38 mm 4 / 8 mm Clamping device Clamping force (vertical) [N] Total height Working radius Minimum workpiece diameter magnetic Pneumatic Stand Series 913 Adheres to all smooth surfaces such as granite, polished steel, etc. Base diameter Stem hole ø 90 mm 8 mm Clamping force (vertical) Total height Clamping device Vertical arm Cross arm [N] pneumatic x ø x ø

11 Precision Bench Centre Stem hole ø Standard accessories 56AAK066 56AAK426 02AZA292 ø 8 mm with stem bush mm Description Stand Stand Bush for ø 8 stem 56AAK066 Stand for , AAK426 Stand for Series 967 These precision bench centres are used for cylindrical and tapered parts. They offer you the following benefits: You can make fast and precise checks of runout on cylindrical/tapered parts. The base and centre-stocks are manufactured from stress-relieved and aged cast iron. The centres are made from hardened and precision ground steel Max. workpiece weight Stand Ød Min-Max A L1 L2 B C H Ø D AAK AAK AAK Stroke Stroke 329

12 Precision Vice Series 930 This is a precision vice with a threaded spindle type that offers you the following benefits: It is made of tool steel, hardened and precision ground. It has a horizontally ground V-groove in the movable jaw. Parallelism Squareness mm / 100 mm mm / 100 mm A B C D E F G H I M M M M Series 930 This is a precision vice with a threaded spindle type that offers you the following benefits: It is made of tool steel, hardened and precision ground. It includes one key bar with hydraulic amplification of the clamping force. It has a horizontally ground V-groove in the movable jaw. Parallelism Squareness mm / 100 mm mm / 100 mm A B C D E F G max. H I J Height x Depth M 6 10 x

13 Parallelism Squareness mm / 100 mm mm / 100 mm Precision Vice Series 930 This precision vice has a pull-down clamping action and offers you the following benefits: It gives you high accuracy for precision grinding, milling, measuring and eroding. It is made of tool steel, hardened and precision ground With horizontally ground V-groove in the movable jaw A B C D E F G max. H I J Height x Depth M M5 8 x M6 12 x M8 12 x With quick adjustment and vertically and horizontally ground V-groove in the movable jaw J A B C D E F G max. H I Height x Depth M 6 8 x M 6 10 x Parallelism Squareness mm / 100 mm mm / 100 mm Series 930 This is a front axis sine vice that offers you the following benefits: It is made of tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max A B C D E F G max. H I J Height x Depth M M M

14 Precision Sine Vice Series 930 This is a rear axis sine vice that offers you the following benefits: It is made of tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max. 46. Parallelism mm / 100 mm Squareness mm / 100 mm Setting accuracy at 45 ±15" A B C D E F G max. H I J M Series 930 This is a longitudinal axis sine vice that offers you the following benefits: It is made of tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max. 46. Parallelism mm / 100 mm Squareness mm / 100 mm Setting accuracy at 45 ±15" A B C D E F G max. H I M

15 Precision Sine Vice Parallelism mm / 100 mm Squareness mm / 100 mm Setting accuracy at 45 ±15" Series 930 This is a compound-axis sine vice that offers you the following benefits: It is made of tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max A B C D E F G max. H I J M Precision Sine Plate Parallelism mm / 100 mm Squareness mm / 100 mm Setting accuracy at 45 ±15" Series 930 This is a front axis sine vice that offers you the following benefits: It is made of tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max

16 Precision Sine Plate Series 930 This is a Precision Sine Plate made of alloyed tool steel that offers you the following benefits: It is made of alloyed tool steel, hardened and precision ground. Its bearing and holding bolt is hardened and ground. Using the clamping device you can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max. 46. Parallelism mm / 100 mm Squareness mm / 100 mm Setting accuracy at 45 ± 15" Compound-axis type With M6 clamping holes Coumpound-axis type With lever-operated magnetic chuck Front-axis type With lever-operated magnetic chuck

17 Cast Iron V-Block Hardness HBW Parallelism between V-groove and 16 µm base surface Difference of the height of the pair 16 µm Delivered in pairs Series 910 Made of dense special cast iron, highly wear resistant. The 90 V-block cutting angle is parallel to the base and ismetric in pairs. For scribing, adjusting and testing cylindrical parts Length Width Height Max. workpiece ø Cast Iron V-Block Hardness HBW Parallelism between V-groove and 16 µm base surface Difference of the height of the pair 16 µm Delivered in pairs Series 911 These are quadruple-v type V-Blocks, that offer you the following benefits: 90 V-blocks enable you to scribe, adjust and test cylindrical parts. There are two V-blocks per set Length Width Height Max. workpiece ø

18 Hardened Steel V-Block Series 181 These Hardened Steel V-Blocks have clamp brackets and offer you the following benefits: There are two V-blocks per set. The feature V-angle 90 clamping brackets. Contact faces are ground and lapped. Designed as a fixture to enable you to check cylindrical precision machined parts. Hardness HRC Parallelism between V-groove and all side 6 µm surfaces Perpendicularity between V-grooves and 9 µm back surface Difference of the height of the pair 12 µm Symmetry of the V-grooves 6 µm Delivered In pairs Sample application Length Width Height Max. workpiece ø Magnetic V-Block Series 181 These Magnetic V-Blocks are a regular-length type and offer you the following benefits: Contact faces are ground and lapped. They are of regular length with two differently sized, 90 V-grooves. You can use them for holding ferromagnetic cylindrical parts for scribing, adjusting, testing, etc. Parallelism between V- groove and all side surfaces Perpendicularity between V- grooves and back surface 10 µm Difference of the height of the pair Symmetry of the V-grooves 10 µm Delivered µm µm µm µm 10 µm In pairs ( and ) Individually ( ) Length Width Height Max. receiver for workpiece V-groove 1 Ø Max. receiver for workpiece V-groove 2 Ø Magnetic force [N]

19 Cast Iron Surface Plate Accuracy According to DIN 876 Grade 1 : fine scraped Grade 3 : fine planed Series 902 These Cast Iron Surface Plates are rigid but not heavy, and offer you the following benefits: A ribbed design gives you rigidity with minimum weight, and a special cast iron confers a high degree of wear resistance. The working surface is finished to DIN 876 according to grade, with the outside edges milled clean Accuracy Grade 1 Dimensions L x W x H x 300 x x 400 x x 400 x x 500 x x 500 x x 750 x x 800 x x 1000 x x 1000 x Accuracy Grade 3 Dimensions L x W x H x 300 x x 400 x x 400 x x 500 x x 500 x x 750 x x 800 x x 1000 x x 1000 x

20 Granite Surface Plate DIN876 Series 901 These Granite Surface Plates offer you the following benefits: They are made of exceptionally fine-grained black granite. Delivery is without a stand but with steel ball inserts. Accuracy Grade 0 Dimensions L x W x H Max. Load x 250 x x 400 x x 400 x x 630 x x 630 x x 1000 x x 800 x 160 1, x 1000 x 160 1, x 1000 x 220 1,500 1,320 Accuracy According to DIN 876 Vickers hardness HV Flexural strength N/mm 2 Compressive strength Approx. 280 N/mm 2 Linear coefficient of expansion (5 to 7,5) x 10-6 x K -1 Optional accessories Description P Granite cleaner Accuracy Grade 00 Dimensions L x W x H Max. Load x 250 x x 400 x x 400 x x 630 x x 630 x x 1000 x x 800 x x 1000 x x 1000 x ,320 Granite plate and stand (optional) Stress relieved for maximum stability. Harder than steel. Accuracy Grade 1 Dimensions L x W x H Max. Load x 250 x x 400 x x 400 x x 630 x x 630 x x 1000 x x 800 x 160 1, x 1000 x 160 1, x 1000 x 220 1,500 1,320 Accuracy Grade 2 Dimensions L x W x H Max. Load x 250 x x 400 x x 400 x x 630 x x 630 x x 1000 x x 800 x 160 1, x 1000 x 160 1, x 1000 x 220 1,500 1,320 Stand Plate dimensions L x W x H x 400 x x 630 x x 630 x x 1000 x x 800 x x 1000 x x 1000 x

21 Granite Surface Plate DIN876 Accuracy According to DIN 876 Grade 0 Series 901 These Granite Surface Plates are made of exceptionally fine-grained black granite. Optional accessories Description P Granite cleaner 901-MC1000 / C-S1000 Accuracy Grade 0 Dimensions L x W x H 901-MC x 250 x MC x 400 x MC x 400 x MC x 630 x MC x 500 x MC x 630 x MC x 1000 x MC x 800 x MC x 1000 x 180 1, MC x 1000 x 220 1,500 Stand Suitable for Stand dimensions L x W x H granite plate C-S MC x 400 x C-S MC x 630 x C-S MC x 500 x C-S MC x 630 x C-S MC x 1000 x C-S MC x 800 x 790 mm 40 C-S MC x 1000 x 790 mm 55 C-S MC x 1000 x 790 mm 70 Granite Square 90 Accuracy Grade 00 Flatness DIN 876 Perpendicularity DIN 875 Delivered In a wooden case, with certificate of inspection Series 972 This Granite Square 90 offers you the following benefits: It is made of natural hard stone, with two sides precision ground. It is hard and wear resistant. Width Leg length x x x x

22 Combination Square Set Series 180 This Combination Square Set offers you the following benefits: Three heads are attachable to the stainless steel rule (blade), enabling you to take versatile measurements of various types of workpiece. The heads are hardened U Square head U Metric U Description Combination set : square head ( U) center head ( U) protractor head ( U) 300 mm blade size ( U) [g] 1110 Blade (individual) Range Graduation [g] U 150mm 1 mm. 0.5 mm. 1 mm. 0.5 mm U 300mm 1 mm. 0.5 mm. 1 mm. 0.5 mm U Center head Head (individual) Description [g] U Square head, hardened and ground, with spirit level and scriber U Centre head, hardened and quenched U Reversible protractor head,with spirit level, bidirectional graduation from 0 to U Revesible protectorhead 340

23 Universal Bevel Protractor Graduation 5 ' ( ) Circle division 4 x 90 Delivery In a box Standard accessories Description Blade Blade Holder for Height Gauges with 9 x 9 scriber shaft for , for , for Height Gage with 9x 9 mm scriber shaft Optional accessories Description Acute angle attachment standard accessory for Series 187 This Universal Bevel Protector offers you the following features: Its high-precision angle gauge enables you to take accurate angle measurements of machines, moulds and jigs. You can attach it to height gauges. It comes with a magnifying glass with height gage holder with magnyfing glass Metric Blade edge angle Blade length [g] w/60, 45 and 30 edges 150, 300 mm w/60 and 45 edges 150 mm w/60 and 45 edges 300 mm 1085 Graduation 5' Circle division 4 x 90 Delivered in a box with acute angle attachment Series 187 Standard accessories Description Acute angle attachment Optional accessories Description Holder for height gauges with 9 x 9 scriber shaft Application with acute angle attachment Fixed blade length Adjustable blade length [g]

24 Digimatic Universal Protractor Series 187 This is a Digimatic Universal Protractor with data output that offers you the following features: It has an easy-to-read digital display. It automatically turns off after 10 minutes, and gives you fixed reference points for easy adjustment. You can slide and clamp the measuring blade over the entire length. You can make fine adjustments to precisely adjust arbitrary angle dimensions. It comes with a mounting facility on height gauges and tracers of series 192 via holder. Functions Series 187 ON/OFF DATA/HOLD Data output Zero set PRESET Angle sexagesimal/decimal Range Repeatability 1' (0.01 ) Digital step 1' (0.01 ) Display LCD with Character Height 6.5 mm Max. permissible error 2' (0.03 ) Battery life approx hours Delivered in a box including battery Holder Standard accessories Description Blade Blade Holder for Height Gauges with 9 x 9 scriber shaft for for for , Optional accessories Description Acute angle attachment Digimatic cable (1 m) Digimatic cable (2 m) 02AZD790F Connecting cable U-Wave 06ADV380F USB Input Tool Direct cable (2 m) Consumable spares 05SAA217D Description Lithium battery CR-2032 Metric Blade length [g] mm mm

25 Precision Level Dimensions (WxDxH) 200 x 44 x 38.2 mm Vee angle 140 Delivered In a wooden case Series 960 For use in setting machined surfaces precisely horizontal Sensibility (mm/m per division) Sensibility "(Arcsecond) " " " Max. Permissible Error (inidication accuracy) ±0.5 graduations = ±0.05 mm/m ±0.5 graduations = ±0.025 mm/m ±0.7 graduations = ±0.014 mm/m Flatness of reference face (bottom) [µm] Precision Frame Level Dimensions (WxDxH) 200 x 44 x 200 mm Vee angle 140 Delivered In a wooden case Series 960 This Precision Frame Level offers you the following benefits: You can set machined surfaces to precisely horizontal or vertical. It has 2 vee and 2 flat reference faces, and is precision ground. It features graduated main (longitudinal) and auxiliary (transverse) vials Sensibility (mm/m per division) Max. Permissible Error (indication accuracy) [mm/m] ±0.03 graduations = ±0.03 mm/m ±0.3 graduations = ±0.015 mm/m ±0.5 graduations = ±0.015 mm/m Flatness of reference faces [µm] Parallelism of reference the faces [µm] Sensibility "(Arcsecond) Perpendicularity of reference faces [µm]

26 Digital Precision Level Series 950 This Digital Precision Level offers you the following benefits: You can measure flatness, squareness and angularity. Precision support surfaces in aluminium frame provide you with high rigidity and low weight Range 360 (4 x 90 ) Power supply Standard battery (9 V) GLRG1 Battery life ca. 500 hours Delivered Including box Optional accessories 50AAA983A 64PPP794 - Note: 50AAA983A is for only Description RS-232C 25 pin signal cable with foot switch Magnetic V-block for securing to magnetic workpieces Max. permissible error (degrees) Horizontal : 0.1 Vertical : (0 to 10) 0.1 (80 to 90) 0.2 (10 to 80) Repeatability (degrees) Model Data output Sensitivity (degrees) [g] 0.1 Pro Pro (0 to 9.99) 0.1 (10 to 90) 300 Distance between two M 3 x 0,5 mm Mounting holes Thickness Gauge Series Thickness Gauge Size clearly stamped on each leaf. Leaves are easy to remove and can be individually locked open. Metric Range Accuracy Number of leaves S mm by 0.05 mm steps 0.05 up to 0.15 mm : ±0.005 mm 0.20 up to 0.50 mm : ±0.012 mm 0.55 up to 1.00 mm : ±0.020 mm Leaf length S 344

27 90 Steel Square Accuracy According to DIN 875 Try type: internal perpendicularity grade 1 external perpendicularity grade 0 flatness/straightness grade 0 Beveled edge type: internal perpendicularity grade 0 external perpendicularity grade 00 flatness/straightness grade 00 Series 916 This 90 Steel Square offers you the following benefits: Three types of square are available. It is hardened, and has precision ground edges B B B Bevelled-edge square Outside squareness Inside squareness Cross section Leg length [µm] [µm] B x 6 50 x B x 6 75 x B x x B x x B x x 130 Bevelled-edge square with shoulders Outside squareness Inside squareness Leg length [µm] [µm] B x B x B x B x 130 Try square Outside squareness Inside squareness Cross section Leg length [µm] [µm] B x 4 50 x B x 4 75 x B x x B x x B x x B x x B x x B x x 250 Try square with shoulders Outside squareness Inside squareness Leg length [µm] [µm] B x B x B x B x B x B x B x B x B x B x

28 Knife Edge Straight Edge Series 528 This Knife Edge Straight Edge offers you the following benefits: Its straight edges are especially suited to testing the flatness of surfaces. It has a hardened, ground and micro lapped measuring edge. Accuracy According to DIN 874 Section 60 Series 528 Remarks Length Supplied in a wooden case Supplied in a wooden case Supplied in a wooden case 500 Steel Rules Series 182 These are fully and semi-flexible rules that offer you the following benefits: They have clear graduations on satin-chrome finish. The rules are stainless tempered. Metric Fully-flexible rule Range Graduation Width mm 1 mm. 5 mm (on both sides) 12 mm mm 1 mm. 5 mm (on both sides) 12 mm mm 1 mm. 5 mm (on both sides) 18 mm mm 1 mm. 5 mm (on both sides) 18 mm Series 182 These are wide, rigid types of steel rules that offer you the following benefits: They have clear graduations on satin-chrome finish. The rules are stainless tempered. Metric Range Graduation Width mm 1 mm - 0,5 mm (on both faces) 25 mm mm 1 mm - 0,5 mm (on both faces) 30 mm mm 1 mm - 0,5 mm (on both faces) 30 mm 346